The DOI matches its Crossref record; 329 of the 329 references it cites were found in a registry or an index.
Review of Multifunctional Separators: Stabilizing the Cathode and the Anode for Alkali (Li, Na, and K) Metal–Sulfur and Selenium Batteries
Open accessAbstract
Alkali metal batteries based on lithium, sodium, and potassium anodes and sulfur-based cathodes are regarded as key for next-generation energy storage due to their high theoretical energy and potential cost effectiveness. However, metal–sulfur batteries remain challenged by several factors, including polysulfides’ (PSs) dissolution, sluggish sulfur redox kinetics at the cathode, and metallic dendrite growth at the anode. Functional separators and interlayers are an innovative approach to remedying these drawbacks. Here we critically review the state-of-the-art in separators/interlayers for cathode and anode protection, covering the Li–S and the emerging Na–S and K–S systems. The approaches for improving electrochemical performance may be categorized as one or a combination of the following: Immobilization of polysulfides (cathode); catalyzing sulfur redox kinetics (cathode); introduction of protective layers to serve as an artificial solid electrolyte interphase (SEI) (anode); and combined improvement in electrolyte wetting and homogenization of ion flux (anode and cathode). It is demonstrated that while the advances in Li–S are relatively mature, less progress has been made with Na–S and K–S due to the more challenging redox chemistry at the cathode and increased electrochemical instability at the anode. Throughout these sections there is a complementary discussion of functional separators for emerging alkali metal systems based on metal–selenium and the metal–selenium sulfide. The focus then shifts to interlayers and artificial SEI/cathode electrolyte interphase (CEI) layers employed to stabilize solid-state electrolytes (SSEs) in metal–sulfur solid-state batteries (SSBs). The discussion of SSEs focuses on inorganic electrolytes based on Li- and Na-based oxides and sulfides but also touches on some hybrid systems with an inorganic matrix and a minority polymer phase. The review then moves to practical considerations for functional separators, including scaleup issues and Li–S technoeconomics. The review concludes with an outlook section, where we discuss emerging mechanics, spectroscopy, and advanced electron microscopy ( e.g . cryo-transmission electron microscopy (cryo-TEM) and cryo-focused ion beam (cryo-FIB))-based approaches for analysis of functional separator structure–battery electrochemical performance interrelations. Throughout the review we identify the outstanding open scientific and technological questions while providing recommendations for future research topics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Covalent organic frameworks (COFs): from design to applications
Ding, S.-Y., & Wang, W. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35072f · Cited by 4,020
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,250
A reflection on lithium-ion battery cathode chemistry
Manthiram, A. (2020) · Nature Communications · doi:10.1038/s41467-020-15355-0 · Cited by 2,796
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Review—SEI: Past, Present and Future
Peled, E., & Menkin, S. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1441707jes · Cited by 2,182
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Zhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes
Han, F., Westover, A. S., Yue, J., Fan, X., Wang, F., Chi, M., Leonard, D. N., Dudney, N. J., Wang, H., & Wang, C. (2019) · Nature Energy · doi:10.1038/s41560-018-0312-z · Cited by 1,695
Chen, R., Li, Q., Yu, X., Chen, L., & Li, H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00268 · Cited by 1,678
Interface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Atomic structure of sensitive battery materials and interfaces revealed by cryo–electron microscopy
Li, Y., Li, Y., Pei, A., Yan, K., Sun, Y., Wu, C.-L., Joubert, L.-M., Chin, R., Koh, A. L., Yu, Y., et al. (2017) · Science · doi:10.1126/science.aam6014 · Cited by 1,547
Polymer Electrolytes for Lithium-Based Batteries: Advances and Prospects
Zhou, D., Shanmukaraj, D., Tkacheva, A., Armand, M., & Wang, G. (2019) · Chem · doi:10.1016/j.chempr.2019.05.009 · Cited by 1,539
Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes
