The DOI matches its Crossref record; 159 of the 159 references it cites were found in a registry or an index.
Signal based condition monitoring techniques for fault detection and diagnosis of induction motors: A state-of-the-art review
Abstract
Abstract Uninterrupted and trouble-free operation of induction motors (IMs) is the compulsion of the modern industries. Firstly, the paper reviews the conventional time and spectrum signal analyses of two most effective type of signals, i.e. the vibration and the current for various IM faults. The vibration and the current signal analyses (time and spectral) is performed using the signals measured from different faulty IMs from a laboratory setup. Subsequently, the advantages and difficulties associated with these conventional procedures are discussed. Next, this paper presents and summarizes the existing research and development in the field of signal based automation of condition monitoring methodologies for the fault detection and diagnosis of various electrical and mechanical faults of IMs. Nowadays, artificial intelligent (AI) methods are being employed for the IM and other machine fault diagnosis. Advancements of the AI based fault diagnosis including the popular approaches are reviewed in details. These techniques are being integrated with traditional monitoring techniques. The AI based fault monitoring and detection techniques for IMs published up to 2000 are briefly described, however, more attention is paid to the techniques that are introduced in roughly past two decades, i.e. during 2000–2019. In overall, this paper includes review of system signals, conventional and advance signal processing techniques; however, it mainly covers, the selection of effective statistical features, AI methods, and associated training and testing strategies for fault diagnostics of IMs. Finally, dedicated discussions on the recent developments, research gaps and future scopes in the fault monitoring and diagnosis of IMs are added.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Tutorial on Support Vector Machines for Pattern Recognition
Burges, C. J. C. (1998) · Data Mining and Knowledge Discovery · doi:10.1023/a:1009715923555 · Cited by 16,429
A comparison of methods for multiclass support vector machines
Hsu, C.-W., & Lin, C.-J. (2002) · IEEE Transactions on Neural Networks · doi:10.1109/72.991427 · Cited by 6,838
An overview of statistical learning theory
Vapnik, V. N. (1999) · IEEE Transactions on Neural Networks · doi:10.1109/72.788640 · Cited by 6,266
A review on machinery diagnostics and prognostics implementing condition-based maintenance
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.012 · Cited by 4,816
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,382
A new convolutional neural network-based data-driven fault diagnosis method
Wen, L., Li, X., Gao, L., & Zhang, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774777 · Cited by 2,222
Support vector machine in machine condition monitoring and fault diagnosis
Widodo, A., & Yang, B.-S. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.12.007 · Cited by 1,650
A review of induction motors signature analysis as a medium for faults detection
El Hachemi Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,602
Peng, Z. K., & Chu, F. L. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00075-x · Cited by 1,192
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Current Signature Analysis to Detect Induction Motor Faults
Thomson, W. T., & Fenger, M. (2001) · IEEE Industry Applications Magazine · doi:10.1109/2943.930988 · Cited by 1,139
Neural-network-based motor rolling bearing fault diagnosis
Li, B., Chow, M.-Y., Tipsuwan, Y., & Hung, J. C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873214 · Cited by 797
SAMANTA, B., & AL-BALUSHI, K. R. (2003) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2001.1462 · Cited by 760
A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602
A Review of Stator Fault Monitoring Techniques of Induction Motors
Siddique, A., Yadava, G. S., & Singh, B. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.837304 · Cited by 591
Models for Bearing Damage Detection in Induction Motors Using Stator Current Monitoring
Blodt, M., Granjon, P., Raison, B., & Rostaing, G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.917108 · Cited by 568
Wavelet packet feature extraction for vibration monitoring
Yen, G. G., & Lin, K.-C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.847906 · Cited by 545
Noninvasive detection of broken rotor bars in operating induction motors
Kliman, G. B., Koegl, R. A., Stein, J., Endicott, R. D., & Madden, M. W. (1988) · IEEE Transactions on Energy Conversion · doi:10.1109/60.9364 · Cited by 525
A survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Samanta, B. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00020-7 · Cited by 517
Recent developments of induction motor drives fault diagnosis using AI techniques
Filippetti, F., Franceschini, G., Tassoni, C., & Vas, P. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873207 · Cited by 511
Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications
Randall, R. B. (2011) · Cited by 504
Bearing fault detection of induction motor using wavelet and Support Vector Machines (SVMs)
Konar, P., & Chattopadhyay, P. (2011) · Applied Soft Computing · doi:10.1016/j.asoc.2011.03.014 · Cited by 499
Grubic, S., Aller, J. M., Lu, B., & Habetler, T. G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004665 · Cited by 490
What stator current processing-based technique to use for induction motor rotor faults diagnosis?
