Aliphatic Polyester Thermoplastic Elastomers Containing Hydrogen-Bonding Ureidopyrimidinone Endgroups
The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.
Abstract
Polylactide- block-poly(γ-methyl-ε-caprolactone)- block-polylactide (LML) is a sustainable thermoplastic elastomer (TPE) candidate that exhibits competitive mechanical properties as compared to traditional styrenic TPEs. The relatively low glass transition temperature of the polylactide endblocks, however, results in stress relaxation and low levels of elastic recovery. We report the synthesis and characterization of poly(γ-methyl-ε-caprolactone) (PMCL) and LML end-functionalized with ureidopyrimidinone (UPy) hydrogen-bonding moieties to improve the elastic performance of these polymers. Although UPy-functionalized PMCL shows dynamical mechanical behavior that is distinct from the unfunctionalized homopolymer, it does not exhibit elastomeric behavior at room temperature. The addition of UPy endgroups to LML increases the ultimate tensile strength, elongation at break, and tensile toughness compared to unfunctionalized LML. Stress relaxation studies at a fixed strain show reduced levels of stress relaxation in LML with UPy endgroups. The stress relaxation was further reduced by including semicrystalline poly(( S, S)-lactide) as endblocks with UPy endgroups.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Brunsveld, L., Folmer, B. J. B., Meijer, E. W., & Sijbesma, R. P. (2001) · Chemical Reviews · doi:10.1021/cr990125q · Cited by 3,006
Sustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
Influence of Diluent and of Copolymer Composition on the Glass Temperature of a Poly-mer System
Fox, T. (1956) · Medical Entomology and Zoology · Cited by 1,800
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Constitutive modeling of the large strain time-dependent behavior of elastomers
BERGSTROM, J. (1998) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(97)00075-6 · Cited by 1,147
Strong Dimerization of Ureidopyrimidones via Quadruple Hydrogen Bonding
Beijer, F. H., Sijbesma, R. P., Kooijman, H., Spek, A. L., & Meijer, E. W. (1998) · Journal of the American Chemical Society · doi:10.1021/ja974112a · Cited by 815
Folmer, B. J. B., Sijbesma, R. P., Versteegen, R. M., van der Rijt, J. A. J., & Meijer, E. W. (2000) · Advanced Materials · doi:10.1002/1521-4095(200006)12:12<874::aid-adma874>3.0.co;2-c · Cited by 696
A review of crazing and fracture in thermoplastics
Kambour, R. P. (1973) · Journal of Polymer Science: Macromolecular Reviews · doi:10.1002/pol.1973.230070101 · Cited by 695
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Hillmyer, M. A., & Tolman, W. B. (2014) · Accounts of Chemical Research · doi:10.1021/ar500121d · Cited by 635
Self-citationStability and Lifetime of Quadruply Hydrogen Bonded 2-Ureido-4[1 H]-pyrimidinone Dimers
Söntjens, S. H. M., Sijbesma, R. P., van Genderen, M. H. P., & Meijer, E. W. (2000) · Journal of the American Chemical Society · doi:10.1021/ja000435m · Cited by 542
Research works printed but not linked: 3
- Holden G., 2004, Thermoplastic Elastomers
- van Beek D. J. M., 2005, Polym. Mater.: Sci. Eng., 93, 433
- Fox T. G., 1956, Bull. Am. Phys. Soc., 1, 123
Cited by
Dynamic and reconfigurable materials from reversible network interactions
Webber, M. J., & Tibbitt, M. W. (2022) · Nature Reviews Materials · doi:10.1038/s41578-021-00412-x · Cited by 387
Defining the Macromolecules of Tomorrow through Synergistic Sustainable Polymer Research