Banerjee, A., Wang, X., Fang, C., Wu, E. A., & Meng, Y. S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00101 · Cited by 1,526
Du, Z., Chen, X., Hu, W., Chuang, C., Xie, S., Hu, A., Yan, W., Kong, X., Wu, X., Ji, H., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b12973 · Cited by 1,490
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Electrochemical aspects of the generation of ramified metallic electrodeposits
Chazalviel, J.-N. (1990) · Physical Review A · doi:10.1103/physreva.42.7355 · Cited by 1,402
Metal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Seino, Y., Ota, T., Takada, K., Hayashi, A., & Tatsumisago, M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee41655k · Cited by 1,302
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Garnet-Type Solid-State Electrolytes: Materials, Interfaces, and Batteries
Wang, C., Fu, K., Kammampata, S. P., McOwen, D. W., Samson, A. J., Zhang, L., Hitz, G. T., Nolan, A. M., Wachsman, E. D., Mo, Y., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00427 · Cited by 1,212
Recent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries
Fan, L., Wei, S., Li, S., Li, Q., & Lu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702657 · Cited by 1,179
Zhou, T., Lv, W., Li, J., Zhou, G., Zhao, Y., Fan, S., Liu, B., Li, B., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01430a · Cited by 1,056
Towards K‐Ion and Na‐Ion Batteries as “Beyond Li‐Ion”
Kubota, K., Dahbi, M., Hosaka, T., Kumakura, S., & Komaba, S. (2018) · The Chemical Record · doi:10.1002/tcr.201700057 · Cited by 1,015
Mechanism and Kinetics of Li2S Precipitation in Lithium–Sulfur Batteries
Fan, F. Y., Carter, W. C., & Chiang, Y. (2015) · Advanced Materials · doi:10.1002/adma.201501559 · Cited by 987
Hard Carbon Microspheres: Potassium‐Ion Anode Versus Sodium‐Ion Anode
Jian, Z., Xing, Z., Bommier, C., Li, Z., & Ji, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501874 · Cited by 985
A Highly Reversible Room-Temperature Sodium Metal Anode
Seh, Z. W., Sun, J., Sun, Y., & Cui, Y. (2015) · ACS Central Science · doi:10.1021/acscentsci.5b00328 · Cited by 979
Lin, H., Yang, L., Jiang, X., Li, G., Zhang, T., Yao, Q., Zheng, G. W., & Lee, J. Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01047h · Cited by 952
Barchasz, C., Molton, F., Duboc, C., Leprêtre, J.-C., Patoux, S., & Alloin, F. (2012) · Analytical Chemistry · doi:10.1021/ac2032244 · Cited by 946
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Self-citationMoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries
Ghazi, Z. A., He, X., Khattak, A. M., Khan, N. A., Liang, B., Iqbal, A., Wang, J., Sin, H., Li, L., & Tang, Z. (2017) · Advanced Materials · doi:10.1002/adma.201606817 · Cited by 902
Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries
Krauskopf, T., Richter, F. H., Zeier, W. G., & Janek, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00431 · Cited by 892
Anomalous High Ionic Conductivity of Nanoporous β-Li3PS4
Liu, Z., Fu, W., Payzant, E. A., Yu, X., Wu, Z., Dudney, N. J., Kiggans, J., Hong, K., Rondinone, A. J., & Liang, C. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3110895 · Cited by 879
A Perspective toward Practical Lithium–Sulfur Batteries
Zhao, M., Li, B.-Q., Zhang, X.-Q., Huang, J.-Q., & Zhang, Q. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00449 · Cited by 858
Cryo-STEM mapping of solid–liquid interfaces and dendrites in lithium-metal batteries
Zachman, M. J., Tu, Z., Choudhury, S., Archer, L. A., & Kourkoutis, L. F. (2018) · Nature · doi:10.1038/s41586-018-0397-3 · Cited by 823
Characterization and performance evaluation of lithium-ion battery separators
Lagadec, M. F., Zahn, R., & Wood, V. (2018) · Nature Energy · doi:10.1038/s41560-018-0295-9 · Cited by 812
Dendrite Growth in Lithium/Polymer Systems
Monroe, C., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1606686 · Cited by 800
Aurbach, D., Markovsky, B., Shechter, A., Ein‐Eli, Y., & Cohen, H. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1837300 · Cited by 760
Su, Y.-S., & Manthiram, A. (2012) · Chemical Communications · doi:10.1039/c2cc33945e · Cited by 755
Lithium-Sulfur Batteries: Attaining the Critical Metrics
Bhargav, A., He, J., Gupta, A., & Manthiram, A. (2020) · Joule · doi:10.1016/j.joule.2020.01.001 · Cited by 736
Zhang, L., Liu, D., Muhammad, Z., Wan, F., Xie, W., Wang, Y., Song, L., Niu, Z., & Chen, J. (2019) · Advanced Materials · doi:10.1002/adma.201903955 · Cited by 713