Benbouzid, M. E. H., & Kliman, G. B. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.811741 · Cited by 485
Quantitative evaluation of induction motor broken bars by means of electrical signature analysis
Bellini, A., Filippetti, F., Franceschini, G., Tassoni, C., & Kliman, G. B. (2001) · IEEE Transactions on Industry Applications · doi:10.1109/28.952499 · Cited by 483
Prognostics and Health Management: A Review of Vibration Based Bearing and Gear Health Indicators
Wang, D., Tsui, K.-L., & Miao, Q. (2018) · IEEE Access · doi:10.1109/access.2017.2774261 · Cited by 455
Fault diagnosis of rotating machinery based on improved wavelet package transform and SVMs ensemble
Hu, Q., He, Z., Zhang, Z., & Zi, Y. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.01.007 · Cited by 400
Detection and location of interturn short circuits in the stator windings of operating motors
Penman, J., Sedding, H. G., Lloyd, B. A., & Fink, W. T. (1994) · IEEE Transactions on Energy Conversion · doi:10.1109/60.368345 · Cited by 394
Immovilli, F., Bellini, A., Rubini, R., & Tassoni, C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049623 · Cited by 382
Benbouzid, M. E. H., Vieira, M., & Theys, C. (1999) · IEEE Transactions on Power Electronics · doi:10.1109/63.737588 · Cited by 378
JACK, L. B., & NANDI, A. K. (2002) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2001.1454 · Cited by 376
Glowacz, A., Glowacz, W., Glowacz, Z., & Kozik, J. (2018) · Measurement · doi:10.1016/j.measurement.2017.08.036 · Cited by 374
Induction machine drive condition monitoring and diagnostic research—a survey
Singh, G. K., & Ahmed Saleh Al Kazzaz, S. (2003) · Electric Power Systems Research · doi:10.1016/s0378-7796(02)00172-4 · Cited by 362
Henao, H., Demian, C., & Capolino, G.-A. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.816531 · Cited by 361
Saravanan, N., & Ramachandran, K. I. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2009.11.006 · Cited by 324
Fault diagnosis of ball bearings using continuous wavelet transform
Kankar, P. K., Sharma, S. C., & Harsha, S. P. (2011) · Applied Soft Computing · doi:10.1016/j.asoc.2010.08.011 · Cited by 313
Widodo, A., Yang, B.-S., & Han, T. (2007) · Expert Systems with Applications · doi:10.1016/j.eswa.2005.11.031 · Cited by 296
Widodo, A., & Yang, B.-S. (2007) · Expert Systems with Applications · doi:10.1016/j.eswa.2006.04.020 · Cited by 292
Puche-Panadero, R., Pineda-Sanchez, M., Riera-Guasp, M., Roger-Folch, J., Hurtado-Perez, E., & Perez-Cruz, J. (2009) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2008.2003207 · Cited by 288
Liu, Z., Cao, H., Chen, X., He, Z., & Shen, Z. (2013) · Neurocomputing · doi:10.1016/j.neucom.2012.07.019 · Cited by 277
Induction Machine Condition Monitoring Using Neural Network Modeling
Su, H., & Chong, K. T. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888786 · Cited by 271
Vibration analysis for bearing fault detection and classification using an intelligent filter
Zarei, J., Tajeddini, M. A., & Karimi, H. R. (2014) · Mechatronics · doi:10.1016/j.mechatronics.2014.01.003 · Cited by 269
da Silva, A. M., Povinelli, R. J., & Demerdash, N. A. O. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.909060 · Cited by 266
Methodology for fault detection in induction motors via sound and vibration signals
Delgado-Arredondo, P. A., Morinigo-Sotelo, D., Osornio-Rios, R. A., Avina-Cervantes, J. G., Rostro-Gonzalez, H., & Romero-Troncoso, R. D. J. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.06.032 · Cited by 266
Soualhi, A., Clerc, G., & Razik, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2230598 · Cited by 264
An unsupervised, on-line system for induction motor fault detection using stator current monitoring
Schoen, R. R., Lin, B. K., Habetler, T. G., Schlag, J. H., & Farag, S. (2002) · Proceedings of 1994 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1994.345492 · Cited by 264
