The DOI matches its Crossref record; 301 of the 301 references it cites were found in a registry or an index.
Biocomposites reinforced with natural fibers: 2000–2010
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Self-citationNatural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Isolation and characterization of nanofibers from agricultural residues – Wheat straw and soy hulls
Alemdar, A., & Sain, M. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.04.029 · Cited by 1,713
Self-citationDHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
Natural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Extraction of cellulose and preparation of nanocellulose from sisal fibers
Morán, J. I., Alvarez, V. A., Cyras, V. P., & Vázquez, A. (2008) · Cellulose · doi:10.1007/s10570-007-9145-9 · Cited by 1,507
Biodegradable composites based on lignocellulosic fibers—An overview
Satyanarayana, K. G., Arizaga, G. G. C., & Wypych, F. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.002 · Cited by 1,421
Rosa, M. F., Medeiros, E. S., Malmonge, J. A., Gregorski, K. S., Wood, D. F., Mattoso, L. H. C., Glenn, G., Orts, W. J., & Imam, S. H. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.01.059 · Cited by 1,099
Rong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047
Natural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A., Misra, M., Drzal, L., Selke, S., Harte, B., & Hinrichsen, G. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch1 · Cited by 976
Characterization of natural fiber surfaces and natural fiber composites
Sgriccia, N., Hawley, M. C., & Misra, M. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.07.007 · Cited by 954
Dynamic mechanical analysis of banana fiber reinforced polyester composites
Pothan, L. A., Oommen, Z., & Thomas, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00254-3 · Cited by 925
A study of the mechanical properties of short natural-fiber reinforced composites
Herrera-Franco, P. J., & Valadez-González, A. (2005) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2005.04.001 · Cited by 905
Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent
Lee, S.-H., & Wang, S. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.04.015 · Cited by 822
Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites
Jacob, M., Thomas, S., & Varughese, K. T. (2004) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00261-6 · Cited by 708
Mechanical properties of kenaf fibers and kenaf/PLA composites
Ochi, S. (2008) · Mechanics of Materials · doi:10.1016/j.mechmat.2007.10.006 · Cited by 708
Huda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.06.022 · Cited by 699
A review of bast fibres and their composites. Part 1 – Fibres as reinforcements
Summerscales, J., Dissanayake, N. P. J., Virk, A. S., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.06.001 · Cited by 683
Kenaf reinforced biodegradable composite
Nishino, T., Hirao, K., Kotera, M., Nakamae, K., & Inagaki, H. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00099-x · Cited by 676
Isolation of nanocellulose from pineapple leaf fibres by steam explosion
Cherian, B. M., Leão, A. L., de Souza, S. F., Thomas, S., Pothan, L. A., & Kottaisamy, M. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.03.046 · Cited by 673
Biocomposites from wheat straw nanofibers: morphology, thermal and mechanical properties
Alemdar, A., & Sain, M. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.05.044 · Cited by 661
Self-citationEcodesign of automotive components making use of natural jute fiber composites
Alves, C., Ferrão, P. M. C., Silva, A. J., Reis, L. G., Freitas, M., Rodrigues, L. B., & Alves, D. E. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.10.022 · Cited by 644
Impact and tensile properties of PLA/Cordenka and PLA/flax composites
Bax, B., & Müssig, J. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.004 · Cited by 637
A study of the effect of acetylation and propionylation surface treatments on natural fibres
Tserki, V., Zafeiropoulos, N. E., Simon, F., & Panayiotou, C. (2005) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.01.004 · Cited by 621
Thwe, M. M., & Liao, K. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00071-9 · Cited by 619
Maleated coupling agents for natural fibre composites
Keener, T. J., Stuart, R. K., & Brown, T. K. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.014 · Cited by 590
