The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
Factors affecting wood, energy grass and straw pellet durability – A review
Open accessAbstract
Pellets produced from wood, energy grasses and straw present a higher energy density feedstock than wood chips or bales, and therefore reduce the costs of handling, transport and storage throughout the supply chain. European specifications provide limits to the proportion of fines (particles less than 3.15 mm) allowed in pellets, which refers to the durability of the pellets. Fines have implications for health and safety in supply chains, and cause issues with slag formation in combustion systems. This paper reviews the factors affecting biomass pellet durability. The industrial trade for wood pellets has expanded greatly over the last decade and involves the international trade of tens of million tonnes annually. Due to increasing demands for pellets, there has been growing interest in utilising more varied biomass types. The aim of this review is to examine feedstock qualities and pelleting conditions that produce durable pellets. Pellet durability can be affected by the feedstock characteristics, the moisture content or size reduction during pre-processing, and by pelleting conditions, including the use of binders, feedstock mixes, temperatures or die pressures. Post-production conditions can also affect durability, such as the storage conditions and handling frequency, therefore an understanding of all the factors affecting durability throughout the supply chain is needed in order to prioritise where advances can be made.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Factors affecting strength and durability of densified biomass products
Kaliyan, N., & Vance Morey, R. (2009) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2008.08.005 · Cited by 1,255
Obernberger, I., & Thek, G. (2004) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2003.07.006 · Cited by 764
Tumuluru, J. S., Wright, C. T., Hess, J. R., & Kenney, K. L. (2011) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.324 · Cited by 705
Grinding performance and physical properties of wheat and barley straws, corn stover and switchgrass
Mani, S., Tabil, L. G., & Sokhansanj, S. (2004) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2004.03.007 · Cited by 675
Lignin and Biomass: A Negative Correlation for Wood Formation and Lignin Content in Trees
Novaes, E., Kirst, M., Chiang, V., Winter-Sederoff, H., & Sederoff, R. (2010) · Plant Physiology · doi:10.1104/pp.110.161281 · Cited by 421
A study of bonding and failure mechanisms in fuel pellets from different biomass resources
Stelte, W., Holm, J. K., Sanadi, A. R., Barsberg, S., Ahrenfeldt, J., & Henriksen, U. B. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2010.11.003 · Cited by 378
Quality properties of pelletised sawdust, logging residues and bark
Lehtikangas, P. (2001) · Biomass and Bioenergy · doi:10.1016/s0961-9534(00)00092-1 · Cited by 317
High-pressure densification of wood residues to form an upgraded fuel
Li, Y. (2000) · Biomass and Bioenergy · doi:10.1016/s0961-9534(00)00026-x · Cited by 315
Recent developments in biomass pelletization – A review
Stelte, W., Sanadi, A. R., Shang, L., Holm, J. K., Ahrenfeldt, J., & Henriksen, U. B. (2012) · BioResources · doi:10.15376/biores.7.3.4451-4490 · Cited by 295
Stelte, W., Holm, J. K., Sanadi, A. R., Barsberg, S., Ahrenfeldt, J., & Henriksen, U. B. (2011) · Fuel · doi:10.1016/j.fuel.2011.05.011 · Cited by 265
Physical properties of pellets made from sorghum stalk, corn stover, wheat straw, and big bluestem
Theerarattananoon, K., Xu, F., Wilson, J., Ballard, R., Mckinney, L., Staggenborg, S., Vadlani, P., Pei, Z. J., & Wang, D. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.11.014 · Cited by 236
Carone, M. T., Pantaleo, A., & Pellerano, A. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2010.08.052 · Cited by 234
Compaction characteristics of barley, canola, oat and wheat straw
Adapa, P., Tabil, L., & Schoenau, G. (2009) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2009.06.022 · Cited by 234
Development of agri-pellet production cost and optimum size
Sultana, A., Kumar, A., & Harfield, D. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.02.011 · Cited by 203
Adapa, P., Tabil, L., & Schoenau, G. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2010.10.004 · Cited by 190
An environmental impact assessment of exported wood pellets from Canada to Europe
Magelli, F., Boucher, K., Bi, H. T., Melin, S., & Bonoli, A. (2009) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2008.08.016 · Cited by 190
Toward an Understanding of Controlling Parameters in Softwood and Hardwood Pellets Production
