Fabrication of a Biodegradable Implant with Tunable Characteristics for Bone Implant Applications
The DOI matches its Crossref record; 47 of the 48 references it cites were found in a registry or an index.
Abstract
Biodegradable polymers are appealing material for the manufacturing of surgical implants as such implants break down in vivo, negating the need for a subsequent operation for removal. Many biocompatible polymers produce acidic breakdown products that can lead to localized inflammation and osteolysis. This study assesses the feasibility of fabricating implants out of poly(propylene carbonate) (PPC)–starch that degrades into CO 2 and water. The basic compression modulus of PPC–starch (1:1 w/w) is 34 MPa; however, the addition of glycerol (1% w/w) and water as plasticizers doubles this value and enhances the surface wettability. The bioactivity and stiffness of PPC–starch blends is increased by the addition of bioglass microparticles (10% w/w) as shown by in vitro osteoblast differentiation assay and mechanical testing. MicroCT analysis confirms that the bioglass microparticles are evenly distributed throughout biomaterial. PPC–starch–bioglass was tested in vivo in two animal models. A murine subcutaneous pellet degradation assay demonstrates that the PPC–starch–bioglass blend’s volume fraction loss is 46% after 6 months postsurgery, while it is 27% for poly(lactic acid). In a rat knee implantation model, PPC–starch–bioglass screws inserted into the distal femur show osseointegration with no localized adverse effects after 3 and 12 weeks. These data support the further development of PPC–starch–bioglass as a medical biomaterial.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“All of these physical modification methods are unstable when compared to the chemical modification of biologically active factors [136].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [136]
Citations
Cites
How useful is SBF in predicting in vivo bone bioactivity?
Kokubo, T., & Takadama, H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.017 · Cited by 9,576
Biomaterials & scaffolds for tissue engineering
O'Brien, F. J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70058-x · Cited by 3,437
Osteoblast adhesion on biomaterials
Anselme, K. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00242-2 · Cited by 2,500
Young, R. J., & Lovell, P. A. (1992) · Springer eBooks · doi:10.1007/978-1-4615-3478-5 · Cited by 2,116
Biodegradable Multiphase Systems Based on Plasticized Starch: A Review
Avérous, L. (2004) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1081/mc-200029326 · Cited by 834
Raynaud, S., Champion, E., Bernache-Assollant, D., & Thomas, P. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00218-6 · Cited by 790
The future of biologic coatings for orthopaedic implants
Goodman, S. B., Yao, Z., Keeney, M., & Yang, F. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.01.074 · Cited by 779
Biomedical Applications of Biodegradable Polyesters
Manavitehrani, I., Fathi, A., Badr, H., Daly, S., Negahi Shirazi, A., & Dehghani, F. (2016) · Polymers · doi:10.3390/polym8010020 · Cited by 514
Self-citationEffects of Hydrophilic Plasticizers on Mechanical, Thermal, and Surface Properties of Chitosan Films
Suyatma, N. E., Tighzert, L., Copinet, A., & Coma, V. (2005) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf048790+ · Cited by 466
Polymer carriers for drug delivery in tissue engineering
Sokolsky-Papkov, M., Agashi, K., Olaye, A., Shakesheff, K., & Domb, A. J. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.001 · Cited by 452
Bioactive Coatings for Orthopaedic Implants—Recent Trends in Development of Implant Coatings
Zhang, B., Myers, D., Wallace, G., Brandt, M., & Choong, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms150711878 · Cited by 394
Compatibility of Mammalian Cells on Surfaces of Poly(dimethylsiloxane)
Lee, J. N., Jiang, X., Ryan, D., & Whitesides, G. M. (2004) · Langmuir · doi:10.1021/la048562+ · Cited by 379
Preparation and properties evaluation of chitosan-coated cassava starch films
Bangyekan, C., Aht-Ong, D., & Srikulkit, K. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.07.032 · Cited by 318
Blends of Poly-(ε-caprolactone) and Polysaccharides in Tissue Engineering Applications
