The DOI matches its Crossref record; 108 of the 108 references it cites were found in a registry or an index.
Reverse logistics and closed-loop supply chain of Waste Electrical and Electronic Equipment (WEEE)/E-waste: A comprehensive literature review
Abstract
Abstract Reverse logistics (RL) and the closed-loop supply chain (CLSC) are integral parts of the holistic waste management process. One of the important end-of-life (EOL) products considered in the RL/CLSC is Waste Electrical and Electronic Equipment (WEEE)/E-waste. Numerous research papers were published in the RL and CLSC disciplines focusing WEEE separately. However, there is no single review article found on the product-specific issues. To bridge this gap, a total of 157 papers published between 1999 and May 2017 were selected, categorized, analyzed using content analysis method. The method involves four steps: material collection, descriptive analysis, category selection and material evaluation. For the systematic literature review, the steps were followed and four main types of research in the field of RL and CLSC of E-waste, namely designing and planning of reverse distribution, decision making and performance evaluation, conceptual framework, and qualitative studies were identified and reviewed. Research gaps in literature were diagnosed to suggest future research opportunities. The review first of its kind that may provide a useful reference for academicians, researchers and industry practitioners for a better understanding of WEEE focused RL/CLSC activities and research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Qualitative Data Analysis: An Expanded Sourcebook
(1994) · Journal of Environmental Psychology · doi:10.1016/s0272-4944(05)80231-2 · Cited by 48,420
The Circular Economy–A new sustainability paradigm?
Geissdoerfer, M., Savaget, P., Bocken, N. M. P., & Hultink, E. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.048 · Cited by 9,360
Qualitative content analysis: theoretical foundation, basic procedures and software solution
Mayring, P. (2014) · Social Science Open Access Repository (GESIS – Leibniz Institute for the Social Sciences) · Cited by 5,117
Dantzig, G. B., & Ramser, J. H. (1959) · Management Science · doi:10.1287/mnsc.6.1.80 · Cited by 4,985
Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future
Govindan, K., Soleimani, H., & Kannan, D. (2015) · European Journal of Operational Research · doi:10.1016/j.ejor.2014.07.012 · Cited by 1,963
Quantitative models for reverse logistics: A review
Fleischmann, M., Bloemhof-Ruwaard, J. M., Dekker, R., van der Laan, E., van Nunen, J. A. E. E., & Van Wassenhove, L. N. (1997) · European Journal of Operational Research · doi:10.1016/s0377-2217(97)00230-0 · Cited by 1,902
Reconstructing the Giant: On the Importance of Rigour in Documenting the Literature Search Process
Brocke, J. V., Simons, A., Niehaves, B., Reimer, K., Plattfaut, R., & Cleven, A. (2009) · Alexandria (UniSG) (University of St.Gallen) · Cited by 1,779
Stevens, G. C. (1989) · International Journal of Physical Distribution & Materials Management · doi:10.1108/eum0000000000329 · Cited by 1,560
OR FORUM—The Evolution of Closed-Loop Supply Chain Research
Guide, V. D. R., & Van Wassenhove, L. N. (2009) · Operations Research · doi:10.1287/opre.1080.0628 · Cited by 1,408
Conducting content‐analysis based literature reviews in supply chain management
Seuring, S., & Gold, S. (2012) · Supply Chain Management: An International Journal · doi:10.1108/13598541211258609 · Cited by 1,245
Supply Chain Management. Strategy, Planning & Operation
Chopra, S., & Meindl, P. (2007) · Das Summa Summarum des Management · doi:10.1007/978-3-8349-9320-5_22 · Cited by 1,129
Sustainable supply chain management and inter‐organizational resources: a literature review
Gold, S., Seuring, S., & Beske, P. (2010) · Corporate Social Responsibility and Environmental Management · doi:10.1002/csr.207 · Cited by 918
E-waste: An overview on generation, collection, legislation and recycling practices
Kumar, A., Holuszko, M., & Espinosa, D. C. R. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.01.018 · Cited by 875
Reverse Channel Design: The Case of Competing Retailers
Savaskan, R. C., & Wassenhove, L. N. V. (2006) · Management Science · doi:10.1287/mnsc.1050.0454 · Cited by 872
THE IMPACT OF PRODUCT RECOVERY ON LOGISTICS NETWORK DESIGN
FLEISCHMANN, M., BEULLENS, P., BLOEMHOF‐RUWAARD, J. M., & VANWASSENHOVE, L. N. (2001) · Production and Operations Management · doi:10.1111/j.1937-5956.2001.tb00076.x · Cited by 833
