Cited by 349Additive Manufacturing and 3D Printing TechnologiesHeat and Mass Transfer in Porous MediaMesoporous Materials and Catalysis

The DOI matches its Crossref record; 170 of the 171 references it cites were found in a registry or an index.

Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications.

Lawson, Shane, Li, Xin, Thakkar, Harshul, Rownaghi, Ali A., Rezaei, Fateme·2021·Chemical Reviews

DOI 10.1021/acs.chemrev.1c00060

Open this paper in CoChat — free account

Abstract

Porous solids in the form of adsorbents and catalysts play a crucial role in various industrially important chemical, energy, and environmental processes. Formulating them into structured configurations is a key step toward their scale up and successful implementation at the industrial level. Additive manufacturing, also known as 3D printing, has emerged as an invaluable platform for shape engineering porous solids and fabricating scalable configurations for use in a wide variety of separation and reaction applications. However, formulating porous materials into self-standing configurations can dramatically affect their performance and consequently the efficiency of the process wherein they operate. Toward this end, various research groups around the world have investigated the formulation of porous adsorbents and catalysts into structured scaffolds with complex geometries that not only exhibit comparable or improved performance to that of their powder parents but also address the pressure drop and attrition issues of traditional configurations. In this comprehensive review, we summarize the recent advances and current challenges in the field of adsorption and catalysis to better guide the future directions in shape engineering solid materials with a better control on composition, structure, and properties of 3D-printed adsorbents and catalysts.

Integrity signals

Registry

Crossref · 10.1021/acs.chemrev.1c00060

Cites

170 of 170 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,474
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
A short review of recent advances in CO 2 hydrogenation to hydrocarbons over heterogeneous catalysts
Li, W., Wang, H., Jiang, X., Zhu, J., Liu, Z., Guo, X., & Song, C. (2018) · RSC Advances · doi:10.1039/c7ra13546g · Cited by 690
Solid heterogeneous catalysts for transesterification of triglycerides with methanol: A review
Helwani, Z., Othman, M. R., Aziz, N., Kim, J., & Fernando, W. J. N. (2009) · Applied Catalysis A General · doi:10.1016/j.apcata.2009.05.021 · Cited by 614
Monolithic reactors for environmental applications
Avila, P., Montes, M., & Miró, E. E. (2005) · Chemical Engineering Journal · doi:10.1016/j.cej.2005.02.025 · Cited by 539
Metal–organic frameworks meet scalable and sustainable synthesis
Julien, P., Mottillo, C., & Friščić, T. (2017) · Green Chemistry · doi:10.1039/c7gc01078h · Cited by 526
Comparison of Activated Carbon and Zeolite 13X for CO2 Recovery from Flue Gas by Pressure Swing Adsorption
Chue, K.-T., Kim, J. N., Yoo, Y.-J., Cho, S. H., & Yang, R. T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a020 · Cited by 499
A review on inkjet printing of nanoparticle inks for flexible electronics
Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01630a · Cited by 497
3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors
Parra‐Cabrera, C., Achille, C., Kuhn, S., & Ameloot, R. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00631d · Cited by 494
Progress in 3D Printing of Carbon Materials for Energy‐Related Applications
Fu, K. K., Yao, Y., Dai, J., & Hu, L. (2016) · Advanced Materials · doi:10.1002/adma.201603486 · Cited by 486

Show all 171 references

Research works printed but not linked: 3

10.1021/acsami.7b11626 · DOI
10.1016/j.micromeso.2017.07.014 · DOI
10.1016/j.seppur.2009.10.004 · DOI

