The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index; 3 of the 22 sources its claims cite were checked for support.
The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor
Open accessAbstract
High Resolution Image Download MS PowerPoint Slide Lignin is a promising resource for the sustainable production of platform chemicals and biofuels. The paper industry produces large quantities of lignin every year, mostly dissolved in a black liquor. With the help of hydrothermal liquefaction, black liquor can be used directly as a feedstock to depolymerize the lignin to desired products. However, because various cooking chemicals (e.g., NaHS, NaOH) used in the Kraft process, dominant in the paper industry, are also dissolved in the black liquor, it is necessary to study in detail their influence on the process as well as their fate. In this work, the focus was on the fate of sulfur and the influence of sulfide (HS – ). For this purpose, hydrothermal liquefaction experiments (250–400 °C) were carried out with black liquor and self-prepared model black liquor with different sulfide concentrations (0–3 g·L –1 HS – ) in batch reactors ( V = 25 mL), and the products were analyzed to understand the chemical pathways involving sulfur. It was found that the inorganic sulfur compounds react with organic matter to produce organic sulfur compounds. Dimethyl sulfide is the most abundant of these products. The HS – concentration correlates with the amount of dimethyl sulfide produced. Because methanethiol has also been qualitatively detected, the reaction mechanism of Karnofski et al. for the formation of dimethyl sulfide in the Kraft process also applies to the hydrothermal liquefaction of black liquor. Increased sulfide concentration in the feed leads to an accelerated depolymerization of lignin. In contrast, the yields of some aromatic monomers decrease slightly, possibly as a result of repolymerization reactions also occurring more quickly.
Overview
CoChat Summary
TL;DR
Hydrothermal liquefaction of black liquor converts inorganic sulfide salts into organic sulfur compounds, with dimethyl sulfide (DMS) as the dominant product, and higher HS– concentrations accelerate lignin depolymerization. The study links sulfide concentration to DMS formation and supports the Karnofski mechanism for DMS formation under HTL conditions.
Key findings
- Inorganic sulfur reacts with organic matter to form organic sulfur compounds; DMS is the most abundant. DMS was detected in the gas phase with the highest yield over 25 mg·g–1 biomass in feedstock and in the liquid phase at concentrations up to 800 mg·L–1. HS– concentration correlates with DMS production, and methanethiol was qualitatively detected, supporting the Karnofski mechanism for DMS formation.
- The sulfur mass balance for TR = 300–400 °C and tR = 20 min recovered around 50 wt % of all sulfur. More than half of the inorganic sulfur in the liquid phase had already disappeared at TR = 300 °C, while solid-phase sulfur changed hardly at all and salt precipitation played only a minor role.
- Increased HS– concentration (0–3 g·L–1) accelerated lignin depolymerization: the SEC main peak shifted from about 6000 g·mol–1 to about 4000 g·mol–1 at 3 g·L–1 HS–, with formation of a compound of about 1500 g·mol–1, corresponding to approximately 10 aromatic rings. Catechol and methylated derivative yields were only minimally affected, with the largest decrease from 0 to 1 g·L–1 HS– and negligible change from 1 to 3 g·L–1.
- At 3 g·L–1 HS–, TR = 375 °C, and tR = 10 min, the DMS yield was approximately 12 mg·g–1, at the same level as real black liquor at TR = 375 °C and tR = 20 min.
Methods
- Batch HTL experiments were performed in 25 mL stainless steel micro autoclaves. Real black liquor came from a Portuguese eucalyptus pulp mill; model black liquors were prepared with extracted lignin and salts at 0, 1, 2, and 3 g·L–1 HS–. Real black liquor was tested at TR = 250–400 °C with tR = 20 min; model black liquor at TR = 375 °C and tR = 10 min. Pressure was set around 200–250 bar after an initial N2 pressure of 10 bar.
- Products were separated by gas sampling, vacuum filtration, drying of solids, and liquid–liquid extraction with ethyl acetate after acidification. Analyses included GC-SCD for liquid organosulfur compounds, GC-FID/TCD/MS for gas-phase DMS and H2S, ion chromatography for inorganic sulfur, elemental analysis for total sulfur, GC-MS/FID for aromatics, SEC for molecular weight, and EA/ICP-OES for solid residue.
- Experiments were repeated three times; most analyses were performed once per sample, with mean values and standard deviations calculated. SEC analysis and sodium/potassium balance used mixtures of the three samples.