Theory Building through Conceptual Methods
Meredith, J. (1993) · International Journal of Operations & Production Management · doi:10.1108/01443579310028120 · Cited by 783
The Literature Review: Six Steps to Success
Machi, L. A., & McEvoy, B. T. (2016) · Corwin eBooks · doi:10.4135/9781071939031 · Cited by 731
MANAGING PRODUCT RETURNS FOR REMANUFACTURING
GUIDE, V. D. R., & VANWASSENHOVE, L. N. (2001) · Production and Operations Management · doi:10.1111/j.1937-5956.2001.tb00075.x · Cited by 708
A review of reverse logistics and closed-loop supply chains: a Journal of Cleaner Production focus
Govindan, K., & Soleimani, H. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.126 · Cited by 638
Network design for reverse logistics☆
SRIVASTAVA, S. (2008) · Omega · doi:10.1016/j.omega.2006.11.012 · Cited by 623
A literature review and perspectives in reverse logistics
Agrawal, S., Singh, R. K., & Murtaza, Q. (2015) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2015.02.009 · Cited by 605
A closed-loop logistics model for remanufacturing
Jayaraman, V, Guide, V. D. R., & Srivastava, R. (1999) · Journal of the Operational Research Society · doi:10.1057/palgrave.jors.2600716 · Cited by 537
Ravi, V., Shankar, R., & Tiwari, M. K. (2005) · Computers & Industrial Engineering · doi:10.1016/j.cie.2005.01.017 · Cited by 474
Kannan, G., Sasikumar, P., & Devika, K. (2010) · Applied Mathematical Modelling · doi:10.1016/j.apm.2009.06.021 · Cited by 400
Concurrent product and closed-loop supply chain design with an application to refrigerators
Krikke, H., Bloemhof-Ruwaard, J., & Van Wassenhove, L. N. (2003) · International Journal of Production Research · doi:10.1080/0020754031000120087 · Cited by 392
Nobre, G. C., & Tavares, E. (2017) · Scientometrics · doi:10.1007/s11192-017-2281-6 · Cited by 375
Electronic waste (e-waste): Material flows and management practices in Nigeria
Nnorom, I. C., & Osibanjo, O. (2008) · Waste Management · doi:10.1016/j.wasman.2007.06.012 · Cited by 343
Multi-period reverse logistics network design
Alumur, S. A., Nickel, S., Saldanha-da-Gama, F., & Verter, V. (2012) · European Journal of Operational Research · doi:10.1016/j.ejor.2011.12.045 · Cited by 325
How Does Product Recovery Affect Quality Choice?
Atasu, A., & Souza, G. C. (2013) · Production and Operations Management · doi:10.1111/j.1937-5956.2011.01290.x · Cited by 323
The economics of cell phone reuse and recycling
Geyer, R., & Doctori Blass, V. (2010) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2228-z · Cited by 318
Reverse logistics system planning for recycling electrical appliances and computers in Taiwan
Shih, L.-H. (2001) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(00)00098-7 · Cited by 315
Electronic waste as a secondary source of critical metals: Management and recovery technologies
Işıldar, A., Rene, E. R., van Hullebusch, E. D., & Lens, P. N. L. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.07.031 · Cited by 310
How Collection Cost Structure Drives a Manufacturer's Reverse Channel Choice
Atasu, A., Toktay, L. B., & Van Wassenhove, L. N. (2013) · Production and Operations Management · doi:10.1111/j.1937-5956.2012.01426.x · Cited by 306
Nagurney, A., & Toyasaki, F. (2005) · Transportation Research Part E: Logistics and Transportation Review · doi:10.1016/j.tre.2003.12.001 · Cited by 293
A model for reverse logistics entry by third-party providers
Krumwiede, D. W., & Sheu, C. (2002) · Omega · doi:10.1016/s0305-0483(02)00049-x · Cited by 293
A heuristic approach to logistics network design for end-of-lease computer products recovery
Lee, D.-H., & Dong, M. (2008) · Transportation Research Part E: Logistics and Transportation Review · doi:10.1016/j.tre.2006.11.003 · Cited by 280
Liu, H., Lei, M., Deng, H., Keong Leong, G., & Huang, T. (2016) · Omega · doi:10.1016/j.omega.2015.07.002 · Cited by 273
Iacovidou, E., Millward-Hopkins, J., Busch, J., Purnell, P., Velis, C. A., Hahladakis, J. N., Zwirner, O., & Brown, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.002 · Cited by 268
Reverse logistics in the electronic industry of China: a case study
Hung Lau, K., & Wang, Y. (2009) · Supply Chain Management: An International Journal · doi:10.1108/13598540910995228 · Cited by 267
Mont, O. (2008) · Lund University Publications (Lund University) · Cited by 248
Jayaraman, V. (2006) · International Journal of Production Research · doi:10.1080/00207540500250507 · Cited by 241
