The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Advances in 3D printing of thermoplastic polymer composites and nanocomposites
Open accessAbstract
Abstract Commodity thermoplastics and thermoplastic composites are staples in Additive Manufacturing (AM). Their use is widespread and accounts for the largest volume of 3D printed materials. Accessible property ranges of current material formulations are limited, and thus there is high interest in extending AM to high-performance engineering polymers and nanocomposites that have yet to gain wide commercial acceptance in AM. Current applications of high-performance thermoplastic polymers are limited to adaptations from conventional plastics processing such as injection molding, thermoforming, extrusion, and others. Thermoplastic composites can be categorized into particle-, fiber-, and nanomaterial-based composites as well as polymer blends. The importance of these different composite systems to AM is discussed in this review. Also reviewed are trends in instrument development such as in-nozzle impregnation, dual print heads, and higher temperature FDM that improve printing of thermoplastic composites. An overview of newer types of AM techniques allowing higher filler loading for thermoplastic composites like liquid deposition modeling (LDM) sometimes known as direct ink writing (DIW) are discussed. Finally, a perspective is given on the important parameters and standards needed to make AM printed objects from polymer composites more effective in cost/performance ratio.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
Self-citationThree-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Yang, C., Wang, Q., & Li, D. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.032 · Cited by 1,162
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
Dickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.06.004 · Cited by 792
Ferreira, R. T. L., Amatte, I. C., Dutra, T. A., & Bürger, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.05.013 · Cited by 764
Gnanasekaran, K., Heijmans, T., van Bennekom, S., Woldhuis, H., Wijnia, S., de With, G., & Friedrich, H. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.04.003 · Cited by 594
Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation
Patil, H., Tiwari, R. V., & Repka, M. A. (2016) · AAPS PharmSciTech · doi:10.1208/s12249-015-0360-7 · Cited by 584
Light-weighting in aerospace component and system design
Zhu, L., Li, N., & Childs, P. R. N. (2018) · Propulsion and Power Research · doi:10.1016/j.jppr.2018.04.001 · Cited by 583
3D Printing of Polymer Nanocomposites via Stereolithography
Manapat, J. Z., Chen, Q., Ye, P., & Advincula, R. C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600553 · Cited by 565
Self-citationMechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
Masood, S. H., & Song, W. Q. (2004) · Materials & Design · doi:10.1016/j.matdes.2004.02.009 · Cited by 543
3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics
Minas, C., Carnelli, D., Tervoort, E., & Studart, A. R. (2016) · Advanced Materials · doi:10.1002/adma.201603390 · Cited by 507
Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
Nikzad, M., Masood, S. H., & Sbarski, I. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.01.056 · Cited by 503
Fused deposition modelling with ABS–graphene nanocomposites
Dul, S., Fambri, L., & Pegoretti, A. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.03.013 · Cited by 491
Material properties and fabrication parameters in selective laser sintering process
Gibson, I., & Shi, D. (1997) · Rapid Prototyping Journal · doi:10.1108/13552549710191836 · Cited by 488
Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling
Kalita, S. J., Bose, S., Hosick, H. L., & Bandyopadhyay, A. (2003) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(03)00052-3 · Cited by 488
High performance polymer nanocomposites for additive manufacturing applications
de Leon, A. C., Chen, Q., Palaganas, N. B., Palaganas, J. O., Manapat, J., & Advincula, R. C. (2016) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2016.04.010 · Cited by 467
Self-citationChen, Q., Mangadlao, J. D., Wallat, J., De Leon, A., Pokorski, J. K., & Advincula, R. C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11793 · Cited by 415
Self-citationTorrado, A. R., Shemelya, C. M., English, J. D., Lin, Y., Wicker, R. B., & Roberson, D. A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.02.001 · Cited by 406
Selective Laser Melting: A manufacturing technology for the future?
