The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Impact of Microcrack Generation and Surface Degradation on a Nickel-Rich Layered Li[Ni0.9Co0.05Mn0.05]O2 Cathode for Lithium-Ion Batteries
Abstract
To address the growing demand for energy density, the Ni-rich layered [Ni 0.90 Co 0.05 Mn 0.05 ]O 2 cathode has been synthesized and its electrochemical performance in lithium-ion cells has been benchmarked against a lower-Ni content Li[Ni 0.6 Co 0.2 Mn 0.2 ]O 2 cathode. Li[Ni 0.90 Co 0.05 Mn 0.05 ]O 2 delivers a high discharge capacity of 227 mA h g –1 compared to a capacity of 189 mA h g –1 for Li[Ni 0.6 Co 0.2 Mn 0.2 ]O 2 when cycled up to a lower cutoff voltage of 4.3 V, making it an appealing candidate for electric vehicles. With an increase in the charge cutoff voltage to 4.5 V, Li[Ni 0.90 Co 0.05 Mn 0.05 ]O 2 displays a capacity of 238 mA h g –1 compared to a capacity of 208 mA h g –1 for Li[Ni 0.6 Co 0.2 Mn 0.2 ]O 2 . Although Li[Ni 0.90 Co 0.05 Mn 0.05 ]O 2 suffers during cycling from the usual rapid capacity fade in a manner similar to that of LiNiO 2, 87 and 81% of the initial capacity could still be retained after 100 cycles even after cycling to higher cutoff voltages of 4.3 and 4.5 V, respectively. A comparison of Li[Ni 0.90 Co 0.05 Mn 0.05 ]O 2 and Li[Ni 0.6 Co 0.2 Mn 0.2 ]O 2 reveals that the capacity fade of Li[Ni 0.90 Co 0.05 Mn 0.05 ]O 2 originates largely from the anisotropic volume change and subsequent microcrack propagation in the bulk and NiO-like rock salt impurity phase formation on the particle surface, which are exacerbated at 4.5 V. Future work with appropriate doping and surface modification could improve further the performance of Li[Ni 0.90 Co 0.05 Mn 0.05 ]O 2 .
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Cabana, J., Monconduit, L., Larcher, D., & Palacín, M. R. (2010) · Advanced Materials · doi:10.1002/adma.201090116 · Cited by 2,442
Noh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
Electrochemistry and Structural Chemistry of LiNiO2 (R3m) for 4 Volt Secondary Lithium Cells
Ohzuku, T., Ueda, A., & Nagayama, M. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220730 · Cited by 1,384
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Self-citationPerformance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries
Shaju, K. M., Subba Rao, G. V., & Chowdari, B. V. R. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00593-5 · Cited by 988
Future generations of cathode materials: an automotive industry perspective
Andre, D., Kim, S.-J., Lamp, P., Lux, S. F., Maglia, F., Paschos, O., & Stiaszny, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00361j · Cited by 806
In situ x-ray diffraction and electrochemical studies of Li1−xNiO2
LI, W., Reimers, J. N., & Dahn, J. R. (1993) · Solid State Ionics · doi:10.1016/0167-2738(93)90317-v · Cited by 745
Kondrakov, A. O., Schmidt, A., Xu, J., Geßwein, H., Mönig, R., Hartmann, P., Sommer, H., Brezesinski, T., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12885 · Cited by 701
Li, W., Dolocan, A., Oh, P., Celio, H., Park, S., Cho, J., & Manthiram, A. (2017) · Nature Communications · doi:10.1038/ncomms14589 · Cited by 466
Self-citation
Cited by
Ryu, H.-H., Park, K.-J., Yoon, C. S., & Sun, Y.-K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b05269 · Cited by 1,629
Electrode Degradation in Lithium-Ion Batteries
Pender, J. P., Jha, G., Youn, D. H., Ziegler, J. M., Andoni, I., Choi, E. J., Heller, A., Dunn, B. S., Weiss, P. S., Penner, R. M., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b04365 · Cited by 873
Jiang, M., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202103005 · Cited by 720
There and Back Again—The Journey of LiNiO2 as a Cathode Active Material
Bianchini, M., Roca‐Ayats, M., Hartmann, P., Brezesinski, T., & Janek, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201812472 · Cited by 670
Yang, H., Wu, H., Ge, M., Li, L., Yuan, Y., Yao, Q., Chen, J., Xia, L., Zheng, J., Chen, Z., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808825 · Cited by 630
de Biasi, L., Schwarz, B., Brezesinski, T., Hartmann, P., Janek, J., & Ehrenberg, H. (2019) · Advanced Materials · doi:10.1002/adma.201900985 · Cited by 539
Park, K., Jung, H., Kuo, L., Kaghazchi, P., Yoon, C. S., & Sun, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801202 · Cited by 502
Ou, X., Liu, T., Zhong, W., Fan, X., Guo, X., Huang, X., Cao, L., Hu, J., Zhang, B., Chu, Y. S., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-30020-4 · Cited by 454
Maleki Kheimeh Sari, H., & Li, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901597 · Cited by 403
Choi, J. U., Voronina, N., Sun, Y., & Myung, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002027 · Cited by 394
Liu, J., Wang, J., Ni, Y., Zhang, K., Cheng, F., & Chen, J. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.028 · Cited by 349
Mao, Y., Wang, X., Xia, S., Zhang, K., Wei, C., Bak, S., Shadike, Z., Liu, X., Yang, Y., Xu, R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900247 · Cited by 339
Impact of Cathode Material Particle Size on the Capacity of Bulk-Type All-Solid-State Batteries
Strauss, F., Bartsch, T., de Biasi, L., Kim, A.-Y., Janek, J., Hartmann, P., & Brezesinski, T. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00275 · Cited by 334
Chakraborty, A., Kunnikuruvan, S., Kumar, S., Markovsky, B., Aurbach, D., Dixit, M., & Major, D. T. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b04066 · Cited by 322
Xu, G., Liu, X., Daali, A., Amine, R., Chen, Z., & Amine, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004748 · Cited by 313
A highly stabilized Ni-rich NCA cathode for high-energy lithium-ion batteries
Ryu, H.-H., Park, N.-Y., Seo, J. H., Yu, Y.-S., Sharma, M., Mücke, R., Kaghazchi, P., Yoon, C. S., & Sun, Y.-K. (2020) · Materials Today · doi:10.1016/j.mattod.2020.01.019 · Cited by 264
Rational design of mechanically robust Ni-rich cathode materials via concentration gradient strategy
Liu, T., Yu, L., Lu, J., Zhou, T., Huang, X., Cai, Z., Dai, A., Gim, J., Ren, Y., Xiao, X., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-26290-z · Cited by 260
Metadata
- Authors
- Sun, H.-H., & Manthiram, A.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-09-27
- Volume
- 29
- Issue
- 19
- Pages
- 8486-8493
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2753992040
- Cited by
- 465
- References
- 23
- FWCI
- 16.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.