The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Etching Mechanism of Monoatomic Aluminum Layers during MXene Synthesis
Abstract
Understanding the etching mechanisms of MXene and obtaining direct insights into the influence of etchants on structural features and defects are of critical importance for improving MXene properties, optimization of etching protocols, and exploring new MXene compositions. Despite their importance, such studies have been challenging because of the monoatomic thickness of the A-element layers being etched and aggressive etchants that hinder in situ studies. Here, we visualize the etching behavior of the Ti 3 AlC 2 MAX phase in different etchants at the atomic scale using focused ion beam and electron microscopy. We also report on the structural changes in the Ti 3 AlC 2 phase as a function of etching time and etchant type (LiF/HCl, HF, or NH 4 HF 2 ) to reveal the etching mechanism for the first time. Interestingly, direct visualization reveals an unexpected stepwise etching where the edge Al atoms at the middle layers of the MAX particle are not etched despite contact with the acidic etchant counterintuitively. Also, while the propagation of the etching front occurs in the direction normal to the inner basal plane for all etchants, we reveal that HF and NH 4 HF 2 etch the grain boundaries of polycrystal MAX particles to expose more edge sites to the etchant, which is not observed for LiF/HCl.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Self-citation2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Self-citation25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Self-citationConductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Self-citationElectromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
Self-citationGuidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Self-citationTwo-Dimensional Transition Metal Carbides
Naguib, M., Mashtalir, O., Carle, J., Presser, V., Lu, J., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2012) · ACS Nano · doi:10.1021/nn204153h · Cited by 4,769
Self-citationCation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Lukatskaya, M. R., Mashtalir, O., Ren, C. E., Dall’Agnese, Y., Rozier, P., Taberna, P. L., Naguib, M., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2013) · Science · doi:10.1126/science.1241488 · Cited by 4,320
Self-citationGogotsi, Y., & Anasori, B. (2019) · ACS Nano · doi:10.1021/acsnano.9b06394 · Cited by 2,541
Self-citationUltra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides
Lukatskaya, M. R., Kota, S., Lin, Z., Zhao, M.-Q., Shpigel, N., Levi, M. D., Halim, J., Taberna, P.-L., Barsoum, M. W., Simon, P., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.105 · Cited by 2,335
Self-citationTwo-Dimensional, Ordered, Double Transition Metals Carbides (MXenes)
Anasori, B., Xie, Y., Beidaghi, M., Lu, J., Hosler, B. C., Hultman, L., Kent, P. R. C., Gogotsi, Y., & Barsoum, M. W. (2015) · ACS Nano · doi:10.1021/acsnano.5b03591 · Cited by 2,110
Self-citationLipatov, A., Alhabeb, M., Lukatskaya, M. R., Boson, A., Gogotsi, Y., & Sinitskii, A. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600255 · Cited by 1,751
Self-citationMetallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Self-citationTransparent Conductive Two-Dimensional Titanium Carbide Epitaxial Thin Films
Halim, J., Lukatskaya, M. R., Cook, K. M., Lu, J., Smith, C. R., Näslund, L.-Å., May, S. J., Hultman, L., Gogotsi, Y., Eklund, P., et al. (2014) · Chemistry of Materials · doi:10.1021/cm500641a · Cited by 1,698
Self-citationThickness-independent capacitance of vertically aligned liquid-crystalline MXenes
Xia, Y., Mathis, T. S., Zhao, M.-Q., Anasori, B., Dang, A., Zhou, Z., Cho, H., Gogotsi, Y., & Yang, S. (2018) · Nature · doi:10.1038/s41586-018-0109-z · Cited by 1,310
Self-citationMXene molecular sieving membranes for highly efficient gas separation
Ding, L., Wei, Y., Li, L., Zhang, T., Wang, H., Xue, J., Ding, L.-X., Wang, S., Caro, J., & Gogotsi, Y. (2018) · Nature Communications · doi:10.1038/s41467-017-02529-6 · Cited by 1,124
Self-citationScalable Synthesis of Ti3C2Tx MXene
Shuck, C. E., Sarycheva, A., Anayee, M., Levitt, A., Zhu, Y., Uzun, S., Balitskiy, V., Zahorodna, V., Gogotsi, O., & Gogotsi, Y. (2020) · Advanced Engineering Materials · doi:10.1002/adem.201901241 · Cited by 868
Self-citationEffective ion sieving with Ti3C2Tx MXene membranes for production of drinking water from seawater