Bremen, S., Meiners, W., & Diatlov, A. (2012) · Laser Technik Journal · doi:10.1002/latj.201290018 · Cited by 402
Postiglione, G., Natale, G., Griffini, G., Levi, M., & Turri, S. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.05.014 · Cited by 399
3D-printing and advanced manufacturing for electronics
Espera, A. H., Dizon, J. R. C., Chen, Q., & Advincula, R. C. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00077-7 · Cited by 356
Self-citationElectrically conductive filament for 3D-printed circuits and sensors
Kwok, S. W., Goh, K. H. H., Tan, Z. D., Tan, S. T. M., Tjiu, W. W., Soh, J. Y., Ng, Z. J. G., Chan, Y. Z., Hui, H. K., & Goh, K. E. J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.07.001 · Cited by 332
Frketic, J., Dickens, T., & Ramakrishnan, S. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.01.003 · Cited by 322
Three‐Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness
Duoss, E. B., Weisgraber, T. H., Hearon, K., Zhu, C., Small, W., Metz, T. R., Vericella, J. J., Barth, H. D., Kuntz, J. D., Maxwell, R. S., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400451 · Cited by 316
Palaganas, N. B., Mangadlao, J. D., de Leon, A. C. C., Palaganas, J. O., Pangilinan, K. D., Lee, Y. J., & Advincula, R. C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09223 · Cited by 279
Self-citationKim, G. D., & Oh, Y. T. (2008) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem724 · Cited by 238
Yan, C., Hao, L., Xu, L., & Shi, Y. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.08.013 · Cited by 236
Metallic Architectures from 3D‐Printed Powder‐Based Liquid Inks
Jakus, A. E., Taylor, S. L., Geisendorfer, N. R., Dunand, D. C., & Shah, R. N. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503921 · Cited by 209
3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam
Chen, Q., Zhao, J., Ren, J., Rong, L., Cao, P., & Advincula, R. C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900469 · Cited by 201
Self-citationMechanically Robust, Ultraelastic Hierarchical Foam with Tunable Properties via 3D Printing
Chen, Q., Cao, P., & Advincula, R. C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800631 · Cited by 197
Self-citationAn Overview of 3-D Printing in Manufacturing, Aerospace, and Automotive Industries
Lim, C. W. J., Le, K. Q., Lu, Q., & Wong, C. H. (2016) · IEEE Potentials · doi:10.1109/mpot.2016.2540098 · Cited by 184
Jia, Y., He, H., Geng, Y., Huang, B., & Peng, X. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.03.035 · Cited by 160
Yan, Y., Li, S., Zhang, R., Lin, F., Wu, R., Lu, Q., Xiong, Z., & Wang, X. (2009) · Tsinghua Science & Technology · doi:10.1016/s1007-0214(09)70059-8 · Cited by 156
Dispersing Nanoparticles in a Polymer Film via Solvent Evaporation
Cheng, S., & Grest, G. S. (2016) · ACS Macro Letters · doi:10.1021/acsmacrolett.6b00263 · Cited by 142
Combining additive manufacturing and catalysis: a review
Hurt, C., Brandt, M., Samudrala, S. P., Bhatelia, T., Patel, J., Selvakannan, P., & Bhargava, S. K. (2017) · Catalysis Science & Technology · doi:10.1039/c7cy00615b · Cited by 124
Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing
Wei, P., Leng, H., Chen, Q., Advíncula, R. C., & Pentzer, E. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00118 · Cited by 124
Self-citationBai, J., Goodridge, R., Hague, R., et al. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.03.012 · Cited by 106
3D Printing of Highly Conductive Nanocomposites for the Functional Optimization of Liquid Sensors
Chizari, K., Daoud, M. A., Ravindran, A. R., & Therriault, D. (2016) · Small · doi:10.1002/smll.201601695 · Cited by 104