Ballal, M. S., Khan, Z. J., Suryawanshi, H. M., & Sonolikar, R. L. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888789 · Cited by 251
Nejjari, H., & Benbouzid, M. E. H. (2000) · IEEE Transactions on Industry Applications · doi:10.1109/28.845047 · Cited by 247
Diagnosis of the three-phase induction motor using thermal imaging
Glowacz, A., & Glowacz, Z. (2017) · Infrared Physics & Technology · doi:10.1016/j.infrared.2016.12.003 · Cited by 239
An unsupervised, on-line system for induction motor fault detection using stator current monitoring
Schoen, R. R., Lin, B. K., Habetler, T. G., Schlag, J. H., & Farag, S. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475698 · Cited by 239
Garcia-Perez, A., Romero-Troncoso, R. D. J., Cabal-Yepez, E., & Osornio-Rios, R. A. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2051398 · Cited by 235
Fault diagnosis of induction motor based on decision trees and adaptive neuro-fuzzy inference
Tran, V. T., Yang, B.-S., Oh, M.-S., & Tan, A. C. C. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.12.010 · Cited by 224
Yang, B.-S., & Kim, K. J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.10.010 · Cited by 221
Application of AI tools in fault diagnosis of electrical machines and drives-an overview
Awadallah, M. A., & Morcos, M. M. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.811739 · Cited by 220
Martins, J. F., Pires, V. F., & Pires, A. J. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888790 · Cited by 219
Monitoring of defects in induction motors through air-gap torque observation
Hsu, J. S. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.464514 · Cited by 217
Rotor fault condition monitoring techniques for squirrel-cage induction machine—A review
Mehrjou, M. R., Mariun, N., Hamiruce Marhaban, M., & Misron, N. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.05.007 · Cited by 215
Induction motor fault diagnosis based on neuropredictors and wavelet signal processing
Kim, K., & Parlos, A. G. (2002) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2002.1011258 · Cited by 212
Current signature analysis of induction motor mechanical faults by wavelet packet decomposition
Ye, Z., Wu, B., & Sadeghian, A. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.819682 · Cited by 193
Acoustic based fault diagnosis of three-phase induction motor
Glowacz, A. (2018) · Applied Acoustics · doi:10.1016/j.apacoust.2018.03.010 · Cited by 189
Seera, M., Lim, C. P., Ishak, D., & Singh, H. (2012) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2011.2178443 · Cited by 185
Induction motor stator faults diagnosis by a current concordia pattern-based fuzzy decision system
Zidani, F., El Hachemi Benbouzid, M., Diallo, D., & Nait-Said, M. S. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.815832 · Cited by 183
Ayhan, B., Chow, M.-Y., & Song, M.-H. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.878301 · Cited by 182
Bearing Fault Model for Induction Motor With Externally Induced Vibration
Immovilli, F., Bianchini, C., Cocconcelli, M., Bellini, A., & Rubini, R. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2213566 · Cited by 181
Zhu, K., Song, X., & Xue, D. (2014) · Measurement · doi:10.1016/j.measurement.2013.09.019 · Cited by 178
Fuzzy inference systems implemented on neural architectures for motor fault detection and diagnosis
Altug, S., Chen, M.-Y., & Trussell, H. J. (1999) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.807988 · Cited by 172
A New Algorithm for Transient Motor Current Signature Analysis Using Wavelets
Douglas, H., Pillay, P., & Ziarani, A. K. (2004) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.834130 · Cited by 171
Neural networks application for induction motor faults diagnosis
Kowalski, C. T., & Orlowska-Kowalska, T. (2003) · Mathematics and Computers in Simulation · doi:10.1016/s0378-4754(03)00087-9 · Cited by 165
