CoChat

Aliphatic Polyester Thermoplastic Elastomers Containing Hydrogen-Bonding Ureidopyrimidinone Endgroups

Watts, Annabelle, Hillmyer, Marc A. · 2019 · Biomacromolecules

The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.

Abstract

Polylactide- block-poly(γ-methyl-ε-caprolactone)- block-polylactide (LML) is a sustainable thermoplastic elastomer (TPE) candidate that exhibits competitive mechanical properties as compared to traditional styrenic TPEs. The relatively low glass transition temperature of the polylactide endblocks, however, results in stress relaxation and low levels of elastic recovery. We report the synthesis and characterization of poly(γ-methyl-ε-caprolactone) (PMCL) and LML end-functionalized with ureidopyrimidinone (UPy) hydrogen-bonding moieties to improve the elastic performance of these polymers. Although UPy-functionalized PMCL shows dynamical mechanical behavior that is distinct from the unfunctionalized homopolymer, it does not exhibit elastomeric behavior at room temperature. The addition of UPy endgroups to LML increases the ultimate tensile strength, elongation at break, and tensile toughness compared to unfunctionalized LML. Stress relaxation studies at a fixed strain show reduced levels of stress relaxation in LML with UPy endgroups. The stress relaxation was further reduced by including semicrystalline poly(( S, S)-lactide) as endblocks with UPy endgroups.

Overview

Integrity signals

Registry

Crossref · 10.1021/acs.biomac.9b00411

Cites

72 of 72 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Research works printed but not linked: 3

  1. Holden G., 2004, Thermoplastic Elastomers
  2. van Beek D. J. M., 2005, Polym. Mater.: Sci. Eng., 93, 433
  3. Fox T. G., 1956, Bull. Am. Phys. Soc., 1, 123

Cited by

See all 59

Metadata

Authors
Watts, A., & Hillmyer, M. A.
Affiliations
University of Minnesota (US)
Corresponding author
Hillmyer, Marc A.
Venue
Biomacromolecules
Published
2019-06-26
Volume
20
Issue
7
Pages
2598-2609
ISSN
  • 1525-7797 (ISSN-L)
  • 1526-4602
OpenAlex
W2953408673
Cited by
59
References
72
Citations by year
2026: 5 · 2025: 9 · 2024: 7 · 2023: 7 · 2022: 15 · 2021: 11 · 2020: 3 · 2019: 2
FWCI
2.20
Type
journal article
Language
en
Open access
closed
Locations
  • Biomacromolecules (publishedVersion)
  • PubMed (publishedVersion)
Funders
Division of Chemistry (CHE-1413862)
Topics
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
  • Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
Keywords
thermoplastic elastomers, ureidopyrimidinone, hydrogen bonding, polylactic acid, block copolymers, aliphatic polyesters, stress relaxation, elastic recovery, glass transition temperature, tensile properties
MeSH terms
Hydrogen Bonding, Polyesters, Pyrimidinones, Elastomers

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.