Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications.

3D printing of polymer matrix composites: A review and prospective

Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,474

A review on solid adsorbents for carbon dioxide capture

Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707

A short review of recent advances in CO 2 hydrogenation to hydrocarbons over heterogeneous catalysts

Li, W., Wang, H., Jiang, X., Zhu, J., Liu, Z., Guo, X., & Song, C. (2018) · RSC Advances · doi:10.1039/c7ra13546g · Cited by 690

Solid heterogeneous catalysts for transesterification of triglycerides with methanol: A review

Helwani, Z., Othman, M. R., Aziz, N., Kim, J., & Fernando, W. J. N. (2009) · Applied Catalysis A General · doi:10.1016/j.apcata.2009.05.021 · Cited by 614

Monolithic reactors for environmental applications

Avila, P., Montes, M., & Miró, E. E. (2005) · Chemical Engineering Journal · doi:10.1016/j.cej.2005.02.025 · Cited by 539

Metal–organic frameworks meet scalable and sustainable synthesis

Julien, P., Mottillo, C., & Friščić, T. (2017) · Green Chemistry · doi:10.1039/c7gc01078h · Cited by 526

Comparison of Activated Carbon and Zeolite 13X for CO2 Recovery from Flue Gas by Pressure Swing Adsorption

Chue, K.-T., Kim, J. N., Yoo, Y.-J., Cho, S. H., & Yang, R. T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a020 · Cited by 499

A review on inkjet printing of nanoparticle inks for flexible electronics

Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01630a · Cited by 497

3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors

Parra‐Cabrera, C., Achille, C., Kuhn, S., & Ameloot, R. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00631d · Cited by 494

Progress in 3D Printing of Carbon Materials for Energy‐Related Applications

Fu, K. K., Yao, Y., Dai, J., & Hu, L. (2016) · Advanced Materials · doi:10.1002/adma.201603486 · Cited by 486

Additive Fertigung als die Zukunft der grünen chemischen Ingenieurwissenschaften

Mehla, S., Gudi, R. D., Mandaliya, D. D., Hisatomi, T., Domen, K., & Bhargava, S. K. (2024) · Springer eBooks · doi:10.1007/978-981-97-0978-6_8

Aufkommende technologische Anwendungen der additiven Fertigung

Mehla, S., Selvakannan, P., Mazur, M., & Bhargava, S. K. (2024) · Springer eBooks · doi:10.1007/978-981-97-0978-6_7

Additive Manufacturing with Polymer Composites for Sustainable Applications

Cummings, B. (2024) · Cronfa (Swansea University) · doi:10.23889/suthesis.66887

Enhanced Transverse Dispersion in 3D-Printed Logpile Structures: A Comparative Analysis of Stacking Configurations

Rosseau, L. R. S., van Aarle, M. A. A., van Laer, E., Roghair, I., & Annaland, M. V. S. (2024) · Processes · doi:10.3390/pr12102151

Impregnation of Composite 3D Prints for Enhanced Structural Stability

Mackiewicz, E., Nowacki, R., Komorowska, G., & Wejrzanowski, T. (2025) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-025-00753-w

The binding mechanism of Covalent Organic Frameworks (COFs) to Calcitonin Gene-Related Peptide Receptors (CGRPRs)

Rezvantalab, S., Imanpour, A., Dabiri, M., & Beheshtizadeh, N. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.147038

Synergistic effects of 3D lattice structures and zeolite Y coating for superior CO2 adsorption performance

Lee, S.-J., Lee, K.-K., Kim, C.-L., & Ahn, D. (2025) · Surfaces and Interfaces · doi:10.1016/j.surfin.2025.107915

Binder-Free Direct Ink Writing of a Concentrated Dispersion of One-Dimensional Lepidocrocite Titanate Nanofilaments

Mekunye, F., Walter, A. D., Schwenk, G. R., Barsoum, M. W., & Davis, V. A. (2025) · ACS Nanoscience Au · doi:10.1021/acsnanoscienceau.5c00110

3D-Printed Ceramic Solutions for Passive Cooling and CO2 Adsorption: Investigating Material and Fabrication Parameters in LDM for New Eco-Sustainable Design Paradigms