Limitations
- Stated: the sulfur mass balance detected only around 50 wt % of sulfur; methanethiol and other gaseous sulfurous components could not be quantified; only part of H2S was quantified because post-reaction pH was 8.5–10 versus H2S pKa 7; volatile thiols and small sulfides can cause underestimation; possible sulfidation of reactor walls cannot be ruled out; SEC absolute molecular weights are difficult due to sample–column–solvent interactions and lack of standards; the large error bar at TR = 350 °C for DMS and DMTS could not be explained.
- Stated/evident: model black liquor differs from real black liquor in organic composition, such as absence of hemicellulose, though the authors state this can be neglected for the lignin-focused evaluation; SEC results for 1 and 2 g·L–1 HS– do not fit optimally into the series, and molecular weights are relative rather than absolute.
- Evident: most analyses were performed only once per sample, limiting uncertainty estimates, and the incomplete sulfur recovery constrains interpretation of the sulfur mass balance.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures













Verification
Claims the paper makes
1 Valid · 3 Not valid · 14 Not checked · 68 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The inorganic sulfur compounds are present as anions in the BL, mainly as bisulfide (HS–),36 sulfite (SO32–), sulfate (SO42–), and thiosulfate (S2O32–).”
§ The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor > Introduction
What the sources say
- Could not verifycites [36] sourceExperimental — accuracy not yet measured
The Abstract mentions an aqueous fraction containing inorganic salts, and the NMR Study of Extractable Organics reports elemental sulfur measurements. Neither identifies the inorganic sulfur anions in black liquor. Searches for bisulfide, sulfite, sulfate, and thiosulfate found no passage specifying those species. (LLM, conf=0.72)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“They describe how the HS– ions force the cleavage of β-O-4 bonds, which are the most common type of bond in the lignin structure.”
§ The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor > Results and Discussion > Influence of HS– Ions on the Depolymerization of Lignin
What the sources say
- Not matchedcites Gierer et al.
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
- Not checked — no full text of the sourcecites [40] source
- Not checked — no full text of the sourcecites [52] source
- Could not verifycites [53] sourceExperimental — accuracy not yet measured
The Introduction and section 3.2.1 discuss organosulphur compounds and C–S bond cleavage under hydrothermal conditions, not HS⁻-driven cleavage of lignin β-O-4 bonds. Searches for β-O-4 bonds and hydrosulfide-mediated lignin bond cleavage found no passage addressing the claim; no page numbers were available in our copy. (LLM, conf=0.76)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The main compounds produced are the same with the real BL and the MBL.”
§ The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor > Results and Discussion > Comparison of the Model Black Liquor with Real Black Liquor
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“For all the investigated samples from the HTL of BL, we were able to detect around 50 wt % of all sulfur in the system.”
§ The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor > Results and Discussion > Effect of Reaction Temperature TR on the Sulfur Mass Balance
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“It can be seen that the retention time of the peaks of the main components is the same for both analyzed samples.”
§ The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor > Results and Discussion > Comparison of the Model Black Liquor with Real Black Liquor
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
41 more claims
Create a free account to see all 86 claims and every source verdict.
- Probably not a substantial claim. 22
- It may state two separate claims as one. 21
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor > Results and Discussion > Comparison of the Model Black Liquor with Real Black Liquor
“Figure 10 shows the GC–MS spectra of the extracted organic phase after HTL of a model liquor and the real BL at TR = 375 °C and tR = 10 min.”
§ The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor > Materials and Methods > Batch Experiment Setup and Product Separation
“Reaction temperatures for HTL with real BL were set between TR = 250 and 400 °C with a holding time of tR = 20 min (overall t = tR + tpre). HTL with the MBL was carried out at TR = 375 °C and tR = 10 min.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor > Introduction
“In this study, reaction temperatures between TR = 300 and 400 °C are investigated in batch mode at pressures between pR = 200 and 300 bar.”
§ The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor > Materials and Methods > Batch Experiment Setup and Product Separation
“Reaction temperatures for HTL with real BL were set between TR = 250 and 400 °C with a holding time of tR = 20 min (overall t = tR + tpre).”