Cheng, F., Qu, L., & Qiao, W. (2018) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2017.2719626 · Cited by 161
Multisensor Wireless System for Eccentricity and Bearing Fault Detection in Induction Motors
Esfahani, E. T., Wang, S., & Sundararajan, V. (2014) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2013.2260865 · Cited by 160
Sadeghian, A., Ye, Z., & Wu, B. (2009) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2009.2013743 · Cited by 160
Liu, Y., & Bazzi, A. M. (2017) · ISA Transactions · doi:10.1016/j.isatra.2017.06.001 · Cited by 159
Effect of number of features on classification of roller bearing faults using SVM and PSVM
Sugumaran, V., & Ramachandran, K. I. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.09.072 · Cited by 157
Gangsar, P., & Tiwari, R. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.03.016 · Cited by 152
Self-citationA neural network approach to real-time condition monitoring of induction motors
Chow, M., Mangum, P. M., & Yee, S. O. (1991) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.107100 · Cited by 151
Widodo, A., & Yang, B. (2007) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.06.018 · Cited by 150
Cascade Neural-Network-Based Fault Classifier for Three-Phase Induction Motor
Ghate, V. N., & Dudul, S. V. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2053337 · Cited by 149
SVM practical industrial application for mechanical faults diagnostic
Baccarini, L. M. R., Silva, V. V. R. E., de Menezes, B. R., & Caminhas, W. M. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.12.017 · Cited by 147
Thomson, W. T. (2002) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2001.939425 · Cited by 141
Keskes, H., Braham, A., & Lachiri, Z. (2013) · Electric Power Systems Research · doi:10.1016/j.epsr.2012.12.013 · Cited by 136
Bazan, G. H., Scalassara, P. R., Endo, W., Goedtel, A., Godoy, W. F., & Palácios, R. H. C. (2016) · Electric Power Systems Research · doi:10.1016/j.epsr.2016.09.031 · Cited by 135
Detection of Induction Motor Faults: A Comparison of Stator Current, Vibration and Acoustic Methods
Li, W., & Mechefske, C. K. (2006) · Journal of Vibration and Control · doi:10.1177/1077546306062097 · Cited by 133
Li, N., Zhou, R., Hu, Q., & Liu, X. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.10.016 · Cited by 133
Palácios, R. H. C., da Silva, I. N., Goedtel, A., & Godoy, W. F. (2015) · Electric Power Systems Research · doi:10.1016/j.epsr.2015.06.008 · Cited by 132
Zhou, H., Chen, J., Dong, G., & Wang, R. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.11.022 · Cited by 131
A review on induction motor online fault diagnosis
Ye, Z., & Wu, B. (2002) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/ipemc.2000.883050 · Cited by 127
Integration of ART-Kohonen neural network and case-based reasoning for intelligent fault diagnosis
Yang, B., Han, T., & Kim, Y. (2003) · Expert Systems with Applications · doi:10.1016/j.eswa.2003.09.009 · Cited by 125
Monitoring of induction motor load by neural network techniques
Salles, G., Filippetti, F., Tassoni, C., Crellet, G., & Franceschini, G. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.849047 · Cited by 125
Recursive Undecimated Wavelet Packet Transform and DAG SVM for Induction Motor Diagnosis
Keskes, H., & Braham, A. (2015) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2015.2462315 · Cited by 121
Multi-class fault diagnosis of induction motor using Hilbert and Wavelet Transform
Konar, P., & Chattopadhyay, P. (2015) · Applied Soft Computing · doi:10.1016/j.asoc.2014.11.062 · Cited by 118
A Novel Approach for Broken Bar Fault Diagnosis in Induction Motors Through Torque Monitoring
Gyftakis, K. N., Spyropoulos, D. V., Kappatou, J. C., & Mitronikas, E. D. (2013) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2013.2240683 · Cited by 116
Sugumaran, V., Sabareesh, G. R., & Ramachandran, K. I. (2007) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.06.029 · Cited by 115
