Effects of Irgacure 2959 and lithium phenyl-2,4,6-trimethylbenzoylphosphinate on cell viability, physical properties, and microstructure in 3D bioprinting of vascular-like constructs
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Photocrosslinkable polymers such as gelatin methacrylate (GelMA) have various 3D bioprinting applications. These polymers crosslink upon exposure to UV irradiation with the existence of an appropriate photoinitiator. Two photoinitiators, Irgacure 2959 and lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) are commonly used. This study systematically investigates the effects of photoinitiator types on the cell viability, physical properties, and microstructure in 3D bioprinting of GelMA-based cellular constructs. The main conclusions are: (1) during the 3D bioprinting, the cell viability generally decreases as the photoinitiator concentration and printing time increase using both Irgacure 2959 and LAP. At the low photoinitiator concentrations (such as 0.3% and 0.5% (w/v)), the overall cell viability is good within the printing time of 60 min using both Irgacure 2959 and LAP. However, at the high photoinitiator concentrations (such as 0.7% and 0.9% (w/v)), the overall cell viability using LAP is much higher than that using Irgacure 2959 within the printing time of 60 min; (2) after the 3D bioprinting, the photoinitiator types, either Irgacure 2959 or LAP, have negligible effects on the post-printing cell viability after crosslinking; (3) after the 3D bioprinting, GelMA samples cured with Irgacure 2959 have slightly larger pore size, faster degradation rate, and greater swelling ratio compared to those cured with LAP; (4) 3D GelMA-based vascular-like constructs have been fabricated using dynamic optical projection stereolithography, and the measured dimensions have been compared with the designed dimensions showing good shape fidelity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Handheld co-axial bioprinting: application to in situ surgical cartilage repair
Duchi, S., Onofrillo, C., O’Connell, C. D., Blanchard, R., Augustine, C., Quigley, A. F., Kapsa, R. M. I., Pivonka, P., Wallace, G., Di Bella, C., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-05699-x · Cited by 219
Cited by
3D bioprinted silk fibroin hydrogels for tissue engineering
Kim, S. H., Hong, H., Ajiteru, O., Sultan, M. T., Lee, Y. J., Lee, J. S., Lee, O. J., Lee, H., Park, H. S., Choi, K. Y., et al. (2021) · Nature Protocols · doi:10.1038/s41596-021-00622-1 · Cited by 294
Gelatin methacryloyl hydrogel, from standardization, performance, to biomedical application
He, J., Sun, Y., Gao, Q., He, C., Yao, K., Wang, T., Xie, M., Yu, K., Nie, J., Chen, Y., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300395 · Cited by 275
In Vitro Strategies to Vascularize 3D Physiologically Relevant Models
Dellaquila, A., Le Bao, C., Letourneur, D., & Simon‐Yarza, T. (2021) · Advanced Science · doi:10.1002/advs.202100798 · Cited by 115
Ali, S. M., Patrawalla, N. Y., Kajave, N. S., Brown, A. B., & Kishore, V. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c00985 · Cited by 26
Metadata
- Authors
- Xu, H., Casillas, J., Krishnamoorthy, S., & Xu, C.
- Venue
- Biomedical Materials
- Publisher
- IOP Publishing
- Published
- 2020-07-28
- Volume
- 15
- Issue
- 5
- Pages
- 055021
- ISSN
- 1748-6041 (ISSN-L)
- 1748-605X
- OpenAlex
- W3026101608
- Cited by
- 196
- References
- 7
- FWCI
- 4.72
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effects of Irgacure 2959 and lithium phenyl-2,4,6-trimethylbenzoylphosphinate on cell viability, physical properties, and microstructure in 3D bioprinting of vascular-like constructs. https://app.cochat.ai/papers/10.1088/1748-605x/ab954e
- The paper
- Xu, H., Casillas, J., Krishnamoorthy, S., & Xu, C. (2020). Effects of Irgacure 2959 and lithium phenyl-2,4,6-trimethylbenzoylphosphinate on cell viability, physical properties, and microstructure in 3D bioprinting of vascular-like constructs. Biomedical Materials. https://doi.org/10.1088/1748-605x/ab954e
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.