Fabrication of a Biodegradable Implant with Tunable Characteristics for Bone Implant Applications
The DOI matches its Crossref record; 47 of the 48 references it cites were found in a registry or an index.
Abstract
Biodegradable polymers are appealing material for the manufacturing of surgical implants as such implants break down in vivo, negating the need for a subsequent operation for removal. Many biocompatible polymers produce acidic breakdown products that can lead to localized inflammation and osteolysis. This study assesses the feasibility of fabricating implants out of poly(propylene carbonate) (PPC)–starch that degrades into CO 2 and water. The basic compression modulus of PPC–starch (1:1 w/w) is 34 MPa; however, the addition of glycerol (1% w/w) and water as plasticizers doubles this value and enhances the surface wettability. The bioactivity and stiffness of PPC–starch blends is increased by the addition of bioglass microparticles (10% w/w) as shown by in vitro osteoblast differentiation assay and mechanical testing. MicroCT analysis confirms that the bioglass microparticles are evenly distributed throughout biomaterial. PPC–starch–bioglass was tested in vivo in two animal models. A murine subcutaneous pellet degradation assay demonstrates that the PPC–starch–bioglass blend’s volume fraction loss is 46% after 6 months postsurgery, while it is 27% for poly(lactic acid). In a rat knee implantation model, PPC–starch–bioglass screws inserted into the distal femur show osseointegration with no localized adverse effects after 3 and 12 weeks. These data support the further development of PPC–starch–bioglass as a medical biomaterial.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“All of these physical modification methods are unstable when compared to the chemical modification of biologically active factors [136].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [136]
Citations
Cites
How useful is SBF in predicting in vivo bone bioactivity?
Kokubo, T., & Takadama, H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.017 · Cited by 9,576
Biomaterials & scaffolds for tissue engineering
O'Brien, F. J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70058-x · Cited by 3,437
Osteoblast adhesion on biomaterials
Anselme, K. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00242-2 · Cited by 2,500
Young, R. J., & Lovell, P. A. (1992) · Springer eBooks · doi:10.1007/978-1-4615-3478-5 · Cited by 2,116
Biodegradable Multiphase Systems Based on Plasticized Starch: A Review
Avérous, L. (2004) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1081/mc-200029326 · Cited by 834
Raynaud, S., Champion, E., Bernache-Assollant, D., & Thomas, P. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00218-6 · Cited by 790
The future of biologic coatings for orthopaedic implants
Goodman, S. B., Yao, Z., Keeney, M., & Yang, F. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.01.074 · Cited by 779
Biomedical Applications of Biodegradable Polyesters
Manavitehrani, I., Fathi, A., Badr, H., Daly, S., Negahi Shirazi, A., & Dehghani, F. (2016) · Polymers · doi:10.3390/polym8010020 · Cited by 514
Self-citationEffects of Hydrophilic Plasticizers on Mechanical, Thermal, and Surface Properties of Chitosan Films
Suyatma, N. E., Tighzert, L., Copinet, A., & Coma, V. (2005) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf048790+ · Cited by 466
Polymer carriers for drug delivery in tissue engineering
Sokolsky-Papkov, M., Agashi, K., Olaye, A., Shakesheff, K., & Domb, A. J. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.001 · Cited by 452
Research works printed but not linked: 1
- Wang Y., 2011, China Med. J., 124, 2361
Cited by
CO2-fixation into cyclic and polymeric carbonates: principles and applications
Kamphuis, A. J., Picchioni, F., & Pescarmona, P. P. (2019) · Green Chemistry · doi:10.1039/c8gc03086c · Cited by 828
Synthesis and Biological Application of Polylactic Acid
Li, G., Zhao, M., Xu, F., Yang, B., Li, X., Meng, X., Teng, L., Sun, F., & Li, Y. (2020) · Molecules · doi:10.3390/molecules25215023 · Cited by 492
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Kurowiak, J., Klekiel, T., & Będziński, R. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms242316952 · Cited by 164