Haque, F. M., Ishibashi, J. S. A., Lidston, C. A. L., Shao, H., Bates, F. S., Chang, A. B., Coates, G. W., Cramer, C. J., Dauenhauer, P. J., Dichtel, W. R., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00173 · Cited by 285
Self-citationGregory, G. L., Sulley, G. S., Carrodeguas, L. P., Chen, T. T. D., Santmarti, A., Terrill, N. J., Lee, K.-Y., & Williams, C. K. (2020) · Chemical Science · doi:10.1039/d0sc00463d · Cited by 117
Supramolecular polymer materials based on ureidopyrimidinone quadruple hydrogen bonding units
Verjans, J., & Hoogenboom, R. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101689 · Cited by 117
Liffland, S., & Hillmyer, M. A. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01357 · Cited by 76
Self-citationHydrogen bond reinforced, transparent polycaprolactone-based degradable polyurethane
Zhong, Q., Chen, X., Yang, Y., Cui, C., Ma, L., Li, Z., Zhang, Q., Chen, X., Cheng, Y., & Zhang, Y. (2021) · Materials Chemistry Frontiers · doi:10.1039/d1qm00476j · Cited by 59
Recent Developments in Synthesis, Properties, Applications and Recycling of Bio-Based Elastomers
Burelo, M., Martínez, A., Hernández‐Varela, J. D., Stringer, T., Ramírez-Melgarejo, M., Yau, A. Y., Luna‐Bárcenas, G., & Treviño‐Quintanilla, C. D. (2024) · Molecules · doi:10.3390/molecules29020387 · Cited by 69
Block Poly(carbonate‐ester) Ionomers as High‐Performance and Recyclable Thermoplastic Elastomers
Gregory, G. L., Sulley, G. S., Kimpel, J., Łagodzińska, M., Häfele, L., Carrodeguas, L. P., & Williams, C. K. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202210748 · Cited by 56
Self-healing thermoplastic elastomeric materials: Challenges, opportunities and new approaches
Aiswarya, S., Awasthi, P., & Banerjee, S. S. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111658 · Cited by 59
Janus Cross-links in Supramolecular Networks
Mondal, S., Lessard, J. J., Meena, C. L., Sanjayan, G. J., & Sumerlin, B. S. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c10606 · Cited by 51
Wang, Z., Wang, G., Wang, X., Xu, Z., Li, S., & Zhao, G. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112996 · Cited by 45
Effect of chain relaxation on the shrinkage behavior of TPEE foams fabricated with supercritical CO2
Lu, J., Zhang, H., Chen, Y., Ge, Y., & Liu, T. (2022) · Polymer · doi:10.1016/j.polymer.2022.125262 · Cited by 38
Kałużyński, K., Pretula, J., Lewiński, P., Kaźmierski, S., & Penczek, S. (2022) · Macromolecules · doi:10.1021/acs.macromol.1c02325 · Cited by 41
Thompson, C. B., & Korley, L. T. J. (2020) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00418 · Cited by 33
Respirometry and Cell Viability Studies for Sustainable Polyesters and Their Hydrolysis Products
Reisman, L., Siehr, A., Horn, J., Batiste, D. C., Kim, H. J., Hoe, G. X. D., Ellison, C. J., Shen, W., White, E. M., & Hillmyer, M. A. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c08026 · Cited by 31
Self-citationShentu, Z., Zhang, Z., Zhao, J. H., Chen, C., Wu, Q., Wang, L., & Yan, X. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta02288a · Cited by 29
Miao, X., Han, R., Tian, J., Ma, Y., Müller, A. J., & Li, Z. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202417627 · Cited by 27
Fanlo, P., de Luzuriaga, A. R., Albizu, G., Ximenis, M., Rekondo, A., Grande, H. J., & Sardón, H. (2024) · RSC Applied Polymers · doi:10.1039/d4lp00156g · Cited by 28
Liffland, S., Kumler, M. S., & Hillmyer, M. A. (2023) · ACS Macro Letters · doi:10.1021/acsmacrolett.3c00437 · Cited by 23
Self-citationAsymmetric Miktoarm Star Polymers as Polyester Thermoplastic Elastomers
