Application and limitations of a H2TiO3 – Diatomaceous earth composite synthesized from titania slag as a selective lithium adsorbent
The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Abstract
The lithium adsorption properties of H2TiO3 synthesized from titania slag and immobilized on diatomaceous earth was investigated. Batch adsorption studies using a LiCl buffered solution (pH = 9.5) shows a maximum adsorption capacity of 27.4 mg/g. Isotherm and kinetic studies indicate that lithium adsorption takes place heterogeneously via a chemisorption mechanism. When tested in a low-grade lithium brine (i.e., The Great Salt Lake, Utah, USA (Li+ ~ 20 mg/L)), the adsorbent composite demonstrated high selectivity towards lithium over magnesium and sodium (selectivity factor >40) with good recyclability at room temperature. However, despite its relatively high adsorption capacity in a buffered solution, the adsorption capacity and the rate of lithium adsorption drastically decreases in brine solution compared to the buffered solution due to the release of H+ ions during ion-exchange. The lithium adsorption capacity decreased with increasing temperature due to the loss of adsorption sites, which is a result of the hydrolysis of metastable H2TiO3 at higher temperatures. This decomposition of the adsorbent is a result of the destabilizing effect of H2TiO3 on DE.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lithium availability and future production outlooks
Vikström, H., Davidsson, S., & Höök, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.005 · Cited by 926
Membrane-based technologies for lithium recovery from water lithium resources: A review
Li, X., Mo, Y., Qing, W., Shao, S., Tang, C. Y., & Li, J. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117317 · Cited by 756
Lithium market research – global supply, future demand and price development
Martin, G., Rentsch, L., Höck, M., & Bertau, M. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.11.004 · Cited by 740
Extraction of lithium with functionalized lithium ion-sieves
Xu, X., Chen, Y., Wan, P., Gasem, K., Wang, K., He, T., Adidharma, H., & Fan, M. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.09.004 · Cited by 536
Choubey, P. K., Kim, M.-S., Srivastava, R. R., Lee, J.-C., & Lee, J.-Y. (2016) · Minerals Engineering · doi:10.1016/j.mineng.2016.01.010 · Cited by 529
Lithium recovery from salt lake brine by H 2 TiO 3
Chitrakar, R., Makita, Y., Ooi, K., & Sonoda, A. (2014) · Dalton Trans. · doi:10.1039/c4dt00467a · Cited by 345
Lithium: sources, production, uses, and recovery outlook
Talens Peiró, L., Villalba Méndez, G., & Ayres, R. U. (2013) · JOM · doi:10.1007/s11837-013-0666-4 · Cited by 318
Paranthaman, M. P., Li, L., Luo, J., Hoke, T., Ucar, H., Moyer, B. A., & Harrison, S. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b03464 · Cited by 293
Swain, B. (2016) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.4976 · Cited by 282
Understanding the future of lithium: part 1, resource model
Ambrose, H., & Kendall, A. (2020) · Journal of Industrial Ecology · doi:10.1111/jiec.12949 · Cited by 213
Review on the Electrochemical Extraction of Lithium from Seawater/Brine
Zhao, X., Yang, H., Wang, Y., & Sha, Z. (2019) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2019.113389 · Cited by 199
Recent advances on electrodialysis for the recovery of lithium from primary and secondary resources
Gmar, S., & Chagnes, A. (2019) · Hydrometallurgy · doi:10.1016/j.hydromet.2019.105124 · Cited by 138
Ambrose, H., & Kendall, A. (2020) · Journal of Industrial Ecology · doi:10.1111/jiec.12942 · Cited by 111
Computational Discovery of Li-M-O Ion Exchange Materials for Lithium Extraction from Brines
Snydacker, D. H., Hegde, V. I., Aykol, M., & Wolverton, C. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03509 · Cited by 39
Cited by
Environmental impact of direct lithium extraction from brines
Vera, M. L., Torres, W. R., Galli, C. I., Chagnes, A., & Flexer, V. (2023) · Nature Reviews Earth & Environment · doi:10.1038/s43017-022-00387-5 · Cited by 766
Lithium recovery from brine: Recent developments and challenges
Khalil, A., Mohammed, S., Hashaikeh, R., & Hilal, N. (2022) · Desalination · doi:10.1016/j.desal.2022.115611 · Cited by 396
Direct lithium extraction: A new paradigm for lithium production and resource utilization
Farahbakhsh, J., Arshadi, F., Mofidi, Z., Mohseni-Dargah, M., Kök, C., Assefi, M., Soozanipour, A., Zargar, M., Asadnia, M., Boroumand, Y., et al. (2024) · Desalination · doi:10.1016/j.desal.2023.117249 · Cited by 260
On the Structure and Lithium Adsorption Mechanism of Layered H 2 TiO 3
Marthi, R., Asgar, H., Gadikota, G., & Smith, Y. R. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c20691 · Cited by 170
Self-citationNikkhah, H., Ipekçi, D., Xiang, W., Stoll, Z., Xu, P., Li, B., McCutcheon, J. R., & Beykal, B. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155349 · Cited by 154
Metadata
- Authors
- Marthi, R., & Smith, Y. R.
- Venue
- Separation and Purification Technology
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 254
- Pages
- 117580
- ISSN
- 1383-5866 (ISSN-L)
- OpenAlex
- W3049553363
- Cited by
- 68
- References
- 14
- FWCI
- 3.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.