Kral, C., Habetler, T. G., & Harley, R. G. (2004) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.830762 · Cited by 114
Detection of broken rotor bar faults in induction motor at low load using neural network
Bessam, B., Menacer, A., Boumehraz, M., & Cherif, H. (2016) · ISA Transactions · doi:10.1016/j.isatra.2016.06.004 · Cited by 113
Siddique, A., Yadava, G. S., & Singh, B. (2003) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2003.1234543 · Cited by 110
Huang, X., Habetler, T. G., & Harley, R. G. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900607 · Cited by 107
Patel, R. K., & Giri, V. K. (2016) · Perspectives in Science · doi:10.1016/j.pisc.2016.04.068 · Cited by 106
Faiz, J., & Ojaghi, M. (2008) · Mechatronics · doi:10.1016/j.mechatronics.2008.07.004 · Cited by 97
Diagnosis Tool for Motor Condition Monitoring
Ilonen, J., Kämäräinen, J., Lindh, T., Ahola, J., Kalviainen, H. A., & Partanen, J. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.851001 · Cited by 97
DETECTION OF ROLLER BEARING DEFECTS USING EXPERT SYSTEM AND FUZZY LOGIC
Liu, T. I., Singonahalli, J. H., & Iyer, N. (1996) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1996.0041 · Cited by 94
Application of partial discharge testing to motor and generator stator winding maintenance
Stone, G. C., Sedding, H. G., & Costello, M. J. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.491498 · Cited by 93
Monitoring generators and large motors
Tavner, P. J., Gaydon, B. G., & Ward, D. M. (1986) · IEE Proceedings B Electric Power Applications · doi:10.1049/ip-b.1986.0024 · Cited by 91
Online condition monitoring of induction motors
Trutt, F. C., Sottile, J., & Kohler, J. L. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.804758 · Cited by 91
Daviu, J. A. A., Jover, P., Riera‐Guasp, M., Arkkio, A., & Roger-Folch, J. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2007.01.008 · Cited by 89
Fault detection using transient machine signals
Timusk, M. A., Lipsett, M., & Mechefske, C. K. (2008) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.01.013 · Cited by 89
OBJECTIVE MACHINERY FAULT DIAGNOSIS USING FUZZY LOGIC
Mechefske, C. K. (1998) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1998.0173 · Cited by 87
Culbert, I., & Rhodes, W. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.889915 · Cited by 86
Gangsar, P., & Tiwari, R. (2018) · Measurement · doi:10.1016/j.measurement.2018.12.011 · Cited by 82
Self-citationBordoloi, D. J., & Tiwari, R. (2014) · Measurement · doi:10.1016/j.measurement.2014.04.024 · Cited by 81
Self-citationStator Short-Circuit Diagnosis in Induction Motors Using Mutual Information and Intelligent Systems
Bazan, G. H., Scalassara, P. R., Endo, W., Goedtel, A., Palácios, R. H. C., & Godoy, W. F. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2840983 · Cited by 81
Non-stationary signal processing for bearing health monitoring
Gao, R. X., & Yan, R. (2006) · International Journal of Manufacturing Research · doi:10.1504/ijmr.2006.010701 · Cited by 77
Singh, G. K., & Ahmed, S. (2003) · Electric Power Systems Research · doi:10.1016/s0378-7796(03)00154-8 · Cited by 75
Fault diagnosis of rotating machine by thermography method on support vector machine
Lim, G.-M., Bae, D.-M., & Kim, J. (2014) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-014-0701-6 · Cited by 75
Online Motor Fault Detection and Diagnosis Using a Hybrid FMM-CART Model
Seera, M., & Lim, C. P. (2013) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2013.2280280 · Cited by 75
A Generic Neurofuzzy Model-Based Approach for Detecting Faults in Induction Motors
Tan, W. W., & Huo, H. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855654 · Cited by 75
Three phase induction machines asymmetrical faults identification using bispectrum
Chow, T. W. S., & Fei, G. (1995) · IEEE Transactions on Energy Conversion · doi:10.1109/60.475840 · Cited by 74