Tsiokou, V., Antypa, D., Karatza, A., & Koumoulos, E. P. (2025) · Sustainability · doi:10.3390/su18010013

Design and modeling by 3D printing of photoreactor/ catalyst hybrid systems to optimize reactions of environmental interest

Aguirre-Cortés, J. M. (2024) · Institutional Repository of the University of Granada (University of Granada)

Biomass-Derived Activated Carbon

Botello-González, J., Regalado, E. S., Loredo‐Cancino, M., Dávila-Guzmán, N. E., & Salazar-Rábago, J. J. (2026) · IGI Global eBooks · doi:10.4018/979-8-3373-3556-8.ch011

3D-printed pneumatically-stirred parallel reactors for chemical synthesis under high magnetic fields

Sun, C., Wang, W., Guo, J., Zhang, C., Hou, S., Li, M., Hu, L., Qiang, Y., & Sheng, Z. (2026) · Reaction Chemistry & Engineering · doi:10.1039/d6re00018e

Techno-economic analysis of synthetic natural gas production system using CO₂ captured from air

Harada, H. (2024) · Institutional Repositories DataBase (IRDB)

Étude approfondie de la distillation réactive enzymatique hétérogène : de l'expérimentation à la modélisation et simulation des procédés

Chaussard, N. (2024) · theses.fr (ABES) · doi:10.70675/8ea73425z77eaz4282zadbez755098a1fc52

Additive Manufacturing in Organic Chemistry: From Synthesis to Sustainable Process Design

Domiński, A., Zawidlak-Węgrzyńska, B., & Rydz, J. (2026) · International Journal of Molecular Sciences · doi:10.3390/ijms27083512

3D printed ion-chelating architectures for electrochemical wastewater valorization into flexible electronics and metal recycling

Song, K., Li, Y., Xu, C., Umezu, S., & Hirotaka, S. A. T. O. (2026) · Additive manufacturing · doi:10.1016/j.addma.2026.105210

Production of Adsorption-Active Carbon Monoliths by 3D Printing and Study of Their Primary Characteristics

Самонин, В. В., Хохлачев, С. П., Sychov, M. M., Spiridonova, E. А., Львович, П. М., & Долгин, А. С. (2026) · Russian Journal of General Chemistry · doi:10.1134/s1070363226020052

Thermal management of gyroid-packed temperature and pressure swing adsorption for flue gas CO2 capture

Khatoon, S., Canevesi, R. L. S., Asif, M. A., Siddiqui, O., Younes, M., Sadat, W. I. A., & Grande, C. A. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.110639

Engineering Flow Anisotropy in Additively Manufactured Lattices via Patterned Unit Cell Symmetry

Woodward, I. R., Hoffman, D. J., & Fromen, C. A. (2026) · Journal of Composites Science · doi:10.3390/jcs10050246

Data-driven inverse parameter design for stable dimensional control in extrusion-based additive manufacturing

Haseltalab, V., Dutta, A., & Yang, S. L. (2026) · Computers in Industry · doi:10.1016/j.compind.2026.104520

3D-printed adsorbents for wastewater treatment

Efthymiopoulos, P., & Kyzas, G. Z. (2026) · Advances in chemical pollution, environmental management and protection · doi:10.1016/bs.apmp.2025.12.017

Efficient Adsorption‐Based Direct Air Capture Via Triply Periodic Minimal Surface Architectures

Shao, Q., Gan, Z., Long, C., Zhang, M., Miao, Y., Li, Y., & Zhu, X. (2026) · Advanced Science · doi:10.1002/advs.76487

Selective and regenerative ammonium recovery using 3D-printed PLA scaffolds functionalized with cobalt hexacyanoferrate

Kim, T., Nia, N. D., Park, Y., Kim, B., & Hwang, Y. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.179280

Growth of metal–organic frameworks on complex copper architectures fabricated by laser powder bed process

Calignano, F., Bove, A., Manfredi, D., & Tulliani, J. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.116618

From powder to architected monoliths: porous photopolymer-derived carbons for adsorption of nitrophenol isomers in batch and continuous-flow systems