Qiang, Q., Ke, K., Anderson, T., & Dong, J. (2013) · Omega · doi:10.1016/j.omega.2011.08.011 · Cited by 215
Conducting a Literature Review — The Example of Sustainability in Supply Chains
Seuring, S. A., Müller, M., Westhaus, M., & Morana, R. (2005) · Physica-Verlag eBooks · doi:10.1007/3-7908-1636-1_7 · Cited by 195
Mazhar, M. I., Kara, S., & Kaebernick, H. (2007) · Journal of Operations Management · doi:10.1016/j.jom.2007.01.021 · Cited by 193
Stochastic reverse logistics network design for waste of electrical and electronic equipment
Ayvaz, B., Bolat, B., & Aydın, N. (2015) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2015.07.006 · Cited by 191
Joint procurement and production decisions in remanufacturing under quality and demand uncertainty
Mukhopadhyay, S. K., & Ma, H. (2008) · International Journal of Production Economics · doi:10.1016/j.ijpe.2008.07.032 · Cited by 184
Evaluation of sites for the location of WEEE recycling plants in Spain
Queiruga, D., Walther, G., Benito, J. G., & Spengler, T. (2007) · Waste Management · doi:10.1016/j.wasman.2006.11.001 · Cited by 181
The challenge of reverse logistics in catalog retailing
Autry, C. W., Daugherty, P. J., & Glenn Richey, R. (2001) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/09600030110366384 · Cited by 177
Remanufacturing of mobile phones—capacity, program and facility adaptation planning
Franke, C., Basdere, B., Ciupek, M., & Seliger, S. (2006) · Omega · doi:10.1016/j.omega.2005.01.016 · Cited by 176
RFID-based product information in end-of-life decision making
Parlikad, A. K., & McFarlane, D. (2007) · Control Engineering Practice · doi:10.1016/j.conengprac.2006.08.008 · Cited by 176
Sodhi, M. S., & Reimer, B. (2001) · OR Spektrum · doi:10.1007/pl00013347 · Cited by 175
Zikopoulos, C., & Tagaras, G. (2007) · European Journal of Operational Research · doi:10.1016/j.ejor.2006.10.025 · Cited by 173
Kilic, H. S., Cebeci, U., & Ayhan, M. B. (2015) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2014.12.010 · Cited by 163
Extended Producer Responsibility: National, International, and Practical Perspectives
Lifset, R., Atasu, A., & Tojo, N. (2013) · Journal of Industrial Ecology · doi:10.1111/jiec.12022 · Cited by 162
Simulation modelling of reverse logistics networks
Kara, S., Rugrungruang, F., & Kaebernick, H. (2007) · International Journal of Production Economics · doi:10.1016/j.ijpe.2006.04.009 · Cited by 162
Ghisolfi, V., Chaves, G. D. L. D., Siman, R. R., & Xavier, L. H. (2016) · Waste Management · doi:10.1016/j.wasman.2016.12.018 · Cited by 162
Pérez-Belis, V, Bovea, M., & Ibáñez-Forés, V (2015) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x14557382 · Cited by 160
Optimizing reverse logistic costs for recycling end-of-life electrical and electronic products
Dat, L. Q., Truc Linh, D. T., Chou, S.-Y., & Yu, V. F. (2012) · Expert Systems with Applications · doi:10.1016/j.eswa.2011.12.031 · Cited by 159
Xu, Z., Elomri, A., Pokharel, S., Zhang, Q., Ming, X. G., & Liu, W. (2017) · Waste Management · doi:10.1016/j.wasman.2017.02.024 · Cited by 159
Determinants and logistics of e-waste recycling
Kochan, C. G., Pourreza, S., Tran, H., & Prybutok, V. R. (2016) · The International Journal of Logistics Management · doi:10.1108/ijlm-02-2014-0021 · Cited by 154
Impact of closed-loop network configurations on carbon footprints: A case study in copiers
Krikke, H. R. (2011) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2011.07.001 · Cited by 147
Islam, M. T., Abdullah, A. B., Shahir, S. A., Kalam, M. A., Masjuki, H. H., Shumon, R., & Rashid, M. H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.111 · Cited by 145
Self-citationStatus quo of e-waste management in mainland China
Li, J., Bao-guo, T. I. A. N., Liu, T., Liu, H., Wen, X., & Honda, S. (2006) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-005-0144-3 · Cited by 142
Designing a sustainable reverse logistics channel: the 18 generic structures framework
Korchi, A. E., & Millet, D. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.11.013 · Cited by 142
Cheng, Y.-H., & Lee, F. (2009) · Industrial Marketing Management · doi:10.1016/j.indmarman.2009.10.004 · Cited by 140
Akçalı, E., Çetinkaya, S., & Üster, H. (2008) · Networks · doi:10.1002/net.20267 · Cited by 139
Value of information in remanufacturing complex products
Ferrer, G., & Ketzenberg, M. E. (2004) · IIE Transactions · doi:10.1080/07408170490274223 · Cited by 137
Remanufacturing and the Component Commonality Decision
Subramanian, R., Ferguson, M. E., & Toktay, L. B. (2012) · Production and Operations Management · doi:10.1111/j.1937-5956.2012.01350.x · Cited by 137