Influence of processing and chemical treatment of flax fibres on their composites
de Weyenberg, I. V., Ivens, J., Coster, A. D., Kino, B., Baetens, E., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00093-9 · Cited by 586
Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites
Thwe, M. M., & Liao, K. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00225-7 · Cited by 576
Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites
Filho, R. D. T., Scrivener, K. L., England, G. L., & Ghavami, K. (2000) · Cement and Concrete Composites · doi:10.1016/s0958-9465(99)00039-6 · Cited by 575
Processing of Cellulose Nanofiber-reinforced Composites
Bhatnagar, A., & Sain, M. (2005) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684405049864 · Cited by 544
Self-citationJoseph, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00098-2 · Cited by 538
Sisal cellulose whiskers reinforced polyvinyl acetate nanocomposites
Garcia de Rodriguez, N. L., Thielemans, W., & Dufresne, A. (2006) · Cellulose · doi:10.1007/s10570-005-9039-7 · Cited by 534
Biodegradable composites based on l-polylactide and jute fibres
Plackett, D., Løgstrup Andersen, T., Batsberg Pedersen, W., & Nielsen, L. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00100-3 · Cited by 531
The thermal and crystallisation studies of short sisal fibre reinforced polypropylene composites
Joseph, P. V., Joseph, K., Thomas, S., Pillai, C. K. S., Prasad, V. S., Groeninckx, G., & Sarkissova, M. (2003) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00185-9 · Cited by 530
Idicula, M., Malhotra, S. K., Joseph, K., & Thomas, S. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.10.023 · Cited by 530
Oil palm fiber (OPF) and its composites: A review
Shinoj, S., Visvanathan, R., Panigrahi, S., & Kochubabu, M. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.09.009 · Cited by 523
Dufresne, A., Dupeyre, D., & Vignon, M. R. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000628)76:14<2080::aid-app12>3.0.co;2-u · Cited by 523
Sain, M. M., Sung Heum, P. A. R. K., Suhara, F., & Law, S. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00280-5 · Cited by 522
Self-citationArbelaiz, A., Fernández, B., Ramos, J. A., Retegi, A., Llano-Ponte, R., & Mondragon, I. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.01.008 · Cited by 517
Joseph, P. V., Rabello, M. S., Mattoso, L. H. C., Joseph, K., & Thomas, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00080-5 · Cited by 515
Kaushik, A., Singh, M., & Verma, G. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.04.063 · Cited by 508
Rice-husk flour filled polypropylene composites; mechanical and morphological study
Yang, H.-S., Kim, H.-J., Son, J., Park, H.-J., Lee, B.-J., & Hwang, T.-S. (2004) · Composite Structures · doi:10.1016/s0263-8223(03)00179-x · Cited by 506
Sreekala, M. S., Kumaran, M. G., Joseph, S., Jacob, M., & Thomas, S. (2000) · Applied Composite Materials · doi:10.1023/a:1026534006291 · Cited by 489
HUDA, M., DRZAL, L., MOHANTY, A., & MISRA, M. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.10.015 · Cited by 489
Properties and performance of natural-fibre composites
Pickering, K. L. (2008) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845694593 · Cited by 484
Sreekala, M. S., George, J., Kumaran, M. G., & Thomas, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00219-6 · Cited by 482
The effects of acetylation on properties of flax fibre and its polypropylene composites
Bledzki, A. K., Mamun, A. A., Lucka-Gabor, M., & Gutowski, V. S. (2008) · Express Polymer Letters · doi:10.3144/expresspolymlett.2008.50 · Cited by 476
Self-citationVan de Weyenberg, I., Chi Truong, T., Vangrimde, B., & Verpoest, I. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.08.016 · Cited by 459
Bismarck, A., Aranberri‐Askargorta, I., Springer, J., Lampke, T., Wielage, B., Stamboulis, A., Shenderovich, I., & Limbach, H. (2002) · Polymer Composites · doi:10.1002/pc.10485 · Cited by 453
Effects of fibre treatment on wettability and mechanical behaviour of flax/polypropylene composites
Cantero, G., Arbelaiz, A., Llano-Ponte, R., & Mondragon, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00094-0 · Cited by 450
Natural fiber composites with plant oil-based resin
O'Donnell, A., Dweib, M. A., & Wool, R. P. (2004) · Composites Science and Technology · doi:10.1016/j.compscitech.2003.09.024 · Cited by 443
