The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Bulk-Type All Solid-State Batteries with 5 V Class LiNi0.5Mn1.5O4 Cathode and Li10GeP2S12 Solid Electrolyte
Abstract
All solid-state batteries are of key importance in the development of next-generation energy storage devices with high energy density. Herein, we report the fabrication and operation of bulk-type 5 V-class all solid-state batteries consisting of LiNi 0.5 Mn 1.5 O 4 cathode, Li 10 GeP 2 S 12 solid-electrolyte, and Li metal anode. The 1st discharge capacity is about 80 mAh g –1 with an average voltage of 4.3 V. The discharge capacity gradually decreases during the subsequent cycles. X-ray diffraction and electrochemical impedance spectroscopy measurements reveal that the capacity fading results from the growth of a resistive interfacial layer on the cathode composite. The development of suitable conductive additive and sulfide solid electrolyte materials is essential for the development of high-voltage all solid-state batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Self-citationElectrical Energy Storage and Intercalation Chemistry
Whittingham, M. S. (1976) · Science · doi:10.1126/science.192.4244.1126 · Cited by 1,919
Electrochemical and In Situ X‐Ray Diffraction Studies of Lithium Intercalation in Li x CoO2
Reimers, J. N., & Dahn, J. R. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221184 · Cited by 1,723
Synthesis of layered LiMnO2 as an electrode for rechargeable lithium batteries
Armstrong, A. R., & Bruce, P. G. (1996) · Nature · doi:10.1038/381499a0 · Cited by 1,438
Electrochemistry and Structural Chemistry of LiNiO2 (R3m) for 4 Volt Secondary Lithium Cells
Ohzuku, T., Ueda, A., & Nagayama, M. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220730 · Cited by 1,384
Ohta, N., Takada, K., Zhang, L., Ma, R., Osada, M., & Sasaki, T. (2006) · Advanced Materials · doi:10.1002/adma.200502604 · Cited by 899
First Principles Study of the Li10GeP2S12 Lithium Super Ionic Conductor Material
Mo, Y., Ong, S. P., & Ceder, G. (2012) · Chemistry of Materials · doi:10.1021/cm203303y · Cited by 805
Capacity Fading on Cycling of 4 V Li / LiMn2 O 4 Cells
Xia, Y., Zhou, Y., & Yoshio, M. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837870 · Cited by 763
Solid Electrolyte: the Key for High‐Voltage Lithium Batteries
Li, J., Ma, C., Chi, M., Liang, C., & Dudney, N. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401408 · Cited by 721
A perspective on the high-voltage LiMn1.5Ni0.5O4 spinel cathode for lithium-ion batteries
Manthiram, A., Chemelewski, K., & Lee, E.-S. (2014) · Energy & Environmental Science · doi:10.1039/c3ee42981d · Cited by 625
Cited by
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Chen, R., Li, Q., Yu, X., Chen, L., & Li, H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00268 · Cited by 1,678
Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes
Banerjee, A., Wang, X., Fang, C., Wu, E. A., & Meng, Y. S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00101 · Cited by 1,526
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Understanding interface stability in solid-state batteries
Xiao, Y., Wang, Y., Bo, S.-H., Kim, J. C., Miara, L. J., & Ceder, G. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0157-5 · Cited by 1,219
Electrochemical Impedance Spectroscopy of Metal Oxide Electrodes for Energy Applications
Bredar, A. R. C., Chown, A. L., Burton, A. R., & Farnum, B. H. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01965 · Cited by 1,035
Koerver, R., Aygün, I., Leichtweiß, T., Dietrich, C., Zhang, W., Binder, J. O., Hartmann, P., Zeier, W. G., & Janek, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00931 · Cited by 1,020
Practical Challenges and Future Perspectives of All-Solid-State Lithium-Metal Batteries
Xia, S., Wu, X., Zhang, Z., Cui, Y., & Liu, W. (2019) · Chem · doi:10.1016/j.chempr.2018.11.013 · Cited by 942
Kim, K. J., Balaish, M., Wadaguchi, M., Kong, L., & Rupp, J. L. M. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002689 · Cited by 806
Air-stable Li3InCl6 electrolyte with high voltage compatibility for all-solid-state batteries
Li, X., Liang, J., Luo, J., Norouzi Banis, M., Wang, C., Li, W., Deng, S., Yu, C., Zhao, F., Hu, Y., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02311a · Cited by 753
Interfaces in Solid-State Lithium Batteries
Xu, L., Tang, S., Cheng, Y., Wang, K., Liang, J., Liu, C., Cao, Y.-C., Wei, F., & Mai, L. (2018) · Joule · doi:10.1016/j.joule.2018.07.009 · Cited by 702
Chen, S., Xie, D., Liu, G., Mwizerwa, J. P., Zhang, Q., Zhao, Y., Xu, X., & Yao, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.020 · Cited by 696
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
Interface Issues and Challenges in All‐Solid‐State Batteries: Lithium, Sodium, and Beyond
Lou, S., Zhang, F., Fu, C., Chen, M., Ma, Y., Yin, G., & Wang, J. (2021) · Advanced Materials · doi:10.1002/adma.202000721 · Cited by 548
Zhang, W., Weber, D. A., Weigand, H., Arlt, T., Manke, I., Schröder, D., Koerver, R., Leichtweiss, T., Hartmann, P., Zeier, W. G., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01137 · Cited by 538
