The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Composite Bioprinted Hydrogels Containing Porous Polymer Microparticles Provide Tailorable Mechanical Properties for 3D Cell Culture
Abstract
The mechanical and architectural properties of the three-dimensional (3D) tissue microenvironment can have large impacts on cellular behavior and phenotype, providing cells with specialized functions dependent on their location. This is especially apparent in macrophage biology where the function of tissue resident macrophages is highly specialized to their location. 3D bioprinting provides a convenient method of fabricating biomaterials that mimic specific tissue architectures. If these printable materials also possess tunable mechanical properties, they would be highly attractive for the study of macrophage behavior in different tissues. Currently, it is difficult to achieve mechanical tunability without sacrificing printability, scaffold porosity, and a loss in cell viability. Here, we have designed composite printable biomaterials composed of traditional hydrogels [nanofibrillar cellulose (cellulose) or methacrylated gelatin (gelMA)] mixed with porous polymeric high internal phase emulsion (polyHIPE) microparticles. By varying the ratio of polyHIPEs to hydrogel, we fabricate composite hydrogels that mimic the mechanical properties of the neural tissue (0.1-0.5 kPa), liver (1 kPa), lungs (5 kPa), and skin (10 kPa) while maintaining good levels of biocompatibility to a macrophage cell line.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Tissue-resident macrophages originate from yolk-sac-derived erythro-myeloid progenitors
Gomez Perdiguero, E., Klapproth, K., Schulz, C., Busch, K., Azzoni, E., Crozet, L., Garner, H., Trouillet, C., de Bruijn, M. F., Geissmann, F., et al. (2015) · Nature · doi:10.1038/nature13989 · Cited by 2,339
Tissue-Resident Macrophage Enhancer Landscapes Are Shaped by the Local Microenvironment
Lavin, Y., Winter, D., Blecher-Gonen, R., David, E., Keren-Shaul, H., Merad, M., Jung, S., & Amit, I. (2014) · Cell · doi:10.1016/j.cell.2014.11.018 · Cited by 2,167
A practical guide to hydrogels for cell culture
Caliari, S. R., & Burdick, J. A. (2016) · Nature Methods · doi:10.1038/nmeth.3839 · Cited by 2,075
Nuclear Lamin-A Scales with Tissue Stiffness and Enhances Matrix-Directed Differentiation
Swift, J., Ivanovska, I. L., Buxboim, A., Harada, T., Dingal, P. C. D. P., Pinter, J., Pajerowski, J. D., Spinler, K. R., Shin, J.-W., Tewari, M., et al. (2013) · Science · doi:10.1126/science.1240104 · Cited by 1,991
Mechanical forces direct stem cell behaviour in development and regeneration
Vining, K. H., & Mooney, D. J. (2017) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm.2017.108 · Cited by 1,656
Controlling the Porosity and Microarchitecture of Hydrogels for Tissue Engineering
Annabi, N., Nichol, J. W., Zhong, X., Ji, C., Koshy, S., Khademhosseini, A., & Dehghani, F. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0639 · Cited by 1,308
3D Bioprinting for Tissue and Organ Fabrication
Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh-Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 682
Li, Y., Xiao, Y., & Liu, C. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00654 · Cited by 598
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Nicolas, J., Magli, S., Rabbachin, L., Sampaolesi, S., Nicotra, F., & Russo, L. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00045 · Cited by 509
Developmental origin, functional maintenance and genetic rescue of osteoclasts
Jacome-Galarza, C. E., Percin, G. I., Muller, J. T., Mass, E., Lazarov, T., Eitler, J., Rauner, M., Yadav, V. K., Crozet, L., Bohm, M., et al. (2019) · Nature · doi:10.1038/s41586-019-1105-7 · Cited by 475
Does niche competition determine the origin of tissue-resident macrophages?