Charlet, K., Baley, C., Morvan, C., Jernot, J. P., Gomina, M., & Bréard, J. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.03.006 · Cited by 442
Bledzki, A. K., & Jaszkiewicz, A. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.06.005 · Cited by 415
Self-citationCarbon storage potential in natural fiber composites
Pervaiz, M., & Sain, M. M. (2003) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(02)00173-8 · Cited by 413
Self-citationStudy of moisture absorption in natural fiber plastic composites
WANG, W., Sain, M. M., & COOPER, P. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.07.027 · Cited by 411
Self-citationOptimising industrial hemp fibre for composites
Pickering, K. L., Beckermann, G. W., Alam, S. N., & Foreman, N. J. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2006.02.020 · Cited by 411
Panthapulakkal, S., & Sain, M. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25486 · Cited by 408
Self-citationCassava bagasse cellulose nanofibrils reinforced thermoplastic cassava starch
Teixeira, E. D. M., Pasquini, D., Curvelo, A. A. S., Corradini, E., Belgacem, M. N., & Dufresne, A. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.04.034 · Cited by 403
Mechanical properties of PLA composites with man-made cellulose and abaca fibres
Bledzki, A. K., Jaszkiewicz, A., & Scherzer, D. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.002 · Cited by 400
Self-citationMechanical property evaluation of natural fiber coir composite
Harish, S., Michael, D. P., Bensely, A., Lal, D. M., & Rajadurai, A. (2009) · Materials Characterization · doi:10.1016/j.matchar.2008.07.001 · Cited by 395
Haque, M. M., Hasan, M., Islam, M. S., & Ali, M. E. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.04.072 · Cited by 390
Chen, Y., Liu, C., Chang, P. R., Cao, X., & Anderson, D. P. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.11.030 · Cited by 384
Bamboo fibre filled natural rubber composites: the effects of filler loading and bonding agent
Ismail, H., Edyham, M. R., & Wirjosentono, B. (2002) · Polymer Testing · doi:10.1016/s0142-9418(01)00060-5 · Cited by 380
Mechanical properties of woven banana fibre reinforced epoxy composites
Sapuan, S. M., Leenie, A., Harimi, M., & Beng, Y. K. (2006) · Materials & Design · doi:10.1016/j.matdes.2004.12.016 · Cited by 377
Effect of chemical treatments on properties of green coconut fiber
Brígida, A. I. S., Calado, V. M. A., Gonçalves, L. R. B., & Coelho, M. A. Z. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.10.005 · Cited by 376
Demir, H., Atikler, U., Balköse, D., & Tıhmınlıoğlu, F. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.036 · Cited by 374
Araújo, J. R., Waldman, W. R., & De Paoli, M. A. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.07.021 · Cited by 371
Study of Structural Morphology of Hemp Fiber from the Micro to the Nanoscale
Wang, B., Sain, M., & Oksman, K. (2007) · Applied Composite Materials · doi:10.1007/s10443-006-9032-9 · Cited by 370
Self-citationMechanical properties of pineapple leaf fibre reinforced polypropylene composites
Arib, R. M. N., Sapuan, S. M., Ahmad, M. M. H. M., Paridah, M. T., & Zaman, H. M. D. K. (2006) · Materials & Design · doi:10.1016/j.matdes.2004.11.009 · Cited by 370
Manfredi, L. B., Rodríguez, E. S., Wladyka-Przybylak, M., & Vázquez, A. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.05.003 · Cited by 367
Bras, J., Hassan, M. L., Bruzesse, C., Hassan, E. A., El-Wakil, N. A., & Dufresne, A. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.07.018 · Cited by 366
Zafeiropoulos, N. E., Williams, D. R., Baillie, C. A., & Matthews, F. L. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00082-9 · Cited by 359
Effects of corona discharge and UV treatment on the properties of jute-fibre epoxy composites
Gassan, J. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00168-8 · Cited by 355
Beckermann, G. W., & Pickering, K. L. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.03.010 · Cited by 353
Arbelaiz, A., Fernández, B., Cantero, G., Llano-Ponte, R., Valea, A., & Mondragon, I. (2005) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.03.021 · Cited by 352
Development and effect of alkali treatment on tensile properties of curaua fiber green composites
Gomes, A., Matsuo, T., Koichi, G. O. D. A., & Junji, O. H. G. I. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.04.010 · Cited by 348
