The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Sustainable Elastomers from Renewable Biomass
Abstract
Sustainable elastomers have undergone explosive growth in recent years, partly due to the resurgence of biobased materials prepared from renewable natural resources. However, mounting challenges still prevail: How can the chemical compositions and macromolecular architectures of sustainable polymers be controlled and broadened? How can their processability and recyclability be enabled? How can they compete with petroleum-based counterparts in both cost and performance? Molecular-biomass-derived polymers, such as polymyrcene, polymenthide, and poly(ε-decalactone), have been employed for constructing thermoplastic elastomers (TPEs). Plant oils are widely used for fabricating thermoset elastomers. We use abundant biomass, such as plant oils, cellulose, rosin acids, and lignin, to develop elastomers covering a wide range of structure-property relationships in the hope of delivering better performance. In this Account, recent progress in preparing monomers and TPEs from biomass is first reviewed. ABA triblock copolymer TPEs were obtained with a soft middle block containing a soybean-oil-based monomer and hard outer blocks containing styrene. In addition, a combination of biobased monomers from rosin acids and soybean oil was formulated to prepare triblock copolymer TPEs. Together with the above-mentioned approaches based on block copolymers, multigraft copolymers with a soft backbone and rigid side chains are recognized as the first-generation and second-generation TPEs, respectively. It has been recently demonstrated that multigraft copolymers with a rigid backbone and elastic side chains can also be used as a novel architecture of TPEs. Natural polymers, such as cellulose and lignin, are utilized as a stiff, macromolecular backbone. Cellulose/lignin graft copolymers with side chains containing a copolymer of methyl methacrylate and butyl acrylate exhibited excellent elastic properties. Cellulose graft copolymers with biomass-derived polymers as side chains were further explored to enhance the overall sustainability. Isoprene polymers were grafted from a cellulosic backbone to afford Cell-g-polyisoprene copolymers. Via cross-linking of these graft copolymers, human-skin-mimic elastomers and high resilient elastomers with a well-defined network structure were achieved. The mechanical properties of these resilient elastomers could be finely controlled by tuning the cellulose content. As isoprene can be produced by engineering of microorganisms, these elastomers could be a renewable alternative to petroleum products. In summary, triblock copolymer and graft copolymer TPEs with biomass components, skin-mimic elastomers, high resilient biobased elastomers, and engineering of macromolecular architectures for elastomers are discussed. These approaches and design provide us knowledge on the potential to make sustainable elastomers for various applications to compete with petroleum-based counterparts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Silica-Like Malleable Materials from Permanent Organic Networks
Montarnal, D., Capelot, M., Tournilhac, F., & Leibler, L. (2011) · Science · doi:10.1126/science.1212648 · Cited by 3,625
Sustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
Self-healing gels based on constitutional dynamic chemistry and their potential applications
Wei, Z., Yang, J. H., Zhou, J., Xu, F., Zrínyi, M., Dussault, P. H., Osada, Y., & Chen, Y. M. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00219a · Cited by 896
Mechanically Activated, Catalyst-Free Polyhydroxyurethane Vitrimers
Fortman, D. J., Brutman, J. P., Cramer, C. J., Hillmyer, M. A., & Dichtel, W. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08084 · Cited by 811
Alternative Monomers Based on Lignocellulose and Their Use for Polymer Production