On the optimal design of the disassembly and recovery processes
Xanthopoulos, A., & Iakovou, E. T. (2009) · Waste Management · doi:10.1016/j.wasman.2008.11.009 · Cited by 136
Wadhwa, S., Madaan, J., & Chan, F. T. S. (2008) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2008.01.006 · Cited by 132
Business case Roteb: recovery strategies for monitors
Krikke, H. R., van Harten, A., & Schuur, P. C. (1999) · Computers & Industrial Engineering · doi:10.1016/s0360-8352(99)00163-1 · Cited by 129
A reverse logistics diagnostic tool: the case of the consumer electronics industry
Janse, B., Schuur, P. C., & Brito, M. D. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2333-z · Cited by 128
WEEE recycling in Zhejiang Province, China: generation, treatment, and public awareness
Cao, J., Chen, Y., Shi, B., Lu, B., Zhang, X., Ye, X., Zhai, G., Zhu, C., & Zhou, G. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.147 · Cited by 123
Multi-criteria analysis for the determination of the best WEEE management scenario in Cyprus
Rousis, K., Moustakas, K. G., Malamis, S., Papadopoulos, A., & Loizidou, M. (2008) · Waste Management · doi:10.1016/j.wasman.2007.12.001 · Cited by 121
Towards improved understanding of reverse logistics – Examining mediating role of return intention
Dixit, S., & Badgaiyan, A. J. (2016) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2015.11.021 · Cited by 118
Achillas, C., Vlachokostas, C., MOUSSIOPOULOS, N., & Banias, G. (2009) · Waste Management · doi:10.1016/j.wasman.2009.11.029 · Cited by 110
Modelling a recovery network for WEEE: A case study in Portugal
Gomes, M. I., Barbosa‐Póvoa, A. P., & Novais, A. Q. (2011) · Waste Management · doi:10.1016/j.wasman.2011.02.023 · Cited by 102
Fuzzy approach for the selection of third party reverse logistics provider
Govindan, K. (2009) · Asia Pacific Journal of Marketing and Logistics · doi:10.1108/13555850910973865 · Cited by 102
The effect of remanufacturing on procurement decisions for resellers in secondary markets
Robotis, A., Bhattacharya, S., & Wassenhove, L. N. V. (2004) · European Journal of Operational Research · doi:10.1016/j.ejor.2004.01.013 · Cited by 96
Supply Chain Management Under Fuzziness: Recent Developments and Techniques
Kahraman, C., & Öztayşi, B. (2014) · Studies in fuzziness and soft computing · doi:10.1007/978-3-642-53939-8 · Cited by 90
Caught between ecology and economy: end-of-life aspects of environmentally conscious manufacturing
Nagel, C., & Meyer, P. (1999) · Computers & Industrial Engineering · doi:10.1016/s0360-8352(99)00165-5 · Cited by 88
Tan, A. W. K., Yu, W., & Arun, K. (2003) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/09600030310461007 · Cited by 88
On the effect of quality overestimation in remanufacturing
Wassenhove, L. N. V., & Zikopoulos, C. (2009) · International Journal of Production Research · doi:10.1080/00207540903150585 · Cited by 86
Economic Feasibility of Recycling Photovoltaic Modules
Choi, J., & Fthenakis, V. M. (2010) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2010.00289.x · Cited by 81
To develop a third-party reverse logistics network for end-of-life vehicles in Iran
Mahmoudzadeh, M., Mansour, S., & Karimi, B. (2013) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2013.06.006 · Cited by 77
Shumon, R., Ahmed, S., & Islam, M. T. (2014) · Environmental Earth Sciences · doi:10.1007/s12665-014-3129-5 · Cited by 75
Self-citationWEEE treatment strategies’ evaluation using fuzzy LINMAP method
Bereketli, İ., Genevois, M. E., Albayrak, Y. E., & Ozyol, M. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.06.015 · Cited by 69
Shokouhyar, S., Mansour, S., & Karimi, B. (2012) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-012-0694-x · Cited by 67
Demajorovic, J., Augusto, E., & de Souza, M. T. S. (2016) · Ambiente & sociedade · doi:10.1590/1809-4422asoc141545v1922016 · Cited by 62
A Decision Support System for Planning Remanufacturing at Nortel Networks
Linton, J. D., & Johnston, D. (2000) · INFORMS Journal on Applied Analytics · doi:10.1287/inte.30.6.17.11631 · Cited by 61
Jafari, A., Heydari, J., & Keramati, A. (2017) · Environment, Development and Sustainability · doi:10.1007/s10668-015-9737-8 · Cited by 60
Chiou, C. Y., Chen, H. C., Yu, C., & Yeh, C. Y. (2012) · Procedia - Social and Behavioral Sciences · doi:10.1016/j.sbspro.2012.03.203 · Cited by 58
Impactos dos desastres naturais nos sistemas ambiental e socioeconômico: o que faz a diferença?