Sorted by citations

Recent advances in direct air capture by adsorption
Zhu, X., Xie, W., Wu, J., Miao, Y., Xiang, C., Chen, C., Ge, B., Gan, Z., Yang, F., Zhang, M., et al. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00970b · Cited by 468
Ionic Liquids Functionalized MOFs for Adsorption
Li, X., Chen, K., Guo, R., & Wei, Z. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00248 · Cited by 410
Self-citation
A robust and 3D-printed solar evaporator based on naturally occurring molecules
Zhang, X., Yu, Y., Li, N., Yang, P., Yang, Y., Duan, G., Wang, X., Li, Y., & Li, Y. (2023) · 中国科学通报：英文版 · doi:10.1016/j.scib.2023.01.017 · Cited by 186
Understanding Synthesis–Structure–Performance Correlations of Nanoarchitectured Activated Carbons for Electrochemical Applications and Carbon Capture
Zhang, S., Zheng, M., Tang, Y., Zang, R., Zhang, X., Huang, X., Chen, Y., Yamauchi, Y., Kaskel, S., & Pang, H. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202204714 · Cited by 180
Synthesis and shaping of metal–organic frameworks: a review
Li, Y., Wen, G., Li, J., Li, Q., Zhang, H., Tao, B., & Zhang, J. (2022) · Chemical Communications · doi:10.1039/d2cc04190a · Cited by 161
Shaping of Metal–Organic Frameworks: A Review
Wang, Z., Liu, L., Li, Z., Goyal, N., Du, T., He, J., & Li, G. K. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c03426 · Cited by 159
Multifunctional Hydroxyapatite Composites for Orthopedic Applications: A Review
George, S. M., Nayak, C., Singh, I., & Balani, K. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00140 · Cited by 157
Evaluation of amine-based solid adsorbents for direct air capture: a critical review
Panda, D., Kulkarni, V., & Singh, S. K. (2022) · Reaction Chemistry & Engineering · doi:10.1039/d2re00211f · Cited by 116
3D printing of hydrogels for flexible micro‐supercapacitors
Baig, M. M., Khan, S. A., Ahmad, H., Liang, J., Zhu, G., Pang, H., & Zhang, Y. (2024) · FlexMat. · doi:10.1002/flm2.14 · Cited by 111
Binder-free Three-dimensional (3D) printing of Cellulose-ZIF8 (CelloZIF-8) for water treatment and carbon dioxide (CO2) adsorption
Abdelhamid, H. N., Sultan, S., & Mathew, A. P. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.143567 · Cited by 108
3D-Printed MOF Monoliths: Fabrication Strategies and Environmental Applications
Molavi, H., Mirzaei, K., Barjasteh, M., Rahnamaee, S. Y., Saeedi, S., Hassanpouryouzband, A., & Rezakazemi, M. (2024) · Nano-Micro Letters · doi:10.1007/s40820-024-01487-1 · Cited by 107
Recent advances and challenges in solid sorbents for CO2 capture
Zentou, H., Hoque, B., Abdalla, M. A., Saber, A. F., Abdelaziz, O. Y., Aliyu, M., Alkhedhair, A. M., Alabduly, A. J., & Abdelnaby, M. M. (2025) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2025.100386 · Cited by 95
Recent advances in environmental and agricultural applications of hydrochars: A review
Al-Nuaimy, M. N. M., Azizi, N., Nural, Y., & Yabalak, E. (2023) · Environmental Research · doi:10.1016/j.envres.2023.117923 · Cited by 94
3D Printing Flexible Sodium‐Ion Microbatteries with Ultrahigh Areal Capacity and Robust Rate Capability
Ma, J., Zheng, S., Chi, L., Liu, Y., Zhang, Y., Wang, K., & Wu, Z. (2022) · Advanced Materials · doi:10.1002/adma.202205569 · Cited by 88
Shaping techniques of adsorbents and their applications in gas separation: a review
Wu, J., Zhu, X., Yang, F., Wang, R. Z., & Ge, T. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta04352a · Cited by 88
An Overview on 3D Printing of Structured Porous Materials and Their Applications
Gao, Y., Lalevée, J., & Simon‐Masseron, A. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300377 · Cited by 88
Structural Engineering of Hierarchical Zeolite-Based Catalysts
Wei, Y., Feng, J., Guan, B., & Yu, J. (2024) · Accounts of Materials Research · doi:10.1021/accountsmr.4c00076 · Cited by 88
Fabrication of metal-organic framework architectures with macroscopic size: A review
Fonseca, J., & Gong, T. (2022) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214520 · Cited by 82
Recent advances in ink-based additive manufacturing for porous structures
Guo, Z., & Zhou, C. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102405 · Cited by 75