Flax fibre–polyester composites
Baiardo, M., Zini, E., & Scandola, M. (2004) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.02.004 · Cited by 347
BRAHMAKUMAR, M., PAVITHRAN, C., & PILLAI, R. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.09.020 · Cited by 345
Isolation of nanofibers from soybean source and their reinforcing capability on synthetic polymers
Wang, B., & Sain, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.12.015 · Cited by 344
Self-citationAnnie Paul, S., Boudenne, A., Ibos, L., Candau, Y., Joseph, K., & Thomas, S. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.06.004 · Cited by 341
Preparation and properties of recycled HDPE/natural fiber composites
Lei, Y., Wu, Q., Yao, F., & Xu, Y. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.02.001 · Cited by 337
Thermophysical properties of natural fibre reinforced polyester composites
Idicula, M., Boudenne, A., Umadevi, L., Ibos, L., Candau, Y., & Thomas, S. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.03.007 · Cited by 337
Liu, L., Yu, J., Cheng, L., & Qu, W. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.03.002 · Cited by 335
Dynamic mechanical behavior of short coir fiber reinforced natural rubber composites
Geethamma, V. G., Kalaprasad, G., Groeninckx, G., & Thomas, S. (2005) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.03.004 · Cited by 334
Sanchez-Garcia, M. D., Gimenez, E., & Lagaron, J. M. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.041 · Cited by 333
Liu, W., Misra, M., Askeland, P., Drzal, L. T., & Mohanty, A. K. (2005) · Polymer · doi:10.1016/j.polymer.2005.01.027 · Cited by 331
Banana Fiber Reinforced Polymer Composites - A Review
Venkateshwaran, N., & Elayaperumal, A. (2010) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684409360578 · Cited by 330
Yussuf, A. A., Massoumi, I., & Hassan, A. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0185-0 · Cited by 327
Non-isothermal degradation kinetics of filled with rise husk ash polypropene composites
Turmanova, S. C., Genieva, S. D., Dimitrova, A. S., & Vlaev, L. T. (2008) · Express Polymer Letters · doi:10.3144/expresspolymlett.2008.18 · Cited by 324
Mechanical properties of short-flax-fibre reinforced compounds
Bos, H. L., Müssig, J., & van den Oever, M. J. A. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.10.011 · Cited by 322
Effect of compatibilizing agents on rice-husk flour reinforced polypropylene composites
Yang, H.-S., Kim, H.-J., Park, H.-J., Lee, B.-J., & Hwang, T.-S. (2007) · Composite Structures · doi:10.1016/j.compstruct.2005.06.005 · Cited by 322
Rosa, M. F., Chiou, B.-S., Medeiros, E. S., Wood, D. F., Williams, T. G., Mattoso, L. H. C., Orts, W. J., & Imam, S. H. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.03.085 · Cited by 319
Functionalization, compatibilization and properties of polypropylene composites with Hemp fibres
Pracellà, M., Chionna, D., Anguillesi, I., Kulinski, Z., & Piórkowska, E. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.12.006 · Cited by 317
Mohanty, A. K., Wibowo, A., Misra, M., & Drzal, L. T. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.015 · Cited by 317
Habibi, Y., El‐Zawawy, W. K., Ibrahim, M. M., & Dufresne, A. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.008 · Cited by 314
Rana, A. K., Mandal, A., & Bandyopadhyay, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00267-1 · Cited by 314
Bledzki, A. K., Mamun, A. A., & Volk, J. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.01.022 · Cited by 312
Self-citationBrahim, S. B., & Cheikh, R. B. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.10.006 · Cited by 310
Influence of moisture absorption on the interfacial strength of bamboo/vinyl ester composites
Chen, H., Miao, M., & Ding, X. B. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.09.003 · Cited by 308
Starch composites reinforced by bamboo cellulosic crystals
Liu, D., Zhong, T., Chang, P. R., Li, K., & Wu, Q. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2009.11.058 · Cited by 301
The effect of acetylation on interfacial shear strength between plant fibres and various matrices
Khalil, H. P. S. A., Ismail, H., Rozman, H. D., & Ahmad, M. N. (2001) · European Polymer Journal · doi:10.1016/s0014-3057(00)00199-3 · Cited by 299
Surface silylation of cellulose microfibrils: preparation and rheological properties
