The DOI matches its Crossref record; 329 of the 329 references it cites were found in a registry or an index.
Review of Multifunctional Separators: Stabilizing the Cathode and the Anode for Alkali (Li, Na, and K) Metal–Sulfur and Selenium Batteries
Open accessAbstract
Alkali metal batteries based on lithium, sodium, and potassium anodes and sulfur-based cathodes are regarded as key for next-generation energy storage due to their high theoretical energy and potential cost effectiveness. However, metal–sulfur batteries remain challenged by several factors, including polysulfides’ (PSs) dissolution, sluggish sulfur redox kinetics at the cathode, and metallic dendrite growth at the anode. Functional separators and interlayers are an innovative approach to remedying these drawbacks. Here we critically review the state-of-the-art in separators/interlayers for cathode and anode protection, covering the Li–S and the emerging Na–S and K–S systems. The approaches for improving electrochemical performance may be categorized as one or a combination of the following: Immobilization of polysulfides (cathode); catalyzing sulfur redox kinetics (cathode); introduction of protective layers to serve as an artificial solid electrolyte interphase (SEI) (anode); and combined improvement in electrolyte wetting and homogenization of ion flux (anode and cathode). It is demonstrated that while the advances in Li–S are relatively mature, less progress has been made with Na–S and K–S due to the more challenging redox chemistry at the cathode and increased electrochemical instability at the anode. Throughout these sections there is a complementary discussion of functional separators for emerging alkali metal systems based on metal–selenium and the metal–selenium sulfide. The focus then shifts to interlayers and artificial SEI/cathode electrolyte interphase (CEI) layers employed to stabilize solid-state electrolytes (SSEs) in metal–sulfur solid-state batteries (SSBs). The discussion of SSEs focuses on inorganic electrolytes based on Li- and Na-based oxides and sulfides but also touches on some hybrid systems with an inorganic matrix and a minority polymer phase. The review then moves to practical considerations for functional separators, including scaleup issues and Li–S technoeconomics. The review concludes with an outlook section, where we discuss emerging mechanics, spectroscopy, and advanced electron microscopy ( e.g . cryo-transmission electron microscopy (cryo-TEM) and cryo-focused ion beam (cryo-FIB))-based approaches for analysis of functional separator structure–battery electrochemical performance interrelations. Throughout the review we identify the outstanding open scientific and technological questions while providing recommendations for future research topics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–329 of 329
Liu, W., Mi, Y., Weng, Z., Zhong, Y., Wu, Z., & Wang, H. (2017) · Chemical Science · doi:10.1039/c7sc00668c · Cited by 192
Single-Atom Coated Separator for Robust Lithium–Sulfur Batteries
Zhang, K., Chen, Z., Ning, R., Xi, S., Tang, W., Du, Y., Liu, C., Ren, Z., Chi, X., Bai, M., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b05628 · Cited by 192
Electrochemistry of Selenium with Sodium and Lithium: Kinetics and Reaction Mechanism
Li, Q., Liu, H., Yao, Z., Cheng, J., Li, T., Li, Y., Wolverton, C., Wu, J., & Dravid, V. P. (2016) · ACS Nano · doi:10.1021/acsnano.6b04519 · Cited by 191
Built-In Catalysis in Confined Nanoreactors for High-Loading Li–S Batteries
Wu, Q., Yao, Z., Zhou, X., Xu, J., Cao, F., & Li, C. (2020) · ACS Nano · doi:10.1021/acsnano.9b09231 · Cited by 189
Nanda, S., Bhargav, A., & Manthiram, A. (2020) · Joule · doi:10.1016/j.joule.2020.03.020 · Cited by 188