Direct Calculation of Li-Ion Transport in the Solid Electrolyte Interphase
Shi, S., Lu, P., Liu, Z., Qi, Y., Hector, L. G., Li, H., & Harris, S. J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja305366r · Cited by 712
Revisiting the Role of Polysulfides in Lithium–Sulfur Batteries
Li, G., Wang, S., Zhang, Y., Li, M., Chen, Z., & Lu, J. (2018) · Advanced Materials · doi:10.1002/adma.201705590 · Cited by 711
Liu, W., Liu, P., & Mitlin, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002297 · Cited by 687
Self-citationWang, C., Gong, Y., Liu, B., Fu, K., Yao, Y., Hitz, E., Li, Y., Dai, J., Xu, S., Luo, W., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04695 · Cited by 682
Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries
Huang, J.-Q., Zhang, Q., Peng, H.-J., Liu, X.-Y., Qian, W.-Z., & Wei, F. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42223b · Cited by 679
Artificial Soft–Rigid Protective Layer for Dendrite‐Free Lithium Metal Anode
Xu, R., Zhang, X., Cheng, X., Peng, H., Zhao, C., Yan, C., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705838 · Cited by 670
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
A High‐Energy Room‐Temperature Sodium‐Sulfur Battery
Xin, S., Yin, Y., Guo, Y., & Wan, L. (2014) · Advanced Materials · doi:10.1002/adma.201304126 · Cited by 632
Abouimrane, A., Dambournet, D., Chapman, K. W., Chupas, P. J., Weng, W., & Amine, K. (2012) · Journal of the American Chemical Society · doi:10.1021/ja211766q · Cited by 628
Yuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802768 · Cited by 626
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Wenzel, S., Leichtweiss, T., Krüger, D., Sann, J., & Janek, J. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.06.001 · Cited by 607
Gao, J., Lowe, M. A., Kiya, Y., & Abruña, H. D. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp207714c · Cited by 600
A Flexible Sulfur‐Graphene‐Polypropylene Separator Integrated Electrode for Advanced Li–S Batteries
Zhou, G., Li, L., Wang, D., Shan, X., Pei, S., Li, F., & Cheng, H. (2015) · Advanced Materials · doi:10.1002/adma.201404210 · Cited by 590
A stable room-temperature sodium–sulfur battery
Wei, S., Xu, S., Agrawral, A., Choudhury, S., Lu, Y., Tu, Z., Ma, L., & Archer, L. A. (2016) · Nature Communications · doi:10.1038/ncomms11722 · Cited by 589
A Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries
Peng, H., Zhang, Z., Huang, J., Zhang, G., Xie, J., Xu, W., Shi, J., Chen, X., Cheng, X., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201603401 · Cited by 583
Extremely Stable Sodium Metal Batteries Enabled by Localized High-Concentration Electrolytes
Zheng, J., Chen, S., Zhao, W., Song, J., Engelhard, M. H., & Zhang, J.-G. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01213 · Cited by 579
Pang, Q., Shyamsunder, A., Narayanan, B., Kwok, C. Y., Curtiss, L. A., & Nazar, L. F. (2018) · Nature Energy · doi:10.1038/s41560-018-0214-0 · Cited by 573
He, J., Chen, Y., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00893k · Cited by 565
A room-temperature sodium–sulfur battery with high capacity and stable cycling performance
Xu, X., Zhou, D., Qin, X., Lin, K., Kang, F., Li, B., Shanmukaraj, D., Rojo, T., Armand, M., & Wang, G. (2018) · Nature Communications · doi:10.1038/s41467-018-06443-3 · Cited by 563
Garnet Electrolyte with an Ultralow Interfacial Resistance for Li-Metal Batteries
Li, Y., Chen, X., Dolocan, A., Cui, Z., Xin, S., Xue, L., Xu, H., Park, K., & Goodenough, J. B. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b03106 · Cited by 556
Understanding High-Energy-Density Sn4P3 Anodes for Potassium-Ion Batteries
Zhang, W., Pang, W. K., Sencadas, V., & Guo, Z. (2018) · Joule · doi:10.1016/j.joule.2018.04.022 · Cited by 555
The importance of the lithium ion transference number in lithium/polymer cells
Doyle, M., Fuller, T. F., & Newman, J. (1994) · Electrochimica Acta · doi:10.1016/0013-4686(94)85091-7 · Cited by 553
Deciphering the Modulation Essence of p Bands in Co-Based Compounds on Li-S Chemistry
Zhou, J., Liu, X., Zhu, L., Zhou, J., Guan, Y., Chen, L., Niu, S., Cai, J., Sun, D., Zhu, Y., et al. (2018) · Joule · doi:10.1016/j.joule.2018.08.010 · Cited by 548
Cheng, L., Crumlin, E. J., Chen, W., Qiao, R., Hou, H., Franz Lux, S., Zorba, V., Russo, R., Kostecki, R., Liu, Z., et al. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp02921f · Cited by 545
