The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing
Open accessAbstract
Although 3D printing has the potential to transform manufacturing processes, the strength of printed parts often does not rival that of traditionally-manufactured parts. The fused-filament fabrication method involves melting a thermoplastic, followed by layer-by-layer extrusion of the molten viscoelastic material to fabricate a three-dimensional object. The strength of the welds between layers is controlled by interdiffusion and entanglement of the melt across the interface. However, diffusion slows down as the printed layer cools towards the glass transition temperature. Diffusion is also affected by high shear rates in the nozzle, which significantly deform and disentangle the polymer microstructure prior to welding. In this paper, we model non-isothermal polymer relaxation, entanglement recovery, and diffusion processes that occur post-extrusion to investigate the effects that typical printing conditions and amorphous (non-crystalline) polymer rheology have on the ultimate weld structure. Although we find the weld thickness to be of the order of the polymer size, the structure of the weld is anisotropic and relatively disentangled; reduced mechanical strength at the weld is attributed to this lower degree of entanglement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The theory of polymer dynamics
Doi, M., & Edwards, S. F. (1986) · Cited by 12,020
The Theory of Polymer Dynamics
Marrucci, G. (1987) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/0377-0257(87)85036-x · Cited by 9,749
Williams, M. L., Landel, R. F., & Ferry, J. D. (1955) · Journal of the American Chemical Society · doi:10.1021/ja01619a008 · Cited by 8,083
Physical Properties of Polymers Handbook
(2007) · Springer eBooks · doi:10.1007/978-0-387-69002-5 · Cited by 3,429
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
A theory crack healing in polymers
Wool, R. P., & O’Connor, K. M. (1981) · Journal of Applied Physics · doi:10.1063/1.328526 · Cited by 1,093
Physical properties of polymers handbook
(1996) · Choice Reviews Online · doi:10.5860/choice.34-2186 · Cited by 1,047
Quantitative theory for linear dynamics of linear entangled polymers
Likhtman, A. E., & McLeish, T. C. B. (2002) · Macromolecules · doi:10.1021/ma0200219 · Cited by 666
Fracture mechanics studies of crack healing and welding of polymers
Jud, K., Kausch, H. H., & Williams, J. G. (1981) · Journal of Materials Science · doi:10.1007/bf00552073 · Cited by 595
Graham, R. S., Likhtman, A. E., McLeish, T. C. B., & Milner, S. T. (2003) · Journal of Rheology · doi:10.1122/1.1595099 · Cited by 499
Croccolo, D., De Agostinis, M., & Olmi, G. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2013.06.041 · Cited by 369
Likhtman, A. E., & Graham, R. (2003) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(03)00114-9 · Cited by 362
Polymer interfaces: Structure and strength
(1996) · Reactive and Functional Polymers · doi:10.1016/s1381-5148(96)90013-9 · Cited by 352
Infrared thermography of welding zones produced by polymer extrusion additive manufacturing
Seppala, J. E., & Migler, K. B. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.007 · Cited by 322
Interdiffusion and marker movements in concentrated polymer-polymer diffusion couples
Kramer, E. J., Green, P., & Palmstrøm, C. J. (1984) · Polymer · doi:10.1016/0032-3861(84)90205-2 · Cited by 304
Healing of Thermoplastic Polymers at an Interface under Nonisothermal Conditions
Yang, F., & Pitchumani, R. (2002) · Macromolecules · doi:10.1021/ma010858o · Cited by 277
On compatibility of the Cox-Merz rule with the model of Doi and Edwards
Ianniruberto, G., & Marrucci, G. (1996) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/0377-0257(96)01433-4 · Cited by 233
Suitability of PLA/TCP for fused deposition modeling
Drummer, D., Cifuentes‐Cuéllar, S., & Rietzel, D. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211272045 · Cited by 210
Polymer-polymer diffusion in melts
Brochard, F., Jouffroy, J., & Levinson, P. (1983) · Macromolecules · doi:10.1021/ma00244a016 · Cited by 185
McIlroy, C., & Olmsted, P. D. (2017) · Journal of Rheology · doi:10.1122/1.4976839 · Cited by 182
Self-citationDeposition direction-dependent failure criteria for fused deposition modeling polycarbonate
