The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Technological Elements of Circular Economy and the Principles of 6R-Based Closed-loop Material Flow in Sustainable Manufacturing
Open accessAbstract
At the current alarming growth rate of the world's consumption, the linear economy model of creating products, using these products, and then disposing of them, with no consideration of the environmental, societal and economic impacts and consequences, is a flawed manufacturing approach that is unsustainable. Therefore, envisioning a future where nothing is wasted; a future where every “waste” becomes an asset, and no value goes unrecovered; a future where all products at the end of their primary use are recovered and either reused, remanufactured, or recycled for multiple generations, has become more than a reality, but a necessity. This emerging concept of circular economy, although gaining attention, lacks a technological perspective for effective implementation. This paper presents the principles of sustainable manufacturing to serve as the basis, and to provide the technological elements to ensure the creation of a circular economy. 6R-based technological elements are identified and shown as essential ingredients for achieving economic growth, environmental protection and societal benefits. Also presented is a case study with application that shows the life cycle cost benefits. An outlook for future research is then presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cradle to cradle: remaking the way we make things
(2002) · Choice Reviews Online · doi:10.5860/choice.40-0914 · Cited by 3,829
Economics of Natural Resources and the Environment
Segerson, K., Pearce, D. W., & Turner, R. K. (1991) · Land Economics · doi:10.2307/3146419 · Cited by 2,308
Why sustainability is now the key driver of innovation
Nidumolu, R., Prahalad, C. K., & Rangaswami, M. R. (2013) · IEEE Engineering Management Review · doi:10.1109/emr.2013.6601104 · Cited by 1,799
Jayal, A. D., Badurdeen, F., Dillon, O. W., & Jawahir, I. S. (2010) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2010.03.006 · Cited by 948
Self-citationWu, H.-Q., Shi, Y., Xia, Q., & Zhu, W.-D. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.10.003 · Cited by 277
Innovation in sustainable manufacturing education
Jawahir, I. S., Badurdeen, F., & Rouch, K. E. (2015) · DepositOnce · doi:10.14279/depositonce-4626 · Cited by 63
Self-citationZhang, X., Badurdeen, F., Rouch, K., et al. (2015) · DepositOnce · doi:10.14279/depositonce-4714 · Cited by 19
A Framework for Sustainable Material Selection for Multi-Generational Components
Bradley, R. (2015) · UKnowledge (University of Kentucky) · Cited by 7
Self-citation
Cited by
Govindan, K., & Hasanagic, M. (2018) · International Journal of Production Research · doi:10.1080/00207543.2017.1402141 · Cited by 1,522
The history and current applications of the circular economy concept
Winans, K., Kendall, A., & Deng, H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.123 · Cited by 1,024
Kristoffersen, E., Blomsma, F., Mikalef, P., & Li, J. (2020) · Journal of Business Research · doi:10.1016/j.jbusres.2020.07.044 · Cited by 841
Unlocking circular business: A framework of barriers and drivers
Tura, N., Hanski, J., Ahola, T., Ståhle, M., Piiparinen, S., & Valkokari, P. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.202 · Cited by 698
Towards a circular economy: An emerging economies context
Patwa, N., Sivarajah, U., Seetharaman, A., Sarkar, S., Maiti, K., & Hingorani, K. (2021) · Journal of Business Research · doi:10.1016/j.jbusres.2020.05.015 · Cited by 519
Moktadir, M. A., Rahman, T., Rahman, M. H., Ali, S. M., & Paul, S. K. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.063 · Cited by 512
Restorative and regenerative: Exploring the concepts in the circular economy
Morseletto, P. (2020) · Journal of Industrial Ecology · doi:10.1111/jiec.12987 · Cited by 407
Agyemang, M., Kusi-Sarpong, S., Khan, S. A., Mani, V., Rehman, S. T., & Kusi-Sarpong, H. (2019) · Management Decision · doi:10.1108/md-11-2018-1178 · Cited by 394
Rosa, P., Sassanelli, C., & Terzi, S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.117696 · Cited by 384
3D printing filament as a second life of waste plastics—a review
Mikula, K., Skrzypczak, D., Izydorczyk, G., Warchoł, J., Moustakas, K., Chojnacka, K., & Witek-Krowiak, A. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-10657-8 · Cited by 382
Circular economy transition in Italy. Achievements, perspectives and constraints
Ghisellini, P., & Ulgiati, S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118360 · Cited by 377
Moldavska, A., & Welo, T. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.08.006 · Cited by 316
Chowdhury, S., Dey, P. K., Rodríguez-Espíndola, O., Parkes, G., Tuyet, N. T. A., Long, D. D., & Ha, T. P. (2022) · Journal of Business Research · doi:10.1016/j.jbusres.2022.03.077 · Cited by 295
Design, management and control of demanufacturing and remanufacturing systems
Tolio, T., Bernard, A., Colledani, M., Kara, S., Seliger, G., Duflou, J., Battaia, O., & Takata, S. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.001 · Cited by 277
Dynamic capabilities and environmental accounting for the circular economy in businesses
Scarpellini, S., Marín-Vinuesa, L. M., Aranda-Usón, A., & Portillo-Tarragona, P. (2020) · Sustainability Accounting, Management and Policy Journal · doi:10.1108/sampj-04-2019-0150 · Cited by 268
Sartal, A., Bellas, R., Mejías, A. M., & García-Collado, A. (2020) · Advances in Mechanical Engineering · doi:10.1177/1687814020925232 · Cited by 263
Alamerew, Y. A., & Brissaud, D. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120025 · Cited by 262
Circular economy in manufacturing companies: A review of case study literature
Bjørnbet, M. M., Skaar, C., Fet, A. M., & Schulte, K. Ø. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126268 · Cited by 260
Environmental Sustainability of Digitalization in Manufacturing: A Review
Chen, X., Despeisse, M., & Johansson, B. (2020) · Sustainability · doi:10.3390/su122410298 · Cited by 257
Liu, Z., Adams, M., Cote, R. P., Chen, Q., Wu, R., Wen, Z., Liu, W., & Dong, L. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.038 · Cited by 154
Balu, R., Dutta, N. K., & Roy Choudhury, N. (2022) · Polymers · doi:10.3390/polym14224788 · Cited by 121
Cascading utilization of wood: a matter of circular economy?
Mair, C., & Stern, T. (2017) · Current Forestry Reports · doi:10.1007/s40725-017-0067-y · Cited by 101
Metadata
- Authors
- Jawahir, I. S., & Bradley, R.
- Venue
- Procedia CIRP
- Publisher
- Elsevier BV
- Published
- 2016
- Volume
- 40
- Pages
- 103-108
- ISSN
- 2212-8271 (ISSN-L)
- OpenAlex
- W2319267817
- Cited by
- 575
- References
- 8
- FWCI
- 62.45
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.