Goussé, C., Chanzy, H., Cerrada, M. L., & Fleury, E. (2004) · Polymer · doi:10.1016/j.polymer.2003.12.028 · Cited by 292
Environmental Durability of Flax Fibres and their Composites based on Polypropylene Matrix
Stamboulis, A., Baillie, C. A., Garkhail, S. K., van Melick, H. G. H., & Peijs, T. (2000) · Applied Composite Materials · doi:10.1023/a:1026581922221 · Cited by 291
Cracking mechanisms in durable sisal fiber reinforced cement composites
Silva, F. D. A., Mobasher, B., & Filho, R. D. T. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.07.004 · Cited by 285
Panthapulakkal, S., Zereshkian, A., & Sain, M. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.02.043 · Cited by 284
Self-citationManufacturing sisal–polypropylene composites with minimum fibre degradation
Jayaraman, K. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00217-8 · Cited by 283
Park, J., Quang, S. T., Hwang, B.-S., & DeVries, K. L. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.03.014 · Cited by 282
Thermal degradation of cellulose derivatives/starch blends and sisal fibre biocomposites
Alvarez, V. A., & Vázquez, A. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.09.003 · Cited by 276
Effect of chemical treatments on water sorption and mechanical properties of flax fibres
Alix, S., Philippe, E., Bessadok, A., Lebrun, L., Morvan, C., & Marais, S. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.04.067 · Cited by 275
Study of the interfacial properties of natural fibre reinforced polyethylene
Torres, F. G., & Cubillas, M. L. (2005) · Polymer Testing · doi:10.1016/j.polymertesting.2005.05.004 · Cited by 275
Sreekumar, P. A., Joseph, K., Unnikrishnan, G., & Thomas, S. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.08.025 · Cited by 273
Seawater ageing of flax/poly(lactic acid) biocomposites
Le Duigou, A., Davies, P., & Baley, C. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.03.025 · Cited by 271
Gassan, J. (2002) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00116-6 · Cited by 271
Thermogravimetric analysis of rice husk flour filled thermoplastic polymer composites
Kim, H.-S., Yang, H.-S., Kim, H.-J., & Park, H.-J. (2004) · Journal of Thermal Analysis and Calorimetry · doi:10.1023/b:jtan.0000028020.02657.9b · Cited by 269
Okubo, K., Fujii, T., & Thostenson, E. T. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.012 · Cited by 267
Hill, C. A. S., & Abdul Khalil, H. P. S. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20001128)78:9<1685::aid-app150>3.0.co;2-u · Cited by 263
Modified polyester resins for natural fibre composites
AZIZ, S., ANSELL, M., CLARKE, S., & PANTENY, S. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.08.005 · Cited by 258
Pothan, L. A., Thomas, S., & Groeninckx, G. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.09.001 · Cited by 257
On the mechanical properties, deformation and fracture of a natural fibre/recycled polymer composite
Singleton, A. C. N., Baillie, C. A., Beaumont, P. W. R., & Peijs, T. (2003) · Composites Part B Engineering · doi:10.1016/s1359-8368(03)00042-8 · Cited by 256
Starch-based nanocomposites reinforced with flax cellulose nanocrystals
Cao, X., Chen, Y., Chang, P. R., Muir, A. D., & Falk, G. (2008) · Express Polymer Letters · doi:10.3144/expresspolymlett.2008.60 · Cited by 256
Investigations on the recycling of hemp and sisal fibre reinforced polypropylene composites
Bourmaud, A., & Baley, C. (2007) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.02.018 · Cited by 255
Abaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites
Bledzki, A. K., Mamun, A. A., & Faruk, O. (2007) · Express Polymer Letters · doi:10.3144/expresspolymlett.2007.104 · Cited by 254
Self-citationBiodegradability of poly(butylene succinate) (PBS) composite reinforced with jute fibre
Liu, L., Yu, J., Cheng, L., & Yang, X. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.10.013 · Cited by 251
Moisture absorption studies of sisal fibre reinforced polypropylene composites
CHOW, C., Xing, X., & Li, R. K. Y. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.08.005 · Cited by 251
Bledzki, A. K., Faruk, O., & Sperber, V. E. (2006) · Macromolecular Materials and Engineering · doi:10.1002/mame.200600113 · Cited by 251
Self-citationHoareau, W., Trindade, W. G., Siegmund, B., Castellan, A., & Frollini, E. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.07.005 · Cited by 250
