The DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.
Assessing challenges for implementing Industry 4.0: Implications for process safety and environmental protection
Abstract
Abstract Researchers and practitioners are giving significant attention to Industry 4.0 due to its numerous benefits to manufacturing organizations. Several aspects of Industry 4.0 have been studied in the literature. However, studies on the challenges for implementing Industry 4.0 in manufacturing operations have received less attention. To address this gap, this study identifies a set of challenges (framework) for implementing Industry 4.0 in manufacturing industries. This framework is evaluated in the leather industry of Bangladesh aided by a novel multi-criteria decision-making method named Best-Worst method (BWM). The findings of the study showed that ‘lack of technological infrastructure’ is the most pressing challenge that may hurdle the implementation of Industry 4.0 whereas ‘environmental side-effects’ is the less among the challenges that may hinder implementation of Industry 4.0 in the Bangladeshi leather industry. This result may help decision makers, industrial managers and practitioners in the Bangladeshi leather industry to realize the actual challenges confronting them when attempting to implement Industry 4.0 and focus their attention on how to address these challenges to pave ways for a successful implementation of Industry 4.0.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Internet of Things (IoT): A vision, architectural elements, and future directions
Gubbi, J., Buyya, R., Marusic, S., & Palaniswami, M. (2013) · Future Generation Computer Systems · doi:10.1016/j.future.2013.01.010 · Cited by 12,293
A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems
Lee, J., Bagheri, B., & Kao, H.-A. (2015) · Manufacturing Letters · doi:10.1016/j.mfglet.2014.12.001 · Cited by 5,113
Best-worst multi-criteria decision-making method
Rezaei, J. (2015) · Omega · doi:10.1016/j.omega.2014.11.009 · Cited by 4,333
Lasi, H., Fettke, P., Kemper, H.-G., Feld, T., & Hoffmann, M. (2014) · Business & Information Systems Engineering · doi:10.1007/s12599-014-0334-4 · Cited by 4,276
Industry 4.0: A survey on technologies, applications and open research issues
Lu, Y. (2017) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2017.04.005 · Cited by 3,012
Intelligent Manufacturing in the Context of Industry 4.0: A Review
Zhong, R. Y., Xu, X., Klotz, E., & Newman, S. T. (2017) · Engineering · doi:10.1016/j.eng.2017.05.015 · Cited by 2,913
The Internet of Things (IoT): Applications, investments, and challenges for enterprises
Lee, I., & Lee, K. (2015) · Business Horizons · doi:10.1016/j.bushor.2015.03.008 · Cited by 2,803
Service Innovation and Smart Analytics for Industry 4.0 and Big Data Environment
Lee, J., Kao, H.-A., & Yang, S. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.02.001 · Cited by 1,965
Opportunities of Sustainable Manufacturing in Industry 4.0
Stock, T., & Seliger, G. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.01.129 · Cited by 1,893
Industry 4.0 and the current status as well as future prospects on logistics
Hofmann, E., & Rüsch, M. (2017) · Computers in Industry · doi:10.1016/j.compind.2017.04.002 · Cited by 1,841
A Maturity Model for Assessing Industry 4.0 Readiness and Maturity of Manufacturing Enterprises
Schumacher, A., Erol, S., & Sihn, W. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.07.040 · Cited by 1,766
Best-worst multi-criteria decision-making method: Some properties and a linear model
Rezaei, J. (2016) · Omega · doi:10.1016/j.omega.2015.12.001 · Cited by 1,720
Wang, S., Wan, J., Zhang, D., Li, D., & Zhang, C. (2016) · Computer Networks · doi:10.1016/j.comnet.2015.12.017 · Cited by 1,404
Brettel, M., Friederichsen, N., Keller, M., & Rosenberg, M. (2014) · RWTH Publications (RWTH Aachen) · doi:10.5281/zenodo.1336426 · Cited by 1,362
Vaidya, S., Ambad, P., & Bhosle, S. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.02.034 · Cited by 1,352
Industry 4.0: Towards future industrial opportunities and challenges
Zhou, K., Liu, T., & Zhou, L. (2015) · 2015 12th International Conference on Fuzzy Systems and Knowledge Discovery (FSKD) · doi:10.1109/fskd.2015.7382284 · Cited by 1,221
A Vision of IoT: Applications, Challenges, and Opportunities With China Perspective