Holm, J. K., Henriksen, U. B., Hustad, J. E., & Sørensen, L. H. (2006) · Energy & Fuels · doi:10.1021/ef0503360 · Cited by 189
Ancillary equipment for biomass gasification
Cummer, K. (2002) · Biomass and Bioenergy · doi:10.1016/s0961-9534(02)00038-7 · Cited by 176
Nielsen, N. P. K., Gardner, D. J., Poulsen, T., & Felby, C. (2009) · Wood and Fiber Science (Society of Wood Science and Technology) · Cited by 171
A review of European standards for pellet quality
García-Maraver, A., Popov, V., & Zamorano, M. (2011) · Renewable Energy · doi:10.1016/j.renene.2011.05.013 · Cited by 166
A Review of Pellets from Different Sources
Miranda, T., Montero, I., Sepúlveda, F., Arranz, J., Rojas, C., & Nogales, S. (2015) · Materials · doi:10.3390/ma8041413 · Cited by 166
Bergström, D., Israelsson, S., Öhman, M., Dahlqvist, S.-A., Gref, R., Boman, C., & Wästerlund, I. (2008) · Fuel Processing Technology · doi:10.1016/j.fuproc.2008.06.001 · Cited by 161
Karkania, V., Fanara, E., & Zabaniotou, A. A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.11.028 · Cited by 159
Industrial processes for biomass drying and their effects on the quality properties of wood pellets
Ståhl, M., Granström, K., Berghel, J., & Renström, R. (2004) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2003.08.019 · Cited by 154
Physical and chemical properties of pellets from energy crops and cereal straws
Carroll, J., & Finnan, J. (2012) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2012.03.012 · Cited by 146
Svedberg, U., Högberg, H., Högberg, J., & Galle, B. (2004) · The Annals of Occupational Hygiene · doi:10.1093/annhyg/meh015 · Cited by 146
Evaluation of different strategies for pulverization of forest biomasses
Esteban, L. S., & Carrasco, J. E. (2006) · Powder Technology · doi:10.1016/j.powtec.2006.05.018 · Cited by 142
The effect of bark content on quality parameters of Scots pine (Pinus sylvestris L.) pellets
Filbakk, T., Jirjis, R., Nurmi, J., & Høibø, O. A. (2010) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2010.09.011 · Cited by 141
Experimental trials to make wheat straw pellets with wood residue and binders
Lu, D., Tabil, L. G., Wang, D., Wang, G., & Emami, S. (2014) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2014.07.029 · Cited by 139
Stelte, W., Clemons, C. C., Holm, J. K., Ahrenfeldt, J., Henriksen, U. B., & Sanadi, A. R. (2011) · BioEnergy Research · doi:10.1007/s12155-011-9169-8 · Cited by 127
Arshadi, M., Gref, R., Geladi, P. L. M., Dahlqvist, S.-A., & Lestander, T. A. (2008) · Fuel Processing Technology · doi:10.1016/j.fuproc.2008.07.001 · Cited by 125
Effect of biomaterial characteristics on pelletizing properties and biofuel pellet quality
Samuelsson, R., Thyrel, M., Sjöstróm, M., & Lestander, T. A. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.05.007 · Cited by 119
Ahn, B. J., Chang, H.-S., Lee, S. M., Choi, D. H., Cho, S. T., Han, G.-S., & Yang, I. (2013) · Renewable Energy · doi:10.1016/j.renene.2013.06.038 · Cited by 104
A comparative study of quality properties of pelletized agricultural and forestry lopping residues
Zamorano, M., Popov, V., Rodríguez, M. L., & García-Maraver, Á. (2011) · Renewable Energy · doi:10.1016/j.renene.2011.03.020 · Cited by 101
Ranking of biomass pellets by integration of economic, environmental and technical factors
Sultana, A., & Kumar, A. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.01.027 · Cited by 97
Miscanthus combustion properties and variations with Miscanthus agronomy
Baxter, X. C., Darvell, L. I., Jones, J. M., Barraclough, T. J. P., Yates, N. E., & Shield, I. F. (2013) · Fuel · doi:10.1016/j.fuel.2013.09.003 · Cited by 93
Self-citationEffect of pelletizing conditions on combustion behaviour of single wood pellet
Biswas, A. K., Rudolfsson, M., Broström, M., et al. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.12.070 · Cited by 88
Heating values of the above ground biomass of small-sized trees
Nurmi, J. (1993) · Acta Forestalia Fennica · doi:10.14214/aff.7682 · Cited by 86
Drying and storage of forest residues for energy production
Thörnqvist, T. (1985) · Biomass · doi:10.1016/0144-4565(85)90038-1 · Cited by 84
Reasons for slagging during stemwood pellet combustion and some measures for prevention
Öhman, M. C., Nordin, A., Hedman, H., & Jirjis, R. (2004) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2003.08.017 · Cited by 79
Nielsen, N. P. K., Holm, J. K., & Felby, C. (2009) · Energy & Fuels · doi:10.1021/ef800923v · Cited by 78
Lee, S. M., Ahn, B. J., Choi, D. H., Han, G.-S., Jeong, H., Ahn, S.-H., & Yang, I. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.10.015 · Cited by 73
Densification of biomass using a pilot scale flat ring roller pellet mill