Blankenship, J. R., Levi, A. E., Goldfeld, D. J., Self, J. L., Alizadeh, N., Chen, D., Fredrickson, G. H., & Bates, C. M. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00214 · Cited by 18
Sustainable thermoplastic elastomers produced via cationic RAFT polymerization
Spring, S. W., Smith-Sweetser, R., Rosenbloom, S. I., Sifri, R. J., & Fors, B. P. (2021) · Polymer Chemistry · doi:10.1039/d0py01640c · Cited by 19
Liu, Y., Zhang, M., Shen, Y., & Li, Z. (2025) · Polymer science & technology. · doi:10.1021/polymscitech.5c00050 · Cited by 20
Zhao, J.-K., Yang, G., Zhu, X., & Wu, G. (2019) · Polymer Chemistry · doi:10.1039/c9py01085h · Cited by 16
Xu, Z., Wang, G., Wang, Z., Zhang, A., & Zhao, G. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126261 · Cited by 16
Katsuhara, S., Sunagawa, N., Igarashi, K., Takeuchi, Y., Takahashi, K., Yamamoto, T., Li, F., Tajima, K., Isono, T., & Satoh, T. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120976 · Cited by 16
Yu, X., Wang, L., Zhang, M., Dong, X., Shen, Y., & Li, Z. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202422779 · Cited by 13
Torres, V. M., LaNasa, J. A., Vogt, B. D., & Hickey, R. J. (2020) · Soft Matter · doi:10.1039/d0sm01661f · Cited by 14
Digital light processing of customized elastic scaffolds by efficient thiol-yne crosslinking
Wang, Z., Lu, Q., Li, X., Zhou, Y., Xiao, Y., & Lang, M. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112586 · Cited by 14
Site-Specific Mineralization of a Polyester Hydrolysis Product in Natural Soil
Batiste, D. C., Hoe, G. X. D., Nelson, T. F., Sodnikar, K., McNeill, K., Sander, M., & Hillmyer, M. A. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c07948 · Cited by 11
Self-citationKurokawa, N., Matsumoto, K., & Hotta, A. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109402 · Cited by 12
Pak, A. R., Park, J. H., & Lee, S. G. (2019) · Polymers · doi:10.3390/polym11101652 · Cited by 11
Kawarazaki, I., & Hayashi, M. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00026 · Cited by 10
Jing, Z., Huang, X., Li, G., Liao, M., Hong, P., Li, Y., & Shi, X. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111637 · Cited by 9
Block Poly(carbonate‐ester) Ionomers as High‐Performance and Recyclable Thermoplastic Elastomers
Gregory, G. L., Sulley, G. S., Kimpel, J., Szewczyk‐Łagodzińska, M., Häfele, L., Carrodeguas, L. P., & Williams, C. K. (2022) · Angewandte Chemie · doi:10.1002/ange.202210748 · Cited by 9
Yang, R., Chen, C., Liu, W., Wang, A., Jiang, P., Li, Z., Luo, F., Li, J., & Tan, H. S. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123394 · Cited by 9
Influence of quadruple hydrogen bonding on polyvinyl butyral resin properties
Liu, X., Gallavardin, T., Burel, F., & Vuluga, D. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.110243 · Cited by 9
Batiste, D. C., Pfau, M. R., Kim, H. J., Ellison, C. J., & Hillmyer, M. A. (2024) · ACS Macro Letters · doi:10.1021/acsmacrolett.4c00474 · Cited by 9
Self-citationKawarazaki, I., Hayashi, M., Shibata, A., & Kaai, M. (2021) · Polymer · doi:10.1016/j.polymer.2021.124235 · Cited by 8
Kang, F., Yang, Y. T., Wang, W., & Li, Z. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5940 · Cited by 7
Fluorinated thermoplastic elastomers
Kumar, D., Dolui, S., Banerjee, S., & Ameduri, B. M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-91758-2.00010-6 · Cited by 7
Asano, S., Choi, J., Tran, T. H., Chanthaset, N., & Ajiro, H. (2021) · Polymers for Advanced Technologies · doi:10.1002/pat.5573 · Cited by 6