Chen, S., Xu, H., Liu, D., Hu, B., & Wang, H. (2014) · IEEE Internet of Things Journal · doi:10.1109/jiot.2014.2337336 · Cited by 1,210
Cyber–Physical System Security for the Electric Power Grid
Sridhar, S., Hahn, A., & Govindarasu, M. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2011.2165269 · Cited by 1,208
de Sousa Jabbour, A. B. L., Jabbour, C. J. C., Foropon, C., & Godinho Filho, M. (2018) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2018.01.017 · Cited by 1,043
A Categorical Framework of Manufacturing for Industry 4.0 and Beyond
Qin, J., Liu, Y., & Grosvenor, R. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.08.005 · Cited by 1,042
The Role of Additive Manufacturing in the Era of Industry 4.0
Dilberoglu, U. M., Gharehpapagh, B., Yaman, U., & Dolen, M. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.148 · Cited by 1,000
Holistic Approach for Human Resource Management in Industry 4.0
Hecklau, F., Galeitzke, M., Flachs, S., & Kohl, H. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.05.102 · Cited by 951
Sanders, A., Elangeswaran, C., & Wulfsberg, J. (2016) · Journal of Industrial Engineering and Management · doi:10.3926/jiem.1940 · Cited by 938
A Complex View of Industry 4.0
Roblek, V., Meško, M., & Krapež, A. (2016) · Sage Open · doi:10.1177/2158244016653987 · Cited by 926
Fuzzy best-worst multi-criteria decision-making method and its applications
Guo, S., & Zhao, H. (2017) · Knowledge-Based Systems · doi:10.1016/j.knosys.2017.01.010 · Cited by 923
Cyber physical systems in the context of Industry 4.0
Jazdi, N. (2014) · 2014 IEEE International Conference on Automation, Quality and Testing, Robotics · doi:10.1109/aqtr.2014.6857843 · Cited by 841
Singh, S., & Singh, N. (2012) · 2012 International Conference on Communication, Information & Computing Technology (ICCICT) · doi:10.1109/iccict.2012.6398180 · Cited by 753
(2000) · Journal of Management Information Systems · doi:10.1080/07421222.2000.11045632 · Cited by 744
Weyer, S., Schmitt, M., Ohmer, M., & Gorecky, D. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.143 · Cited by 704
Lean Automation enabled by Industry 4.0 Technologies
Kolberg, D., & Zühlke, D. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.359 · Cited by 699
INDUSTRY 4.0: A REVIEW ON INDUSTRIAL AUTOMATION AND ROBOTIC
Kamarul Bahrin, M. A., Othman, M. F., Nor Azli, N. H., & Talib, M. F. (2016) · Jurnal Teknologi · doi:10.11113/jt.v78.9285 · Cited by 679
Requirements for Education and Qualification of People in Industry 4.0
Benešová, A., & Tupa, J. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.366 · Cited by 650
Tangible Industry 4.0: A Scenario-Based Approach to Learning for the Future of Production
Erol, S., Jäger, A., Hold, P., Ott, K., & Sihn, W. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.03.162 · Cited by 636
What does Industry 4.0 mean to Supply Chain?
Tjahjono, B., Esplugues, C., Ares, E., & Pelaez, G. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.09.191 · Cited by 594
Toxic hazards of leather industry and technologies to combat threat: a review
Dixit, S., Yadav, A., Dwivedi, P. D., & Das, M. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.10.017 · Cited by 588
Rezaei, J., Nispeling, T., Sarkis, J., & Tavasszy, L. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.125 · Cited by 577
Lofrano, G., Meriç, S., Zengin, G. E., & Orhon, D. (2013) · Science of The Total Environment · doi:10.1016/j.scitotenv.2013.05.004 · Cited by 565
Witkowski, K. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.03.197 · Cited by 563
Assessing the social sustainability of supply chains using Best Worst Method
Badri Ahmadi, H., Kusi-Sarpong, S., & Rezaei, J. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.07.020 · Cited by 548
Self-citationMoktadir, M. A., Rahman, T., Rahman, M. H., Ali, S. M., & Paul, S. K. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.063 · Cited by 512
Self-citationRisk analysis in green supply chain using fuzzy AHP approach: A case study
Mangla, S. K., Kumar, P., & Barua, M. K. (2015) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2015.01.001 · Cited by 471
A Review on Internet of Things (IoT)
U.Farooq, M., Waseem, M., Mazhar, S., Khairi, A., & Kamal, T. (2015) · International Journal of Computer Applications · doi:10.5120/19787-1571 · Cited by 453