Ciardelli, G., Chiono, V., Vozzi, G., Pracella, M., Ahluwalia, A., Barbani, N., Cristallini, C., & Giusti, P. (2005) · Biomacromolecules · doi:10.1021/bm0500805 · Cited by 310
Díaz, A., Katsarava, R., & Puiggalí, J. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15057064 · Cited by 250
Allen, L. T., Tosetto, M., Miller, I. S., O’Connor, D. P., Penney, S. C., Lynch, I., Keenan, A. K., Pennington, S. R., Dawson, K. A., & Gallagher, W. M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.019 · Cited by 245
Proliferation of aligned mammalian cells on laser-nanostructured polystyrene
Rebollar, E., Frischauf, I., Olbrich, M., Peterbauer, T., Hering, S., Preiner, J., Hinterdorfer, P., Romanin, C., & Heitz, J. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.039 · Cited by 237
Biological response of intramedullary bone to poly‐L‐lactic acid
Suganuma, J., & Alexander, H. (1993) · Journal of Applied Biomaterials · doi:10.1002/jab.770040103 · Cited by 213
Jost, V., Kobsik, K., Schmid, M., & Noller, K. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.096 · Cited by 193
The Current and Future Therapies of Bone Regeneration to Repair Bone Defects
Jimi, E., Hirata, S., Osawa, K., Terashita, M., Kitamura, C., & Fukushima, H. (2012) · International Journal of Dentistry · doi:10.1155/2012/148261 · Cited by 183
Biological and mechanical properties of PMMA-based bioactive bone cements
Mousa, W. F., Kobayashi, M., Shinzato, S., Kamimura, M., Neo, M., Yoshihara, S., & Nakamura, T. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00097-1 · Cited by 178
A wettability gradient as a tool to study protein adsorption and cell adhesion on polymer surfaces
Lee, J. H., & Lee, H. B. (1993) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856293x00131 · Cited by 166
Casariego, A., de Souza, B. W. S., Vicente, A. A., Teixeira, J. A., Viera, L. C., & Díaz, R. (2007) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2007.09.010 · Cited by 124
Biomaterials Science: An Evolving, Multidisciplinary Endeavor
Ratner, B. D., Hoffman, A. S., Schöen, F. J., & Lemons, J. E. (2012) · Elsevier eBooks · doi:10.1016/b978-0-08-087780-8.00153-4 · Cited by 107
Fathi, A., Mithieux, S. M., Wei, H., Chrzanowski, W., Valtchev, P., Weiss, A. S., & Dehghani, F. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.03.026 · Cited by 94
Self-citationVergnol, G., Ginsac, N., Rivory, P., Meille, S., Chenal, J., Balvay, S., Chevalier, J., & Hartmann, D. J. (2015) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33364 · Cited by 82
Qian, J., Xu, W., Yong, X., Jin, X., & Zhang, W. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.11.047 · Cited by 78
Failure of HA coating on a gritblasted acetabular cup: 155 patients followed for 7-10 years
Reikerås, O., & Gunderson, R. B. (2002) · Acta Orthopaedica Scandinavica · doi:10.1080/000164702317281503 · Cited by 75
Wan, P., Yuan, C., Tan, L., Li, Q., & Yang, K. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.04.011 · Cited by 72
Manavitehrani, I., Fathi, A., Wang, Y., Maitz, P., & Dehghani, F. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06407 · Cited by 68
Self-citationDånmark, S., Finne‐Wistrand, A., Schander, K., Hakkarainen, M., Arvidson, K., Mustafa, K., & Albertsson, A. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.02.011 · Cited by 67
Halász, K., & Csóka, L. (2012) · Journal of Engineering · doi:10.1155/2013/329379 · Cited by 67
Natural Polymers in Tissue Engineering Applications
Gomes, M. E., Azevedo, H. S., Malafaya, P. B., Silva, S. S., Oliveira, J. M., Silva, G. A., Mano, R. S. J., & Reis, R. L. (2012) · Elsevier eBooks · doi:10.1016/b978-1-4557-2834-3.00016-1 · Cited by 64
Boron containing poly-(lactide-co-glycolide) (PLGA) scaffolds for bone tissue engineering
Doğan, A., Demirci, S., Bayır, Y., Halıcı, Z., Karakuş, E., Aydın, A., Çadırcı, E., Albayrak, A., Demirci, E., Karaman, A., et al. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.08.035 · Cited by 62
Laboulfie, F., Hémati, M., Lamure, A., & Diguet, S. (2012) · Powder Technology · doi:10.1016/j.powtec.2012.07.035 · Cited by 55
Zhong, X., & Dehghani, F. (2012) · Green Chemistry · doi:10.1039/c2gc35608b · Cited by 42
Self-citationNanoscale Chemical Interaction Enhances the Physical Properties of Bioglass Composites