Delidovich, I., Hausoul, P. J. C., Deng, L., Pfützenreuter, R., Rose, M., & Palkovits, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00354 · Cited by 773
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Hillmyer, M. A., & Tolman, W. B. (2014) · Accounts of Chemical Research · doi:10.1021/ar500121d · Cited by 635
Controlled Polymerization of Next-Generation Renewable Monomers and Beyond
Yao, K., & Tang, C. (2013) · Macromolecules · doi:10.1021/ma3019574 · Cited by 485
Self-citationScalable production of mechanically tunable block polymers from sugar
Xiong, M., Schneiderman, D. K., Bates, F. S., Hillmyer, M. A., & Zhang, K. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1404596111 · Cited by 203
Sustainable thermoplastic elastomers from terpene-derived monomers
Bolton, J. M., Hillmyer, M. A., & Hoye, T. R. (2014) · ACS Macro Letters · doi:10.1021/mz500339h · Cited by 186
Renewable-Resource Thermoplastic Elastomers Based on Polylactide and Polymenthide
Wanamaker, C. L., O'Leary, L. E., Lynd, N. A., Hillmyer, M. A., & Tolman, W. B. (2007) · Biomacromolecules · doi:10.1021/bm700699g · Cited by 183
Research works printed but not linked: 42
- 10.1039/c4py90017k · DOI
- 10.1016/j.progpolymsci.2014.11.002 · DOI · Paper page
- 10.1039/C6NP00112B · DOI
- 10.1016/j.progpolymsci.2015.07.003 · DOI · Paper page
- 10.1021/acs.chemrev.5b00264 · DOI · Paper page
- 10.1002/marc.201200513 · DOI · Paper page
- 10.1039/c2ra21675b · DOI
- 10.1016/S1359-0294(00)00070-4 · DOI · Paper page
- 10.1002/adfm.200901040 · DOI · Paper page
- 10.1039/C4RA09475A · DOI
- 10.1021/acssuschemeng.6b01038 · DOI
- 10.1002/apmc.1994.052230116 · DOI
- 10.1039/b600616g · DOI
- 10.1002/ejlt.201300217 · doi:10.1002/ejlt.201300217
- 10.1039/c3gc40605a · doi:10.1039/c3gc40605a
- 10.1021/acssuschemeng.5b00312 · DOI
- 10.1021/acssuschemeng.6b01890 · DOI
- 10.1021/acs.macromol.5b00091 · DOI
- 10.1039/C6PY00048G · DOI
- 10.1021/ma4011846 · DOI
- 10.1002/macp.201500274 · DOI
- 10.1039/C5GC00822K · DOI
- 10.1021/ma061391q · DOI
- 10.1021/acs.macromol.6b01496 · DOI
- 10.1021/acs.macromol.7b00001 · DOI
- 10.1038/nchem.2023 · DOI · Paper page
- 10.1021/acsmacrolett.5b00843 · DOI
- 10.1021/ja510389m · DOI · Paper page
- 10.1021/jacs.5b13455 · DOI · Paper page
- 10.1021/ma4007472 · DOI
- 10.1021/acs.macromol.6b02033 · DOI
- 10.1021/acsmacrolett.6b00091 · DOI
- 10.1021/ma101071p · DOI
- 10.1039/c3py01260c · DOI
- 10.1039/c3py01574b · DOI
- 10.1002/ange.200600272 · DOI
- 10.1002/pola.24378 · DOI
- 10.1021/nn506960f · DOI
- 10.1021/ma011576r · DOI
- 10.1021/acs.macromol.5b02546 · DOI
- 10.1021/ja010363e · DOI · Paper page
- 10.1039/C6SM02003H · DOI
Cited by
Sustainable polymers from biomass: Bridging chemistry with materials and processing
Wang, Z., Ganewatta, M. S., & Tang, C. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101197 · Cited by 422
Self-citationLiu, J., Wang, S., Peng, Y., Zhu, J., Zhao, W., & Liu, X. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101353 · Cited by 418
Zhang, C., Shen, X., Jin, Y., Cheng, J., Cai, C., & Wang, F. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00664 · Cited by 351
Novel lignin–chitosan–PVA composite hydrogel for wound dressing
Zhang, Y., Jiang, M., Zhang, Y., Cao, Q., Wang, X., Han, Y., Sun, G., Li, Y., & Zhou, J. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.110002 · Cited by 337
Wang, W., Lu, W., Goodwin, A., Wang, H., Yin, P., Kang, N.-G., Hong, K., & Mays, J. W. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.04.002 · Cited by 326
Metadata
- Authors
- Wang, Z., Yuan, L., & Tang, C.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-06-21
- Volume
- 50
- Issue
- 7
- Pages
- 1762-1773
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2715559059
- Cited by
- 234
- References
- 10
- FWCI
- 7.81
- Type
- journal article
- Language
- en
- Open access
- closed
- Funders
- National Natural Science Foundation of China (51603002)
- Division of Materials Research (DMR-1252611)
- United Soybean Board (1540-612-6273)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.