Guilliams, M., & Scott, C. L. (2017) · Nature Reviews Immunology · doi:10.1038/nri.2017.42 · Cited by 409
Chen, D. T. N., Wen, Q., Janmey, P. A., Crocker, J. C., & Yodh, A. G. (2010) · Annual Review of Condensed Matter Physics · doi:10.1146/annurev-conmatphys-070909-104120 · Cited by 398
The effect of matrix stiffness on mesenchymal stem cell differentiation in a 3D thixotropic gel
Pek, Y. S., Wan, A. C. A., & Ying, J. Y. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.057 · Cited by 384
Mechanism of regulation of stem cell differentiation by matrix stiffness
Lv, H., Li, L., Sun, M., Zhang, Y., Chen, L., Rong, Y., & Li, Y. (2015) · Stem Cell Research & Therapy · doi:10.1186/s13287-015-0083-4 · Cited by 381
Patrolling Alveolar Macrophages Conceal Bacteria from the Immune System to Maintain Homeostasis
Neupane, A. S., Willson, M., Chojnacki, A. K., Vargas E Silva Castanheira, F., Morehouse, C., Carestia, A., Keller, A. E., Peiseler, M., DiGiandomenico, A., Kelly, M. M., et al. (2020) · Cell · doi:10.1016/j.cell.2020.08.020 · Cited by 348
Extrusion bioprinting: Recent progress, challenges, and future opportunities
Ramesh, S., Harrysson, O. L. A., Rao, P. K., Tamayol, A., Cormier, D. R., Zhang, Y., & Rivero, I. V. (2021) · Bioprinting · doi:10.1016/j.bprint.2020.e00116 · Cited by 243
Influence of Crosslink Density and Stiffness on Mechanical Properties of Type I Collagen Gel
Lin, S., & Gu, L. (2015) · Materials · doi:10.3390/ma8020551 · Cited by 147
A porous photocurable elastomer for cell encapsulation and culture
Gerecht, S., Townsend, S. A., Pressler, H. M., Zhu, H., Nijst, C. L. E., Bruggeman, J. P., Nichol, J. W., & Langer, R. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.07.039 · Cited by 121
Bertassoni, L. E. (2021) · Advanced Materials · doi:10.1002/adma.202101321 · Cited by 103
Porous Polymers from High Internal Phase Emulsions as Scaffolds for Biological Applications
Kramer, S., Cameron, N. R., & Krajnc, P. (2021) · Polymers · doi:10.3390/polym13111786 · Cited by 99
Self-citationDikici, B. A., Malayeri, A., Sherborne, C., Dıkıcı, S., Paterson, T. E., Dew, L., Hatton, P. V., Asencio, Í. O., MacNeil, S., Langford, C., et al. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.1c01129 · Cited by 68
Self-citationReynolds, N. P., Styan, K. E., Easton, C. D., Li, Y., Waddington, L. J., Lara, C., Forsythe, J. S., Mezzenga, R., Hartley, P. G., & Muir, B. W. (2013) · Biomacromolecules · doi:10.1021/bm400430t · Cited by 65
Self-citationSherborne, C., Owen, R., Reilly, G. C., & Claeyssens, F. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.061 · Cited by 55
Porous PolyHIPE microspheres for protein delivery from an injectable bone graft
Whitely, M. E., Rodriguez‐Rivera, G. J., Waldron, C. J., Mohiuddin, S., Cereceres, S., Sears, N. A., Ray, N., & Cosgriff‐Hernandez, E. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.044 · Cited by 52
Porous microspheres support mesenchymal progenitor cell ingrowth and stimulate angiogenesis
Paterson, T. E., Gigliobianco, G., Sherborne, C., Green, N. H., Dugan, J. M., MacNeil, S., Reilly, G. C., & Claeyssens, F. (2018) · APL Bioengineering · doi:10.1063/1.5008556 · Cited by 50
Murphy, A. R., Ghobrial, I. M., Jamshidi, P., Laslett, A. L., O’Brien, C., & Cameron, N. R. (2017) · Polymer Chemistry · doi:10.1039/c7py01375b · Cited by 48
Self-citationZaguri, D., Shaham‐Niv, S., Chakraborty, P., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c01574 · Cited by 43
Self-citationSolvent‐Free Fabrication of polyHIPE Microspheres for Controlled Release of Growth Factors
Moglia, R. S., Whitely, M. E., Brooks, M., et al. (2014) · Macromolecular Rapid Communications · doi:10.1002/marc.201400145 · Cited by 41
Biomimetic Topography and Chemistry Control Cell Attachment to Amyloid Fibrils
Reynolds, N. P., Charnley, M., Bongiovanni, M. N., Hartley, P. G., & Gras, S. L. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00114 · Cited by 38
Self-citationDurgut, E., Sherborne, C., Dikici, B. A., et al. (2022) · Langmuir · doi:10.1021/acs.langmuir.2c01243 · Cited by 30
