High-Throughput, Automated Protein A Purification Platform with Multiattribute LC–MS Analysis for Advanced Cell Culture Process Monitoring
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The levels of many product related variants observed during the production of monoclonal antibodies are dependent on control of the manufacturing process, especially the cell culture process. However, it is difficult to characterize samples pulled from the bioreactor due to the low levels of product during the early stages of the process and the high levels of interfering reagents. Furthermore, analytical results are often not available for several days, which slows the process development cycle and prevents "real time" adjustments to the manufacturing process. To reduce the delay and enhance our ability to achieve quality targets, we have developed a low-volume, high-throughput, and high-content analytical platform for at-line product quality analysis. This workflow includes an automated, 96-well plate protein A purification step to isolate antibody product from the cell culture fermentation broth, followed by rapid, multiattribute LC-MS analysis. We have demonstrated quantitative correlations between particular process parameters with the levels of glycosylated and glycated species in a series of small scale experiments, but the platform could be used to monitor other attributes and applied across the biopharmaceutical industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Eon‐Duval, A., Broly, H., & Gleixner, R. (2012) · Biotechnology Progress · doi:10.1002/btpr.1548 · Cited by 234
Rogers, R. S., Nightlinger, N. S., Livingston, B., Campbell, P., Bailey, R., & Balland, A. (2015) · mAbs · doi:10.1080/19420862.2015.1069454 · Cited by 231
Advances in process monitoring tools for cell culture bioprocesses
Zhao, L., Fu, H., Zhou, W., & Hu, W. (2015) · Engineering in Life Sciences · doi:10.1002/elsc.201500006 · Cited by 81
Cited by
Wasalathanthri, D. P., Rehmann, M. S., Song, Y., Gu, Y., Mi, L., Shao, C., Chemmalil, L., Lee, J., Ghose, S., Borys, M. C., et al. (2020) · Biotechnology and Bioengineering · doi:10.1002/bit.27461 · Cited by 177
Modern Sensor Tools and Techniques for Monitoring, Controlling, and Improving Cell Culture Processes
Reyes, S. J., Durocher, Y., Pham, P. L., & Henry, O. (2022) · Processes · doi:10.3390/pr10020189 · Cited by 130
Multi‐Attribute Method for Quality Control of Therapeutic Proteins
Rogstad, S., Yan, H., Wang, X., Powers, D., Brorson, K., Damdinsuren, B., & Lee, S. (2019) · Analytical Chemistry · doi:10.1021/acs.analchem.9b03808 · Cited by 123
Toward Biotherapeutic Product Real‐Time Quality Monitoring
Guerra, A., von Stosch, M., & Glassey, J. (2019) · Critical Reviews in Biotechnology · doi:10.1080/07388551.2018.1524362 · Cited by 58
“The same analytical techniques may provide information on several minor PTM quantifications and, therefore, be able to perform multi-attribute monitoring (see “Multi-attribute monitoring” section) [87].”
BackgroundMethodNaumann, L., Schlossbauer, P., Klingler, F., Hesse, F., Otte, K., & Neusüß, C. (2022) · Journal of Separation Science · doi:10.1002/jssc.202100865 · Cited by 18
Metadata
- Authors
- Dong, J., Migliore, N., Mehrman, S. J., Cunningham, J., Lewis, M. J., & Hu, P.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-08-23
- Volume
- 88
- Issue
- 17
- Pages
- 8673-8679
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2480459866
- Cited by
- 45
- References
- 3
- FWCI
- 1.50
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.