Utilizing graphene oxide in cementitious composites: A systematic review
Murali, M., Alaloul, W. S., Mohammed, B. S., Musarat, M. A., Salaheen, M. A., Al-Sabaeei, A. M., & Abdulkadir, I. (2022) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2022.e01359 · Cited by 75
3D printing of metal–organic framework composite materials for clean energy and environmental applications
Kearns, E. R., Gillespie, R., & D’Alessandro, D. M. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta08777k · Cited by 70
Enhancement of wastewater treatment performance using 3D printed structures: A major focus on material composition, performance, challenges, and sustainable assessment
Saidulu, D., Srivastava, A., & Gupta, A. K. (2022) · Journal of Environmental Management · doi:10.1016/j.jenvman.2022.114461 · Cited by 70
3D-printed zeolite 13X gyroid monolith adsorbents for CO2 capture
Jivrakh, K. B., Varghese, A. M., Ehrling, S., Reddy, K. S. K., Polychronopoulou, K., Al‐Rub, R. K. A., Alamoodi, N., & Karanikolos, G. N. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154674 · Cited by 71
3D-printed titanium-based ionic sieve monolithic adsorbent for selective lithium recovery from salt lakes
Yu, J., Zhu, J., Luo, G., Chen, L., Li, X., Cui, P., Wu, P., Chao, Y., Zhu, W., & Liu, Z. (2023) · Desalination · doi:10.1016/j.desal.2023.116651 · Cited by 68
Self-citation
Three-Dimensional Printing of Cellulose/Covalent Organic Frameworks (CelloCOFs) for CO 2 Adsorption and Water Treatment
Abdelhamid, H. N., Sultan, S., & Mathew, A. P. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c13966 · Cited by 65
3D-Printed photocatalysts for revolutionizing catalytic conversion of solar to chemical energy
Lin, H., Ma, M., Qi, H., Wang, X., Xing, Z., Alowasheeir, A., Tang, H., Jun, S. C., Yamauchi, Y., & Liu, S. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101427 · Cited by 65
Engineering metal–organic frameworks for adsorption-based gas separations: from process to atomic scale
Taddei, M., & Petit, C. (2021) · Molecular Systems Design & Engineering · doi:10.1039/d1me00085c · Cited by 64
Cold Temperature Direct Air CO 2 Capture with Amine-Loaded Metal–Organic Framework Monoliths
Wang, Y., Rim, G., Song, M., Holmes, H. E., Jones, C. W., & Lively, R. P. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c13528 · Cited by 64
3D printing in photocatalysis: Methods and capabilities for the improved performance
Aguirre-Cortés, J. M., Moral-Rodríguez, A. I., Bailón‐García, E., Davó‐Quiñonero, A., Pérez‐Cadenas, A. F., & Carrasco-Marı́n, F. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.101831 · Cited by 63
MOF/POM hybrids as catalysts for organic transformations
Maru, K., Kalla, S., & Jangir, R. (2022) · Dalton Transactions · doi:10.1039/d2dt01895k · Cited by 62
Adsorbent technologies and applications for carbon capture, and direct air capture in environmental perspective and sustainable climate action
Ayeleru, O. O., Modekwe, H. U., Onisuru, O. R., Ohoro, C. R., Akinnawo, C. A., & Olubambi, P. A. (2023) · Sustainable Chemistry for Climate Action · doi:10.1016/j.scca.2023.100029 · Cited by 63
The analysis and evaluation of direct air capture adsorbents on the material characterization level
Wu, J., Zhu, X., Chen, Y., Wang, R. Z., & Ge, T. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.137958 · Cited by 58
Low-concentration CO 2 capture using metal–organic frameworks – current status and future perspectives
Åhlén, M., Cheung, O. Y. H., & Xu, C. (2023) · Dalton Transactions · doi:10.1039/d2dt04088c · Cited by 58
A review of adsorption materials and their application of 3D printing technology in the separation process
Yu, J., Zhu, J., Chen, L., Chao, Y., Zhu, W., & Liu, Z. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.146247 · Cited by 58
Water based adsorption thermal battery: Sorption mechanisms and applications
Zeng, Z., Zhao, B., & Wang, R. Z. (2022) · Energy storage materials · doi:10.1016/j.ensm.2022.11.024 · Cited by 56
Metal–organic frameworks for biomedical applications: bridging materials science and regenerative medicine
Nasri, N., Azad, M., Mehrabi, Z., Dini, G., & Marandi, A. (2025) · RSC Advances · doi:10.1039/d5ra05337d · Cited by 58