Li–Se battery: absence of lithium polyselenides in carbonate based electrolyte
Cui, Y., Abouimrane, A., Sun, C.-J., Ren, Y., & Amine, K. (2014) · Chem. Commun. · doi:10.1039/c4cc00934g · Cited by 187
Shi, H., Zhao, X., Wu, Z.-S., Dong, Y., Lu, P., Chen, J., Ren, W., Cheng, H.-M., & Bao, X. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.04.006 · Cited by 186
Dendrite‐Free Potassium Metal Anodes in a Carbonate Electrolyte
Liu, P., Wang, Y., Gu, Q., Nanda, J., Watt, J., & Mitlin, D. (2020) · Advanced Materials · doi:10.1002/adma.201906735 · Cited by 184
Self-citationGuo, Q., Li, S., Liu, X., Lu, H., Chang, X., Zhang, H., Zhu, X., Xia, Q., Yan, C., & Xia, H. (2020) · Advanced Science · doi:10.1002/advs.201903246 · Cited by 181
Memarzadeh Lotfabad, E., Kalisvaart, P., Cui, K., Kohandehghan, A., Kupsta, M., Olsen, B., & Mitlin, D. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52485j · Cited by 180
Self-citationHighly Stable Lithium–Sulfur Batteries Based on Laponite Nanosheet‐Coated Celgard Separators
Yang, Y., & Zhang, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801778 · Cited by 179
Love, C. T. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.10.083 · Cited by 175
Yu, X., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500350 · Cited by 172
Reactivity-Guided Interface Design in Na Metal Solid-State Batteries
Tian, Y., Sun, Y., Hannah, D. C., Xiao, Y., Liu, H., Chapman, K. W., Bo, S.-H., & Ceder, G. (2019) · Joule · doi:10.1016/j.joule.2018.12.019 · Cited by 172
Emerging Potassium Metal Anodes: Perspectives on Control of the Electrochemical Interfaces
Liu, P., & Mitlin, D. (2020) · Accounts of Chemical Research · doi:10.1021/acs.accounts.0c00099 · Cited by 171
Self-citationLee, Y., Lee, J., Lee, J., Kim, K., Cha, A., Kang, S., Wi, T., Kang, S. J., Lee, H.-W., & Choi, N.-S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02446 · Cited by 170
Xu, R.-C., Xia, X.-H., Li, S.-H., Zhang, S.-Z., Wang, X.-L., & Tu, J.-P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01147d · Cited by 167
High-Performance All-Inorganic Solid-State Sodium–Sulfur Battery
Yue, J., Han, F., Fan, X., Zhu, X., Ma, Z., Yang, J. H., & Wang, C. (2017) · ACS Nano · doi:10.1021/acsnano.7b01445 · Cited by 167
Liu, Y., Xu, B., Zhang, W., Li, L., Lin, Y., & Nan, C. (2020) · Small · doi:10.1002/smll.201902813 · Cited by 167
Film forming reaction at the lithium/electrolyte interface
Peled, E. (1983) · Journal of Power Sources · doi:10.1016/0378-7753(83)87026-8 · Cited by 166
Nanda, J., Yang, G., Hou, T., Voylov, D. N., Li, X., Ruther, R. E., Naguib, M., Persson, K., Veith, G. M., & Sokolov, A. P. (2019) · Joule · doi:10.1016/j.joule.2019.05.026 · Cited by 164
Wu, F., Zhao, S., Chen, L., Lu, Y., Su, Y., Jia, Y., Bao, L., Wang, J., Chen, S., & Chen, R. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.06.009 · Cited by 163
Review of Emerging Potassium–Sulfur Batteries
Ding, J., Zhang, H., Fan, W., Zhong, C., Hu, W., & Mitlin, D. (2020) · Advanced Materials · doi:10.1002/adma.201908007 · Cited by 163
Self-citationCryogenic Focused Ion Beam Characterization of Lithium Metal Anodes
Lee, J. Z., Wynn, T. A., Schroeder, M. A., Alvarado, J., Wang, X., Xu, K., & Meng, Y. S. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02381 · Cited by 162
Balach, J., Singh, H. K., Gomoll, S., Jaumann, T., Klose, M., Oswald, S., Richter, M., Eckert, J., & Giebeler, L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03642 · Cited by 161
Lacivita, V., Wang, Y., Bo, S.-H., & Ceder, G. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10498k · Cited by 160
Na3Zr2Si2PO12: A Stable Na+‑Ion Solid Electrolyte for Solid-State Batteries
Zhang, Z., Wenzel, S., Zhu, Y., Sann, J., Shen, L., Yang, J. H., Yao, X., Hu, Y., Wolverton, C., Li, H., et al. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c00820 · Cited by 160