Mata-Lima, H., Alvino-Borba, A., Pinheiro, A., Mata-Lima, A., & Almeida, J. A. (2013) · Ambiente & sociedade · doi:10.1590/s1414-753x2013000300004 · Cited by 58
Value recovery network design for product returns
Srivastava, S. K. (2008) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/09600030810875409 · Cited by 57
Definition of generic re-use operating models for electrical and electronic equipment
Kissling, R., Fitzpatrick, C., Boeni, H., Luepschen, C., Andrew, S., & Dickenson, J. (2012) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2012.04.003 · Cited by 56
Yu, H., & Solvang, W. D. (2016) · Sustainability · doi:10.3390/su8121331 · Cited by 55
A multi-period model for managing used product returns
Nenes, G., & Nikolaidis, Y. (2011) · International Journal of Production Research · doi:10.1080/00207543.2011.609650 · Cited by 53
Roy, R., Shehab, E., & Tiwari, A. (2009) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm.2009.06820eaa.001 · Cited by 52
Performance Evaluation In Reverse Logistics With Data Envelopment Analysis
Tonanont, A. (2009) · Cited by 45
Zhang, H., Li, J., Shrivastava, P., et al. (2004) · CIRP Annals · doi:10.1016/s0007-8506(07)60632-5 · Cited by 39
A Hierarchical Decision Model for Re-manufacturing and Re-use
Guide, V. D. R., & Pentico, D. W. (2003) · International Journal of Logistics Research and Applications · doi:10.1080/1367556031000063040 · Cited by 38
A PSO-based optimum consumer incentive policy for WEEE incorporating reliability of components
Agarwal, G., Barari, S., & Tiwari, M. K. (2011) · International Journal of Production Research · doi:10.1080/00207543.2011.590538 · Cited by 37
Design of closed‐loop supply chain and product recovery management for fast‐moving consumer goods
Grant, D. B., & Banomyong, R. (2010) · Asia Pacific Journal of Marketing and Logistics · doi:10.1108/13555851011026971 · Cited by 35
Chung, W.-H., Kremer, G. E. O., & Wysk, R. A. (2013) · Journal of Mechanical Design · doi:10.1115/1.4025022 · Cited by 28
Design of reverse and forward supply chain network: a case study
Chandiran, P., & Rao, K. S. P. (2008) · International Journal of Logistics Systems and Management · doi:10.1504/ijlsm.2008.017601 · Cited by 22
Dixit, S., & Vaish, A. (2013) · International Journal of Logistics Systems and Management · doi:10.1504/ijlsm.2013.055559 · Cited by 18
Chang, X., Huo, J., & Chen, S. (2006) · IEEE International Conference on Service Operations and Logistics, and Informatics (SOLI) · doi:10.1109/soli.2006.234917 · Cited by 14
MOUSSIOPOULOS, N., Karagiannidis, A., Papadopoulos, A. M., Achillas, C., Antonopoulos, I., Perkoulidis, G., Vlachos, D., & Vlachokostas, C. (2012) · International Journal of Environment and Waste Management · doi:10.1504/ijewm.2012.048145 · Cited by 10
Research works printed but not linked: 60
- Achillas, 2012, A multi-objective decision-making model to select waste electrical and electronic equipment transportation media, Resources, Conservation and Recycling, 66, 76, 10.1016/j.resconrec.2012.01.004 · DOI
- Ahluwalia, 2006, Multi-objective reverse logistics model for integrated computer waste management, Waste management & research, 24, 514, 10.1177/0734242X06067252 · doi:10.1177/0734242x06067252
- Amin, 2012, A proposed mathematical model for closed-loop network configuration based on product life cycle, The International Journal of Advanced Manufacturing Technology, 58, 791, 10.1007/s00170-011-3407-2 · doi:10.1007/s00170-011-3407-2
- Amin, 2013, A three-stage model for closed-loop supply chain configuration under uncertainty, International Journal of Production Research, 51, 1405, 10.1080/00207543.2012.693643 · doi:10.1080/00207543.2012.693643
- Arabi, 2017, Optimizing a warranty–based sustainable product service system using game theory, International Journal of Sustainable Engineering, 1
- Assavapokee, 2012, Reverse production system infrastructure design for electronic products in the state of Texas, Computers & Industrial Engineering, 62, 129, 10.1016/j.cie.2011.09.001 · doi:10.1016/j.cie.2011.09.001
- Ayvaz, 2014, Proposal of a Stochastic Programming Model for Reverse Logistics Network Design under Uncertainties, International Journal of Supply Chain Management, 3, 33