Bilba, K., Arsene, M.-A., & Ouensanga, A. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(02)00003-3 · Cited by 249
Rice straw fiber-reinforced high-density polyethylene composite: Effect of fiber type and loading
Yao, F., Wu, Q., Lei, Y., & Xu, Y. (2008) · Industrial Crops and Products · doi:10.1016/j.indcrop.2008.01.007 · Cited by 247
Compounding and mechanical properties of biodegradable hemp fibre composites
Keller, A. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00102-7 · Cited by 245
Singh, S., Mohanty, A. K., Sugie, T., Takai, Y., & Hamada, H. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.01.004 · Cited by 244
Resin transfer molding of natural fiber reinforced composites: cure simulation
Rouison, D., Sain, M. M., & Couturier, M. F. (2003) · Composites Science and Technology · doi:10.1016/j.compscitech.2003.06.001 · Cited by 244
Self-citationIdicula, M., Neelakantan, N. R., Oommen, Z., Joseph, K., & Thomas, S. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21636 · Cited by 242
Lopattananon, N., Panawarangkul, K., Sahakaro, K., & Ellis, B. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24584 · Cited by 242
High Quality Flax Fibre Composites Manufactured by the Resin Transfer Moulding Process
Oksman, K. (2001) · Journal of Reinforced Plastics and Composites · doi:10.1177/073168401772678634 · Cited by 241
Effect of recycling on mechanical behaviour of biocompostable flax/poly(l-lactide) composites
Le Duigou, A., Pillin, I., Bourmaud, A., Davies, P., & Baley, C. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.05.008 · Cited by 238
Isolation, preparation and characterization of cellulose microfibers obtained from bagasse
Bhattacharya, D., Germinario, L. T., & Winter, W. T. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.12.005 · Cited by 237
Lee, B.-H., Kim, H.-S., Lee, S., Kim, H.-J., & Dorgan, J. R. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.07.015 · Cited by 237
Water sorption in oil palm fiber reinforced phenol formaldehyde composites
Sreekala, M. S., Kumaran, M. G., & Thomas, S. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00032-5 · Cited by 231
Fracture and fatigue of natural fiber-reinforced cementitious composites
Savastano, H., Santos, S. F., Radonjic, M., & Soboyejo, W. O. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.02.006 · Cited by 230
Huda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2007) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2006.06.010 · Cited by 229
Cellulose microfibrils from banana farming residues: isolation and characterization
Zuluaga, R., Putaux, J.-L., Restrepo, A., Mondragon, I., & Gañán, P. (2007) · Cellulose · doi:10.1007/s10570-007-9118-z · Cited by 228
NAYAK, S. K., Mohanty, S., & Samal, S. K. (2009) · Materials Science and Engineering A · doi:10.1016/j.msea.2009.06.020 · Cited by 228
Fully biodegradable natural fiber composites from renewable resources: All-plant fiber composites
ZHANG, M., RONG, M., & LU, X. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.06.018 · Cited by 227
Biodegradable composites based on flax/polyhydroxybutyrate and its copolymer with hydroxyvalerate
Barkoula, N. M., Garkhail, S. K., & Peijs, T. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2009.08.005 · Cited by 225
Mechanical performance of coir fiber/polyester composites
Monteiro, S. N., Terrones, L. A. H., & D’Almeida, J. R. M. (2008) · Polymer Testing · doi:10.1016/j.polymertesting.2008.03.003 · Cited by 222
Oksman, K., Mathew, A. P., Långström, R., Nyström, B., & Joseph, K. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.03.020 · Cited by 222
Effect of MAPP as a Coupling Agent on the Performance of Jute–PP Composites
Mohanty, S., NAYAK, S. K., Verma, S. K., & Tripathy, S. S. (2004) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684404032868 · Cited by 222
Placet, V. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.031 · Cited by 221
Huda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2008) · Composite Interfaces · doi:10.1163/156855408783810920 · Cited by 220
Rahman, M. R., Huque, M. M., Islam, M. N., & Hasan, M. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.08.002 · Cited by 219
Creep and dynamic mechanical behavior of PP–jute composites: Effect of the interfacial adhesion
Acha, B. A., Reboredo, M. M., & Marcovich, N. E. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.01.003 · Cited by 212