Advanced Bioactive Glasses: The Newest Achievements and Breakthroughs in the Area
Kaou, M. H., Furkó, M., Balázsi, K., & Balázsi, C. (2023) · Nanomaterials · doi:10.3390/nano13162287 · Cited by 157
Taraballi, F., Sushnitha, M., Tsao, C., Bauza, G., Liverani, C., Shi, A., & Tasciotti, E. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800490 · Cited by 129
Tailoring degradation rates of silk fibroin scaffolds for tissue engineering
Zhang, L., Liu, X., Li, G., Wang, P., & Yang, Y. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36537 · Cited by 106
Syntheses, properties, and applications of CO2-based functional polymers
Song, B., Qin, A., & Tang, B. Z. (2022) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2021.100719 · Cited by 103
Manavitehrani, I., Le, T. Y. L., Daly, S. R., Wang, Y., Maitz, P., Schindeler, A., & Dehghani, F. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.11.088 · Cited by 98
Self-citationWilson, J. A., Luong, D., Kleinfehn, A. P., Sallam, S., Wesdemiotis, C., & Becker, M. L. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b09978 · Cited by 94
Bioactive Glass—An Extensive Study of the Preparation and Coating Methods
Maximov, M., Maximov, O.-C., Crăciun, L. N., Ficai, D., Ficai, A., & Andronescu, E. (2021) · Coatings · doi:10.3390/coatings11111386 · Cited by 83
Muthuraj, R., & Mekonnen, T. H. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800366 · Cited by 72
Gan, D., Liu, M., Xu, T. K., Wang, K., Tan, H., & Lu, X. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36453 · Cited by 62
Erdal, N. B., & Hakkarainen, M. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00207 · Cited by 49
Petersen, S. R., Wilson, J. A., & Becker, M. L. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01372 · Cited by 47
In vivo behavior of bioactive glass-based composites in animal models for bone regeneration
Liang, W., Wu, X., Dong, Y., Shao, R., Chen, X., Zhou, P., & Xu, F. (2021) · Biomaterials Science · doi:10.1039/d0bm01663b · Cited by 41
Bora, D., Dutta, H., Saha, B., Reddy, Y. A. K., Patel, R., Verma, S. K., Sellamuthu, P. S., Sadiku, E. R., & Jayaramudu, J. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.107304 · Cited by 46
Xu, H., Shen, M., Han, S., Xu, W., Zhang, S., Yang, H., Zhou, D., & Hakkarainen, M. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c02165 · Cited by 36
Soltani, M., & Alizadeh, P. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.054 · Cited by 37
Madival, H., Rajiv, A., Muniraju, C., & Reddy, M. S. (2025) · Biomedical Materials & Devices · doi:10.1007/s44174-025-00297-2 · Cited by 45
“Apatite layer development has been observed after immersion in body fluids [185, 186].”
Flora, T., de Torre, I. G., Alonso, M., & Rodríguez‐Cabello, J. C. (2019) · Biofabrication · doi:10.1088/1758-5090/ab10a5 · Cited by 40
Wang, L., Li, Y., Yang, J., Wu, Q., Liang, S. M., & Liu, Z. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25052938 · Cited by 40
“…Microporous PPC/laponite nanocomposites Melt blending and surface treatment with sodium hydroxide [114] PPC-starch-bioglass blends Melt blending [129] PPC multilayer membranes Aminolysis and layer-by-layer assembly [130] Porous PPC/poly(D-lactic acid)/ β -tricalcium phosphate scaffolds Salt…”
MethodIn Vitro and In Vivo Biocompatibility of Bacterial Cellulose
Girard, V., Chaussé, J., Borduas, M., Dubuc, É., Iorio‐Morin, C., Brisebois, S., & Vermette, P. (2024) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35488 · Cited by 39
Zia, I., Jolly, R., Mirza, S., Umar, M. S., Owais, M., & Shakir, M. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00948 · Cited by 32
Cai, M., Liu, H., Jiang, Y., Wang, J., & Zhang, S. (2019) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2019.110445 · Cited by 31
From epoxides and carbon dioxide to polycarbonates: synthesis, properties and applications
Chernikova, E. V., & Beletskaya, I. P. (2024) · Russian Chemical Reviews · doi:10.59761/rcr5112 · Cited by 30
Madival, H., & Rajiv, A. (2025) · Biomedical Materials & Devices · doi:10.1007/s44174-025-00310-8 · Cited by 25
“In vitro studies demonstrate the development of apatite layers after immersion in simulated body fluids [165, 166], while extended in vivo studies using animal models evaluate cytotoxicity and cytocompatibility [167–172].”