Hill, N., & Haghi, M. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2013-0039 · Cited by 164
Polymer Interfaces: Structure and Strength,
George, G. A. (1996) · Polymer Degradation and Stability · doi:10.1016/0141-3910(96)81803-9 · Cited by 152
Molecular Dynamics Simulations of Polymer Welding: Strength from Interfacial Entanglements
Ge, T., Pierce, F., Perahia, D., Grest, G. S., & Robbins, M. O. (2013) · Physical Review Letters · doi:10.1103/physrevlett.110.098301 · Cited by 140
Convective constraint release (CCR) revisited
Ianniruberto, G., & Marrucci, G. (2013) · Journal of Rheology · doi:10.1122/1.4843957 · Cited by 112
The performance of the hot end in a plasticating 3D printer
Mackay, M. E., Swain, Z. R., Banbury, C., Phan, D. D., & Edwards, D. A. (2017) · Journal of Rheology · doi:10.1122/1.4973852 · Cited by 101
McIlroy, C., & Olmsted, P. D. (2024) · Figshare · Cited by 95
Self-citationFast Mutual Diffusion in Polymer Blends
Composto, R. J., Mayer, J. W., Krämer, E. J., & White, D. M. (1986) · Physical Review Letters · doi:10.1103/physrevlett.57.1312 · Cited by 91
Continuum and Discrete Modeling of Craze Failure at a Crack Tip in a Glassy Polymer
Sha, Y., Hui, C., Ruina, A. L., & Krämer, E. J. (1995) · Macromolecules · doi:10.1021/ma00111a044 · Cited by 89
Zhang, X., Wicaksono, H., Fujii, M., Tomimura, T., & Imaishi, N. (2002) · International Journal of Thermophysics · doi:10.1023/a:1016394104244 · Cited by 78
de Gennes, P. G. (1989) · Journal de physique · doi:10.1051/jphys:0198900500180255100 · Cited by 75
Relation between the Width of an Interface between Two Polymers and Its Toughness
Brown, H. R. (2001) · Macromolecules · doi:10.1021/ma991821v · Cited by 71
Mutual diffusion in blends of long and short entangled polymer chains
Jordan, E. A., Ball, R. C., Donald, A. M., Fetters, L. J., Jones, R., & Klein, J. E. (1988) · Macromolecules · doi:10.1021/ma00179a045 · Cited by 58
Adhesion at interfaces between highly entangled polymer melts
Schach, R., & Creton, C. (2008) · Journal of Rheology · doi:10.1122/1.2901231 · Cited by 47
Ilg, P., & Kröger, M. (2011) · Journal of Rheology · doi:10.1122/1.3523485 · Cited by 38
Quantitative appraisal of a new CCR model for entangled linear polymers
Ianniruberto, G. (2014) · Journal of Rheology · doi:10.1122/1.4903495 · Cited by 38
Diffusion of linear polymer melts in shear and extensional flows
Hunt, T. A., & Todd, B. D. (2009) · The Journal of Chemical Physics · doi:10.1063/1.3202868 · Cited by 35
Polymer–polymer mutual diffusion via rheology of coextruded multilayers
Zhao, R. X., & Macosko, C. W. (2007) · AIChE Journal · doi:10.1002/aic.11136 · Cited by 32
Model for the fracture energy of glassy polymer–polymer interfaces
Benkoski, J. J., Fredrickson, G. H., & Krämer, E. J. (2002) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10288 · Cited by 32
Anisotropic mobility model for polymers under shear and its linear response functions
Uneyama, T., Horio, K., & Watanabe, H. (2011) · Physical Review E · doi:10.1103/physreve.83.061802 · Cited by 26
Cited by
Fused filament fabrication of polymer materials: A review of interlayer bond
Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., & Wang, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101658 · Cited by 418
Bhandari, S., Lopez-Anido, R. A., & Gardner, D. J. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100922 · Cited by 355
Das, A., Gilmer, E. L., Biria, S., & Bortner, M. J. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01228 · Cited by 305
Process-structure-property effects on ABS bond strength in fused filament fabrication
Abbott, A. C., Tandon, G. P., Bradford, R. L., Koerner, H., & Baur, J. W. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.002 · Cited by 291
3D‐Printed Anisotropic Polymer Materials for Functional Applications
Chen, J., Liu, X., Tian, Y., Zhu, W., Yan, C., Shi, Y., Kong, L. B., Qi, H. J., & Zhou, K. (2022) · Advanced Materials · doi:10.1002/adma.202102877 · Cited by 281
Metadata
- Authors
- McIlroy, C., & Olmsted, P. D.
- Venue
- Polymer
- Publisher
- Elsevier BV
- Published
- 2017-08
- Volume
- 123
- Pages
- 376-391
- ISSN
- 0032-3861 (ISSN-L)
- OpenAlex
- W2724156092
- Cited by
- 308
- References
- 40
- FWCI
- 19.32
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.