Bauer, I., Kohl, M., Althues, H., & Kaskel, S. (2014) · Chemical Communications · doi:10.1039/c4cc00161c · Cited by 159
Märker, K., Xu, C., & Grey, C. P. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c06727 · Cited by 155
In Situ Observation and Electrochemical Study of Encapsulated Sulfur Nanoparticles by MoS2 Flakes
Tang, W., Chen, Z., Tian, B., Lee, H., Zhao, X., Fan, X., Fan, Y., Leng, K., Peng, C., Kim, M., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05371 · Cited by 154
Building a Better Li‐Garnet Solid Electrolyte/Metallic Li Interface with Antimony
Dubey, R. J. ‐., Sastre, J., Cancellieri, C., Okur, F., Forster, A. C., Pompizii, L., Priebe, A., Romanyuk, Y. E., Jeurgens, L. P. H., Kovalenko, M. V., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202102086 · Cited by 154
Stancovski, V., & Bǎdilescu, S. (2013) · Journal of Applied Electrochemistry · doi:10.1007/s10800-013-0628-0 · Cited by 153
Chi, M., Shi, L., Wang, Z., Zhu, J., Mao, X., Zhao, Y., Zhang, M., Sun, L., & Yuan, S. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.07.037 · Cited by 146
Cai, J., Song, Y., Chen, X., Sun, Z., Yi, Y., Sun, J., & Zhang, Q. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta11958b · Cited by 144
Wang, G., Lai, Y., Zhang, Z., Li, J., & Zhang, Z. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta07133f · Cited by 142
Liu, W., Xia, Y., Wang, W., Wang, Y., Jin, J., Chen, Y., Paek, E., & Mitlin, D. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802918 · Cited by 142
Self-citationSnO 2 as a high-efficiency polysulfide trap in lithium–sulfur batteries
Liu, J., Yuan, L., Yuan, K., Li, Z., Hao, Z., Xiang, J., & Huang, Y. (2016) · Nanoscale · doi:10.1039/c6nr02345b · Cited by 140
All-in-one lithium-sulfur battery enabled by a porous-dense-porous garnet architecture
Xu, S., McOwen, D. W., Zhang, L., Hitz, G. T., Wang, C., Ma, Z., Chen, C., Luo, W. H., Dai, J., Kuang, Y., et al. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.08.009 · Cited by 139
2D Materials for Lithium/Sodium Metal Anodes
Zhang, C., Wang, A., Zhang, J., Guan, X., Tang, W., & Luo, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802833 · Cited by 138
Wu, E. A., Kompella, C. S., Zhu, Z., Lee, J. Z., Lee, S. C., Chu, I., Nguyen, H., Ong, S. P., Banerjee, A., & Meng, Y. S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19037 · Cited by 136
Yan, Z., Liang, Y., Hua, W., Zhang, X., Lai, W., Hu, Z., Wang, W., Peng, J., Indris, S., Wang, Y., et al. (2020) · ACS Nano · doi:10.1021/acsnano.0c03737 · Cited by 136
Shao, H., Ai, F., Wang, W., Zhang, H., Wang, A.-B., Wang, F., & Huang, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta05192a · Cited by 133
A multi-shelled CoP nanosphere modified separator for highly efficient Li–S batteries
Chen, X., Ding, X., Wang, C., Feng, Z., Xu, L., Gao, X. P., Zhai, Y., & Wang, D. (2018) · Nanoscale · doi:10.1039/c8nr03854f · Cited by 132
Potassium Metal as Reliable Reference Electrodes of Nonaqueous Potassium Cells
Hosaka, T., Muratsubaki, S., Kubota, K., Onuma, H., & Komaba, S. (2019) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.9b00711 · Cited by 131
Liu, P., Wang, Y., Hao, H., Basu, S., Feng, X., Xu, Y., Boscoboinik, J. A., Nanda, J., Watt, J. D., & Mitlin, D. (2020) · Advanced Materials · doi:10.1002/adma.202002908 · Cited by 131
Self-citationZeng, P., Huang, L., Zhang, X., Zhang, R., Wu, L., & Chen, Y. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.05.096 · Cited by 128
In situ formed carbon bonded and encapsulated selenium composites for Li–Se and Na–Se batteries
Luo, C. W., Wang, J., Suo, L., Mao, J., Fan, X., & Wang, C. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04611k · Cited by 127