Song, Y., Zhao, W., Kong, L., Zhang, L., Zhu, X., Shao, Y., Ding, F., Zhang, Q., Sun, J., & Liu, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01402g · Cited by 539
Wang, J., Huang, W., Pei, A., Li, Y., Shi, F., Yu, X., & Cui, Y. (2019) · Nature Energy · doi:10.1038/s41560-019-0413-3 · Cited by 528
Yao, H., Yan, K., Li, W., Zheng, G., Kong, D., Seh, Z. W., Narasimhan, V. K., Liang, Z., & Cui, Y. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01377h · Cited by 526
Yang, X., Luo, J., & Sun, X. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00635d · Cited by 520
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Entrapment of Polysulfides by a Black‐Phosphorus‐Modified Separator for Lithium–Sulfur Batteries
Sun, J., Sun, Y., Pasta, M., Zhou, G., Li, Y., Liu, W., Xiong, F., & Cui, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602172 · Cited by 516
Dual‐Layered Film Protected Lithium Metal Anode to Enable Dendrite‐Free Lithium Deposition
Yan, C., Cheng, X., Tian, Y., Chen, X., Zhang, X., Li, W., Huang, J., & Zhang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201707629 · Cited by 513
Samson, A. J., Hofstetter, K., Bag, S., & Thangadurai, V. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01548e · Cited by 502
Lei, T., Chen, W., Lv, W., Huang, J., Zhu, J., Chu, J., Yan, C., Wu, C., Yan, Y., He, W., et al. (2018) · Joule · doi:10.1016/j.joule.2018.07.022 · Cited by 493
In situ analytical techniques for battery interface analysis
Tripathi, A. M., Su, W.-N., & Hwang, B. J. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00180k · Cited by 488
Li, Z., Yuan, L., Yi, Z., Sun, Y., Liu, Y., Jiang, Y., Shen, Y., Xin, Y., Zhang, Z., & Huang, Y. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301473 · Cited by 481
Ryou, M., Lee, D. J., Lee, J., Lee, Y. M., Park, J., & Choi, J. W. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100687 · Cited by 473
Fatigue Properties of Highly Oriented Polypropylene Tapes and All-Polypropylene Composites
Barkoula, N.-M., Alcock, B., Cabrera, N. O., & Peijs, T. (2008) · Polymers and Polymer Composites · doi:10.1177/096739110801600203 · Cited by 465
Solubility of the Solid Electrolyte Interphase (SEI) in Sodium Ion Batteries
Mogensen, R., Brandell, D., & Younesi, R. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00491 · Cited by 464
Making Li-metal electrodes rechargeable by controlling the dendrite growth direction
Liu, Y., Liu, Q., Xin, L., Liu, Y., Yang, F., Stach, E. A., & Xie, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.83 · Cited by 464
An ion redistributor for dendrite-free lithium metal anodes
Zhao, C., Chen, P., Zhang, R., Chen, X., Li, B., Zhang, X., Cheng, X., & Zhang, Q. (2018) · Science Advances · doi:10.1126/sciadv.aat3446 · Cited by 464
Zhou, Y., Su, M., Yu, X., Zhang, Y., Wang, J.-G., Ren, X., Cao, R., Xu, W., Baer, D. R., Du, Y., et al. (2020) · Nature Nanotechnology · doi:10.1038/s41565-019-0618-4 · Cited by 463
Surface Chemistry in Cobalt Phosphide-Stabilized Lithium–Sulfur Batteries
Zhong, Y., Yin, L., He, P., Liu, W., Wu, Z., & Wang, H. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b11434 · Cited by 458
Materials’ Methods: NMR in Battery Research
Pecher, O., Carretero-González, J., Griffith, K. J., & Grey, C. P. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03183 · Cited by 452
Dong, Y., Zheng, S., Qin, J., Zhao, X., Shi, H., Wang, X., Chen, J., & Wu, Z.-S. (2018) · ACS Nano · doi:10.1021/acsnano.7b07672 · Cited by 446
A Two-Dimensional Porous Carbon-Modified Separator for High-Energy-Density Li-S Batteries
Pei, F., Lin, L., Fu, A., Mo, S., Ou, D., Fang, X., & Zheng, N. (2018) · Joule · doi:10.1016/j.joule.2017.12.003 · Cited by 442
Rational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
A Comprehensive Understanding of Lithium–Sulfur Battery Technology
Li, T., Bai, X., Gulzar, U., Bai, Y., Capiglia, C., Deng, W., Zhou, X., Liu, Z., Feng, Z., & Proietti Zaccaria, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901730 · Cited by 422
Al2O3-coated porous separator for enhanced electrochemical performance of lithium sulfur batteries
Zhang, Z., Lai, Y., Zhang, Z., Zhang, K., & Li, J. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.02.077 · Cited by 418
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.041 · Cited by 414