Mishra, S., Naik, J., & Patil, Y. P. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00056-7 · Cited by 211
Sinha, E., & Panigrahi, S. (2009) · Journal of Composite Materials · doi:10.1177/0021998309338078 · Cited by 211
The fracture behaviour and toughness of woven flax fibre reinforced epoxy composites
Liu, Q., & Hughes, M. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.07.008 · Cited by 209
Silane treatment of bagasse fiber for reinforcement of cementitious composites
Bilba, K., & Arsène, M.-A. (2008) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.05.013 · Cited by 209
Huang, X., & Netravali, A. N. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.01.007 · Cited by 209
Panthapulakkal, S., & Sain, M. M. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.01.015 · Cited by 209
Self-citationLiu, W., Drzal, L. T., Mohanty, A. K., & Misra, M. (2007) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2006.05.003 · Cited by 209
Marais, S., Gouanvé, F., Bonnesoeur, A., Grenet, J., Poncin‐Epaillard, F., Morvan, C., & Métayer, M. L. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.11.008 · Cited by 208
Dispersion of soybean stock‐based nanofiber in a plastic matrix
Wang, B., & Sain, M. (2007) · Polymer International · doi:10.1002/pi.2167 · Cited by 208
Self-citationChemical modification of flax reinforced polypropylene composites
John, M. J., & Anandjiwala, R. D. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.007 · Cited by 208
Ragoubi, M., Bienaimé, D., Molina, S., George, B., & Merlin, A. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2009.12.004 · Cited by 206
Huang, X., & Netravali, A. N. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.01.014 · Cited by 205
Thermoplastic pultrusion of natural fibre reinforced composites
de Velde, K. V., & Kiekens, P. (2001) · Composite Structures · doi:10.1016/s0263-8223(01)00110-6 · Cited by 204
Pasquini, D., Teixeira, E. D. M., Curvelo, A. A. D. S., Belgacem, M. N., & Dufresne, A. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.06.022 · Cited by 203
Unidirectional hemp and flax EP‐ and PP‐composites: Influence of defined fiber treatments
Bledzki, A. K., Fink, H. ‐., & Specht, K. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20712 · Cited by 202
Self-citationSugarcane bagasse cellulose/HDPE composites obtained by extrusion
Mulinari, D. R., Voorwald, H. J. C., Cioffi, M. O. H., DASILVA, M., DACRUZ, T., & Saron, C. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.10.006 · Cited by 201
Polypropylene composites with enzyme modified abaca fibre
Bledzki, A. K., Mamun, A. A., Jaszkiewicz, A., & Erdmann, K. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.02.003 · Cited by 198
Self-citationLuz, S. M., Del Tio, J., Rocha, G. J. M., Gonçalves, A. R., & Del’Arco, A. P. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.04.014 · Cited by 198
Processing of natural-fibre reinforced polymers and the resulting dynamic–mechanical properties
Wielage, B., Lampke, T., Utschick, H., & Soergel, F. (2003) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(03)00195-x · Cited by 198
Bakare, I. O., Okieimen, F. E., Pavithran, C., Abdul Khalil, H. P. S., & Brahmakumar, M. (2010) · Materials & Design · doi:10.1016/j.matdes.2010.04.013 · Cited by 196
Pothan, L. A., & Thomas, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00092-7 · Cited by 194
Physico-mechanical properties of chemically treated coir reinforced polypropylene composites
Islam, M. N., Rahman, M. R., Haque, M. M., & Huque, M. M. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.10.006 · Cited by 193
Degradation of polycaprolactone/starch blends and composites with sisal fibre
di Franco, C. R., Cyras, V. P., Busalmen, J. P., Ruseckaite, R. A., & Vázquez, A. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.02.009 · Cited by 192
A review on oil palm empty fruit bunch fiber‐reinforced polymer composite materials
Hassan, A., Salema, A. A., Ani, F. N., & Bakar, A. A. (2010) · Polymer Composites · doi:10.1002/pc.21006 · Cited by 191
Mishra, S., Misra, M., Tripathy, S. S., NAYAK, S. K., & Mohanty, A. K. (2001) · Journal of Reinforced Plastics and Composites · doi:10.1106/qwr6-32vv-k720-596d · Cited by 190
Zafeiropoulos, N. E., Baillie, C. A., & Matthews, F. L. (2001) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(00)00058-0 · Cited by 189