Electrical swing adsorption on 3D-printed activated carbon monoliths for CO2 capture from biogas
Verougstraete, B., Schoukens, M., Sutens, B., Haute, N. V., Vos, Y. D., Rombouts, M., & Denayer, J. F. M. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121660 · Cited by 55
Coaxial 3D Printing of Zeolite‐Based Core–Shell Monolithic Cu‐SSZ‐13@SiO2 Catalysts for Diesel Exhaust Treatment
Wei, Y., Wang, S., Chen, M., Han, J., Yang, G., Wang, Q., Di, J., Li, H., Wu, W., & Yu, J. (2023) · Advanced Materials · doi:10.1002/adma.202302912 · Cited by 54
Mind the Gap: The Role of Mass Transfer in Shaped Nanoporous Adsorbents for Carbon Dioxide Capture
Verstreken, M. F. K., Chanut, N., Magnin, Y., Landa, H. O. R., Denayer, J. F. M., Baron, G. V., & Ameloot, R. (2024) · Journal of the American Chemical Society · doi:10.1021/jacs.4c03086 · Cited by 53
Structural and functional tailoring of interfacial solar evaporators using 3D printing
Zhang, X., Wang, J., Wang, X., Xu, Y., & Li, Y. (2025) · Materials Today · doi:10.1016/j.mattod.2025.01.011 · Cited by 53
Additive manufacturing for adsorption‐related applications—A review
Pereira, A., Ferreira, A. F. P., Rodrigues, A. E., Ribeiro, A. M., & Regufe, M. J. (2021) · Journal of Advanced Manufacturing and Processing · doi:10.1002/amp2.10108 · Cited by 52
Review on Additive Manufacturing of Catalysts and Sorbents and the Potential for Process Intensification
Rosseau, L. R. S., Middelkoop, V., Willemsen, H. A. M., Roghair, I., & Annaland, M. V. S. (2022) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2022.834547 · Cited by 51
Recent advances in intermediate-temperature CO2 capture: Materials, technologies and applications
Zhao, C., Wang, L., Huang, L., Musyoka, N. M., Xue, T., Rabeah, J., & Wang, Q. (2023) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2023.11.024 · Cited by 50
Integrated direct air capture and oxidative dehydrogenation of propane with CO2 at isothermal conditions
Lawson, S., Baamran, K. S., Newport, K., Alghamadi, T., Jacobs, G., Rezaei, F., & Rownaghi, A. A. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2021.120907 · Cited by 49
Self-citation
Facile synthesis of structured adsorbent with enhanced hydrophobicity and low energy consumption for CO2 capture from the air
Wu, J., Chen, Y., Xu, Y., Chen, S., Lv, H., Gan, Z., Zhu, X., Wang, R. Z., Wang, C., & Ge, T. (2023) · Matter · doi:10.1016/j.matt.2023.10.019 · Cited by 53
Recent Advances in Carbon-Based Adsorbents for Adsorptive Separation of Light Hydrocarbons
Wang, Y., Zhang, X., Ba, Y., Li, T.-Y., Hao, G., & Lu, A. (2022) · Research · doi:10.34133/2022/9780864 · Cited by 47
Evaluation of the Potential of a 3d-Printed Hybrid Zeolite 13x/Activated Carbon Material for Co2/N2 Separation Using Electric Swing Adsorption
Pereira, A., Ferreira, A. F. P., Rodrigues, A. E., Ribeiro, A. M., & Regufe, M. J. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138197 · Cited by 47
Influence of Interfering Ions and Adsorption Temperature on Radioactive Iodine Removal Efficiency and Stability of Ni-MOF-74 and Zr-UiO-66
Alghamdi, T., Aina, P. O., Rownaghi, A. A., & Rezaei, F. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c05821 · Cited by 45
Self-citation
Effects of Process Parameters on CO2/H2 Separation Performance of 3D-Printed MOF-74 Monoliths
Lawson, S., & Rezaei, F. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c03443 · Cited by 44
Self-citation
3D-printed structured catalysts for CO2 methanation reaction: Advancing of gyroid-based geometries
González‐Castaño, M., Baena‐Moreno, F. M., de Miguel, J. C. N., Miah, K. U. M., Torralvo, F. A., Ossenbrink, R., Odriozola, J. A., Benzinger, W., Hensel, A., Wenka, A., et al. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115464 · Cited by 43
Adsorbent shaping as enabler for intensified pressure swing adsorption (PSA): A critical review
Chisăliță, D.-A., Boon, J., & Lücking, L. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.128466 · Cited by 41
Vat polymerization-based 3D printing of nanocomposites: A mini review
Li, Y., Wang, W., Wu, F., & Kankala, R. K. (2023) · Frontiers in Materials · doi:10.3389/fmats.2022.1118943 · Cited by 41
Structured nanoporous copper catalysts prepared by laser powder bed fusion and dealloying for on-board methanol steam reforming