Zhao, Y., Wang, L., Zhou, Y., Liang, Z., Tavajohi, N., Li, B., & Li, T. (2021) · Advanced Science · doi:10.1002/advs.202003675 · Cited by 387
Electrochemical Alloying of Lithium in Organic Electrolytes
Dey, A. N. (1971) · Journal of The Electrochemical Society · doi:10.1149/1.2407783 · Cited by 385
Li, C., Liu, S., Shi, C., Liang, G., Lu, Z., Fu, R., & Wu, D. (2019) · Nature Communications · doi:10.1038/s41467-019-09211-z · Cited by 384
Ultrathin Surface Coating Enables the Stable Sodium Metal Anode
Luo, W., Lin, C., Zhao, O., Noked, M., Zhang, Y., Rubloff, G. W., & Hu, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601526 · Cited by 380
Stable Cycling of Lithium Metal Batteries Using High Transference Number Electrolytes
Lu, Y., Tikekar, M., Mohanty, R., Hendrickson, K., Ma, L., & Archer, L. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402073 · Cited by 377
Kong, W., Yan, L., Luo, Y., Wang, D., Jiang, K., Li, Q., Fan, S., & Wang, J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606663 · Cited by 376
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201402893 · Cited by 364
Conder, J., Bouchet, R., Trabesinger, S., Marino, C., Gubler, L., & Villevieille, C. (2017) · Nature Energy · doi:10.1038/nenergy.2017.69 · Cited by 362
Bommier, C., & Ji, X. (2018) · Small · doi:10.1002/smll.201703576 · Cited by 358
A Thermally Conductive Separator for Stable Li Metal Anodes
Luo, W., Zhou, L., Fu, K., Yang, Z., Wan, J., Manno, M., Yao, Y., Zhu, H., Yang, B., & Hu, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02432 · Cited by 356
Eshetu, G. G., Judez, X., Li, C., Martinez-Ibañez, M., Gracia, I., Bondarchuk, O., Carrasco, J., Rodriguez-Martinez, L. M., Zhang, H., & Armand, M. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04612 · Cited by 351
Peng, H., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500268 · Cited by 348
Park, J., Yu, B., Park, J. S., Choi, J. W., Kim, C., Sung, Y., & Goodenough, J. B. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602567 · Cited by 348
Radical or Not Radical: Revisiting Lithium–Sulfur Electrochemistry in Nonaqueous Electrolytes
Cuisinier, M., Hart, C. J., Balasubramanian, M., Garsuch, A., & Nazar, L. F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401801 · Cited by 347
Zhuang, T., Huang, J., Peng, H., He, L., Cheng, X., Chen, C., & Zhang, Q. (2016) · Small · doi:10.1002/smll.201503133 · Cited by 346
Garnet Solid Electrolyte for Advanced All‐Solid‐State Li Batteries
Xu, L., Li, J., Deng, W., Shuai, H., Li, S., Xu, Z., Li, J., Hou, H., Peng, H., Zou, G., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000648 · Cited by 344
Suppressing the Shuttle Effect and Dendrite Growth in Lithium–Sulfur Batteries
Wang, J., Yi, S., Liu, J., Sun, S., Liu, Y., Yang, D., Xi, K., Gao, G., Abdelkader, A., Yan, W., et al. (2020) · ACS Nano · doi:10.1021/acsnano.0c02241 · Cited by 344
Anion‐Sorbent Composite Separators for High‐Rate Lithium‐Ion Batteries
Zhang, C., Shen, L., Shen, J., Liu, F., Chen, G., Tao, R., Ma, S., Peng, Y., & Lu, Y. (2019) · Advanced Materials · doi:10.1002/adma.201808338 · Cited by 341
Tian, Y., Li, G., Zhang, Y., Luo, D., Wang, X., Zhao, Y., Liu, H., Ji, P., Du, X., Li, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.201904876 · Cited by 340
3D Flexible Carbon Felt Host for Highly Stable Sodium Metal Anodes
Chi, S., Qi, X., Hu, Y., & Fan, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702764 · Cited by 332
Chen, X., Peng, L., Wang, L., Yang, J., Hao, Z., Xiang, J., Yuan, K., Huang, Y., Shan, B., Yuan, L., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08818-6 · Cited by 328
Revitalising sodium–sulfur batteries for non-high-temperature operation: a crucial review
Wang, Y., Zhou, D., Palomares, V., Shanmukaraj, D., Sun, B., Tang, X., Wang, C., Armand, M., Rojo, T., & Wang, G. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02203a · Cited by 327
Iermakova, D. I., Dugas, R., Palacín, M. R., & Ponrouch, A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0091513jes · Cited by 325
Xu, J., Ma, J., Fan, Q., Guo, S., & Dou, S. (2017) · Advanced Materials · doi:10.1002/adma.201606454 · Cited by 319
Perspectives for restraining harsh lithium dendrite growth: Towards robust lithium metal anodes
Wu, F., Yuan, Y.-X., Cheng, X.-B., Bai, Y., Li, Y., Wu, C., & Zhang, Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.03.024 · Cited by 319
Tu, S., Chen, X., Zhao, X., Cheng, M., Xiong, P., He, Y., Zhang, Q., & Xu, Y. (2018) · Advanced Materials · doi:10.1002/adma.201804581 · Cited by 319