- Cagno, 2008, Modelling and planning of Product Recovery Network: the case study of end-of-life refrigerators in Italy, International Journal of Environmental Technology and Management, 8, 385, 10.1504/IJETM.2008.017509 · doi:10.1504/ijetm.2008.017509
- Caiado, 2017, A characterization of the Brazilian market of reverse logistic credits (RLC) and an analogy with the existing carbon credit market, Resources, Conservation and Recycling, 118, 47, 10.1016/j.resconrec.2016.11.021 · doi:10.1016/j.resconrec.2016.11.021
- Chen, 2010, Reverse logistics demand forecasting under demand uncertainty, ICLEM 2010: Logistics For Sustained Economic Development: Infrastructure, Information, Integration., 343
- Chen, 2015, An integrated closed-loop supply chain model with location allocation problem and product recycling decisions, International Journal of Production Research, 53, 3120, 10.1080/00207543.2014.975849 · doi:10.1080/00207543.2014.975849
- Chouinard, 2008, A stochastic programming approach for designing supply loops, International Journal of Production Economics, 113, 657, 10.1016/j.ijpe.2007.10.023 · DOI
- Deng, C.-L., Shao, C.-M., 2009. Multi-Product Min-Cost Recycling Network Flow Problem, in: Chou, S.-Y., Trappey, A., Pokojski, J.,Smith, S. (Eds.), Global Perspective for Competitive Enterprise, Economy and Ecology: Proceedings of the 16th ISPE International Conference on Concurrent Engineering. Springer London, London, pp. 653-661. · doi:10.1007/978-1-84882-762-2_62
- Dhib, S., Addouche, S.-A., El Mhamdi, A., Loukil, T., 2016. Performance Study for a Sustainable Strategy: Case of Electrical and Electronic Equipments Waste, in: Bouras, A., Eynard, B., Foufou, S.,Thoben, K.-D. (Eds.), Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October19-21, 2015, Revised Selected Papers. Springer International Publishing, Cham, pp. 572-587. · doi:10.1007/978-3-319-33111-9_52
- Directive, 2012, Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment, WEEE. Official Journal of the European Union L, 197, 38
- Easwaran, 2010, A closed-loop supply chain network design problem with integrated forward and reverse channel decisions, IIE Transactions, 42, 779, 10.1080/0740817X.2010.504689 · doi:10.1080/0740817x.2010.504689
- Fernandes, 2010, The retrofit of a closed-loop distribution network: the case of lead batteries, Computer Aided Chemical Engineering, 28, 1213, 10.1016/S1570-7946(10)28203-2 · doi:10.1016/s1570-7946(10)28203-2
- Galbreth, 2010, Offshore remanufacturing with variable used product condition, Decision Sciences, 41, 5, 10.1111/j.1540-5915.2009.00257.x · doi:10.1111/j.1540-5915.2009.00257.x
- Gallo, 2010, The Simulation of Hybrid Logic in Reverse Logistics Network, Selected Topics in System Science and Simulation Engineering, 378
- Gamberini, 2010, On the integration of planning and environmental impact assessment for a WEEE transportation network—A case study, Resources, Conservation and Recycling, 54, 937, 10.1016/j.resconrec.2010.02.001 · DOI
- Golinska, 2011, Recovery Network Arrangements: The WEEE Case, Information Technologies in Environmental Engineering, 579
- Grunow, 2009, Designing the reverse network for WEEE in Denmark, CIRP Annals - Manufacturing Technology, 58, 391, 10.1016/j.cirp.2009.03.036 · doi:10.1016/j.cirp.2009.03.036
- Guide, 2008, The optimal disposition decision for product returns, Operations Management Research, 1, 6, 10.1007/s12063-007-0001-8 · doi:10.1007/s12063-007-0001-8
- Gupta, 2009, A goal programming model for the operation of closed-loop supply chains, Engineering Optimization, 41, 713, 10.1080/03052150902802242 · doi:10.1080/03052150902802242
- Hammond, 2007, Closed-loop supply chain network equilibrium under legislation, European Journal of Operational Research, 183, 895, 10.1016/j.ejor.2006.10.033 · doi:10.1016/j.ejor.2006.10.033
- Hanafi, J., Christiani, A., Kristina, H.J., Utama, K.P., 2013. Collecting End-of-Life Mobile Phones in Jakarta: A Pilot, in: Nee, A.Y.C., Song, B.,Ong, S.-K. (Eds.), Re-engineering Manufacturing for Sustainability: Proceedings of the 20th CIRP International Conference on Life Cycle Engineering, Singapore 17-19 April, 2013. Springer Singapore, Singapore, pp. 365-370. · DOI
- Hong, 2012, Modeling closed-loop supply chains in the electronics industry: A retailer collection application, Transportation Research Part E: Logistics and Transportation Review, 48, 817, 10.1016/j.tre.2012.01.006 · doi:10.1016/j.tre.2012.01.006