Li, C., Yuan, S., Yao, X., Yu, X., Li, B., & Tu, S. (2023) · Fuel · doi:10.1016/j.fuel.2023.128367 · Cited by 40
Advances in vat photopolymerization 3D printing: Multifunctional materials, process innovations, and emerging applications
Khan, K., Hussain, M. I., Tareen, A. K., Ali, A., Hamza, M., & Chen, Z. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.101120 · Cited by 39
Formulation and processing of dual functional Adsorbent/Catalyst structured monoliths using an additively manufactured contactor for direct Capture/Conversion of CO2 with cogeneration of ethylene
Lawson, S., Baamran, K. S., Newport, K., Rezaei, F., & Rownaghi, A. A. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133224 · Cited by 41
Self-citation
Assessment of CO2/CH4 Separation Performance of 3D-Printed Carbon Monoliths in Pressure Swing Adsorption
Lawson, S., Al‐Naddaf, Q., Newport, K., Rownaghi, A. A., & Rezaei, F. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c01741 · Cited by 38
Self-citation
3D printed degradable hydrogel evaporator for high-efficiency, environmental-friendly solar alkaline-water evaporation
Hu, M., Wu, C., Xie, Q., Yu, J., Guo, Y., Shuai, Y., Wang, X., & Wang, Z. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.156132 · Cited by 37
3D printing of TiO2 nano particles containing macrostructures for As(III) removal in water
Wang, D., Zhi, T., Liu, L., Li, Y., Yan, W. Q., Tang, Y., He, B., Hu, L., Jing, C., & Jiang, G. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.152754 · Cited by 37
Process evaluation and kinetic analysis of 3D-printed monoliths comprised of CaO and Cr/H-ZSM-5 in combined CO2 Capture-C2H6 oxidative dehydrogenation to C2H4
Baamran, K. S., Lawson, S., Rownaghi, A. A., & Rezaei, F. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.134706 · Cited by 36
Self-citation
A critical review on 3D-printed adsorbents, membranes, and catalysts for carbon dioxide capture, separation, and conversion
Jivrakh, K. B., Reddy, K. S. K., Dumée, L. F., Polychronopoulou, K., Al‐Rub, R. K. A., Alamoodi, N., & Karanikolos, G. N. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.143522 · Cited by 35
Zeolite-coated 3D-printed gyroid scaffolds for carbon dioxide adsorption
Jivrakh, K. B., Reddy, K. S. K., Taher, S. E., Polychronopoulou, K., Al‐Rub, R. K. A., Alamoodi, N., & Karanikolos, G. N. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.127523 · Cited by 34
3D printing enhanced catalysis for energy conversion and environment treatment
Chen, J., Wu, P., Bu, F., Gao, Y., Liu, X., & Guan, C. (2023) · DeCarbon · doi:10.1016/j.decarb.2023.100019 · Cited by 34
Screening of Adsorbent/Catalyst Composite Monoliths for Carbon Capture-Utilization and Ethylene Production
Lawson, S., Baamran, K. S., Newport, K., Rezaei, F., & Rownaghi, A. A. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c17668 · Cited by 33
Self-citation
Adsorption film with sub-milli-interface morphologies via direct ink writing for indoor formaldehyde removal
Chen, Q., Tian, E., Luo, Z., & Mo, J. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.128190 · Cited by 33
Adsorption-Enhanced Bifunctional Catalysts for In Situ CO2 Capture and Utilization in Propylene Production: A Proof-Of-Concept Study
Lawson, S., Baamran, K. S., Newport, K., Garcia, E. S., Jacobs, G., Rezaei, F., & Rownaghi, A. A. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c04455 · Cited by 33
Self-citation
Review and Perspectives of Monolithic Metal–Organic Frameworks: Toward Industrial Applications
Yu, X., Li, B., Wu, L., Shi, D., & Han, S. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00858 · Cited by 32
Recent Progress and Perspectives of Direct Ink Writing Applications for Mass Transfer Enhancement in Gas‐Phase Adsorption and Catalysis
Chen, Q., Tian, E., Wang, Y., Mo, J., Xu, G., & Zhu, M. (2023) · Small Methods · doi:10.1002/smtd.202201302 · Cited by 32
3D printing synthesis of catalysts
Zhao, X., Karakaya, C., Qian, M., Zou, R., Zhang, W., Lü, Z., Maiti, D., Samanta, A., Wan, W., Liu, X., et al. (2024) · Materials Today Sustainability · doi:10.1016/j.mtsust.2024.100746 · Cited by 31