Schmidt, J., Sachs, M., Blümel, C., Winzer, B., Toni, F., Wirth, K., & Peukert, W. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.04.003 · Cited by 100
Guo, Y., Chang, C., Halada, G. P., Cuiffo, M., Xue, Y., Zuo, X., Pack, S., Zhang, L., He, S., Weil, E. D., et al. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.01.019 · Cited by 98
A Nanosilica/Nylon-12 Composite Powder for Selective Laser Sintering
Chunze, Y., Yusheng, S., Jinsong, Y., et al. (2008) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684408094062 · Cited by 91
Zhuang, Y., Song, W., Ning, G., Sun, X., Sun, Z., Xu, G., Zhang, B., Chen, Y., & Tao, S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.047 · Cited by 89
Zaldivar, R. J., McLouth, T. D., Ferrelli, G. L., Patel, D., Hopkins, A. R., & Witkin, D. B. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.022 · Cited by 74
Dizon, J. R. C., Chen, Q., Valino, A. D., et al. (2018) · MRS Communications · doi:10.1557/mrc.2018.188 · Cited by 65
Self-citationCarbon Nanotubes and Graphene as Additives in 3D Printing
Acquah, S. F. A., Leonhardt, B. E., Nowotarski, M. S., Magi, J. M., Chambliss, K. A., Venzel, T. E. S., Delekar, S. D., & Al-Hariri, L. A. (2016) · InTech eBooks · doi:10.5772/63419 · Cited by 59
Synthesis of PA12/functionalized GNP nanocomposite powders for the selective laser sintering process
Kim, H. C., Hahn, H. T., & Yang, Y. S. (2012) · Journal of Composite Materials · doi:10.1177/0021998312441812 · Cited by 58
Simulation of Selective Electron Beam Melting Processes
Attar, E. (2011) · OPUS FAU (Kooperativer Bibliotheksverbund Berlin-Brandenburg (KOBV), on behalf of the Universitätsbibliothek Erlangen-Nürnberg) · Cited by 53
Ahmad, M., Wahit, M. U., Kadir, M. R. A., Dahlan, K. Z. M., & Jawaid, M. (2013) · Journal of Polymer Engineering · doi:10.1515/polyeng-2012-0142 · Cited by 44
UV‐assisted three‐dimensional printing of polymer nanocomposites based on inorganic fillers
Postiglione, G., Natale, G., Griffini, G., Levi, M., & Turri, S. (2015) · Polymer Composites · doi:10.1002/pc.23735 · Cited by 37
Yang, J., Chen, Q., Chen, F., Zhang, Q., Wang, K., & Fu, Q. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/35/355707 · Cited by 35
Self-citationPolymer Powder Production for Laser Melting Through Immiscible Blends
Drummer, D., Medina-Hernández, M., Drexler, M., & Wudy, K. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.01.332 · Cited by 32
Wudy, K., & Drummer, D. (2018) · JOM · doi:10.1007/s11837-018-3226-0 · Cited by 25
Applications of thermoplastic-based blends
Ching, Y. C., Chuah, C. H., Ching, K. Y., Abdullah, L. C., & Rahman, A. N. M. M. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100408-1.00005-4 · Cited by 12
Cited by
Polymer composite materials: A comprehensive review
Hsissou, R., Seghiri, R., Benzekri, Z., Hilali, M., Rafik, M., & Elharfi, A. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.113640 · Cited by 1,136
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Extrusion-Based 3D Printing Applications of PLA Composites: A Review
Tümer, E. H., & Erbil, H. Y. (2021) · Coatings · doi:10.3390/coatings11040390 · Cited by 454
Metadata
- Authors
- Valino, A. D., Dizon, J. R. C., Espera, A. H., Chen, Q., Messman, J., & Advincula, R. C.
- Venue
- Progress in Polymer Science
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 98
- Pages
- 101162
- ISSN
- 0079-6700 (ISSN-L)
- OpenAlex
- W2974825919
- Cited by
- 565
- References
- 60
- FWCI
- 26.33
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.