Blanco, G. E. D. O., de Souza, C. W. O., Bernardo, M. P., Zenke, M., Mattoso, L. H. C., & Moreira, F. K. V. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102169 · Cited by 23
PAA-g-PLA amphiphilic graft copolymer: synthesis, self-assembly, and drug loading ability
Qian, W., Song, T., Ye, M., Xu, P., Lu, G., & Huang, X. (2017) · Polymer Chemistry · doi:10.1039/c7py00762k · Cited by 23
Tharakan, S., Khondkar, S., Lee, S., Ahn, S., Mathew, C. G., Greșiță, A., Hadjiargyrou, M., & Ilyas, A. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics15010011 · Cited by 29
“As bone healing takes place over 4 to 8 weeks, bioresponsive implants need to be biodegradable within this time frame to avoid early degradation [48].”
Fatigue Crack Growth and Fracture of Internal Fixation Materials in In Vivo Environments—A Review
Wu, K., Li, B., & Guo, J. J. (2021) · Materials · doi:10.3390/ma14010176 · Cited by 21
Le, T. D. H., Tuan, H. N. A., Nguyen, V. T., & Le, A. T. (2023) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-023-06137-3 · Cited by 22
Manavitehrani, I., Ebrahimi, P., Yang, I., Daly, S. R., Schindeler, A., Saxena, A., Little, D. G., Fletcher, D. F., Dehghani, F., & Winlaw, D. S. (2019) · Cardiovascular Engineering and Technology · doi:10.1007/s13239-019-00406-5 · Cited by 18
Self-citationFunctional characterization of an enzymatically degradable multi-bioactive elastin-like recombinamer
Girotti, A., González‐Valdivieso, J., Santos, M., Martín, L., & Arias, F. J. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.08.004 · Cited by 16
Zhang, H., Wei, Q., Ji, R., Xie, E., Sun, A., Xiao, B., Huang, C., Ma, S., Wei, J., Yang, X., et al. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb00017f · Cited by 12
Kamphuis, A. J., Tran, M., Picchioni, F., & Pescarmona, P. P. (2021) · Green Chemical Engineering · doi:10.1016/j.gce.2021.12.009 · Cited by 10
Haddadi, M. H., Karamian, E., Bakhsheshi‐Rad, H. R., & Kasiri-Asgarani, M. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.10.343 · Cited by 11
Advanced progress of adipose-derived stem cells-related biomaterials in maxillofacial regeneration
Zhang, L., Yu, Z., Liu, S., Liu, F., Zhou, S., Zhang, Y., & Tian, Y. (2025) · Stem Cell Research & Therapy · doi:10.1186/s13287-025-04191-y · Cited by 11
“However, the incorporation of biomaterials such as HAp, calcium silicate, polyethylene glycol, and poly-glycolic acid can yield composite scaffolds that exhibit enhanced elastic modulus and improved osteoinductive potential [100, 101].”
Advances in the Development of Biodegradable Polymeric Materials for Biomedical Applications
Patra, S., Singh, M., Pareek, D., Wasnik, K., Gupta, P. S., & Paik, P. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00129-2 · Cited by 8
Liu, J., Shen, X., Tang, S., Li, H., Mei, S., Zheng, H. Y., Sun, Y., Zhao, J., Kaewmanee, R., Yang, L., et al. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01137 · Cited by 8
Synthesis of a green functional carbon dioxide‐based polycarbonate using bio‐based monomers
Mao, Z., Wang, W., Jia, X., Liu, Y., Xia, L., Li, L.-L., Zhou, L., Liu, X., Chen, H., & Zheng, X. (2024) · Journal of Polymer Science · doi:10.1002/pol.20240528 · Cited by 7
Nanomaterials in 3D bioprinting
Manavitehrani, I., Nasiri, N., & Parviz, M. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-813892-2.00006-9 · Cited by 8
Self-citationLiu, X. H., Jiang, Z., Xing, D., Yang, Y., Li, Z., & Sun, Z. (2022) · Frontiers in Chemistry · doi:10.3389/fchem.2022.1035825 · Cited by 6
““additives” to improve the properties of other polymers (Yang et al., 2014; Jing et al., 2015; Manavitehrani et al., 2017; Chen X. et al., 2022).”