Industry 4.0 Impacts on Lean Production Systems
Wagner, T., Herrmann, C., & Thiede, S. (2017) · Procedia CIRP · doi:10.1016/j.procir.2017.02.041 · Cited by 449
Prakash, C., & Barua, M. K. (2015) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2015.03.001 · Cited by 384
Industry 4.0 – An Introduction in the phenomenon
Zezulka, F., Marcon, P., Vesely, I., & Sajdl, O. (2016) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2016.12.002 · Cited by 369
Simulation in Manufacturing: Review and Challenges
Mourtzis, D., Doukas, M., & Bernidaki, D. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.10.032 · Cited by 356
Three stage maturity model in SME’s toward industry 4.0
Ganzarain, J., & Errasti, N. (2016) · Journal of Industrial Engineering and Management · doi:10.3926/jiem.2073 · Cited by 352
Ahuett-Garza, H., & Kurfess, T. (2018) · Manufacturing Letters · doi:10.1016/j.mfglet.2018.02.011 · Cited by 311
Industry 4.0 as a part of smart cities
Lom, M., Pribyl, O., & Svitek, M. (2016) · 2016 Smart Cities Symposium Prague (SCSP) · doi:10.1109/scsp.2016.7501015 · Cited by 307
Industry 4.0 and the New Simulation Modelling Paradigm
Rodič, B. (2017) · Organizacija · doi:10.1515/orga-2017-0017 · Cited by 302
Quality assessment of airline baggage handling systems using SERVQUAL and BWM
Rezaei, J., Kothadiya, O., Tavasszy, L., & Kroesen, M. (2018) · Tourism Management · doi:10.1016/j.tourman.2017.11.009 · Cited by 288
Industry 4.0 Learning Factory for regional SMEs
Faller, C., & Feldmüller, D. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.02.117 · Cited by 272
Big Data Analytics for Security
Cardenas, A. A., Manadhata, P. K., & Rajan, S. P. (2013) · IEEE Security & Privacy · doi:10.1109/msp.2013.138 · Cited by 272
Aspects of Risk Management Implementation for Industry 4.0
Tupa, J., Simota, J., & Steiner, F. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.248 · Cited by 268
Wan Ahmad, W. N. K., Rezaei, J., Sadaghiani, S., & Tavasszy, L. A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.03.166 · Cited by 249
The barriers to the progression of additive manufacture: Perspectives from UK industry
Thomas-Seale, L. E. J., Kirkman-Brown, J. C., Attallah, M. M., Espino, D. M., & Shepherd, D. E. T. (2018) · International Journal of Production Economics · doi:10.1016/j.ijpe.2018.02.003 · Cited by 235
An Industry 4.0 Research Agenda for Sustainable Business Models
Man, J. C. D., & Strandhagen, J. O. (2017) · Procedia CIRP · doi:10.1016/j.procir.2017.03.315 · Cited by 229
An enhanced risk assessment framework for business continuity management systems
Torabi, S. A., Giahi, R., & Sahebjamnia, N. (2016) · Safety Science · doi:10.1016/j.ssci.2016.06.015 · Cited by 224
Wireless requirements and challenges in Industry 4.0
Varghese, A., & Tandur, D. (2014) · 2014 International Conference on Contemporary Computing and Informatics (IC3I) · doi:10.1109/ic3i.2014.7019732 · Cited by 224
Leather waste—Potential threat to human health, and a new technology of its treatment
Kolomaznı́k, K., Adámek, M., Andel, I., & Uhlirova, M. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.03.070 · Cited by 213
Investigating the Effects of Smart Production Systems on Sustainability Elements
Waibel, M. W., Steenkamp, L. P., Moloko, N., & Oosthuizen, G. A. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.02.094 · Cited by 208
Network and information security challenges within Industry 4.0 paradigm
Pereira, T., Barreto, L., & Amaral, A. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.09.047 · Cited by 200
Big data challenges and opportunities in the hype of Industry 4.0
Khan, M., Wu, X., Xu, X., & Dou, W. (2017) · 2017 IEEE International Conference on Communications (ICC) · doi:10.1109/icc.2017.7996801 · Cited by 194
Assessing green supply chain practices in the Ghanaian mining industry: A framework and evaluation
Kusi-Sarpong, S., Sarkis, J., & Wang, X. (2016) · International Journal of Production Economics · doi:10.1016/j.ijpe.2016.04.002 · Cited by 192
Self-citationRecent Trends in Leather Making: Processes, Problems, and Pathways
Thanikaivelan, P., Rao, J. R., Nair, B. U., & Ramasami, T. (2005) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643380590521436 · Cited by 182
Developing a roadmap to overcome barriers to energy efficiency in buildings using best worst method