3D printing of poly(ethyleneimine)-functionalized Mg-Al mixed metal oxide monoliths for direct air capture of CO2
Shao, Q., Gan, Z., Ge, B., Liu, X., Chen, C., O'Hare, D. M., & Zhu, X. (2024) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2024.05.015 · Cited by 31
3D-Printed Fe/γ-Al2O3 Monoliths from MOF-Based Boehmite Inks for the Catalytic Hydroxylation of Phenol
Salazar-Aguilar, A. D., Quintanilla, A., López, P., Martínez, C., Vega-Díaz, S. M., Casas, J. A., Miranzo, P., Osendi, M. I., & Belmonte, M. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c19755 · Cited by 31
Phosphor-Enhanced, Visible-Light-Storing g-C3N4/Ag3PO4/SrAl2O4:Eu2+,Dy3+ Photocatalyst Immobilized on Fractal 3D-Printed Supports
Lei, L., Wang, D., Kang, Y., de Mimérand, Y. D. R., Jin, X., & Guo, J. Y. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c23650 · Cited by 31
Direct Ink 3D Printing of Porous Carbon Monoliths for Gas Separations
Comroe, M. L., Kołasiński, K. W., & Saha, D. (2022) · Molecules · doi:10.3390/molecules27175653 · Cited by 31
Tailoring 3D Printed Micro‐Structured Carbons for Adsorption
Scott, S., Chew, Y. M. J., Barnard, J. E., Burrows, A. D., Smith, M. W., Tennison, S., & Perera, S. P. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213715 · Cited by 30
3D‐Printed COF/Zeolite Composites for Augmented Photocatalytic Hydrogen Peroxide Production
Feng, J., Wei, Y., Li, X., Wang, Q., Wang, B., Guo, Y., Feng, B., Jin, E., & Yu, J. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202508226 · Cited by 30
Self-citation
3D printing of hierarchically porous monolithic TS‐1 catalyst for one-pot synthesis of ethylene glycol
Huo, C., Tian, X., Yang, N., Qiu, Z., Zhong, Q., Huang, X., & Li, D. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138259 · Cited by 30
Magnetic-Field Assisted Gas Desorption from Fe2O3/Zeolite 13X Sorbent Monoliths for Biogas Upgrading
Newport, K., Baamran, K. S., Rownaghi, A. A., & Rezaei, F. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c02969 · Cited by 30
Self-citation
One-Pot Three-Dimensional Printing of a Hierarchical NiMo/Al2O3 Monolithic Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization
Liu, J., Zhu, J., Zhu, J. T., Xu, J., Liu, H., Hua, M., Cheng, H., Li, H., Liu, J., Zhu, W., et al. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c05620 · Cited by 30
Defect-Induced Secondary Crystals Drive Two-Dimensional to Three-Dimensional Morphological Evolution in the Co-Self-Assembly of Polyferrocenylsilane Block Copolymer and Homopolymer
Jiang, J., Nikbin, E., Liu, Y., Lei, S., Ye, G., Howe, J. Y., Manners, I., & Winnik, M. A. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.3c09791 · Cited by 30
A 3D-printed CuNi alloy catalyst with a triply periodic minimal surface for the reverse water-gas shift reaction
Li, W., Ding, J., Chen, X., Wang, Y., Song, X., & Zhang, S. M. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta05845j · Cited by 28
Unveiling the Power of Proximity of Prevalent Fe-Based Tandem Catalysts in CO 2 Hydrogenation via Modified Fischer–Tropsch: Crucial Relations toward Industrialization
Najari, S., Saeidi, S., Sápi, A., Kónya, Z., & Somorjai, G. A. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00697 · Cited by 28
In situ crystal engineering on 3D-printed woodpile scaffolds: a monolith catalyst with highly accessible active sites for enhanced catalytic cracking
Wang, R., Gong, Y., Wang, P., He, W., Ye, S., Xin, M., Jiang, Q., Sha, Y., Cao, T., Song, H., et al. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta01645e · Cited by 28
Surface Chemical Engineering of a Metal 3D-Printed Flow Reactor Using a Metal–Organic Framework for Liquid-Phase Catalytic H 2 Production from Hydrogen Storage Materials
Mori, K., Fujita, T., Hata, H., Kim, H.-J., Nakano, T., & Yamashita, H. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c10945 · Cited by 27
From breakup to coiling and buckling regimes in buoyant viscoplastic injections
Akbari, S., & Taghavi, S. M. (2022) · Journal of Fluid Mechanics · doi:10.1017/jfm.2022.254 · Cited by 27
3D-printed heterogeneous Cu2O monoliths: Reusable supports for antibiotic treatment of wastewater
Xie, Y., Yu, Y., Xie, H., Huang, F., & Hughes, T. C. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2022.129170 · Cited by 27