Ravarian, R., Zhong, X., Barbeck, M., Ghanaati, S., Kirkpatrick, C. J., Murphy, C. M., Schindeler, A., Chrzanowski, W., & Dehghani, F. (2013) · ACS Nano · doi:10.1021/nn402157n · Cited by 41
Self-citationApplications of Poly(lactic Acid)
Sin, L. T., Rahmat, A. R., & Rahman, W. A. W. A. (2012) · Elsevier eBooks · doi:10.1016/b978-1-4557-2834-3.00003-3 · Cited by 35
A Novel Strategy for Softening Gelatin–Bioactive-Glass Hybrids
Shirazi, A. N., Fathi, A., Suarez, F. G., Wang, Y., Maitz, P., & Dehghani, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b09006 · Cited by 34
Self-citationOsteoblast response to polymethyl methacrylate bioactive glass composite
Hautamäki, M., Meretoja, V. V., Mattila, R., Aho, A. J., & VALLITTU, P. K. (2010) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-010-4018-4 · Cited by 31
Thankam, F. G., & Jayabalan, M. (2015) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2015.06.034 · Cited by 23
Bioresorbable Collagen Membranes for Guided Bone Regeneration
Tal, H., Moses, O., Kozlovsky, A., & Nemcovsky, C. E. (2012) · InTech eBooks · doi:10.5772/34667 · Cited by 23
Huang, J., Jing, X., Geng, L., Chen, B., Mi, H., & Peng, X. (2015) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2015.04.019 · Cited by 23
Talwar, A., Thangakumaran, S., Sudarsan, S., Arun, K., & James, J. R. (2009) · Indian Journal of Dental Research · doi:10.4103/0970-9290.49048 · Cited by 20
Mann, K. A., Miller, M. A., Costa, P. A., Race, A., & Izant, T. H. (2011) · The Journal of Arthroplasty · doi:10.1016/j.arth.2011.04.018 · Cited by 12
Antoniac, I., Lăptoiu, D., Popescu, D., Cotruț, C. M., & Parpală, R. C. (2012) · Springer series in biomaterials science and engineering · doi:10.1007/978-1-4614-4328-5_6 · Cited by 11
Preparation and characterization of plla composite scaffolds by ScCO2‐induced phase separation
Ding, Z., Liu, Z., Wei, W., & Li, Z. (2012) · Polymer Composites · doi:10.1002/pc.22299 · Cited by 11
Research works printed but not linked: 1
- Wang Y., 2011, China Med. J., 124, 2361
Cited by
CO2-fixation into cyclic and polymeric carbonates: principles and applications
Kamphuis, A. J., Picchioni, F., & Pescarmona, P. P. (2019) · Green Chemistry · doi:10.1039/c8gc03086c · Cited by 828
Synthesis and Biological Application of Polylactic Acid
Li, G., Zhao, M., Xu, F., Yang, B., Li, X., Meng, X., Teng, L., Sun, F., & Li, Y. (2020) · Molecules · doi:10.3390/molecules25215023 · Cited by 492
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Kurowiak, J., Klekiel, T., & Będziński, R. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms242316952 · Cited by 164
Advanced Bioactive Glasses: The Newest Achievements and Breakthroughs in the Area
Kaou, M. H., Furkó, M., Balázsi, K., & Balázsi, C. (2023) · Nanomaterials · doi:10.3390/nano13162287 · Cited by 157
Metadata
- Authors
- Manavitehrani, I., Fathi, A., Wang, Y., Maitz, P. K., Mirmohseni, F., Cheng, T. L., Peacock, L., Little, D. G., Schindeler, A., & Dehghani, F.
- Affiliations
- The University of Sydney (AU)
- Children's Hospital at Westmead (AU)
- Corresponding author
- Dehghani, Fariba
- ORCID
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-05-23
- Volume
- 18
- Issue
- 6
- Pages
- 1736-1746
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2619049879
- Cited by
- 55
- References
- 48
- Citations by year
- 2026: 4 · 2025: 3 · 2024: 7 · 2023: 6 · 2022: 6 · 2021: 7 · 2020: 4 · 2019: 7 · 2018: 8 · 2017: 3
- FWCI
- 2.71
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- University of Sydney
- Department of Education and Training
- Australian Research Council
- Global Human Capital Pty Ltd
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Magnesium Alloys: Properties and Applications
- Keywords
- biodegradable implants, poly(propylene carbonate), starch, glycerol plasticizer, bone screws, osseointegration, in vivo degradation, osteogenic differentiation, compressive modulus, wettability, distal femur
- MeSH terms
- Bone-Implant Interface, Animals, Biocompatible Materials, Carbon Dioxide, Cell Differentiation, Ceramics, Female, Femur, Glycerol, Humans, Hydrolysis, Male, Mice, Inbred BALB C, Osteoblasts, Polypropylenes, Starch, Water, Wettability, Absorbable Implants, Cell Line, Tumor, Mice, Rats
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.