Gupta, P., Anand, S., & Gupta, H. (2017) · Sustainable Cities and Society · doi:10.1016/j.scs.2017.02.005 · Cited by 177
Promoting Work-based Learning through INDUSTRY 4.0
Schuh, G., Gartzen, T., Rodenhauser, T., & Marks, A. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.02.213 · Cited by 171
Opportunities Assessment of Product Development Process in Industry 4.0
dos Santos, K. C. P., Loures, E. D. F. R., Piechnicki, F., et al. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.265 · Cited by 157
Kusi‐Sarpong, S., Bai, C. A., Sarkis, J., & Wang, X. (2014) · Resources Policy · doi:10.1016/j.resourpol.2014.10.011 · Cited by 151
Self-citationGilchrist, A. (2016) · Industry 4.0 · doi:10.1007/978-1-4842-2047-4_13 · Cited by 147
An implementation path for green information technology systems in the Ghanaian mining industry
Bai, C. A., Kusi‐Sarpong, S., & Sarkis, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.151 · Cited by 145
Self-citationProcess Planning in Industry 4.0 Environment
Trstenjak, M., & Ćosić, P. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.303 · Cited by 139
Simulation-based sustainable manufacturing system design
Heilala, J., Vatanen, S., Tonteri, H., Montonen, J., Lind, S., Johansson, B., & Stahre, J. (2008) · Winter Simulation Conference · doi:10.1109/wsc.2008.4736284 · Cited by 134
Recouping the wastewater: a way forward for cleaner leather processing
Rao, J. R., Chandrababu, N. K., Muralidharan, C., Nair, B. U., Rao, P. G., & Ramasami, T. (2003) · Journal of Cleaner Production · doi:10.1016/s0959-6526(02)00095-1 · Cited by 131
Qu, Y., He, D., Yoon, J. M., Hecke, B. V., Bechhoefer, E. R., & Zhu, J. (2014) · Sensors · doi:10.3390/s140101372 · Cited by 125
Greening of industries in Bangladesh: pollution prevention practices
Hoque, A., & Clarke, A. C. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.09.008 · Cited by 107
Technological Infrastructure and the Implementation of Technological Strategies
Weiss, A. R., & Birnbaum, P. H. (1989) · Management Science · doi:10.1287/mnsc.35.8.1014 · Cited by 101
Application of best-worst method in evaluation of medical tourism development strategy
Abadi, F. A., Sahebi, I. G., Arab, A., Alavi, A., & Karachi, H. (2017) · Decision Science Letters · doi:10.5267/j.dsl.2017.4.002 · Cited by 94
Opportunities and challenges of the ecosystem approach
Richter, C. H., Xu, J., & Wilcox, B. A. (2014) · Futures · doi:10.1016/j.futures.2014.12.002 · Cited by 57
A Novel Multimode Fault Classification Method Based on Deep Learning
Zhou, F., Gao, Y., & Wen, C. (2017) · Journal of Control Science and Engineering · doi:10.1155/2017/3583610 · Cited by 55
Leary, M., Kron, T., Keller, C., Franich, R. D., Lonski, P., Subic, A., & Brandt, M. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.052 · Cited by 52
An intelligent simulation environment for manufacturing systems
Ruiz, N., Giret, A., Botti, V. J., et al. (2014) · Computers & Industrial Engineering · doi:10.1016/j.cie.2014.06.013 · Cited by 34
Cited by
Raj, A., Dwivedi, G., Sharma, A., Lopes de Sousa Jabbour, A. B., & Rajak, S. (2020) · International Journal of Production Economics · doi:10.1016/j.ijpe.2019.107546 · Cited by 1,042
Understanding the adoption of Industry 4.0 technologies in improving environmental sustainability
Javaid, M., Haleem, A., Singh, R. P., Suman, R., & Gonzalez, E. S. (2022) · Sustainable Operations and Computers · doi:10.1016/j.susoc.2022.01.008 · Cited by 859
Yadav, G., Luthra, S., Jakhar, S. K., Mangla, S. K., & Rai, D. P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120112 · Cited by 637
Substantial capabilities of robotics in enhancing industry 4.0 implementation
Javaid, M., Haleem, A., Singh, R. P., & Suman, R. (2021) · Cognitive Robotics · doi:10.1016/j.cogr.2021.06.001 · Cited by 563
Kumar, R., Singh, R. K., & Dwivedi, Y. K. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124063 · Cited by 535
Metadata
- Authors
- Moktadir, M. A., Ali, S. M., Kusi-Sarpong, S., & Shaikh, M. A. A.
- Venue
- Process Safety and Environmental Protection
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 117
- Pages
- 730-741
- ISSN
- 0263-8762 (ISSN-L)
- 0957-5820
- OpenAlex
- W2808388724
- Cited by
- 422
- References
- 82
- FWCI
- 33.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.