Ratcliffe, J. L., Walker, M., Eissa, A. M., Du, S., Przyborski, S. A., Laslett, A. L., & Cameron, N. R. (2019) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.29353 · Cited by 24
Self-citationChitosan-coated amyloid fibrils increase adipogenesis of mesenchymal stem cells
Gilbert, J., Reynolds, N. P., Russell, S. M., Haylock, D. N., McArthur, S. L., Charnley, M., & Jones, O. G. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.05.050 · Cited by 21
Self-citationDiba, F. S., Reynolds, N. P., Thissen, H. W., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904262 · Cited by 21
Self-citationTowards using 3D cellular cultures to model the activation and diverse functions of macrophages
Cutter, S. W., Wright, M. D., Reynolds, N. P., & Binger, K. J. (2023) · Biochemical Society Transactions · doi:10.1042/bst20221008 · Cited by 13
Self-citationEvans, C. W., Ho, D., Lee, P. K. H., Martin, A. D., Chin, I. L., Wei, Z., Li, H., Atkin, R., Choi, Y. S., Nörret, M., et al. (2020) · Chemical Communications · doi:10.1039/d0cc07115c · Cited by 11
Photoresponsive Emulsion-Templated Porous Materials via Orthogonal Photoclick Chemistry
Hooker, J. P., Parker, B. J., Wright, E., et al. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c22546 · Cited by 10
Self-citationMacrophage heterogeneity and renin-angiotensin system disorders
Wright, M. D., & Binger, K. J. (2017) · Pflügers Archiv - European Journal of Physiology · doi:10.1007/s00424-017-1940-z · Cited by 8
Self-citation
Cited by
Exploring Applications and Preparation Techniques for Cellulose Hydrogels: A Comprehensive Review
Tang, Y., Fang, Z., & Lee, H.-J. (2024) · Gels · doi:10.3390/gels10060365 · Cited by 50
“The mechanical properties of cellulose hydrogels are critical in a variety of applications [100–102], particularly in biomedical [103] and engineering [69] applications where materials must exhibit specific strengths and elasticity.”
BackgroundSelf-healing, 3D printed bioinks from self-assembled peptide and alginate hybrid hydrogels
Field, E. H., Ratcliffe, J., Johnson, C. J., Binger, K. J., & Reynolds, N. P. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.214145 · Cited by 28
Self-citationEmulsion templating: DIY versatility for the creative design of macroporous polymers
Ahmad, S., & Silverstein, M. S. (2025) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2025.101970 · Cited by 28
Microspheres for 3D bioprinting: a review of fabrication methods and applications
Karaman, D., Williams, K., Phelps, J., Boucan, F. S. O. L., Lewandowski, G., O’Grady, K., Yu, B., & Willerth, S. M. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1551199 · Cited by 9
Kong, D., Zhang, M., Bhandari, B., Fan, D., & Li, C. (2026) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2026.2714682 · Cited by 6
Metadata
- Authors
- Mclean, B., Ratcliffe, J., Parker, B. J., Field, E. H., Hughes, S. J., Cutter, S. W., Iseppi, K. J., Cameron, N. R., Binger, K. J., & Reynolds, N. P.
- Affiliations
- La Trobe University (AU)
- Monash University (AU)
- University of Warwick (GB)
- Corresponding author
- Reynolds, Nicholas P.
- ORCID
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2024-01-04
- Volume
- 25
- Issue
- 2
- Pages
- 829-837
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W4390586582
- Cited by
- 6
- References
- 38
- Citations by year
- 2026: 1 · 2025: 2 · 2024: 3
- FWCI
- 0.66
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Warwick Research Archive Portal (University of Warwick) (submittedVersion)
- Funders
- La Trobe Institute for Molecular Science, La Trobe University
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- 3D bioprinting, composite hydrogels, tunable mechanical properties, cellulose nanofibers, gelatin methacryloyl, scaffold porosity
- MeSH terms
- Cell Culture Techniques, Three Dimensional, Biocompatible Materials, Cellulose, Gelatin, Polymers, Porosity, Hydrogels, Tissue Engineering, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.