Zhao, Z., Chen, W., Impeng, S., Li, M., Wang, R., Liu, Y., Zhang, L. J., Dong, L., Unruangsri, J., Peng, C., et al. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta13384d · Cited by 127
Zhou, X., Gao, P., Sun, S., Bao, D., Wang, Y., Li, X., Wu, T., Chen, Y., & Yang, P. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02753 · Cited by 124
Hwang, J., Kim, H. M., Yoon, C. S., & Sun, Y. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00037 · Cited by 124
Liu, W., Chen, Z., Zhang, Z., Jiang, P., Chen, Y., Paek, E., Wang, Y., & Mitlin, D. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02423f · Cited by 122
Self-citationMao, X., Shi, L., Zhang, H., Wang, Z., Zhu, J., Qiu, Z., Zhao, Y. H., Zhang, M., & Yuan, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.006 · Cited by 121
Boebinger, M. G., Lewis, J. A., Sandoval, S. E., & McDowell, M. T. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02514 · Cited by 120
Sodium-Sulfur Batteries with a Polymer-Coated NASICON-type Sodium-Ion Solid Electrolyte
Yu, X., & Manthiram, A. (2019) · Matter · doi:10.1016/j.matt.2019.03.008 · Cited by 119
Deng, N., Wang, L., Yang, F. Y., Liu, M., Li, Q., Wang, G., Zhang, L., Kang, W., Cheng, B., & Liu, Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124241 · Cited by 118
A Model for the Behavior of Battery Separators in Compression at Different Strain/Charge Rates
Gor, G. Y., Cannarella, J., Prévost, J. H., & Arnold, C. B. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0111411jes · Cited by 117
Synergistic Effect of Graphene Oxide for Impeding the Dendritic Plating of Li
Foroozan, T., Soto, F. A., Yurkiv, V., Sharifi‐Asl, S., Deivanayagam, R., Huang, Z., Rojaee, R., Mashayek, F., Balbuena, P. B., & Shahbazian‐Yassar, R. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705917 · Cited by 117
Kohl, M., Borrmann, F., Althues, H., & Kaskel, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502185 · Cited by 116
Yao, Y., Xu, R. C., Chen, M., Cheng, X., Zeng, S., Li, D., Zhou, X., Wu, X., & Yu, Y. M. (2019) · ACS Nano · doi:10.1021/acsnano.9b00980 · Cited by 116
Recent Progress of Nanoscale Metal‐Organic Frameworks in Synthesis and Battery Applications
Zhong, M., Kong, L., Zhao, K., Zhang, Y., Li, N., & Bu, X. (2020) · Advanced Science · doi:10.1002/advs.202001980 · Cited by 115
Abbas, S. A., Ding, J., Wu, S. H., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b06478 · Cited by 114
Sun, Z., Wu, X., Peng, Z., Wang, J., Gan, S., Zhang, Y., Han, D., & Niu, L. (2019) · Small · doi:10.1002/smll.201902491 · Cited by 110
Double-Edged Effect of Temperature on Lithium Dendrites
Vishnugopi, B. S., Hao, F., Verma, A., & Mukherjee, P. P. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c04355 · Cited by 110
Swelling and softening of lithium-ion battery separators in electrolyte solvents
Gor, G. Y., Cannarella, J., Leng, C. Z., Vishnyakov, A. M., & Arnold, C. B. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.028 · Cited by 109
Vižintin, A., Chabanne, L., Tchernychova, E., Arčon, I., Stievano, L., Aquilanti, G., Antonietti, M., Fellinger, T., & Dominko, R. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.112 · Cited by 109
Synergistic protective effect of a BN-carbon separator for highly stable lithium sulfur batteries
Kim, P. J. H., Seo, J., Fu, K. K., Choi, J., Liu, Z., Kwon, J., Hu, L., & Paik, U. (2017) · NPG Asia Materials · doi:10.1038/am.2017.51 · Cited by 107
Umeshbabu, E., Zheng, B., Zhu, J., Wang, H., Li, Y., & Yang, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b03726 · Cited by 106
Dendrite‐Free Lithium Anode via a Homogenous Li‐Ion Distribution Enabled by a Kimwipe Paper
Chang, C., Chung, S., & Manthiram, A. (2017) · Advanced Sustainable Systems · doi:10.1002/adsu.201600034 · Cited by 104