Banana fibers and microfibrils as lignocellulosic reinforcements in polymer composites
Ibrahim, M. M., Dufresne, A., El-Zawawy, W. K., & Agblevor, F. A. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.03.057 · Cited by 188
Biodegradation of aliphatic polyester composites reinforced by abaca fiber
Teramoto, N., Urata, K., Ozawa, K., & Shibata, M. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.04.026 · Cited by 185
Calculation of elastic properties of natural fibers
Gassan, J., Chate, A., & Bledzki, A. K. (2001) · Journal of Materials Science · doi:10.1023/a:1017969615925 · Cited by 185
Self-citationPlant Fibers as Reinforcement for Green Composites
Bismarck, A., Mishra, S., & Lampke, T. (2005) · doi:10.1201/9780203508206-10 · Cited by 185
Khondker, O. A., Ishiaku, U. S., Nakai, A., & Hamada, H. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.12.030 · Cited by 183
Mechanical Properties of Natural Fibre Mat Reinforced Thermoplastic
Oksman, K. (2000) · Applied Composite Materials · doi:10.1023/a:1026546426764 · Cited by 182
Hemp fibre reinforced cashew nut shell liquid composites
Mwaikambo, L. Y., & Ansell, M. P. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00101-5 · Cited by 178
Rouison, D., Sain, M. M., & Couturier, M. F. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.07.040 · Cited by 177
Self-citationOchi, S. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.12.019 · Cited by 175
Jute fibre/polypropylene composites II. Thermal, hydrothermal and dynamic mechanical behaviour
Doan, T.-T.-L., Brodowsky, H., & Mäder, E. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.02.011 · Cited by 175
Pasquini, D., Teixeira, E. D. M., Curvelo, A. A. D. S., Belgacem, M. N., & Dufresne, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.05.009 · Cited by 174
Luz, S. M., Gonçalves, A. R., & Del’Arco, A. P. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.01.014 · Cited by 173
Effect of water absorption fatigue on mechanical properties of sisal textile-reinforced composites
KIM, H., & Seo, D. (2006) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2006.02.018 · Cited by 173
Lodha, P., & Netravali, A. N. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.12.036 · Cited by 172
Analysis of the tensile strength of polyester/hybrid ramie–cotton fabric composites
Paiva Júnior, C. Z., de Carvalho, L. H., Fonseca, V. M., Monteiro, S. N., & d’Almeida, J. R. M. (2004) · Polymer Testing · doi:10.1016/s0142-9418(03)00071-0 · Cited by 169
Suppakarn, N., & Jarukumjorn, K. (2009) · Composites Part B Engineering · doi:10.1016/j.compositesb.2009.04.005 · Cited by 169
Li, X., Tabil, L. G., Oguocha, I. N. A., et al. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.02.016 · Cited by 168
Impact and fatigue behaviour of hemp fibre composites
Yuanjian, T., & Isaac, D. H. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.03.039 · Cited by 167
Guimarães, J. L., Wypych, F., Saul, C. K., Ramos, L. P., & Satyanarayana, K. G. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.11.002 · Cited by 167
Microfibrillated cellulose from the peel of prickly pear fruits
Habibi, Y., Mahrouz, M., & Vignon, M. R. (2008) · Food Chemistry · doi:10.1016/j.foodchem.2008.12.034 · Cited by 165
Wu, C.-S. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.04.002 · Cited by 165
Cited by
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657
Progress in Green Polymer Composites from Lignin for Multifunctional Applications: A Review
Thakur, V. K., Thakur, M. K., Raghavan, P., & Kessler, M. R. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500087z · Cited by 1,398
Gurunathan, T., Mohanty, S., & Nayak, S. K. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.06.007 · Cited by 1,362
A review on modification methods to cellulose-based adsorbents to improve adsorption capacity
Hokkanen, S., Bhatnagar, A., & Sillanpää, M. (2016) · Water Research · doi:10.1016/j.watres.2016.01.008 · Cited by 1,081
Gholampour, A., & Ozbakkaloglu, T. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-03990-y · Cited by 1,058
Metadata
- Authors
- Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M.
- Venue
- Progress in Polymer Science
- Publisher
- Elsevier BV
- Published
- 2012-11
- Volume
- 37
- Issue
- 11
- Pages
- 1552-1596
- ISSN
- 0079-6700 (ISSN-L)
- OpenAlex
- W2059474375
- Cited by
- 4,262
- References
- 301
- FWCI
- 150.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.