A scalable solar-based adsorption thermal battery for day and night heating in a low-carbon scenario
Zeng, Z., Yang, X., Zhao, B., Chen, Z., Chua, K. J., & Wang, R. Z. (2023) · Energy & Environmental Science · doi:10.1039/d3ee03519k · Cited by 27
Kinetic and mechanistic way for photocatalytic degradation of pollutants from textile wastewater by graphene oxide supported nanocomposite
Das, A., & Adak, M. K. (2024) · Next Materials · doi:10.1016/j.nxmate.2024.100153 · Cited by 27
Scalable 3D ‐printed lattices for pressure control in fluid applications
Woodward, I. R., Attia, L., Patel, P. P., & Fromen, C. A. (2021) · AIChE Journal · doi:10.1002/aic.17452 · Cited by 26
Polymer–Nickel Composite Filaments for 3D Printing of Open Porous Materials
Mackiewicz, E., Wejrzanowski, T., Adamczyk‐Cieślak, B., & Oliver, G. J. (2022) · Materials · doi:10.3390/ma15041360 · Cited by 26
Advances in Designing 3D‐Printed Systems for CO2 Reduction
Padinjareveetil, A. K. K., & Pumera, M. (2023) · Advanced Materials Interfaces · doi:10.1002/admi.202201734 · Cited by 26
3D‐printed green and low‐cost porous g‐C 3 N 4 /geopolymer components for the removal of methylene blue from wastewater
Liu, X., Ma, S., Yang, H., He, P., Duan, X., Jia, D., Colombo, P., & Zhou, Y. (2024) · Journal of the American Ceramic Society · doi:10.1111/jace.19654 · Cited by 26
DLP 3D printing of alumina catalyst architectures: Design, kinetics and modeling of structure effects on catalyst performance
Mastroianni, L., Ferrer, A. D. J. M., Domenico, A. M. D., Eränen, K., Serio, M. D., Murzin, D. Y., Russo, V., & Salmi, T. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.157691 · Cited by 25
Chitosan-polylactic acid composites: from seafood waste to advanced functional materials for 3D printing
Blanzeanu, E., Marin, M. M., Verziu, M. N., Dumitru, A., Vasile, B. Ş., Stavarache, C. E., Cozorici, D., Luque, R., Zaharia, C., & Radu, I. (2024) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-024-01131-x · Cited by 25
Rotary-angle 3D printing multilayer membrane dead-end filtration for rapid and highly efficient water treatment
Ju, Y., Zhang, J., Cai, Q., Zhang, Z., Zhao, Y., Cui, J., Hou, R., Wei, Y., Liang, Z., & Chen, F. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.139969 · Cited by 25
CVD nanocrystalline multilayer graphene coated 3D-printed alumina lattices
Ramírez, C., Shamshirgar, A. S., Pérez-Coll, D., Osendi, M. I., Miranzo, P., Tewari, G. C., Karppinen, M. J., Hussainova, I., & Belmonte, M. (2022) · Carbon · doi:10.1016/j.carbon.2022.10.085 · Cited by 25
3D printed SrNbO 2 N photocatalyst for degradation of organic pollutants in water
Iborra-Torres, A., Huš, M., Nguyen, K. G., Vamvakeros, A., Sajjad, M. T., Dunn, S., Mertens, M., Jacques, S. D. M., Beale, A. M., Likozar, B., et al. (2023) · Materials Advances · doi:10.1039/d2ma01076c · Cited by 25
Functionalization of recycled polymer and 3D printing into porous structures for selective recovery of copper from copper tailings
Ibebunjo, K., Ouardi, Y. E., Bediako, J. K., Iurchenkova, A. A., & Repo, E. (2023) · Chemical Engineering Science · doi:10.1016/j.ces.2023.119664 · Cited by 25
Exploring the 3D printing of molybdenum carbide-based catalysts for the reverse water gas shift reaction: A multi scale study
Pajares, A., Andrade‐Arvizu, J., Jain, D., Monai, M., Lefevere, J., de la Piscina, P. R., Homs, N., & Michielsen, B. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.149048 · Cited by 25
Recent Advances in the Development of Highly Conductive Structured Supports for the Intensification of Non-adiabatic Gas-Solid Catalytic Processes: The Methane Steam Reforming Case Study
Balzarotti, R., Ambrosetti, M., Beretta, A., Groppi, G., & Tronconi, E. (2022) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2021.811439 · Cited by 24
Porous 3D Printable Hydrogels
Baur, E., Hirsch, M., & Amstad, E. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201763 · Cited by 24
3D‐Printed Porous Organic Cages for Gas Filtration: Fabrication and Flow Simulations
Ling, B., Agrawal, R., He, D., Poole, R. J., Cooper, A. I., Liu, M., & García‐Tuñón, E. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202405320 · Cited by 24