Fault Diagnosis System for Rotary Machine Based on Fuzzy Neural Networks
Zhang, S., ASAKURA, T., Xu, X., & Xu, B. (2003) · JSME International Journal Series C · doi:10.1299/jsmec.46.1035 · Cited by 72
Bacha, K., Salem, S. B., & Châari, A. (2012) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2012.06.056 · Cited by 72
Awadallah, M. A., & Morcos, M. M. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.841502 · Cited by 71
Salem, S. B., Bacha, K., & Châari, A. (2012) · ISA Transactions · doi:10.1016/j.isatra.2012.06.002 · Cited by 70
Xian, G., & Zeng, B. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2009.03.063 · Cited by 70
Rapur, J. S., & Tiwari, R. (2019) · Measurement · doi:10.1016/j.measurement.2019.07.037 · Cited by 69
Self-citationHilbert spectrum analysis of induction motors for the detection of incipient broken rotor bars
Rangel‐Magdaleno, J., Barreto, H. P., Ramírez-Cortés, J. M., & Cruz-Vega, I. (2017) · Measurement · doi:10.1016/j.measurement.2017.05.070 · Cited by 68
Seshadrinath, J., Singh, B., & Panigrahi, B. K. (2013) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2283212 · Cited by 64
Support vector machine for fault diagnosis of the broken rotor bars of squirrel-cage induction motor
Kurek, J., & Osowski, S. (2009) · Neural Computing and Applications · doi:10.1007/s00521-009-0316-5 · Cited by 62
Gyftakis, K. N., Cardoso, A. J. M., & Daviu, J. A. A. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.01.046 · Cited by 57
Rapur, J. S., & Tiwari, R. (2018) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-018-0544-7 · Cited by 53
Self-citationGangsar, P., & Tiwari, R. (2018) · Journal of Dynamic Systems Measurement and Control · doi:10.1115/1.4039204 · Cited by 52
Self-citationSasi, A. Y. B., Gu, F., Li, Y., & Ball, A. D. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.010 · Cited by 49
Elbouchikhi, E., Choqueuse, V., & Benbouzid, M. (2016) · ISA Transactions · doi:10.1016/j.isatra.2016.03.007 · Cited by 46
Induction machine model with space harmonics for fault diagnosis based on the convolution theorem
Sapena-Bañó, Á., Martínez‐Román, J., Puche‐Panadero, R., Pineda‐Sanchez, M., Pérez‐Cruz, J., & Riera‐Guasp, M. (2018) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2018.03.001 · Cited by 46
Wu, F., Hao, Y., Zhao, J., & Liu, Y. (2017) · Microelectronics Reliability · doi:10.1016/j.microrel.2017.05.036 · Cited by 42
Kral, C., Pirker, F., & Pascoli, G. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.847316 · Cited by 40
Nested SVDD in DAG SVM for induction motor condition monitoring
Zgarni, S., Keskes, H., & Braham, A. (2018) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2018.02.019 · Cited by 40
Gangsar, P., & Tiwari, R. (2019) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-019-1574-5 · Cited by 40
Self-citationOptimal feature selection using genetic algorithm for mechanical fault detection of induction motor
Nguyen, T. N., Lee, H., & Kwon, J.-M. (2008) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-007-1036-3 · Cited by 36
Monitoring partial discharges on 4 kV motor windings
Tetrault, S. M., Stone, G. C., & Sedding, H. G. (2002) · Record of conference papers/Record of conference papers - Petroleum and Chemical Industry Conference · doi:10.1109/pcicon.1997.648179 · Cited by 34
Lasurt, I., Stronach, A. F., & Penman, J. (2002) · PeachFuzz 2000. 19th International Conference of the North American Fuzzy Information Processing Society - NAFIPS (Cat. No.00TH8500) · doi:10.1109/nafips.2000.877411 · Cited by 30
Induction motor broken rotor bar detection using vibration analysis — A case study
Kanović, Ž., Matić, D., Jeličić, Z. D., Rapaić, M. R., Jakovljević, B. B., & Kapetina, M. (2013) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2013.6645698 · Cited by 29
Detection and Classification of Rolling-Element Bearing Faults using Support Vector Machines