A High‐Performance Monolithic Solid‐State Sodium Battery with Ca2+ Doped Na3Zr2Si2PO12 Electrolyte
Lu, Y., Alonso, J. A., Yi, Q., Lu, L., Wang, Z. L., & Sun, C. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901205 · Cited by 319
Wang, R., Yang, J., Chen, X., Zhao, Y., Zhao, W., Qian, G., Li, S., Xiao, Y., Chen, H., Ye, Y., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903550 · Cited by 315
An Autotransferable g‐C3N4 Li+‐Modulating Layer toward Stable Lithium Anodes
Guo, Y., Niu, P., Liu, Y., Ouyang, Y., Li, D., Zhai, T., Li, H., & Cui, Y. (2019) · Advanced Materials · doi:10.1002/adma.201900342 · Cited by 314
Wang, W., Cao, Z., Elia, G. A., Wu, Y., Wahyudi, W., Abou-Hamad, E., Emwas, A.-H., Cavallo, L., Li, L.-J., & Ming, J. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01945 · Cited by 312
Confined Sulfur in Microporous Carbon Renders Superior Cycling Stability in Li/S Batteries
Xu, Y., Wen, Y., Zhu, Y., Gaskell, K., Cychosz, K. A., Eichhorn, B., Xu, K., & Wang, C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500983 · Cited by 311
Capacity Fade Analysis of Sulfur Cathodes in Lithium–Sulfur Batteries
Yan, J., Liu, X., & Li, B. (2016) · Advanced Science · doi:10.1002/advs.201600101 · Cited by 307
Grain Boundary Contributions to Li-Ion Transport in the Solid Electrolyte Li7La3Zr2O12 (LLZO)
Yu, S., & Siegel, D. J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02805 · Cited by 304
Steudel, R., & Chivers, T. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00826d · Cited by 304
Rana, M., Ahad, S. A., Li, M., Luo, B., Wang, L., Gentle, I., & Knibbe, R. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.12.024 · Cited by 301
Hong, X.-J., Song, C.-L., Yang, Y., Tan, H.-C., Li, G.-H., Cai, Y.-P., & Wang, H. (2019) · ACS Nano · doi:10.1021/acsnano.8b08155 · Cited by 301
Tian, H., Tian, H., Wang, S., Chen, S., Zhang, F., Song, L., Liu, H., Liu, J., & Wang, G. (2020) · Nature Communications · doi:10.1038/s41467-020-18820-y · Cited by 298
Engineering Oxygen Vacancies in a Polysulfide‐Blocking Layer with Enhanced Catalytic Ability
Li, Z., Zhou, C., Hua, J., Hong, X., Sun, C., Li, H., Xu, X., & Mai, L. (2020) · Advanced Materials · doi:10.1002/adma.201907444 · Cited by 292
Liu, K., Zhuo, D., Lee, H., Liu, W., Lin, D., Lu, Y., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201603987 · Cited by 288
Zeng, L., Zeng, W., Jiang, Y., Wei, X., Li, W., Yang, C., Zhu, Y., & Yu, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401377 · Cited by 285
Li, Z., Zhang, J., Lu, Y., & Lou, X. W. (. (2018) · Science Advances · doi:10.1126/sciadv.aat1687 · Cited by 279
Temperature‐Dependent Nucleation and Growth of Dendrite‐Free Lithium Metal Anodes
Yan, K., Wang, J., Zhao, S., Zhou, D., Sun, B., Cui, Y., & Wang, G. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201905251 · Cited by 273
Engineering of lithium-metal anodes towards a safe and stable battery
Wang, L., Zhou, Z., Yan, X., Hou, F., Wen, L., Luo, W., Liang, J., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.014 · Cited by 270
Hou, Z., Gao, Y., Tan, H., & Zhang, B. (2021) · Nature Communications · doi:10.1038/s41467-021-23352-0 · Cited by 267
Porous graphene oxide/carbon nanotube hybrid films as interlayer for lithium-sulfur batteries
Huang, J.-Q., Xu, Z.-L., Abouali, S., Akbari Garakani, M., & Kim, J.-K. (2016) · Carbon · doi:10.1016/j.carbon.2015.12.081 · Cited by 266
Yan, C., Cheng, X.-B., Zhao, C.-Z., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.056 · Cited by 255
Stabilizing a High-Energy-Density Rechargeable Sodium Battery with a Solid Electrolyte
Gao, H., Xin, S., Xue, L., & Goodenough, J. B. (2018) · Chem · doi:10.1016/j.chempr.2018.01.007 · Cited by 254
Fan, Y., Yang, Z., Hua, W., Liu, D., Tao, T., Rahman, M. M., Lei, W., Huang, S., & Chen, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602380 · Cited by 253
Li2S6‐Integrated PEO‐Based Polymer Electrolytes for All‐Solid‐State Lithium‐Metal Batteries
Fang, R., Xu, B., Grundish, N. S., Xia, Y., Li, Y., Lu, C., Liu, Y., Wu, N., & Goodenough, J. B. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202106039 · Cited by 252
Highly concentrated electrolyte solutions for 4 V class potassium-ion batteries
Hosaka, T., Kubota, K., Kojima, H., & Komaba, S. (2018) · Chemical Communications · doi:10.1039/c8cc04433c · Cited by 250