Huang, S., Wang, Y., Hu, J., Lim, Y. V., Kong, D., Zheng, Y., Ding, M., Pam, M. E., & Yang, H. Y. (2018) · ACS Nano · doi:10.1021/acsnano.8b04857 · Cited by 104
Xu, G., Yan, Q., Wang, S., Kushima, A., Bai, P., Liu, K., Zhang, X., Tang, Z., & Li, J. (2017) · Chemical Science · doi:10.1039/c7sc01961k · Cited by 103
Constructing multi-functional Janus separator toward highly stable lithium batteries
Wu, X., Liu, N., Guo, Z., Wang, M., Qiu, Y., Tian, D., Guan, B., Fan, L., & Zhang, N. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.03.004 · Cited by 103
Redistributing Li‐Ion Flux by Parallelly Aligned Holey Nanosheets for Dendrite‐Free Li Metal Anodes
Zhou, Y.-G., Zhang, X., Ding, Y., Bae, J., Guo, X.-L., Zhao, Y., & Yu, G.-H. (2020) · Advances in Materials · doi:10.1002/adma.202003920 · Cited by 102
Liu, P., Hao, H., Celio, H., Cui, J., Ren, M., Wang, Y., Dong, H. R., Chowdhury, A. R., Hutter, T., Perras, F. A., et al. (2021) · Advanced Materials · doi:10.1002/adma.202105855 · Cited by 101
Self-citationPonraj, R., Kannan, A. G., Ahn, J. H., Lee, J. H., Kang, J., Han, B., & Kim, D. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10641 · Cited by 99
Cation-Directed Selective Polysulfide Stabilization in Alkali Metal–Sulfur Batteries
Zou, Q., Liang, Z., Du, G.-Y., Liu, C., Li, E. Y., & Lu, Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04536 · Cited by 98
Zhou, T., Zhao, Y., Choi, J. W., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201908513 · Cited by 95
Zuo, P., Hua, J., He, M., Zhang, H., Qian, Z., Ma, Y., Du, C., Cheng, X., Gao, Y., & Yin, G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02245j · Cited by 94
Bifunctional separator as a polysulfide mediator for highly stable Li–S batteries
Abbas, S. A., Ibrahem, M., Hu, L., Lin, C., Fang, J., Boopathi, K. M., Wang, P., Li, L., & Chu, C. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02272c · Cited by 93
Zeng, F., Jin, Z., Yuan, K., Liu, S., Cheng, X., Wang, A., Wang, W., & Yang, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02680j · Cited by 93
Realizing Dendrite-Free Lithium Deposition with a Composite Separator
Yan, J., Liu, F., Hu, Z., Gao, J., Zhou, W., Huo, H., Zhou, J., & Li, L. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c00819 · Cited by 91
Chen, G., Song, X., Wang, S., Wang, Y., Gao, T., Ding, L., & Wang, H. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.11.026 · Cited by 90
Yang, C., Li, P., Yu, J., Zhao, L., & Kong, L. (2020) · Energy · doi:10.1016/j.energy.2020.117718 · Cited by 90
Balach, J., Jaumann, T., Mühlenhoff, S., Eckert, J., & Giebeler, L. (2016) · Chemical Communications · doi:10.1039/c6cc03743g · Cited by 84
Li, M., Wang, C., Miao, L., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00459e · Cited by 84
Guo, H., Li, X., Zhang, X., Wang, H., Wang, Z., & Peng, W. (2007) · New Carbon Materials · doi:10.1016/s1872-5805(07)60006-7 · Cited by 83
Liu, Y., Dai, H., An, Y., Fu, L., An, Q., & Wu, Y. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04513f · Cited by 82
Nelson, P. A., Office of Sustainable Transportation. Vehicle Technologies Office (VTO) USDOE Office of Energy Efficiency and Renewable Energy (EERE), Gallagher, K., Bloom, I., & Dees, D. W. (2012) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1209682 · Cited by 80
Luo, L., Chung, S., & Manthiram, A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07709a · Cited by 79
Vivek, J. P., Berry, N. G., Zou, J., Nichols, R. J., & Hardwick, L. J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06391 · Cited by 79
Nie, L., Li, Y., Chen, S., Li, K., Huang, Y., Zhu, Y., Sun, Z.-T., Zhang, J., He, Y., Cui, M., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08656 · Cited by 78
Conducting polymer paper-derived separators for lithium metal batteries