Citations
Cites
Lignin Valorization: Improving Lignin Processing in the Biorefinery
Ragauskas, A. J., Beckham, G. T., Biddy, M. J., Chandra, R., Chen, F., Davis, M. F., Davison, B. H., Dixon, R. A., Gilna, P., Keller, M., et al. (2014) · Science · doi:10.1126/science.1246843 · Cited by 4,125
The biorefinery concept: Using biomass instead of oil for producing energy and chemicals
Cherubini, F. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.01.015 · Cited by 2,229
Roles of Water for Chemical Reactions in High-Temperature Water
Akiya, N., & Savage, P. E. (2002) · Chemical Reviews · doi:10.1021/cr000668w · Cited by 1,581
Lignin Depolymerization and Conversion: A Review of Thermochemical Methods
Pandey, M. P., & Kim, C. S. (2011) · Chemical Engineering & Technology · doi:10.1002/ceat.201000270 · Cited by 1,419
Vanillin production from lignin and its use as a renewable chemical
Fache, M., Boutevin, B., & Caillol, S. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01344 · Cited by 902
Hydrothermal conversion of lignin: A review
Kang, S., Li, X., Fan, J., & Chang, J. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.07.013 · Cited by 552
Oxidative upgrade of lignin – Recent routes reviewed
Lange, H., Decina, S., & Crestini, C. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.03.002 · Cited by 473
Understanding the Fast Pyrolysis of Lignin
Patwardhan, P. R., Brown, R. C., & Shanks, B. H. (2011) · ChemSusChem · doi:10.1002/cssc.201100133 · Cited by 468
Chemical aspects of kraft pulping
Gierer, J. (1980) · Wood Science and Technology · doi:10.1007/bf00383453 · Cited by 455
Integrated lignocellulosic value chains in a growing bioeconomy: Status quo and perspectives
Dahmen, N., Lewandowski, I., Zibek, S., & Weidtmann, A. (2019) · GCB Bioenergy · doi:10.1111/gcbb.12586 · Cited by 444
Self-citation
Research works printed but not linked: 7
- Energy Institute. Statistical Review of World Energy 2023 - 72th edition. https://www.energyinst.org/statistical-review/resources-and-data-downloads.
- Bresinsky A., 2008, Strasburger - Lehrbuch der Botanik
- Metsä Group. Metsä Group. Sustainability Report 2018 . https://www.metsagroup.com/news-and-publications/news/2019/metsa-groups-2018-annual-review-sustainability-report-and-brochure-published/ 2019.
- Schmiedl D., 2015, NWBC 2015: The 6th Nordig Wood Biorefinery Conference: Helsinki, Finland, 20–22 October, 2015, 233
- Canabarro N. I., J. Supercrit. Fluids
- Cheremisinoff N. P., 2010, Best practices in the wood and paper industries, 2
- Tomani P., 2010, Cellul. Chem. Technol., 44, 53
Cited by
Rojas, M., Manrique, R., Hornung, U., Funke, A., Mullen, C. A., Chejne, F., & Maya, J. C. (2025) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2025.107621 · Cited by 67
Self-citationJain, S., & Kumar, S. (2024) · Sustainable Chemistry for Climate Action · doi:10.1016/j.scca.2024.100053 · Cited by 79
Ren, Y., Yin, J., Hu, H., Dong, L., Huang, Y., Liu, H., Li, X., & Yao, H. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.159615 · Cited by 16
Metadata
- Authors
- Wörner, M., Werner, L., Hornung, U., Islongo Canabarro, N., Baudouin, D., & Dahmen, N.
- Affiliations
- Karlsruhe Institute of Technology (DE)
- Bioenergy and Catalysis Laboratory (LBK), Paul-Scherrer-Institute (PSI), Forschungsstrasse 111, Villigen 5232, Switzerland
- Paul Scherrer Institute (CH)
- Corresponding author
- Wörner, Maximilian
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2024-03-19
- Volume
- 38
- Issue
- 7
- Pages
- 6036-6047
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- PMC
- PMC11000222
- OpenAlex
- W4392957056
- Semantic Scholar
- ce17747be3dee2cf01a32f16f0d8ac190246492d
- Cited by
- 21
- References
- 49
- Citations by year
- 2026: 10 · 2025: 9 · 2024: 2
- FWCI
- 2.30
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Energy & Fuels (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Repository KITopen (Karlsruhe Institute of Technology) (submittedVersion, cc-by)
- DORA PSI (Paul Scherrer Institute) (submittedVersion, cc-by)
- KITopen (cc-by)
- Funders
- Horizon 2020 Framework Programme (884111)
- Topics
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
- Keywords
- lignin depolymerization, hydrothermal liquefaction, black liquor, sulfide, dimethyl sulfide, methanethiol, organosulfur compounds, repolymerization, aromatic monomers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor. https://app.cochat.ai/papers/10.1021/acs.energyfuels.3c04737
- The paper
- Wörner, M., Werner, L., Hornung, U., Islongo Canabarro, N., Baudouin, D., & Dahmen, N. (2024). The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor. Energy & Fuels. https://doi.org/10.1021/acs.energyfuels.3c04737
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.