Kawarazaki, I., & Hayashi, M. (2021) · Polymer · doi:10.1016/j.polymer.2021.123868 · Cited by 5
Zhai, Y., Zhang, J., Chen, J., Shi, F., Li, Y., Wu, X., Xin, C., & He, Y. (2025) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2025.106784 · Cited by 4
Miyashita, T., & Hayashi, M. (2022) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202200073 · Cited by 4
Madathil, K., Upadhyay, B., Ledford, W. K., Kilbey, S. M., & Stein, G. E. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00591 · Cited by 4
Chen, Q., Zhu, L.-L., Li, X., & Zhang, Z. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112547 · Cited by 4
Miao, X., Han, R., Tian, J., Ma, Y., Müller, A. J., & Li, Z. (2024) · Angewandte Chemie · doi:10.1002/ange.202417627 · Cited by 3
Zhai, Y., Li, W., Zhao, Y., Zhang, Y., Huang, X., Chi, S., Wang, X., & Jiang, Y. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c02662 · Cited by 3
Poly(ether imide)s with tailored end groups
Cao, K., Xu, Z., Guo, D. L., & Liu, G. (2021) · Journal of Polymer Science · doi:10.1002/pol.20210313 · Cited by 3
Recent developments: self-healing polymers based on quadruple hydrogen bonds
Zhang, G., Sun, Z., & Li, M. (2021) · E3S Web of Conferences · doi:10.1051/e3sconf/202129001037 · Cited by 3
Multiresponsive Supramolecular Networks Bound through Strong Dipole–Dipole Interactions
Dishner, I. T., Daymon, S. P., Ma, G., Gu, X., Thornell, T. L., Nazarenko, S. I., & Simon, Y. C. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01038 · Cited by 2
Poly(vinyl ether) Star Copolymers as Bioderived Thermoplastic Elastomers
Shankel, S. L., Krajovic, D. M., Spring, S. W., Zhang, J. Y., Hillmyer, M. A., & Fors, B. P. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01668 · Cited by 2
Self-citationImpact of Crystallization Mode on Performance of Aliphatic Polyester Thermoplastic Elastomers
Kumler, M. S., Haugstad, G. D., & Hillmyer, M. A. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c03039 · Cited by 2
Self-citationWang, Z., Gao, W., Cai, Z., & Xia, H. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57314 · Cited by 1
Erdoğan, S. (2025) · Journal of Polymer Research · doi:10.1007/s10965-025-04508-8 · Cited by 1
Hydrogen-bonded aggregates in bulk polymers
Li, C., Chen, S., Zhu, J., & Binder, W. H. (2026) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2026.102140 · Cited by 1
Liu, J., Xu, J., & Hadjichristidis, N. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00358
Elnagdy, H. M. F., Aydogan, A., & Aydın, A. A. (2026) · Thermochimica Acta · doi:10.1016/j.tca.2026.180296
Kumler, M. S., & Hillmyer, M. A. (2026) · ACS Macro Letters · doi:10.1021/acsmacrolett.6c00423
Self-citation
Metadata
- Authors
- Watts, A., & Hillmyer, M. A.
- Affiliations
- University of Minnesota (US)
- Corresponding author
- Hillmyer, Marc A.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-06-26
- Volume
- 20
- Issue
- 7
- Pages
- 2598-2609
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2953408673
- Cited by
- 59
- References
- 72
- Citations by year
- 2026: 5 · 2025: 9 · 2024: 7 · 2023: 7 · 2022: 15 · 2021: 11 · 2020: 3 · 2019: 2
- FWCI
- 2.20
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Division of Chemistry (CHE-1413862)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- thermoplastic elastomers, ureidopyrimidinone, hydrogen bonding, polylactic acid, block copolymers, aliphatic polyesters, stress relaxation, elastic recovery, glass transition temperature, tensile properties
- MeSH terms
- Hydrogen Bonding, Polyesters, Pyrimidinones, Elastomers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.