- Kawa, A., Golinska, P., 2010. Supply Chain Arrangements in Recovery Network, in: Jędrzejowicz, P., Nguyen, N.T., Howlet, R.J.,Jain, L.C. (Eds.), Agent and Multi-Agent Systems: Technologies and Applications: 4th KES International Symposium, KES-AMSTA 2010, Gdynia, Poland, June 23-25, 2010, Proceedings. Part II. Springer Berlin Heidelberg, Berlin, Heidelberg, pp. 292-301. · doi:10.1007/978-3-642-13541-5_30
- Keh, 2012, Financial Performance, Environmental Compliance, and Social Outcomes: The three Challenges of Reverse Logistics, Case Study of IBM Montpellier. Supply Chain Forum: An International Journal, 13, 26
- Kim, 2009, Vehicle routing in reverse logistics for recycling end-of-life consumer electronic goods in South Korea, Transportation Research Part D, 14, 291, 10.1016/j.trd.2009.03.001 · DOI
- Landers, 2000, The virtual warehousing concept, Transportation Research Part E: Logistics and Transportation Review, 36, 115, 10.1016/S1366-5545(99)00024-1 · doi:10.1016/s1366-5545(99)00024-1
- Lee, 2007, An investigation of perception gap of reverse logistics service quality: the case of mobile phone industry, International Journal of Global Environmental issues, 7, 25, 10.1504/IJGENVI.2007.012075 · doi:10.1504/ijgenvi.2007.012075
- Li, 2009, Collection Pricing Decision in a Remanufacturing System Considering Random Yield and Random Demand, Systems Engineering - Theory & Practice, 29, 19, 10.1016/S1874-8651(10)60060-9 · doi:10.1016/s1874-8651(10)60060-9
- Mar-Ortiz, 2011, Design of a recovery network for WEEE collection: the case of Galicia, Spain. Journal of the Operational Research Society, 62, 1471, 10.1057/jors.2010.114 · doi:10.1057/jors.2010.114
- Mar-Ortiz, 2012, Reverse Logistics Models and Algorithms: Optimizing WEEE Recovery Systems, Computación y Sistemas, 16, 491
- Mar-Ortiz, 2013, Designing routes for WEEE collection: the vehicle routing problem with split loads and date windows, Journal of Heuristics, 19, 103, 10.1007/s10732-011-9159-1 · doi:10.1007/s10732-011-9159-1
- Maslennikova, 2000, Xerox’s approach to sustainability, Interfaces, 30, 226, 10.1287/inte.30.3.226.11666 · doi:10.1287/inte.30.3.226.11666
- Piplani, 2012, Robust optimisation approach to the design of service networks for reverse logistics, International Journal of Production Research, 50, 1424, 10.1080/00207543.2011.571942 · doi:10.1080/00207543.2011.571942
- Potter, 2011, Measures for auditing performance and integration in closed-loop supply chains, Supply Chain Management: An International Journal, 16, 43, 10.1108/13598541111103494 · doi:10.1108/13598541111103494
- Qiang, 2016, Robust reverse logistics network design for the waste of electrical and electronic equipment (WEEE) under recovery uncertainty, Journal of Environmental Biology, 37, 1153
- Ravi, 2005, Productivity improvement of a computer hardware supply chain, International Journal of Productivity and Performance Management, 54, 239, 10.1108/17410400510593802 · doi:10.1108/17410400510593802
- Ravi, 2008, Selection of a reverse logistics project for end-of-life computers: ANP and goal programing approach, International Journal of Production Research, 46, 4849, 10.1080/00207540601115989 · doi:10.1080/00207540601115989
- Sabtu, 2015, Multi-criteria decision making for reverse logistic contractor selection in e-waste recycling industry using polytomous rasch model, Jurnal Teknologi, 77, 119
- Salema, 2007, An optimization model for the design of a capacitated multi-product reverse logistics network with uncertainty, European Journal of Operational Research, 179, 1063, 10.1016/j.ejor.2005.05.032 · doi:10.1016/j.ejor.2005.05.032
- Sasikumar, 2011, Integration of closed loop distribution supply chain network and 3PRLP selection for the case of battery recycling, International Journal of Production Research, 49, 3363, 10.1080/00207541003794876 · doi:10.1080/00207541003794876
- Schultmann, 2003, Closed-Loop Supply Chains for Spent Batteries, Interfaces, 33, 57, 10.1287/inte.33.6.57.25183 · doi:10.1287/inte.33.6.57.25183
- Sharma, 2007, Asset management with reverse product flows and environmental considerations, Computers & Operations Research, 34, 464, 10.1016/j.cor.2005.03.009 · doi:10.1016/j.cor.2005.03.009
- Shi, 2012, Information flow in reverse logistics: an industrial information integration study, Information Technology and Management, 13, 217, 10.1007/s10799-012-0116-y · doi:10.1007/s10799-012-0116-y