Corrochano, N., de Tuesta, J. L. D., Silva, A. S., & Martı́nez, F. (2026) · Separation and Purification Technology · doi:10.2139/ssrn.7228205

Microbial-Plant-Biochar System for the Removal of Pollutants from Effluents and Contaminated Soil

Zainab, F., Iqbal, A., Sakhawat, A., Sajid, M. U., Bibi, A., & Siddiqa, A. (2025) · International Journal of Innovations in Science and Technology · doi:10.33411/ijist/1661

3D-printed monolithic zeolite structures for terrestrial decarbonization and space life support systems

Agata, N. H., Cesarano, J., Richardson, T.-M. J., & Bigham, S. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.179476

Preparation of Porous Alumina Monoliths Using Indirect 3D Printing

Vdovichenko, V. A., Lysikov, A. I., Vorobyeva, E. Е., Polukhin, A. V., Barsukov, A. N., Selezneva, D. A., Shnayder, A. V., & Parkhomchuk, E. V. (2026) · Advanced Engineering Materials · doi:10.1002/adem.71186

Water-stable 3D-printed sludge-derived activated carbon monoliths for continuous fixed-bed cytostatic adsorptionPreprint

Portillo, E., Carbajo, J., Álvarez-Torrellas, S., Águeda, V. I., & Garcı́a, J. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7346385

Structured solid amine adsorbents for CO2 capture: Integrating amine incorporation with cementitious hydration and chemical foaming

Zhao, C., Li, Y., Ma, Y., Nie, M., Song, B., Li, J., & Wang, W. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.181358

Microstructure-programmed heat transport and self-optimizing catalysis in additively manufactured high-entropy alloy reactors for the reverse water–gas shift reaction

Hirasawa, R., Kim, H., Ozasa, R., Nakano, T., & Mori, K. (2026) · Journal of Materials Chemistry A · doi:10.1039/d6ta06536h

3D Printing of Hydrophobic Porous Materials and Their Application for the Adsorption of Organic Pollutants

Batool, N., Gaillard, T., Trens, P., Voiry, D., & Aubert, T. (2026) · Chemistry of Materials · doi:10.1021/acs.chemmater.6c01026

Oil Sorption and Oil–Water Separation Using 3D Printed Sorbents Manufactured with Fused Filament Fabrication

Kántor, J., & GERGELY, A. L. (2026) · Polymers · doi:10.3390/polym18172138

Continuous-Flow Iodine Removal from Aqueous Wastes Using Structured MOF Composites

Jia, X., Medina, P. A. B., Alghamdi, T., Rezaeicherati, F., Rownaghi, A. A., Ghahremaninezhad, A., & Rezaei, F. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c08367

DLP Printing of β-Cyclodextrin-Functionalized Hierarchically Porous Polymer Monoliths for Efficient Micropollutant Removal

Liu, Y., Cao, Y., Chen, X., Li, Q., & Dong, Z. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.6c02806

Additive Manufacturing for Thermal Energy Storage Systems: A Review of Architected Structures, Heat Transfer Enhancement, and Design Strategies

Weber, K., Tiari, S., & Eslami, B. (2026) · Energies · doi:10.3390/en19184292

Self‐Pillared Pentasil Zeolite Microspheres as Self‐Supported Catalysts With Enhanced Molecular Diffusion for Waste Plastic Upcycling

Yu, S., Zhao, Z., Song, Z., Liu, Q., 邵明远, Wang, Y., Matsumoto, T., Yanaba, Y., Zhu, J., Lü, Y., et al. (2026) · Angewandte Chemie · doi:10.1002/ange.1633031

Self‐Pillared Pentasil Zeolite Microspheres as Self‐Supported Catalysts With Enhanced Molecular Diffusion for Waste Plastic Upcycling

Yu, S., Zhao, Z., Song, Z., Liu, Q., 邵明远, Wang, Y., Matsumoto, T., Yanaba, Y., Zhu, J., Lü, Y., et al. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.1633031

A Self-Sufficient Photocatalytic CO2 Reduction over Ionic Liquid-Modified Three-Dimensional-Printed Pt Single-Atom TiO2 Nanosheets

