The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Strong, Resilient, and Sustainable Aliphatic Polyester Thermoplastic Elastomers
Open accessAbstract
Thermoplastic elastomers (TPEs) composed of ABA block polymers exhibit a wide variety of properties and are easily processable as they contain physical, rather than chemical, cross-links. Poly(γ-methyl-ε-caprolactone) (PγMCL) is an amorphous polymer with a low entanglement molar mass ( M e = 2.9 kg mol –1 ), making it a suitable choice for tough elastomers. Incorporating PγMCL as the midblock with polylactide (PLA) end blocks ( f LA = 0.17) results in TPEs with high stresses and elongations at break (σ B = 24 ± 2 MPa and ε B = 1029 ± 20%, respectively) and low levels of hysteresis. The use of isotactic PLA as the end blocks ( f LLA = 0.17) increases the strength and toughness of the material (σ B = 30 ± 4 MPa, ε B = 988 ± 30%) due to its semicrystalline nature. This study aims to demonstrate how the outstanding properties in these sustainable materials are a result of the entanglements, glass transition temperature, segment–segment interaction parameter, and crystallinity, resulting in comparable properties to the commercially relevant styrene-based TPEs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Green Chemistry: Principles and Practice
Anastas, P., & Eghbali, N. (2010) · Chem. Soc. Rev. · doi:10.1039/b918763b · Cited by 5,256
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Hillmyer, M. A., & Tolman, W. B. (2014) · Accounts of Chemical Research · doi:10.1021/ar500121d · Cited by 635
Self-citationDesigning biodegradable multiblock PCL/PLA thermoplastic elastomers
Cohn, D., & Hotovely Salomon, A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.07.052 · Cited by 355
Aliphatic Polyester Block Polymer Design
Schneiderman, D. K., & Hillmyer, M. A. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00211 · Cited by 290
Self-citationHoneker, C. C., & Thomas, E. L. (1996) · Chemistry of Materials · doi:10.1021/cm960146q · Cited by 253
Thermodynamic Presynthetic Considerations for Ring-Opening Polymerization
Olsén, P., Odelius, K., & Albertsson, A.-C. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.5b01698 · Cited by 244
Scalable production of mechanically tunable block polymers from sugar
Xiong, M., Schneiderman, D. K., Bates, F. S., Hillmyer, M. A., & Zhang, K. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1404596111 · Cited by 203
Self-citationRenewable-Resource Thermoplastic Elastomers Based on Polylactide and Polymenthide
Wanamaker, C. L., O'Leary, L. E., Lynd, N. A., Hillmyer, M. A., & Tolman, W. B. (2007) · Biomacromolecules · doi:10.1021/bm700699g · Cited by 183
Self-citationPressure-Sensitive Adhesives from Renewable Triblock Copolymers
Shin, J., Martello, M. T., Shrestha, M., Wissinger, J. E., Tolman, W. B., & Hillmyer, M. A. (2011) · Macromolecules · doi:10.1021/ma102216d · Cited by 151
Self-citationPolylactide–Poly(6-methyl-ε-caprolactone)–Polylactide Thermoplastic Elastomers
Martello, M. T., & Hillmyer, M. A. (2011) · Macromolecules · doi:10.1021/ma201063t · Cited by 137
Self-citation
Research works printed but not linked: 45
- 10.1002/mren.201300103 · DOI · Paper page
- Holden G., 2004, Thermoplastic Elastomers
- 10.1002/polc.5070260104 · DOI · Paper page
- 10.14478/ace.2014-1025 · DOI
- 10.1016/0142-9612(81)90060-0 · DOI · Paper page