BackgroundWang, W., Zhou, X. Q., Wei, M., Liu, Z., Lu, G., & Huang, X. (2017) · RSC Advances · doi:10.1039/c7ra11975e · Cited by 6
Innovative Fixation Methods of Osteotomies for Hallux Valgus Correction
Plaaß, C., Reifenrath, J., & Richter, A. (2024) · Foot and Ankle Clinics · doi:10.1016/j.fcl.2024.04.006 · Cited by 5
Advance Biodegradable Polymer Composite Materials for Biomedical Additive Manufacturing Applications
Kumar, S., Krishnan, S., & Prabakaran, K. (2023) · Advances in chemical and materials engineering book series · doi:10.4018/978-1-6684-6009-2.ch007 · Cited by 2
Bioactive glass coatings on metallic implants for biomedical applications
Neguț, I., Ristoscu, C., & Bita, B. I. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95460-0.00003-4 · Cited by 2
Nobuoka, H., Nagasawa, M., Chanthaset, N., Yoshida, H., Haramiishi, Y., & Ajiro, H. (2020) · Journal of Polymer Science · doi:10.1002/pol.20200390 · Cited by 3
Madival, H., & Naik, N. D. (2026) · Biomedical Materials & Devices · doi:10.1007/s44174-026-00655-8 · Cited by 2
Bioengineered dynamic systems based on elastin-like recombinamers
Flora, T. (2019) · UVaDOC UVaDOC University of Valladolid Documentary Repository (University of Valladolid) · doi:10.35376/10324/38770 · Cited by 1
Daly, S. R. (2018) · The Sydney eScholarship Repository (The University of Sydney)
Nanomaterials for Designing Functional Properties of Bioinks
Hussein, L., Mabrouk, M., Farahat, M. G., & Beherei, H. H. (2024) · Wiley eBooks · doi:10.1002/9781119894407.ch15
Laves-phase strengthening in laser-rapid fabricated zinc‑lithium‑calcium alloy implants
Shuai, C., Zhou, J., Yang, M., Shuai, Y., Dong, Z., Yang, Y., & Shuai, X. (2026) · Materials Characterization · doi:10.1016/j.matchar.2026.116563
Composites and natural materials in additive manufacturing: Bridging synthetic and bio-based systems
Whenish, R. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-33889-2.00007-8
Белкин, Д., Яковлюк, Р., & Zamyatin, E. (2026) · Cifra LLC Journals · doi:10.60797/irj.2026.166.96.1
Белкин, Д., Яковлюк, Р., & Zamyatin, E. (2026) · Cifra LLC Journals · doi:10.60797/irj.2026.166.96
Таблица физико-химических показателей
Белкин, Д., Яковлюк, Р., & Zamyatin, E. (2026) · Cifra LLC Journals · doi:10.60797/irj.2026.166.96.2
Metadata
- Authors
- Manavitehrani, I., Fathi, A., Wang, Y., Maitz, P. K., Mirmohseni, F., Cheng, T. L., Peacock, L., Little, D. G., Schindeler, A., & Dehghani, F.
- Affiliations
- The University of Sydney (AU)
- Children's Hospital at Westmead (AU)
- Corresponding author
- Dehghani, Fariba
- ORCID
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-05-23
- Volume
- 18
- Issue
- 6
- Pages
- 1736-1746
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2619049879
- Cited by
- 55
- References
- 48
- Citations by year
- 2026: 4 · 2025: 3 · 2024: 7 · 2023: 6 · 2022: 6 · 2021: 7 · 2020: 4 · 2019: 7 · 2018: 8 · 2017: 3
- FWCI
- 2.71
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- University of Sydney
- Department of Education and Training
- Australian Research Council
- Global Human Capital Pty Ltd
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Magnesium Alloys: Properties and Applications
- Keywords
- biodegradable implants, poly(propylene carbonate), starch, glycerol plasticizer, bone screws, osseointegration, in vivo degradation, osteogenic differentiation, compressive modulus, wettability, distal femur
- MeSH terms
- Bone-Implant Interface, Animals, Biocompatible Materials, Carbon Dioxide, Cell Differentiation, Ceramics, Female, Femur, Glycerol, Humans, Hydrolysis, Male, Mice, Inbred BALB C, Osteoblasts, Polypropylenes, Starch, Water, Wettability, Absorbable Implants, Cell Line, Tumor, Mice, Rats
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.