Wang, Z.-H., Pan, R., Xu, C.-D., Ruan, C.-Q., Edström, K., Strømme, M., & Nyholm, L. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.006 · Cited by 76
Wu, F., Qian, J., Chen, R., Ye, Y., Sun, Z., Xing, Y., & Li, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06516c · Cited by 74
The Na-S (Sodium-Sulfur) system
Sangster, J. M., & Pelton, A. D. (1997) · Journal of Phase Equilibria · doi:10.1007/bf02646762 · Cited by 74
Fan, S., Huang, S., Pam, M. E., Chen, S., Wu, Q., Hu, J., Wang, Y., Ang, L. K., Yan, C., Shi, Y., et al. (2019) · Small · doi:10.1002/smll.201906132 · Cited by 73
Casas, X., Niederberger, M., & Lizundia, E. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c05262 · Cited by 73
Lagadec, M. F., Ebner, M., Zahn, R., & Wood, V. C. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0811606jes · Cited by 72
Amara, S., Toulc'Hoat, J., Timperman, L., Biller, A., Galiano, H., Marcel, C., Digabel, M. L., & Anouti, M. (2019) · ChemPhysChem · doi:10.1002/cphc.201801064 · Cited by 69
Shen, Z., Zhang, W., Li, S., Mao, S., Wang, X., Chen, F., & Lü, Y. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c02371 · Cited by 68
Deng, N., Liu, Y., Li, Q., Yan, J., Zhang, L., Wang, L., Zhang, Y., Cheng, B., Lei, W., & Kang, W. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122918 · Cited by 65
Metal Organic Framework Derivative Improving Lithium Metal Anode Cycling
Zhong, Y., Lin, F., Wang, M., Zhang, Y., Ma, Q., Lin, J., Feng, Z., & Wang, H. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907579 · Cited by 65
High Performance Li Metal Anode Enabled by Robust Covalent Triazine Framework‐Based Protective Layer
Zheng, Y., Xia, S., Dong, F., Sun, H., Pang, Y., Yang, J., Huang, Y., & Zheng, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202006159 · Cited by 64
Song, Y., Yuan, J.-J., Yin, X., Zhang, Y., Lin, C., Sun, C., Fang, L., Zhu, B., & Zhu, L.-P. (2018) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2018.03.044 · Cited by 61
Li, X., Liu, Y., Pan, Y., Wang, M., Chen, J., Xu, H., Huang, Y., Lau, W., Shan, A., Zheng, J., et al. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06908a · Cited by 60
Self-citationHe, D., Meng, J., Chen, X., Liao, Y., Cheng, Z., Yuan, L., Li, Z., & Huang, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001201 · Cited by 60
Zhao, X., Zhu, Q., Xu, S., Chen, L., Zuo, Z., Wang, X., Liu, S., & Zhang, D. (2018) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2018.11.021 · Cited by 57
Chen, M., Chen, Z., Fu, X., et al. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta01989e · Cited by 57
Material and Interfacial Modification toward a Stable Room-Temperature Solid-State Na–S Battery
An, T., Jia, H., Peng, L., & Xie, J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c03899 · Cited by 57
Liu, W., Li, P., Wang, W., Zhu, D., Chen, Y., Pen, S., Paek, E., & Mitlin, D. (2018) · ACS Nano · doi:10.1021/acsnano.8b06051 · Cited by 56
Self-citationYe, Y., Wang, L., Guan, L., Wu, F., Qian, J., Zhao, T., Zhang, X., Xing, Y., Shi, J., Li, L., et al. (2017) · Energy storage materials · doi:10.1016/j.ensm.2017.07.004 · Cited by 55
Designing a Multifunctional Separator for High‐Performance Li–S Batteries at Elevated Temperature
He, Y., Wu, S., Li, Q., & Zhou, H. S. (2019) · Small · doi:10.1002/smll.201904332 · Cited by 54
Yang, Y., Li, B., Li, L., Seeger, S., & Zhang, J. (2019) · iScience · doi:10.1016/j.isci.2019.06.010 · Cited by 53
Chem‐Bonding and Phys‐Trapping Se Electrode for Long‐Life Rechargeable Batteries
Wu, T., Ding, Z., Jing, M., Zou, G., Hou, H., Tian, Y., Jiang, Y., Hong, W., & Ji, X. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201809014 · Cited by 50
Nanoindentation testing of separators for lithium-ion batteries