- 10.1021/ma00098a007 · DOI
- 10.1021/bm034247a · DOI · Paper page
- 10.1021/bm015658z · DOI
- 10.1021/bm900721p · DOI
- 10.1016/j.biomaterials.2004.07.052 · DOI · Paper page
- 10.1002/jbm.a.34277 · DOI
- 10.1002/pi.3130 · DOI
- 10.1002/pola.27463 · DOI
- 10.1021/bm400733e · DOI
- 10.1002/pola.21841 · DOI
- 10.1021/ma050510j · DOI
- 10.1002/pol.1975.180130416 · DOI
- 10.1039/b717059a · DOI
- 10.1021/ma060642s · DOI
- 10.1016/j.colsurfb.2015.07.018 · DOI
- 10.1002/app.32546 · DOI
- 10.1016/j.polymer.2007.03.018 · DOI
- 10.1039/C4PY01628A · DOI
- Fiege H., 2000, Ullmann’s Encyclopedia of Industrial Chemistry, 419
- 10.1016/S0926-860X(01)00514-2 · DOI
- 10.1021/op500160f · doi:10.1021/op500160f
- 10.1002/cssc.201403375 · DOI · Paper page
- 10.1021/acs.macromol.5b01029 · DOI
- 10.1021/bm034247a · DOI · Paper page
- 10.1021/mz200006s · DOI · Paper page
- 10.1021/ma991181w · DOI · Paper page
- 10.1021/ma970631m · DOI · Paper page
- 10.1002/(SICI)1099-0518(19970130)35:2<219::AID-POLA3>3.0.CO;2-N · DOI · Paper page
- 10.1021/ma035583m · DOI
- 10.1021/bm025628b · DOI
- 10.1063/1.1707495 · DOI · Paper page
- 10.1002/app.1972.070160115 · DOI
- 10.1002/macp.200300184 · DOI
- 10.1016/j.polymer.2012.07.016 · DOI
- 10.1021/acs.macromol.6b02206 · doi:10.1021/acs.macromol.6b02206
- 10.1002/polc.5070480114 · doi:10.1002/polc.5070480114
- 10.1021/ma001976z · DOI
- 10.1021/ma00118a038 · DOI · Paper page
- 10.1021/acs.macromol.6b02175 · DOI
- 10.1021/ma3026404 · DOI
Cited by
Bio-based polymers with performance-advantaged properties
Cywar, R. M., Rorrer, N. A., Hoyt, C. B., Beckham, G. T., & Chen, E. Y.-X. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00363-3 · Cited by 811
Chameleon-like elastomers with molecularly encoded strain-adaptive stiffening and coloration
Vatankhah-Varnosfaderani, M., Keith, A. N., Cong, Y., Liang, H., Rosenthal, M., Sztucki, M., Clair, C., Magonov, S., Ivanov, D. A., Dobrynin, A. V., et al. (2018) · Science · doi:10.1126/science.aar5308 · Cited by 519
Bio-based polyesters: Recent progress and future prospects
Zhang, Q., Song, M., Xu, Y., Wang, W., Wang, Z., & Zhang, L. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101430 · Cited by 433
Stereochemical enhancement of polymer properties
Worch, J. C., Prydderch, H., Jimaja, S., Bexis, P., Becker, M. L., & Dove, A. P. (2019) · Nature Reviews Chemistry · doi:10.1038/s41570-019-0117-z · Cited by 336
Wang, W., Lu, W., Goodwin, A., Wang, H., Yin, P., Kang, N.-G., Hong, K., & Mays, J. W. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.04.002 · Cited by 326
Metadata
- Authors
- Watts, A., Kurokawa, N., & Hillmyer, M. A.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-05-03
- Volume
- 18
- Issue
- 6
- Pages
- 1845-1854
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2611875870
- Cited by
- 188
- References
- 17
- FWCI
- 5.74
- Type
- journal article
- Language
- en
- Open access
- green
- Funders
- Division of Chemistry (CHE-1413862)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Strong, Resilient, and Sustainable Aliphatic Polyester Thermoplastic Elastomers. https://app.cochat.ai/papers/10.1021/acs.biomac.7b00283
- The paper
- Watts, A., Kurokawa, N., & Hillmyer, M. A. (2017). Strong, Resilient, and Sustainable Aliphatic Polyester Thermoplastic Elastomers. Biomacromolecules. https://doi.org/10.1021/acs.biomac.7b00283
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.