A high performance lithium-ion sulfur battery based on a Li2S cathode using a dual-phase electrolyte
Wang, L., Wang, Y., & Xia, Y. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00058k · Cited by 247
Zhang, B., Sheng, T., Wang, Y., Chou, S., Davey, K., Dou, S., & Qiao, S. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201811080 · Cited by 246
Improved lithium–sulfur cells with a treated carbon paper interlayer
Zu, C., Su, Y.-S., Fu, Y., & Manthiram, A. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp43394j · Cited by 245
Mechanical Properties of a Battery Separator under Compression and Tension
Cannarella, J., Liu, X., Leng, C. Z., Sinko, P. D., Gor, G. Y., & Arnold, C. B. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0191411jes · Cited by 242
Reactivities and Conductivities of Ions and Ion Pairs in Polymerization Processes
Bhattacharyya, D., Lee, C. L., Šmı́d, J., & Szwarc, M. (1965) · The Journal of Physical Chemistry · doi:10.1021/j100886a043 · Cited by 241
Pressure-Driven Interface Evolution in Solid-State Lithium Metal Batteries
Zhang, X., Wang, Q. J., Harrison, K. L., Roberts, S. A., & Harris, S. J. (2020) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2019.100012 · Cited by 240
A Mixed Lithium‐Ion Conductive Li2S/Li2Se Protection Layer for Stable Lithium Metal Anode
Liu, F., Wang, L., Zhang, Z., Shi, P., Feng, Y., Yao, Y., Ye, S., Wang, H., Wu, X., & Yu, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001607 · Cited by 240
The role of mechanically induced separator creep in lithium-ion battery capacity fade
Peabody, C., & Arnold, C. B. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.05.023 · Cited by 237
Tutorial review on structure – dendrite growth relations in metal battery anode supports
Liu, W., Liu, P., & Mitlin, D. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00867b · Cited by 234
Self-citationWang, M. J., Kazyak, E., Dasgupta, N. P., et al. (2021) · Joule · doi:10.1016/j.joule.2021.04.001 · Cited by 234
Design Principles of Functional Polymer Separators for High‐Energy, Metal‐Based Batteries
Zhang, W., Tu, Z., Qian, J., Choudhury, S., Archer, L. A., & Lu, Y. (2018) · Small · doi:10.1002/smll.201703001 · Cited by 232
Wang, H., Wang, C., Matios, E., & Li, W. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b03071 · Cited by 230
Huo, H., Li, X., Chen, Y., Liang, J., Deng, S., Gao, X., Doyle-Davis, K., Li, R., Guo, X., Shen, Y., et al. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.12.022 · Cited by 230
Liu, Y., Xiong, S., Wang, J., Jiao, X., Li, S., Zhang, C., Song, Z., & Song, J. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.10.015 · Cited by 227
Yan, Z., Xiao, J., Lai, W., Wang, L., Gebert, F., Wang, Y., Gu, Q., Liu, H., Chou, S.-L., Liu, H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-11600-3 · Cited by 227
Life cycle assessment of lithium sulfur battery for electric vehicles
Deng, Y., Li, J., Li, T., Gao, X., & Yuan, C. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.036 · Cited by 226
Nonlithium Metal–Sulfur Batteries: Steps Toward a Leap
Hong, X., Mei, J., Wen, L., Tong, Y., Vasileff, A. J., Wang, L., Liang, J., Sun, Z., & Dou, S. X. (2019) · Advanced Materials · doi:10.1002/adma.201802822 · Cited by 224
Ju, Z., Nai, J., Wang, Y., Liu, T., Zheng, J., Yuan, H., Sheng, O., Jin, C., Zhang, W., Jin, Z., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-14358-1 · Cited by 224
Capacity Enhancement and Discharge Mechanisms of Room‐Temperature Sodium–Sulfur Batteries
Yu, X., & Manthiram, A. (2014) · ChemElectroChem · doi:10.1002/celc.201402112 · Cited by 221
Ding, J., Zhou, H., Zhang, H., Stephenson, T., Li, Z., Karpuzov, D., & Mitlin, D. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02274j · Cited by 220
Self-citationLiang, G., Wu, J., Qin, X., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07487 · Cited by 216
Mechanical properties and scaling laws of nanoporous gold
Sun, X., Xu, G., Li, X., Feng, X., & Gao, H. (2013) · Journal of Applied Physics · doi:10.1063/1.4774246 · Cited by 215
Room-Temperature Solid-State Sodium∕Sulfur Battery
Park, C.-W., Ahn, J.-H., Ryu, H.-S., Kim, K.-W., & Ahn, H.-J. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2164607 · Cited by 214
Wu, J., Zeng, H., Li, X., Xiao, X. H., Liao, Y., Xue, Z., Ye, Y., & Xie, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802430 · Cited by 213