Solid-state lithium batteries: Safety and prospects
Guo, Y., Wu, S., He, Y.-B., Kang, F., Chen, L., Li, H., & Yang, Q.-H. (2022) · eScience · doi:10.1016/j.esci.2022.02.008 · Cited by 507
Wang, C., Liang, J., Zhao, Y., Zheng, M., Li, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00551k · Cited by 489
Li, W., Dolocan, A., Oh, P., Celio, H., Park, S., Cho, J., & Manthiram, A. (2017) · Nature Communications · doi:10.1038/ncomms14589 · Cited by 466
Mechanisms and properties of ion-transport in inorganic solid electrolytes
Zhang, B., Tan, R., Yang, L., Zheng, J., Zhang, K., Mo, S., Lin, Z., & Pan, F. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.08.015 · Cited by 464
Computation-Accelerated Design of Materials and Interfaces for All-Solid-State Lithium-Ion Batteries
Nolan, A. M., Zhu, Y., He, X., Bai, Q., & Mo, Y. (2018) · Joule · doi:10.1016/j.joule.2018.08.017 · Cited by 398
The Detrimental Effects of Carbon Additives in Li10GeP2S12-Based Solid-State Batteries
Zhang, W., Leichtweiß, T., Culver, S. P., Koerver, R., Das, D., Weber, D. A., Zeier, W. G., & Janek, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11530 · Cited by 392
Kim, S., Oguchi, H., Toyama, N., Sato, T., Takagi, S., Otomo, T., Arunkumar, D., Kuwata, N., Kawamura, J., & Orimo, S.-I. (2019) · Nature Communications · doi:10.1038/s41467-019-09061-9 · Cited by 381
Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries
Huang, Y., Dong, Y., Li, S., Lee, J., Wang, C., Zhu, Z., Xue, W., Li, Y., & Li, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000997 · Cited by 374
All-Solid-State Lithium Batteries with Sulfide Electrolytes and Oxide Cathodes
Wu, J., Shen, L., Zhang, Z., Liu, G., Wang, Z., Zhou, D., Wan, H., Xu, X., & Yao, X. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00081-4 · Cited by 373
Culver, S. P., Koerver, R., Zeier, W. G., & Janek, J. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900626 · Cited by 342
Zhang, W., Richter, F. H., Culver, S. P., Leichtweiss, T., Lozano, J. G., Dietrich, C., Bruce, P. G., Zeier, W. G., & Janek, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05132 · Cited by 334
Electrolyte/Electrode Interfaces in All-Solid-State Lithium Batteries: A Review
Pang, Y., Pan, J., Yang, J., Zheng, S., & Wang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00092-1 · Cited by 313
Du, M., Liao, K., Lu, Q., & Shao, Z. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00515c · Cited by 306
Antiperovskite Electrolytes for Solid-State Batteries
Xia, W., Zhao, Y., Zhao, F., Adair, K., Zhao, R., Li, S., Zou, R., Zhao, Y., & Sun, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00594 · Cited by 288
Redox-active cathode interphases in solid-state batteries
Koerver, R., Walther, F., Aygün, I., Sann, J., Dietrich, C., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07641j · Cited by 287
Zhang, Y., Lu, W., Cong, L., Liu, J., Sun, L., Mauger, A., Julien, C. M., Xie, H., & Liu, J. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.02.090 · Cited by 284
Zhang, Z., Chen, S., Yang, J., Wang, J., Yao, L., Yao, X., Cui, P., & Xu, X. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16176 · Cited by 281
Progress in solid electrolytes toward realizing solid-state lithium batteries
Takada, K. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.003 · Cited by 279
Nie, K., Hong, Y., Qiu, J., Li, Q., Yu, X., Li, H., & Chen, L. (2018) · Frontiers in Chemistry · doi:10.3389/fchem.2018.00616 · Cited by 278
Building Better Batteries in the Solid State: A Review
Mauger, A., Julien, C. M., Paolella, A., Armand, M., & Zaghib, K. (2019) · Materials · doi:10.3390/ma12233892 · Cited by 277
Heubner, C., Maletti, S., Auer, H., Hüttl, J., Voigt, K., Lohrberg, O., Nikolowski, K., Partsch, M., & Michaelis, A. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106608 · Cited by 277
Designing Cathodes and Cathode Active Materials for Solid‐State Batteries
Minnmann, P., Strauss, F., Bielefeld, A., Ruess, R., Adelhelm, P., Burkhardt, S., Dreyer, S. L., Trevisanello, E., Ehrenberg, H., Brezesinski, T., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201425 · Cited by 277
Liang, Y., Liu, H., Wang, G., Wang, C., Ni, Y., Nan, C., & Fan, L. (2022) · InfoMat · doi:10.1002/inf2.12292 · Cited by 273
Boaretto, N., Garbayo, I., Valiyaveettil-SobhanRaj, S., Quintela, A., Li, C., Casas-Cabanas, M., & Aguesse, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229919 · Cited by 271
Li, X., Ren, Z., Norouzi Banis, M., Deng, S., Zhao, Y., Sun, Q., Wang, C., Yang, X., Li, W., Liang, J., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01676 · Cited by 263
Metadata
- Authors
- Oh, G., Hirayama, M., Kwon, O., Suzuki, K., & Kanno, R.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-04-12
- Volume
- 28
- Issue
- 8
- Pages
- 2634-2640
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2329970688
- Cited by
- 278
- References
- 13
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.