Influence of pyrolysis temperature and bio-waste composition on biochar characteristics
Open accessThe DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
The aim of this work was to analyse the influence of the pyrolysis temperature and feedstock composition on biochar yield and physicochemical properties. The raw materials to be pyrolyzed were characterized, and an experimental design was applied to carry out a statistical study. Three operating temperatures (673, 773 and 873 K) and two bio-wastes (nut and almond shells) were used. Several correlations linking the values of different physicochemical properties of the biochar with the two variables were proposed. On the basis of these correlations, it was found that almost all physicochemical characteristics of both almond and nut shell-based biochars depended on both the pyrolysis temperature and bio-waste composition, and an interaction of the two variables was observed in our experiments. Only the biochar yield did not exhibit an interaction between these two variables. The biochars presented H/C and O/C ratios and higher heating values similar to those of bituminous coal, confirming their potential as solid bio-fuels. They also presented high K and Ca contents. The obtained values for the aromaticity factor, stable C mass fraction and recalcitrance potential, indicated that the biochars could also be used for soil amendments, especially as acidic or basic compounds, according to their pH values.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biochar as a sorbent for contaminant management in soil and water: A review
Ahmad, M., Rajapaksha, A. U., Lim, J. E., Zhang, M., Bolan, N., Mohan, D., Vithanage, M., Lee, S. S., & Ok, Y. S. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2013.10.071 · Cited by 4,662
Beesley, L., Moreno-Jiménez, E., Gomez-Eyles, J. L., Harris, E., Robinson, B., & Sizmur, T. (2011) · Environmental Pollution · doi:10.1016/j.envpol.2011.07.023 · Cited by 1,610
Production and utilization of biochar: A review
Cha, J. S., Park, S. H., Jung, S.-C., Ryu, C., Jeon, J.-K., Shin, M.-C., & Park, Y.-K. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.06.002 · Cited by 1,293
Effects of temperature and particle size on bio-char yield from pyrolysis of agricultural residues
Demirbas, A. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.07.003 · Cited by 1,154
Effect of pyrolysis temperature, heating rate, and residence time on rapeseed stem derived biochar
Zhao, B., O'Connor, D., Zhang, J., Peng, T., Shen, Z., Tsang, D. C. W., & Hou, D. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.013 · Cited by 843
Kim, K. H., Kim, J.-Y., Cho, T.-S., & Choi, J. W. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.04.094 · Cited by 696
Biomass pyrolysis-a review of modelling, process parameters and catalytic studies
Sharma, A., Pareek, V., & Zhang, D. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.193 · Cited by 675
Comparison of biochar properties from biomass residues produced by slow pyrolysis at 500°C
Lee, Y., Park, J., Ryu, C., Gang, K. S., Yang, W., Park, Y.-K., Jung, J., & Hyun, S. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.135 · Cited by 624
Characteristics of biochar and its application in remediation of contaminated soil
Tang, J., Zhu, W., Kookana, R., & Katayama, A. (2013) · Journal of Bioscience and Bioengineering · doi:10.1016/j.jbiosc.2013.05.035 · Cited by 604
Liu, Z., Zhang, F.-S., & Wu, J. (2010) · Fuel · doi:10.1016/j.fuel.2009.08.042 · Cited by 545
Cited by
Production and beneficial impact of biochar for environmental application: A comprehensive review
Zhou, Y., Qin, S., Verma, S., Sar, T., Sarsaiya, S., Ravindran, B., Liu, T., Sindhu, R., Patel, A. K., Binod, P., et al. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.125451 · Cited by 351
Banana pseudo-stem biochar derived from slow and fast pyrolysis process
Abdullah, N., Mohd Taib, R., Mohamad Aziz, N. S., Omar, M. R., & Md Disa, N. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e12940 · Cited by 124
Impact of pyrolysis process conditions on the structure of biochar obtained from apple waste
Barszcz, W., Łożyńska, M., & Molenda, J. (2024) · Scientific Reports · doi:10.1038/s41598-024-61394-8 · Cited by 124
Guo, P., Gu, X., Li, Z., Xu, X., Cao, Y., Yang, G., Kuang, C., Li, X., Qing, Y., & Wu, Y. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.130943 · Cited by 46
Lebrun Thauront, J., Soja, G., Schmidt, H., & Abiven, S. (2024) · GCB Bioenergy · doi:10.1111/gcbb.13170 · Cited by 15
“…is consistent with previous reports that VM content is mainly driven by reported HTT (Budai et al., 2014; Campos et al., 2020; Pariyar et al., 2020; Rodriguez Ortiz et al., 2020; Zhang et al., 2017), followed to a lesser extent by pyrolysis duration and feedstock type (Askeland et al., 2019;…”
Metadata
- Authors
- Ortiz, L. R., Torres, E., Zalazar, D., Zhang, H., Rodriguez, R., & Mazza, G.
- Venue
- Renewable Energy
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 155
- Pages
- 837-847
- ISSN
- 0960-1481 (ISSN-L)
- OpenAlex
- W3014264259
- Cited by
- 189
- References
- 16
- FWCI
- 6.34
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.