Electron‐State Confinement of Polysulfides for Highly Stable Sodium–Sulfur Batteries
Ye, C., Jiao, Y., Chao, D., Ling, T., Shan, J., Zhang, B., Gu, Q., Davey, K. R., Wang, H., & Qiao, S. (2020) · Advanced Materials · doi:10.1002/adma.201907557 · Cited by 212
Wu, T., Jing, M., Yang, L., Zou, G., Hou, H., Zhang, Y., Zhang, Y., Cao, X., & Ji, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803478 · Cited by 210
Zhu, J., Ge, Y., Kim, D., Lu, Y., Chen, C., Jiang, M., & Zhang, X. (2016) · Nano Energy · doi:10.1016/j.nanoen.2015.12.022 · Cited by 209
A Nano‐shield Design for Separators to Resist Dendrite Formation in Lithium‐Metal Batteries
Liang, J., Chen, Q., Liao, X., Yao, P., Zhu, B., Lv, G., Wang, X., Chen, X., & Zhu, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201915440 · Cited by 209
Na Reactivity toward Carbonate-Based Electrolytes: The Effect of FEC as Additive
Dugas, R., Ponrouch, A., Gachot, G., David, R., Palacin, M. R., & Tarascon, J. M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0981610jes · Cited by 208
Xu, R.-C., Xia, X.-H., Wang, X.-L., Xia, Y., & Tu, J.-P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10142a · Cited by 207
Yu, X., & Manthiram, A. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04588 · Cited by 205
Wang, H., Wang, C., Matios, E., & Li, W. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201801818 · Cited by 205
Zhu, X., Jiang, X., Ai, X., Yang, H., & Cao, Y. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.12.059 · Cited by 203
Judez, X., Zhang, H., Li, C., González-Marcos, J. A., Zhou, Z., Armand, M., & Rodriguez-Martinez, L. M. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b00593 · Cited by 203
Arbi, K., Rojo, J. M., & Sanz, J. (2007) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2007.02.118 · Cited by 201
Suppressing Lithium Dendrite Growth by Metallic Coating on a Separator
Lee, H., Ren, X., Niu, C., Yu, L., Engelhard, M. H., Cho, I., Ryou, M., Jin, H. S., Kim, H., Liu, J., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201704391 · Cited by 200
Potassium–Sulfur Batteries: A New Member of Room-Temperature Rechargeable Metal–Sulfur Batteries
Zhao, Q., Hu, Y., Zhang, K., & Chen, J. (2014) · Inorganic Chemistry · doi:10.1021/ic500919e · Cited by 199
Yim, T., Han, S. H., Park, N. H., Park, M., Lee, J. H., Shin, J., Choi, J. W., Jung, Y., Jo, Y. N., Yu, J., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602498 · Cited by 197
Zhao, Y., Liu, M., Lv, W., He, Y.-B., Wang, C., Yun, Q., Li, B., Kang, F., & Yang, Q.-H. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.030 · Cited by 197
Nanocellulose Modified Polyethylene Separators for Lithium Metal Batteries
Pan, R., Xu, X., Sun, R., Wang, Z., Lindh, J., Edström, K., Strømme, M., & Nyholm, L. (2018) · Small · doi:10.1002/smll.201704371 · Cited by 195
Chang, C.-H., Chung, S.-H., & Manthiram, A. (2016) · Small · doi:10.1002/smll.201502505 · Cited by 194
Guo, D., Ming, F., Su, H., Wu, Y., Wahyudi, W., Li, M., Hedhili, M. N., Sheng, G., Li, L.-J., Alshareef, H. N., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.05.011 · Cited by 194
Li, Y., Wang, W., Liu, X., Mao, E., Wang, M., Li, G., Fu, L., Li, Z., Eng, A. Y. S., Seh, Z. W., et al. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.05.005 · Cited by 193
Cellulose-Based Porous Membrane for Suppressing Li Dendrite Formation in Lithium–Sulfur Battery
Yu, B.-C., Park, K., Jang, J.-H., & Goodenough, J. B. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00209 · Cited by 192
Cited by
Xiao, P., Yun, X., Chen, Y., Guo, X., Gao, P., Zhou, G., & Zheng, C. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00151b · Cited by 443
Gel polymer electrolytes for rechargeable batteries toward wide-temperature applications
Zhou, X., Zhou, Y., Yu, L., Qi, L., Oh, K.-S., Hu, P., Lee, S.-Y., & Chen, C. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00551h · Cited by 333
Yao, W., Xu, J., Ma, L., Lu, X., Luo, D., Qian, J., Zhan, L., Manke, I., Yang, C., Adelhelm, P., et al. (2023) · Advanced Materials · doi:10.1002/adma.202212116 · Cited by 317
Metadata
- Authors
- Hao, H., Hutter, T., Boyce, B. L., Watt, J., Liu, P., & Mitlin, D.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-03-29
- Volume
- 122
- Issue
- 9
- Pages
- 8053-8125
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W4220815223
- Cited by
- 314
- References
- 329
- FWCI
- 3.77
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.