Jackson, J., Turner, A., Mark, T., & Montross, M. D. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.02.024 · Cited by 73
Kirsten, C., Lenz, V., Schröder, H., & Repke, J. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.02.013 · Cited by 70
Additives in wood pellet produciton - A pilot-scale study of binding agent usage
Kuokkanen, M., Vilppo, T., Kuokkanen, T., Stoor, T., & Niinimäki, J. (2011) · BioResources · doi:10.15376/biores.6.4.4331-4355 · Cited by 63
Effect of miscanthus addition and different grinding processes on the quality of wood pellets
Lehmann, B., Schröder, H., Wollenberg, R., & Repke, J. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.05.009 · Cited by 59
Temperature patterns in large scale wood pellet silo storage
Larsson, S. H., Lestander, T. A., Crompton, D., Melin, S., & Sokhansanj, S. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.11.012 · Cited by 59
Life cycle assessment of densified wheat straw pellets in the Canadian Prairies
Li, X., Mupondwa, E., Panigrahi, S., Tabil, L. G., & Adapa, P. K. (2012) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-011-0374-7 · Cited by 51
Krajnc, N. (2015) · Cited by 51
Steam explosion of biomass to produce durable wood pellets
Lam, P. S. (2011) · cIRcle (University of British Columbia) · doi:10.14288/1.0059133 · Cited by 48
Hygroscopic properties of densified softwood pellets
Hartley, I. D., & Wood, L. J. (2007) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2007.06.009 · Cited by 45
Temperature and gas evolution during large scale outside storage of wood chips
Ferrero, F., Malow, M., & Noll, M. (2010) · European Journal of Wood and Wood Products · doi:10.1007/s00107-010-0512-0 · Cited by 44
Development of energy and emission parameters for densified form of lignocellulosic biomass
Sultana, A., & Kumar, A. (2011) · Energy · doi:10.1016/j.energy.2011.02.012 · Cited by 44
Wilson, T. O., McNeal, F. M., Spatari, S., Abler, D. G., & Adler, P. R. (2011) · Environmental Science & Technology · doi:10.1021/es202752b · Cited by 43
Wood pellets in Finland - technology, economy and market
Alakangas, E. A., & Paju, P. (2002) · Cited by 42
Larsson, S. H., & Rudolfsson, M. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.11.086 · Cited by 40
TAR IN BIOMASS PRODUCER GAS. THE ENERGY RESEARCH CENTRE OF THE NETHERLANDS (ECN)
Rabou, L. P. L. M., Zwart, R. W. R., & Vreugdenhil, B. J. (2009) · Cited by 34
IEA Bioenergy Task 40 - Global Wood Pellet Markets Industry and Trade Study
Cocchi, M., Junginger, M., Faaij, A. P. C., Heinimö, J., Bradley, D., Schouwenberg, P.-P., Marchal, D., Thrän, D., Deutmeyer, M., & Nikolaisen, L. (2012) · ETA Florence · doi:10.5071/20theubce2012-5bo.3.4 · Cited by 32
Algal Biomass as a Binding Agent for the Densification of Miscanthus
Thapa, S., Johnson, D. B., Liu, P. P., & Canam, T. (2014) · Waste and Biomass Valorization · doi:10.1007/s12649-014-9326-3 · Cited by 21
Moon, Y.-H., Yang, J., Koo, B.-C., An, J.-W., Cha, Y., Youn, Y.-M., Yu, G.-D., An, G. H., Park, K.-G., & Choi, I.-H. (2014) · BioResources · doi:10.15376/biores.9.2.3334-3346 · Cited by 21
Ståhl, M., Berghel, J., & Williams, H. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.06.031 · Cited by 18
Global Woody Biomass Trade for Energy
Lamers, P., Marchal, D., Heinimö, J., & Steierer, F. (2013) · Lecture notes in energy · doi:10.1007/978-94-007-6982-3_3 · Cited by 14
Mechanical material properties effect on pelletization
Jezerská, L., Zajonc, O., Jan, V., & Zegzulka, J. (2016) · Wood Research · Cited by 11
Cited by
Production and utilization of fuel pellets from biomass: A review
Pradhan, P., Mahajani, S. M., & Arora, A. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.09.021 · Cited by 434
Ghodake, G. S., Shinde, S. K., Kadam, A. A., Saratale, R. G., Saratale, G. D., Kumar, M., Palem, R. R., AL-Shwaiman, H. A., Elgorban, A. M., Syed, A., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126645 · Cited by 414
Sarker, T. R., Pattnaik, F., Nanda, S., Dalai, A. K., Meda, V., & Naik, S. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131372 · Cited by 365
A Review of Recent Advances in Spent Coffee Grounds Upcycle Technologies and Practices
Johnson, K., Liu, Y., & Lu, M. (2022) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2022.838605 · Cited by 75
Yang, J., Zhao, T., Cui, X., Peng, M., Wang, X., Mao, H., & Cui, M. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106599 · Cited by 31
Metadata
- Authors
- Whittaker, C., & Shield, I.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2017-05
- Volume
- 71
- Pages
- 1-11
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W2569849357
- Cited by
- 315
- References
- 63
- FWCI
- 20.94
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.