Ansari, H. M., Ullah, K., Karamat, S., Han, Y.-P., Kuzhandaivel, D., Qarnain, Z., Mumtaz, S., Baloch, A. U. R., & Said, A. (2026) · Chemistry of Materials · doi:10.1021/acs.chemmater.6c01235

Atom-to-reactor engineering of 3D-printed Ni-N/SiOC monolithic catalysts with interfacial dual-site synergy for robust low-temperature CO2 methanation

Mi, H., Guo, X., Zhang, Y., You, Z., Kong, Y., Yao, J., Zhang, D., Gu, M., Qian, F., & Luo, F. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.182745

Tailoring permeability and mechanical strength of hydrophobic PDMS-modified geopolymer scaffolds via advanced MEX filling strategies

Nisio, F. G. D., D'Agostini, M. L., Elsayed, H., Colombo, P., & Volpato, N. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.10.086

Water-based direct ink writing of high-loading monolithic contactors from commercial amine resins for direct air capture of CO2

Ghasemian, M., Biniaz, P., Askari, S., Kamiar, A., Guo, Y., Alivand, M. S., Tanksale, A., & Webley, P. A. (2026) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2026.100705

Designing sustainable catalysts that matter: A process-level framework

Sievers, C., Rightor, E., Sarma, K., Siddall, G., Thakare, M. R., & Tway, C. L. (2026) · Applied Catalysis A General · doi:10.1016/j.apcata.2026.121267

A stage-resolved multi-resistance framework for CO2 adsorption kinetics from shaped particles to packed beds

Liu, W., Chen, S., Li, J. F., Yu, B., & Jiang, L. (2026) · Separation and Purification Technology · doi:10.1016/j.seppur.2026.140557

Modifications of 3D-Printed Adsorbent Materials for Pollutant Removal from Wastewaters

Maroulas, K. N., & Kyzas, G. Z. (2026) · Molecules · doi:10.3390/molecules31203738

Recent advances in two-dimensional metal-organic frameworks for solar energy conversion

Shahid, H., Waqas, M., Chou, M. M. C., & Wang, Y. (2026) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2026.218705

Methane/hydrogen separation using a hierarchically structured 3D-printed porous carbon monolith

Bueno, L., Silva, A. S., Gläsel, J., Gomes, H. T., Rodrigues, A. E., Etzold, B. J. M., da Silva, J. A. C., & Henrique, A. (2026) · Separation and Purification Technology · doi:10.1016/j.seppur.2026.140806

3D-printed catalytic material for click chemistry reaction

Savchenko, M., Campos, J. Q., Martin, A. R., & Godeau, G. (2026) · Comptes Rendus Chimie · doi:10.5802/crchim.489

3D printing across the crop growth Cycle: Toward sustainable agricultural systems

Deng, M., Shangguan, W., Wang, T., Zhang, Y., Huang, Q., & Cao, L. (2026) · Progress in Materials Science · doi:10.1016/j.pmatsci.2026.101884

An Overview on 3D Printing of Structured Porous Materials and Their Applications

Gao, Y., Lalevée, J., & Simon‐Masseron, A. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300377 · Cited by 88

Three-Dimensionally Printed Catalytic Structures

Marchenkova, M. A., Gadzhiev, J. K., Guda, A. A., Soldatov, A. V., & Chapek, S. V. (2025) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp9110372 · Cited by 5

A review of adsorption materials and their application of 3D printing technology in the separation process

Yu, J., Zhu, J., Chen, L., Chao, Y., Zhu, W., & Liu, Z. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.146247 · Cited by 58

Additive manufacturing of high-performance adsorbents for environmental use

Zheng, A. L. T., Teo, E. Y. L., Marzuki, O. F., Koo, L. F., Wong, T. J., Chung, E. L. T., & Andou, Y. (2025) · Engineering Research Express · doi:10.1088/2631-8695/adfacc · Cited by 11

Catalytic Materials by 3D Printing: A Mini Review

Chen, L., Zhou, S., Li, M., Mo, F., Yu, S., & Wei, J. (2022) · Catalysts · doi:10.3390/catal12101081 · Cited by 38