Halalay, I. C., Lukitsch, M. J., Balogh, M. P., & Wong, C. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.04.036 · Cited by 48
An alkali metal–selenium battery with a wide temperature range and low self-discharge
Zhao, X., Yin, L., Yang, Z., et al. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta07630a · Cited by 47
Jovanović, P., Mirshekarloo, M. S., Hill, M. R., Hollenkamp, A. F., Majumder, M., & Shaibani, M. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202001136 · Cited by 45
Saroja, A. P. V. K., Muthusamy, K., & Ramaprabhu, S. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201801873 · Cited by 44
Strain‐rate‐dependent mechanical properties of polypropylene separator for lithium‐ion batteries
Moghim, M. H., Bayani, A. N., & Eqra, R. (2020) · Polymer International · doi:10.1002/pi.5986 · Cited by 41
The Li-S (lithium-sulfur) system
Okamoto, H. (1995) · Journal of Phase Equilibria · doi:10.1007/bf02646258 · Cited by 39
Raberg, J. H., Vatamanu, J., Harris, S. J., van Oversteeg, C. H. M., Ramos, A., Borodin, O. A., & Cuk, T. (2019) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.9b00879 · Cited by 38
Funari, V., Gomes, H. I., Coppola, D., Vitale, G. A., Dinelli, E., de Pascale, D., & Rovere, M. (2021) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2021.105593 · Cited by 37
Organosulfur Compounds Enable Uniform Lithium Plating and Long-Term Battery Cycling Stability
Boateng, B., Han, Y., Zhen, C., Zeng, G., Chen, N., Chen, D., Feng, C., Han, J., Xiong, J., Duan, X., et al. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c00074 · Cited by 36
Uniform metal-ion flux through interface-modified membrane for highly stable metal batteries
Kim, P., Kim, K.-H., & Pol, V. G. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.06.177 · Cited by 35
Wu, C., Lai, W., Cai, X., Chou, S., Liu, H., Wang, Y., & Dou, S. X. (2021) · Small · doi:10.1002/smll.202006504 · Cited by 34
Zhang, Y., Zhang, Y., Guo, Y. F., et al. (2020) · Carbon · doi:10.1016/j.carbon.2020.01.102 · Cited by 33
Alloying of Alkali Metals with Tellurene
Jain, R., Yuan, Y., Singh, Y., Basu, S., Wang, D., Yang, A., Wang, X., Rong, M., Lee, H. J., Frey, D. M., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202003248 · Cited by 24
Self-citationKim, J., Kim, J., Kim, M.-K., & Byeon, J.-W. (2020) · Microelectronics Reliability · doi:10.1016/j.microrel.2020.113818 · Cited by 11
Chen, Z., Wang, Y., Xiong, B., & Zhu, J. (2020) · Polymer · doi:10.1016/j.polymer.2020.122832 · Cited by 9
Kim, J., Yoo, K. T., Kim, D. O., Lee, M. H., Yang, W.-J., & Byeon, J. W. (2019) · Microelectronics Reliability · doi:10.1016/j.microrel.2019.113441 · Cited by 6
Stress-Induced Capacity Fade Due to Separator Creep in Lithium-Ion Cells
Cannarella, J., Peabody, C., & Arnold, C. B. (2012) · ECS Meeting Abstracts · doi:10.1149/ma2012-01/23/975 · Cited by 1
Cited by
Xiao, P., Yun, X., Chen, Y., Guo, X., Gao, P., Zhou, G., & Zheng, C. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00151b · Cited by 443
Gel polymer electrolytes for rechargeable batteries toward wide-temperature applications
Zhou, X., Zhou, Y., Yu, L., Qi, L., Oh, K.-S., Hu, P., Lee, S.-Y., & Chen, C. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00551h · Cited by 333
Yao, W., Xu, J., Ma, L., Lu, X., Luo, D., Qian, J., Zhan, L., Manke, I., Yang, C., Adelhelm, P., et al. (2023) · Advanced Materials · doi:10.1002/adma.202212116 · Cited by 317
Metadata
- Authors
- Hao, H., Hutter, T., Boyce, B. L., Watt, J., Liu, P., & Mitlin, D.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-03-29
- Volume
- 122
- Issue
- 9
- Pages
- 8053-8125
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W4220815223
- Cited by
- 314
- References
- 329
- FWCI
- 3.77
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.