Ding, L., Li, L., Liu, Y., Wu, Y., Lu, Z., Deng, J., Wei, Y., Caro, J., & Wang, H. (2020) · Nature Sustainability · doi:10.1038/s41893-020-0474-0 · Cited by 804
Deysher, G., Shuck, C. E., Hantanasirisakul, K., Frey, N. C., Foucher, A. C., Maleski, K., Sarycheva, A., Shenoy, V. B., Stach, E. A., Anasori, B., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b07708 · Cited by 720
Self-citationLiu, F., Zhou, A., Chen, J., Jia, J., Zhou, W., Wang, L., & Hu, Q. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.04.239 · Cited by 707
Dong, Y., Wu, Z.-S., Zheng, S., Wang, X., Qin, J., Wang, S., Shi, X., & Bao, X. (2017) · ACS Nano · doi:10.1021/acsnano.7b01165 · Cited by 656
Two-dimensional MXene Ti3C2 produced by exfoliation of Ti3AlC2
Feng, A., Yu, Y., Wang, Y., Jiang, F., Yu, Y., Mi, L., & Song, L. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.10.053 · Cited by 651
Overview of the synthesis of MXenes and other ultrathin 2D transition metal carbides and nitrides
Verger, L., Xu, C., Natu, V., Cheng, H.-M., Ren, W., & Barsoum, M. W. (2019) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2019.02.001 · Cited by 600
Kinetics of aluminum extraction from Ti3AlC2 in hydrofluoric acid
Mashtalir, O., Naguib, M., Dyatkin, B., Gogotsi, Y., & Barsoum, M. W. (2013) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2013.01.008 · Cited by 482
Self-citationFabrication and thermal stability of two-dimensional carbide Ti3C2 nanosheets
Wang, K., Zhou, Y., Xu, W., Huang, D., Wang, Z., & Hong, M. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.02.059 · Cited by 409
An investigation into the factors governing the oxidation of two-dimensional Ti3C2MXene
Chae, Y., Kim, S. J., Cho, S.-Y., Choi, J., Maleski, K., Lee, B.-J., Jung, H.-T., Gogotsi, Y., Lee, Y., & Ahn, C. W. (2019) · Nanoscale · doi:10.1039/c9nr00084d · Cited by 403
Self-citationAlameda, L. T., Moradifar, P., Metzger, Z. P., Alem, N., & Schaak, R. E. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04705 · Cited by 388
Oxidation-resistant titanium carbide MXene films
Lee, Y., Kim, S. J., Kim, Y.-J., Lim, Y., Chae, Y., Lee, B.-J., Kim, Y.-T., Han, H., Gogotsi, Y., & Ahn, C. W. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta07036b · Cited by 357
Self-citationChoi, J., Kim, Y., Cho, S., Park, K., Kang, H., Kim, S. J., & Jung, H. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003998 · Cited by 310
Self-citationLayer-by-layer self-assembly of pillared two-dimensional multilayers
Tian, W., VahidMohammadi, A., Wang, Z., Ouyang, L., Beidaghi, M., & Hamedi, M. M. (2019) · Nature Communications · doi:10.1038/s41467-019-10631-0 · Cited by 258
Li, H., Li, X., Liang, J., & Chen, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803987 · Cited by 256
Conversion of non-van der Waals solids to 2D transition-metal chalcogenides
Du, Z., Yang, S., Li, S., Lou, J., Zhang, S., Wang, S., Li, B., Gong, Y., Song, L., Zou, X., et al. (2020) · Nature · doi:10.1038/s41586-019-1904-x · Cited by 216
Interfacial Assembly of Ultrathin, Functional MXene Films
Kim, S. J., Choi, J., Maleski, K., Hantanasirisakul, K., Jung, H., Gogotsi, Y. G., & Ahn, C. W. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b12539 · Cited by 137
Self-citation
Cited by
MXene chemistry, electrochemistry and energy storage applications
Li, X., Huang, Z., Shuck, C. E., Liang, G., Gogotsi, Y., & Zhi, C. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00384-8 · Cited by 1,495
Self-citationFundamentals of MXene synthesis
Lim, K. R. G., Shekhirev, M., Wyatt, B. C., Anasori, B., Gogotsi, Y., & Seh, Z. W. (2022) · Nature Synthesis · doi:10.1038/s44160-022-00104-6 · Cited by 1,236
Self-citationA Review on MXene Synthesis, Stability, and Photocatalytic Applications
Murali, G., Reddy Modigunta, J. K., Park, Y. H., Lee, J.-H., Rawal, J., Lee, S.-Y., In, I., & Park, S.-J. (2022) · ACS Nano · doi:10.1021/acsnano.2c04750 · Cited by 668
Hao, S., Han, H., Yang, Z., Chen, M., Jiang, Y., Lu, G., Dong, L., Wen, H., Li, H., Liu, J., et al. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00901-w · Cited by 280
Metadata
- Authors
- Kim, Y.-J., Kim, S. J., Seo, D., Chae, Y., Anayee, M., Lee, Y., Gogotsi, Y., Ahn, C. W., & Jung, H.-T.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-08-12
- Volume
- 33
- Issue
- 16
- Pages
- 6346-6355
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W3193307311
- Cited by
- 299
- References
- 33
- FWCI
- 11.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.