Authors: Lawson, S., Li, X., Thakkar, H., Rownaghi, A. A., & Rezaei, F.
Affiliations: Missouri University of Science and Technology (US)
Corresponding author: Rownaghi, Ali A.
Rezaei, Fateme
ORCID: Thakkar, Harshul
Rownaghi, Ali A.
Rezaei, Fateme
Venue: Chemical Reviews
Publisher: American Chemical Society (ACS)
Published: 2021-05-05
Volume: 121
Issue: 10
Pages: 6246-6291
ISSN: 0009-2665 (ISSN-L)
1520-6890
DOI: 10.1021/acs.chemrev.1c00060
OpenAlex: W3159383780
Cited by: 341
References: 171
Citations by year: 2026: 64 · 2025: 73 · 2024: 71 · 2023: 63 · 2022: 54 · 2021: 16
FWCI: 3.45
Type: journal article
Language: en
Open access: closed
Licence: doi.org/10.15223/policy-029 (stm-asf)
doi.org/10.15223/policy-037 (stm-asf)
doi.org/10.15223/policy-045 (stm-asf)
Locations: Chemical Reviews (publishedVersion)
PubMed (publishedVersion)
Topics: Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
Physical Sciences › Engineering › Computational Mechanics › Heat and Mass Transfer in Porous Media
Physical Sciences › Materials Science › Materials Chemistry › Mesoporous Materials and Catalysis
Keywords: 3D printing, additive manufacturing, porous adsorbents, catalysts, structured materials, shape engineering, pressure drop, attrition, adsorption, catalysis, separation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications.

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks