The DOI matches its Crossref record; 318 of the 318 references it cites were found in a registry or an index.
Promises and Challenges of Next-Generation “Beyond Li-ion” Batteries for Electric Vehicles and Grid Decarbonization
Open accessAbstract
The tremendous improvement in performance and cost of lithium-ion batteries (LIBs) have made them the technology of choice for electrical energy storage. While established battery chemistries and cell architectures for Li-ion batteries achieve good power and energy density, LIBs are unlikely to meet all the performance, cost, and scaling targets required for energy storage, in particular, in large-scale applications such as electrified transportation and grids. The demand to further reduce cost and/or increase energy density, as well as the growing concern related to natural resource needs for Li-ion have accelerated the investigation of so-called "beyond Li-ion" technologies. In this review, we will discuss the recent achievements, challenges, and opportunities of four important "beyond Li-ion" technologies: Na-ion batteries, K-ion batteries, all-solid-state batteries, and multivalent batteries. The fundamental science behind the challenges, and potential solutions toward the goals of a low-cost and/or high-energy-density future, are discussed in detail for each technology. While it is unlikely that any given new technology will fully replace Li-ion in the near future, "beyond Li-ion" technologies should be thought of as opportunities for energy storage to grow into mid/large-scale applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–318 of 318
Exceptional Superionic Conductivity in Disordered Sodium Decahydro‐closo‐decaborate
Udovic, T. J., Matsuo, M., Tang, W. S., Wu, H., Stavila, V., Soloninin, A. V., Skoryunov, R. V., Babanova, O. A., Skripov, A. V., Rush, J. J., et al. (2014) · Advanced Materials · doi:10.1002/adma.201403157 · Cited by 271
High-resolution electron microscopy studies of non-graphitizing carbons
Harris, P. J. F., & Tsang, S. C. (1997) · Philosophical Magazine A · doi:10.1080/01418619708214028 · Cited by 268
Jiang, Z., Wang, S., Chen, X., Yang, W., Yao, X., Hu, X., Han, Q., & Wang, H. (2020) · Advanced Materials · doi:10.1002/adma.201906221 · Cited by 266
A zero-strain insertion cathode material of nickel ferricyanide for sodium-ion batteries
You, Y., Wu, X.-L., Yin, Y.-X., & Guo, Y.-G. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13223d · Cited by 265
Wang, P.-F., You, Y., Yin, Y.-X., & Guo, Y.-G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07589d · Cited by 262
Lee, E., Brown, D. E., Alp, E. E., Ren, Y., Lu, J., Woo, J.-J., & Johnson, C. S. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02918 · Cited by 256
Strategies Based on Nitride Materials Chemistry to Stabilize Li Metal Anode
Zhu, Y., He, X., & Mo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600517 · Cited by 254
Ling, C., Chen, J., & Mizuno, F. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4078689 · Cited by 252
Miara, L., Windmüller, A., Tsai, C.-L., Richards, W. D., Ma, Q., Uhlenbruck, S., Guillon, O., & Ceder, G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09059 · Cited by 251
Self-citationWhat factors determine cation coordination numbers?
Brown, I. D. (1988) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768188007712 · Cited by 250
Structure of non-graphitising carbons
Harris, P. J. F. (1997) · International Materials Reviews · doi:10.1179/095066097790093172 · Cited by 249
Novel Potassium-Ion Hybrid Capacitor Based on an Anode of K2Ti6O13 Microscaffolds
Dong, S., Li, Z., Xing, Z., Wu, X., Ji, X., & Zhang, X. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b15314 · Cited by 248
Yabuuchi, N., & Komaba, S. (2014) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/15/4/043501 · Cited by 244
Na3V2(PO4)2F3 Revisited: A High-Resolution Diffraction Study
Bianchini, M., Brisset, N., Fauth, F., Weill, F., Elkaim, E., Suard, E., Masquelier, C., & Croguennec, L. (2014) · Chemistry of Materials · doi:10.1021/cm501644g · Cited by 240
The Interplay of Al and Mg Speciation in Advanced Mg Battery Electrolyte Solutions
See, K. A., Chapman, K. W., Zhu, L., Wiaderek, K. M., Borkiewicz, O. J., Barile, C. J., Chupas, P. J., & Gewirth, A. A. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10987 · Cited by 238
Materials design of ionic conductors for solid state batteries
Ohno, S., Banik, A., Dewald, G. F., Kraft, M. A., Krauskopf, T., Minafra, N., Till, P., Weiss, M., & Zeier, W. G. (2020) · Progress in Energy · doi:10.1088/2516-1083/ab73dd · Cited by 238
High Capacity O3-Type Na[Li0.05(Ni0.25Fe0.25Mn0.5)0.95]O2 Cathode for Sodium Ion Batteries
Oh, S.-M., Myung, S.-T., Hwang, J.-Y., Scrosati, B., Amine, K., & Sun, Y.-K. (2014) · Chemistry of Materials · doi:10.1021/cm502481b · Cited by 237
Self-citationQi, Y., Mu, L., Zhao, J., Hu, Y., Liu, H., & Dai, S. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503188 · Cited by 235
All-Solid-State Batteries with Thick Electrode Configurations
Kato, Y., Shiotani, S., Morita, K., Suzuki, K., Hirayama, M., & Kanno, R. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b02880 · Cited by 234
Hautier, G., Jain, A., Chen, H., Moore, C., Ong, S. P., & Ceder, G. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12216a · Cited by 231
Self-citationExploring the Economic Potential of Sodium-Ion Batteries
Peters, J. F., Peña Cruz, A., & Weil, M. (2019) · Batteries · doi:10.3390/batteries5010010 · Cited by 229
Swamy, T., Park, R., Sheldon, B. W., Rettenwander, D., Porz, L., Berendts, S., Uecker, R., Carter, W. C., & Chiang, Y.-M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1391814jes · Cited by 227
Xiong, P., Bai, P., Tu, S., Cheng, M., Zhang, J., Sun, J., & Xu, Y. (2018) · Small · doi:10.1002/smll.201802140 · Cited by 226
Chu, I.-H., Nguyen, H., Hy, S., Lin, Y.-C., Wang, Z., Xu, Z., Deng, Z., Meng, Y. S., & Ong, S. P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00833 · Cited by 225
Complex Hydrides with (BH4)− and (NH2)− Anions as New Lithium Fast-Ion Conductors
Matsuo, M., Remhof, A., Martelli, P., Caputo, R., Ernst, M., Miura, Y., Sato, T., Oguchi, H., Maekawa, H., Takamura, H., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja907249p · Cited by 224
Characterization of mechanical degradation in an all-solid-state battery cathode
Shi, T., Zhang, Y.-Q., Tu, Q., Wang, Y., Scott, M. C., & Ceder, G. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta06985j · Cited by 224
Self-citationYu, Z., Shang, S., Seo, J., Wang, D., Luo, X., Huang, Q., Chen, S., Lu, J. B., Li, X., Liu, Z., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605561 · Cited by 220
All-in-one improvement toward Li6PS5Br-Based solid electrolytes triggered by compositional tune
Zhang, Z., Zhang, L., Yan, X., Wang, H., Liu, Y., Yu, C., Cao, X., van Eijck, L., & Wen, B. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.11.016 · Cited by 215
Additional Sodium Insertion into Polyanionic Cathodes for Higher‐Energy Na‐Ion Batteries
Bianchini, M., Xiao, P., Wang, Y., & Ceder, G. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700514 · Cited by 211
Self-citationPrussian white analogues as promising cathode for non-aqueous potassium-ion batteries
Wu, X., Jian, Z., Li, Z., & Ji, X. (2017) · Electrochemistry Communications · doi:10.1016/j.elecom.2017.02.012 · Cited by 207
Cathode properties of Na3M2(PO4)2F3 [M = Ti, Fe, V] for sodium-ion batteries
Chihara, K., Kitajou, A., Gocheva, I. D., Okada, S., & Yamaki, J.-I. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.034 · Cited by 203
Interfacial phenomena in solid-state lithium battery with sulfide solid electrolyte
Takada, K., Ohta, N., Zhang, L., Xu, X., Hang, B. T., Ohnishi, T., Osada, M., & Sasaki, T. (2012) · Solid State Ionics · doi:10.1016/j.ssi.2012.01.009 · Cited by 202
Besenhard, J. O., & Winter, M. (2002) · ChemPhysChem · Cited by 201
Direct Observation of Reversible Magnesium Ion Intercalation into a Spinel Oxide Host
Kim, C., Phillips, P. J., Key, B., Yi, T., Nordlund, D., Yu, Y., Bayliss, R. D., Han, S., He, M., Zhang, Z., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500083 · Cited by 200
Lun, Z., Ouyang, B., Kitchaev, D. A., Clément, R. J., Papp, J. K., Balasubramanian, M., Tian, Y., Lei, T., Shi, T., McCloskey, B. D., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802959 · Cited by 200
Self-citationTang, W. S., Yoshida, K., Soloninin, A. V., Skoryunov, R. V., Babanova, O. A., Skripov, A. V., Dimitrievska, M., Stavila, V., Orimo, S.-I., & Udovic, T. J. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00310 · Cited by 199
Perspectives on Cobalt Supply through 2030 in the Face of Changing Demand
Fu, X., Beatty, D. N., Gaustad, G. G., Ceder, G., Roth, R., Kirchain, R. E., Bustamante, M., Babbitt, C., & Olivetti, E. A. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.9b04975 · Cited by 198
Self-citationA New Strategy for High‐Voltage Cathodes for K‐Ion Batteries: Stoichiometric KVPO4F
Kim, H., Seo, D., Bianchini, M., Clément, R. J., Kim, H., Kim, J. C., Tian, Y., Shi, T., Yoon, W., & Ceder, G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801591 · Cited by 193
Self-citationSodium storage in hard carbon with curved graphene platelets as the basic structural units
Wang, K., Xu, Y., Li, Y., Dravid, V. P., Wu, J., & Huang, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11510a · Cited by 189
Material design of new lithium ionic conductor, thio-LISICON, in the Li2S?P2S5 system
Murayama, M., Sonoyama, N., Yamada, A., & Kanno, R. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2004.02.025 · Cited by 188
Design Principles for High-Capacity Mn-Based Cation-Disordered Rocksalt Cathodes
Lun, Z., Ouyang, B., Cai, Z., Clément, R. J., Kwon, D.-H., Huang, J., Papp, J. K., Balasubramanian, M., Tian, Y., McCloskey, B. D., et al. (2020) · Chem · doi:10.1016/j.chempr.2019.10.001 · Cited by 188
Self-citationRechargeable Electrodes from Sodium Cobalt Bronzes
Shacklette, L. W., Jow, T. R., & Townsend, L. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095407 · Cited by 186
Electrochemical insertion of lithium, sodium, and magnesium in molybdenum(VI) oxide
Spahr, M. E., Novák, P., Haas, O., & Nesper, R. (1995) · Journal of Power Sources · doi:10.1016/0378-7753(94)02099-o · Cited by 182
Gu, Y., Katsura, Y., Yoshino, T., Takagi, H., & Taniguchi, K. (2015) · Scientific Reports · doi:10.1038/srep12486 · Cited by 182
Wu, N., Yang, Z., Yao, H., Yin, Y., Gu, L., & Guo, Y. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201501005 · Cited by 180
Yi, E., Wang, W., Kieffer, J., & Laine, R. M. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04492a · Cited by 178
K2Ti4O9: A Promising Anode Material for Potassium Ion Batteries
Kishore, B., G, V., & Munichandraiah, N. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0421613jes · Cited by 178
A highly stable sodium solid-state electrolyte based on a dodeca/deca-borate equimolar mixture
Duchêne, L., Kühnel, R.-S., Rentsch, D., Remhof, A., Hagemann, H., & Battaglia, C. (2017) · Chemical Communications · doi:10.1039/c7cc00794a · Cited by 177
Atomic Layer Deposition of the Solid Electrolyte Garnet Li7La3Zr2O12
Kazyak, E., Chen, K.-H., Wood, K. N., Davis, A. L., Thompson, T., Bielinski, A. R., Sanchez, A. J., Wang, X., Wang, C., Sakamoto, J., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00944 · Cited by 177
Chen, R.-J., Zhang, Y.-B., Liu, T., Xu, B.-Q., Lin, Y.-H., Nan, C.-W., & Shen, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16304 · Cited by 176
Sodium superionic conduction in Na₂B₁₂H₁₂
Udovic, T. J., Matsuo, M., Unemoto, A., et al. (2014) · Chemical Communications · Cited by 174
Reactivity-Guided Interface Design in Na Metal Solid-State Batteries
Tian, Y., Sun, Y., Hannah, D. C., Xiao, Y., Liu, H., Chapman, K. W., Bo, S.-H., & Ceder, G. (2019) · Joule · doi:10.1016/j.joule.2018.12.019 · Cited by 172
Self-citationXie, F., Liu, C., Li, S., Lin, Z., & Huang, Y. (2018) · Transportation Research Part E: Logistics and Transportation Review · doi:10.1016/j.tre.2017.11.014 · Cited by 171
Evaluation of sulfur spinel compounds for multivalent battery cathode applications
Liu, M., Jain, A., Rong, Z., Qu, X., Canepa, P., Malik, R., Ceder, G., & Persson, K. A. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01731b · Cited by 164
Self-citationDing, J. J., Zhou, Y. N., Sun, Q., Yu, X. Q., Yang, X. Q., & Fu, Z. W. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2012.09.058 · Cited by 163
Cryogenic Focused Ion Beam Characterization of Lithium Metal Anodes
Lee, J. Z., Wynn, T. A., Schroeder, M. A., Alvarado, J., Wang, X., Xu, K., & Meng, Y. S. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02381 · Cited by 162
Lacivita, V., Wang, Y., Bo, S.-H., & Ceder, G. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10498k · Cited by 160
Self-citationStoichiometric Layered Potassium Transition Metal Oxide for Rechargeable Potassium Batteries
Kim, H., Seo, D.-H., Urban, A., Lee, J., Kwon, D.-H., Bo, S.-H., Shi, T., Papp, J. K., McCloskey, B. D., & Ceder, G. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03228 · Cited by 159
Self-citationHard Carbon Anodes for Na‐Ion Batteries: Toward a Practical Use
Hasegawa, G., Kanamori, K., Kannari, N., Ozaki, J., Nakanishi, K., & Abe, T. (2015) · ChemElectroChem · doi:10.1002/celc.201500412 · Cited by 158
Taylor, N. J., Stangeland‐Molo, S., Haslam, C. G., Sharafi, A., Thompson, T., Wang, M. J., García-Méndez, R., & Sakamoto, J. S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.06.055 · Cited by 156
Solvation structure and energetics of electrolytes for multivalent energy storage
Lapidus, S. H., Rajput, N. N., Qu, X., Chapman, K. W., Persson, K. A., & Chupas, P. J. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp03015j · Cited by 154
Self-citationHasa, I., Passerini, S., & Hassoun, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08667e · Cited by 153
Red Phosphorus Potassium‐Ion Battery Anodes
Chang, W., Wu, J., Chen, K., & Tuan, H. (2019) · Advanced Science · doi:10.1002/advs.201801354 · Cited by 151
Mg Cathode Materials and Electrolytes for Rechargeable Mg Batteries: A Review
Ma, Z., MacFarlane, D. R., & Kar, M. (2019) · Batteries & Supercaps · doi:10.1002/batt.201800102 · Cited by 147
Mechanical properties of sulfide glasses in all-solid-state batteries
Kato, A., Nose, M., Yamamoto, M., Sakuda, A., Hayashi, A., & Tatsumisago, M. (2018) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.18022 · Cited by 146
Development of the cold sintering process and its application in solid-state lithium batteries
Liu, Y., Sun, Q., Wang, D., Adair, K. R., Liang, J., & Sun, X. A. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.015 · Cited by 145
Non-aqueous potassium-ion batteries: a review
Vaalma, C., Buchholz, D., & Passerini, S. (2018) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2018.03.031 · Cited by 144
Sodium‐Ion Storage in Pyroprotein‐Based Carbon Nanoplates
Yun, Y. S., Park, K., Lee, B., Cho, S. Y., Park, Y., Hong, S. J., Kim, B. H., Gwon, H., Kim, H., Lee, S., et al. (2015) · Advanced Materials · doi:10.1002/adma.201502303 · Cited by 143
Self-citationMechanical properties of the solid Li-ion conducting electrolyte: Li0.33La0.57TiO3
Cho, Y., Wolfenstine, J., Rangasamy, E., Kim, H., Choe, H., & Sakamoto, J. S. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6500-5 · Cited by 143
Self-citationChen, H., Hautier, G., & Ceder, G. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3040834 · Cited by 140
Self-citationComputational and Experimental Investigations of Na-Ion Conduction in Cubic Na3PSe4
Bo, S., Wang, Y. E., Kim, J. C., Richards, W. D., & Ceder, G. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04013 · Cited by 137
Self-citationLi, H., Bai, Y., Wu, F., Ni, Q., & Wu, C. K. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09898 · Cited by 137
Wu, E. A., Kompella, C. S., Zhu, Z., Lee, J. Z., Lee, S. C., Chu, I., Nguyen, H., Ong, S. P., Banerjee, A., & Meng, Y. S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19037 · Cited by 136
Levi, E., Lancry, E., Mitelman, A., Aurbach, D., Ceder, G., Morgan, D. D., & Isnard, O. (2006) · Chemistry of Materials · doi:10.1021/cm061656f · Cited by 135
Self-citationAtomic Layer Deposition of Lithium Phosphorus Oxynitride
Nisula, M., Shindo, Y., Koga, H., & Karppinen, M. J. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02199 · Cited by 135
Zakharkin, M. V., Drozhzhin, O. A., Tereshchenko, I. V., Chernyshov, D., Abakumov, A. M., Antipov, E. V., & Stevenson, K. J. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b01269 · Cited by 133
Towards an atomistic understanding of disordered carbon electrode materials
Deringer, V. L., Merlet, C., Hu, Y., Lee, T. H., Kattirtzi, J. A., Pecher, O., Cśanyi, G., Elliott, S. R., & Grey, C. P. (2018) · Chemical Communications · doi:10.1039/c8cc01388h · Cited by 131
Improved Electrolyte Solutions for Rechargeable Magnesium Batteries
Gofer, Y., Chusid, O., Gizbar, H., Viestfrid, Y., Gottlieb, H. E., Marks, V., & Aurbach, D. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2186003 · Cited by 129
Li4PS4I: A Li+ Superionic Conductor Synthesized by a Solvent-Based Soft Chemistry Approach
Sedlmaier, S. J., Indris, S., Dietrich, C., Yavuz, M., Dräger, C., von Seggern, F., Sommer, H., & Janek, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00013 · Cited by 129
Ban, L. L., Crawford, D., & Marsh, H. (1975) · Journal of Applied Crystallography · doi:10.1107/s0021889875010904 · Cited by 126
Yan, Y., Kühnel, R., Remhof, A., Duchêne, L., Cuervo‐Reyes, E., Rentsch, D., Łodziana, Z., & Battaglia, C. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700294 · Cited by 126
Design of Li 1+2x Zn 1−x PS 4 , a new lithium ion conductor
Richards, W. D., Wang, Y. E., Miara, L. J., Kim, J. C., & Ceder, G. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02094a · Cited by 123
Self-citationZhang, Y., Tian, Y., Xiao, Y., Miara, L. J., Aihara, Y., Tsujimura, T., Shi, T., Scott, M. C., & Ceder, G. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903778 · Cited by 123
Self-citationLi, N., Zhang, F., & Tang, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta07987k · Cited by 122
Niu, J., Gao, H., Ma, W., Luo, F., Yin, K., Peng, Z., & Zhang, Z. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.05.023 · Cited by 116
Hahn, N. T., Seguin, T. J., Lau, K.-C., Liao, C., Ingram, B. J., Persson, K. A., & Zavadil, K. R. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b05967 · Cited by 115
Self-citationYagi, S., Tanaka, A., Ichikawa, Y., Ichitsubo, T., & Matsubara, E. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.033303jes · Cited by 114
Zhu, Z., Chu, I., & Ong, S. P. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04049 · Cited by 113
Choi, Y. E., Park, K. H., Kim, D. H., Oh, D. Y., Kwak, H. R., Lee, Y.-G., & Jung, Y. S. (2017) · ChemSusChem · doi:10.1002/cssc.201700409 · Cited by 110
Structure and Dynamics of Fluorophosphate Na-Ion Battery Cathodes
Dacek, S. T., Richards, W. D., Kitchaev, D. A., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01989 · Cited by 109
Self-citationDiscovery of Calcium‐Metal Alloy Anodes for Reversible Ca‐Ion Batteries
Yao, Z., Hegde, V. I., Aspuru‐Guzik, A., & Wolverton, C. M. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802994 · Cited by 104
Size and charge effects on the structural stability of LiMO2 (M = transition metal) compounds
Wu, E. J., Tepesch, P. D., & Ceder, G. (1998) · Philosophical Magazine B · doi:10.1080/13642819808206403 · Cited by 103
Self-citationElucidating Solvation Structures for Rational Design of Multivalent Electrolytes—A Review
Rajput, N. N., Seguin, T. J., Wood, B. M., Qu, X., & Persson, K. A. (2018) · Topics in Current Chemistry · doi:10.1007/s41061-018-0195-2 · Cited by 103
Self-citationNext-Generation Cathode Materials for Non-aqueous Potassium-Ion Batteries
Kim, H., Ji, H., Wang, J., & Ceder, G. (2019) · Trends in Chemistry · doi:10.1016/j.trechm.2019.04.007 · Cited by 100
Self-citationMurgia, F., Stievano, L., Monconduit, L., & Berthelot, R. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04077a · Cited by 99
Multivalent Batteries—Prospects for High Energy Density: Ca Batteries
Monti, D., Ponrouch, A., Araujo, R. B., Bardé, F., Johansson, P., & Palacín, M. R. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00079 · Cited by 98
A mesoporous antimony-based nanocomposite for advanced sodium ion batteries
Ma, W., Wang, J., Gao, H., Niu, J., Luo, F., Peng, Z., & Zhang, Z. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.01.016 · Cited by 96
Self-citationOn the strange case of divalent ions intercalation in V2O5
Verrelli, R., Black, A. P., Pattanathummasid, C., Tchitchekova, D. S., Ponrouch, A., Oró‐Solé, J., Frontera, C., Bardé, F., Rozier, P., & Palacín, M. R. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.024 · Cited by 95
Saccoccio, M., Yu, J., Lu, Z., Kwok, S. C. T., Wang, J., Yeung, K. K., Yuen, M. M. F., & Francesco Ciucci, A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.08.020 · Cited by 92
Self-citationLing, C., Banerjee, D., Song, W., Zhang, M., & Matsui, M. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm31122d · Cited by 89
Barroso-Luque, L., Tu, Q. H., & Ceder, G. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab6c5b · Cited by 83
Self-citationWang, Y. E., Richards, W. D., Bo, S., Miara, L. J., & Ceder, G. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02476 · Cited by 81
Self-citationTojo, T., Tawa, H., Oshida, N., Inada, R., & Sakurai, Y. (2018) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2018.08.008 · Cited by 77
Liu, T., Zhang, Y., Chen, R., Zhao, S., Lin, Y., Nan, C., & Shen, Y. (2017) · Electrochemistry Communications · doi:10.1016/j.elecom.2017.03.016 · Cited by 76
Prediction of two-dimensional PC 6 as a promising anode material for potassium-ion batteries
Dou, K., Ma, Y., Zhang, T., Huang, B., & Dai, Y. (2019) · Physical Chemistry Chemical Physics · doi:10.1039/c9cp05251h · Cited by 69
Theoretical investigation of Chevrel phase materials for cathodes accommodating Ca2+ ions
Smeu, M., Hossain, M. S., Wang, Z., Timoshevskii, V., Bevan, K. H., & Zaghib, K. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.009 · Cited by 68
Predictive modeling and design rules for solid electrolytes
Ceder, G., Ong, S. P., & Wang, Y. E. (2018) · MRS Bulletin · doi:10.1557/mrs.2018.210 · Cited by 65
Self-citationSicolo, S., Fingerle, M., Hausbrand, R., & Albe, K. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.04.005 · Cited by 64
Manganese Dioxide As Rechargeable Magnesium Battery Cathode
Ling, C., & Zhang, R. (2017) · Frontiers in Energy Research · doi:10.3389/fenrg.2017.00030 · Cited by 64
Chen, T., Gautam, G. S., Huang, W., & Ceder, G. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b04038 · Cited by 64
Self-citationMatsuo, M., Sato, T., Miura, Y., Oguchi, H., Zhou, Y., Maekawa, H., Takamura, H., & Orimo, S. (2010) · Chemistry of Materials · doi:10.1021/cm1006857 · Cited by 55
Plating and Stripping Calcium at Room Temperature in an Ionic-Liquid Electrolyte
Biria, S., Pathreeker, S., Genier, F. S., Li, H., & Hosein, I. D. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b02529 · Cited by 55
Atomic intercalation to measure adhesion of graphene on graphite
Wang, J., Sorescu, D. C., Jeon, S., Belianinov, A., Kalinin, S. V., Baddorf, A. P., & Maksymovych, P. (2016) · Nature Communications · doi:10.1038/ncomms13263 · Cited by 54
Self-citationBianchini, M., Wang, J., Clément, R. J., & Ceder, G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801446 · Cited by 51
Self-citationZeng, G., Caputo, R., Carriazo, D., Luo, L. J., & Niederberger, M. (2013) · Chemistry of Materials · doi:10.1021/cm400995g · Cited by 43
Self-citationFast Mg 2+ diffusion in Mo 3 (PO 4 ) 3 O for Mg batteries
Rong, Z., Xiao, P., Liu, M., Huang, W., Hannah, D. C., Scullin, W., Persson, K. A., & Ceder, G. (2017) · Chemical Communications · doi:10.1039/c7cc02903a · Cited by 31
Self-citationPotassium vanadate K2V3O8 as a superior anode material for potassium-ion batteries
Lu, M., Wang, K., Ke, H.-D., Hu, Q. L., Liu, Z.-H., & Wu, H. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.08.126 · Cited by 24
Pyrophosphates AMoP 2 O 7 (A = Li and Na): Synthesis, structure and electrochemical properties
Panin, R. V., Drozhzhin, O. A., Fedotov, S. S., Suchkova, E. A., Khasanova, N. R., & Antipov, E. V. (2018) · Materials Research Bulletin · doi:10.1016/j.materresbull.2018.06.006 · Cited by 13
Cited by
Shi, P., Ma, J., Liu, M., Guo, S., Huang, Y., Wang, S., Zhang, L., Chen, L., Yang, K., Liu, X., et al. (2023) · Nature Nanotechnology · doi:10.1038/s41565-023-01341-2 · Cited by 578
High-entropy mechanism to boost ionic conductivity
Zeng, Y., Ouyang, B., Liu, J., Byeon, Y.-W., Cai, Z., Miara, L. J., Wang, Y., & Ceder, G. (2022) · Science · doi:10.1126/science.abq1346 · Cited by 558
Self-citationHuang, J., Xie, Y., You, Y., Yuan, J., Xu, Q., Xie, H., & Chen, Y. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213095 · Cited by 448
He, B., Zhang, Q., Pan, Z., Li, L., Li, C., Ling, Y., Wang, Z., Chen, M., Wang, Z., Yao, Y., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00978 · Cited by 390
Self-citationQuilty, C. D., Wu, D., Li, W., Bock, D. C., Wang, L., Housel, L. M., Abraham, A., Takeuchi, K. J., Marschilok, A. C., & Takeuchi, E. S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00214 · Cited by 388
Metadata
- Authors
- Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., Lun, Z., Rong, Z., Persson, K., & Ceder, G.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-12-24
- Volume
- 121
- Issue
- 3
- Pages
- 1623-1669
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W3116578724
- Cited by
- 1,614
- References
- 318
- FWCI
- 6.84
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.