Rojas‐Domínguez, A., & Nandi, A. K. (2006) · Machine learning for signal processing ... · doi:10.1109/mlsp.2005.1532891 · Cited by 29
Feature Extraction using Wavelet Transform for Multi-class Fault Detection of Induction Motor
Chattopadhyay, P., & Konar, P. (2014) · Journal of The Institution of Engineers (India) Series B · doi:10.1007/s40031-014-0076-1 · Cited by 27
Research on SVM Classification Performance in Rolling Bearing Diagnosis
Meng, L., Miao, W., & Chunguang, W. (2010) · International Conference on Intelligent Computation Technology and Automation · doi:10.1109/icicta.2010.747 · Cited by 26
Monitoring partial discharges on 4-kV motor windings
Tetrault, S. M., Stone, G. C., & Sedding, H. G. (1999) · IEEE Transactions on Industry Applications · doi:10.1109/28.767022 · Cited by 26
Gangsar, P., & Tiwari, R. (2014) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-014-9893-4 · Cited by 25
Self-citationA novel approach for fault diagnosis of induction motor with invariant character vectors
Zhou, Z., Zhao, J., & Cao, F. (2014) · Information Sciences · doi:10.1016/j.ins.2014.05.046 · Cited by 25
Vibration and Current Monitoring for Fault's Diagnosis of Induction Motors
Iorgulescu, M., & Beloiu, R. (2008) · Cited by 21
Bandyopadhyay, I., Purkait, P., & Koley, C. (2016) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2016.01.014 · Cited by 20
Rajeswaran, N., Swarupa, M. L., Rao, T. S., & Chetaswi, K. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.11.119 · Cited by 19
Nguyen, T. N., & Lee, H. (2008) · Lecture notes in computer science · doi:10.1007/978-3-540-85984-0_24 · Cited by 18
Gangsar, P., & Tiwari, R. (2016) · Intelligent Industrial Systems · doi:10.1007/s40903-016-0053-x · Cited by 18
Self-citationGangsar, P., & Tiwari, R. (2019) · ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems Part B Mechanical Engineering · doi:10.1115/1.4043268 · Cited by 18
Self-citationRolling element bearing fault diagnosis based on support vector machine
Zheng, H. Y., & Zhou, L. (2012) · International Conference on Consumer Electronics, Communications and Networks (CECNet) · doi:10.1109/cecnet.2012.6201982 · Cited by 17
Han, T., Yang, B., & Lee, J. M. (2005) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2005.195989 · Cited by 17
DAG SVM and Pitch Synchronous Wavelet Transform for Induction Motor diagnosis
Keskes, H., & Braham, A. (2014) · IET International Conference on Power Electronics, Machines and Drives (PEMD) · doi:10.1049/cp.2014.0321 · Cited by 14
Rolling element bearings fault classification based on SVM and feature evaluation
Sui, W., & Zhang, D. (2009) · International Conference on Machine Learning and Cybernetics · doi:10.1109/icmlc.2009.5212574 · Cited by 6
Kaviarasan, M., Tamilselvan, A., & Venugopal, E. (2016) · International Conference on Emerging Trends in Engineering, Technology and Science (ICETETS) · doi:10.1109/icetets.2016.7603099 · Cited by 5
Cited by
Zhang, T., Chen, J., Li, F., Zhang, K., Lv, H., He, S., & Xu, E. (2022) · ISA Transactions · doi:10.1016/j.isatra.2021.02.042 · Cited by 571
Intelligent Mechanical Fault Diagnosis Using Multisensor Fusion and Convolution Neural Network
Xie, T., Huang, X., & Choi, S.-K. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3102017 · Cited by 306
Motor Fault Diagnostics Based on Current Signatures: A Review
Niu, G., Dong, X., & Chen, Y. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3285999 · Cited by 269
Wang, X., Lu, S., Huang, W., Wang, Q., Zhang, S., & Xia, M. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3051668 · Cited by 65
Metadata
- Authors
- Gangsar, P., & Tiwari, R.
- Venue
- Mechanical Systems and Signal Processing
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 144
- Pages
- 106908
- ISSN
- 0888-3270 (ISSN-L)
- OpenAlex
- W3018957240
- Cited by
- 605
- References
- 159
- FWCI
- 35.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.