- Shih, 2012, A forecasting decision on the sales volume of printers in Taiwan: An exploitation of the Analytic Network Process, Computers & Mathematics with Applications, 64, 1545, 10.1016/j.camwa.2011.12.082 · doi:10.1016/j.camwa.2011.12.082
- Shokohyar, 2013, Simulation-based optimisation of a sustainable recovery network for Waste from Electrical and Electronic Equipment (WEEE), International Journal of Computer Integrated Manufacturing, 26, 487, 10.1080/0951192X.2012.731613 · doi:10.1080/0951192x.2012.731613
- Shokohyar, 2013, Simulation-based optimization of ecological leasing: a step toward extended producer responsibility (EPR), The International Journal of Advanced Manufacturing Technology, 66, 159, 10.1007/s00170-012-4315-9 · DOI
- Shokouhyar, 2017, Designing a sustainable recovery network for waste from electrical and electronic equipment using a genetic algorithm, International Journal of Environment and Sustainable Development, 16, 60, 10.1504/IJESD.2017.080851 · doi:10.1504/ijesd.2017.080851
- Tan, 2008, A decision making model to maximise the value of reverse logistics in the computer industry, International Journal of Logistics Systems and Management, 4, 297, 10.1504/IJLSM.2008.017478 · doi:10.1504/ijlsm.2008.017478
- Tari, 2014, Collection center location with equity considerations in reverse logistics networks, INFOR: Information Systems and Operational Research, 52, 157
- Tuzkaya, 2011, A methodology for the strategic design of reverse logistics networks and its application in the Turkish white goods industry, International Journal of Production Research, 49, 4543, 10.1080/00207543.2010.492804 · doi:10.1080/00207543.2010.492804
- Walther, 2008, Negotiation-based coordination in product recovery networks, International Journal of Production Economics, 111, 334, 10.1016/j.ijpe.2006.12.069 · doi:10.1016/j.ijpe.2006.12.069
- Wang, 2007, Fast Heuristics for Designing Integrated E-Waste Reverse Logistics Networks, IEEE Transactions on Electronics Packaging Manufacturing, 30, 147, 10.1109/TEPM.2007.899112 · doi:10.1109/tepm.2007.899112
- Wang, 2011, Optimal design of reverse logistics network on e-waste in Shanghai, International Journal of Networking and Virtual Organisations, 8, 209, 10.1504/IJNVO.2011.039995 · doi:10.1504/ijnvo.2011.039995
- Wee Kwan Tan, 2006, A decision-making model for reverse logistics in the computer industry, The International Journal of Logistics Management, 17, 331, 10.1108/09574090610717518 · DOI
- Wei, 2013, Reverse channel decisions for a fuzzy closed-loop supply chain, Applied Mathematical Modelling, 37, 1502, 10.1016/j.apm.2012.04.003 · DOI
Cited by
Nascimento, D. L. M., Alencastro, V., Quelhas, O. L. G., Caiado, R. G. G., Garza-Reyes, J. A., Rocha-Lona, L., & Tortorella, G. (2019) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-03-2018-0071 · Cited by 903
Circular supply chain management: A state-of-art review and future opportunities
Lahane, S., Kant, R., & Shankar, R. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120859 · Cited by 416
Circular economy business models and operations management
Lopes de Sousa Jabbour, A. B., Rojas Luiz, J. V., Rojas Luiz, O., Jabbour, C. J. C., Ndubisi, N. O., Caldeira de Oliveira, J. H., & Junior, F. H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.06.349 · Cited by 330
A global review of consumer behavior towards e-waste and implications for the circular economy
Islam, M. T., Huda, N., Baumber, A., Shumon, R., Zaman, A., Ali, F., Hossain, R., & Sahajwalla, V. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128297 · Cited by 241
Self-citationEnd-of-life photovoltaic modules: a systematic quantitative literature review
Mahmoudi, S., Huda, N., Alavi, Z., Islam, M. T., & Behnia, M. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.03.018 · Cited by 226
Self-citation
Metadata
- Authors
- Islam, M. T., & Huda, N.
- Venue
- Resources, Conservation and Recycling
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 137
- Pages
- 48-75
- ISSN
- 0921-3449 (ISSN-L)
- OpenAlex
- W2806343292
- Cited by
- 375
- References
- 108
- FWCI
- 60.76
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Funders
- Macquarie University
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.