The DOI matches its Crossref record; 79 of the 79 references it cites were found in a registry or an index.
Review and Perspectives of Data-Driven Distributed Monitoring for Industrial Plant-Wide Processes
Abstract
Process monitoring is crucial for maintaining favorable operating conditions and has received considerable attention in previous decades. Currently, a plant-wide process generally consists of multiple operational units and a large number of measured variables. The correlation among the variables and units is complex and results in the imperative but challenging monitoring of such plant-wide processes. With the rapid advancement of industrial sensing techniques, process data with meaningful process information are collected. Data-driven multivariate statistical plant-wide process monitoring (DMSPPM) has become popular. The key idea of DMSPPM is first decomposing a plant-wide process into multiple subprocesses and then establishing a data-driven model for monitoring the process, in which process variable decomposition is important for guaranteeing the monitoring performance. In the current review, we first introduce the basics of multivariate statistical process monitoring and highlight the necessity of designing a distributed monitoring scheme. Then state-of-the-art DMSPPM methods are revisited. Finally, opportunities of and challenges to the DMSPPM methods are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Regression shrinkage and selection via the lasso
Tibshirani, R. (1996) · Journal of the Royal Statistical Society Series B: Statistical Methodology · doi:10.1111/j.2517-6161.1996.tb02080.x · Cited by 51,482
Herne, H., Cooley, W. W., & Lohnes, P. R. (1973) · Journal of the Royal Statistical Society. Series A (General) · doi:10.2307/2344428 · Cited by 35,697
A Mathematical Theory of Evidence
Shafer, G. (2020) · Princeton University Press eBooks · doi:10.2307/j.ctv10vm1qb · Cited by 11,711
A Mathematical Theory of Evidence
Shafer, G. (1976) · Princeton University Press eBooks · doi:10.1515/9780691214696 · Cited by 9,083
Introduction to Statistical Quality Control
Sauter, R. M., & Montgomery, D. C. (1992) · Technometrics · doi:10.2307/1269251 · Cited by 7,842
Detection of Abrupt Changes: Theory and Application
Riedel, K. S. (1994) · Technometrics · doi:10.1080/00401706.1994.10485821 · Cited by 3,518
A plant-wide industrial process control problem
Downs, J. J., & Vogel, E. F. (1993) · Computers & Chemical Engineering · doi:10.1016/0098-1354(93)80018-i · Cited by 3,348
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
A review of process fault detection and diagnosis
Venkatasubramanian, V., Rengaswamy, R., Yin, K., & Kavuri, S. N. (2003) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00160-6 · Cited by 2,723
Applied Multivariate Statistical Analysis
Härdle, W., & Simar, L. (2003) · Springer eBooks · doi:10.1007/978-3-662-05802-2 · Cited by 2,263
A Generalization of Bayesian Inference
Dempster, A. P. (1968) · Journal of the Royal Statistical Society Series B: Statistical Methodology · doi:10.1111/j.2517-6161.1968.tb00722.x · Cited by 2,013
A review of process fault detection and diagnosis
Venkatasubramanian, V., Rengaswamy, R., Kavuri, S. N., & Yin, K. (2003) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00162-x · Cited by 1,859
A Review on Basic Data-Driven Approaches for Industrial Process Monitoring
Yin, S., Ding, S. X., Xie, X., & Luo, H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301773 · Cited by 1,716
A Generalization of Bayesian Inference
Dempster, A. P. (2008) · Studies in Fuzziness and Soft Computing · doi:10.1007/978-3-540-44792-4_4 · Cited by 1,702
A review of variable selection methods in Partial Least Squares Regression
Mehmood, T., Liland, K. H., Snipen, L., & Sæbø, S. (2012) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2012.07.010 · Cited by 1,591
Statistical process monitoring: basics and beyond
Joe Qin, S. (2003) · Journal of Chemometrics · doi:10.1002/cem.800 · Cited by 1,582
Disturbance detection and isolation by dynamic principal component analysis
Ku, W., Storer, R. H., & Georgakis, C. (1995) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/0169-7439(95)00076-3 · Cited by 1,483
Survey on data-driven industrial process monitoring and diagnosis
Qin, S. J. (2012) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2012.09.004 · Cited by 1,470
Statistical process control of multivariate processes
MacGregor, J. F., & Kourti, T. (1995) · Control Engineering Practice · doi:10.1016/0967-0661(95)00014-l · Cited by 1,270
Nonlinear process monitoring using kernel principal component analysis
Lee, J.-M., Yoo, C., Choi, S. W., Vanrolleghem, P. A., & Lee, I.-B. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2003.09.012 · Cited by 1,086
Sparse Partial Least Squares Regression for Simultaneous Dimension Reduction and Variable Selection
Chun, H., & Keleş, S. (2010) · Journal of the Royal Statistical Society Series B: Statistical Methodology · doi:10.1111/j.1467-9868.2009.00723.x · Cited by 908
Techniques of Statistical Analysis.
Olds, E. G., Group, S. R., Eisenhart, C., Hastay, M. W., & Wallis, W. A. (1950) · The American Mathematical Monthly · doi:10.2307/2308320 · Cited by 829
Gao, Z., Cecati, C., & Ding, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2419013 · Cited by 776
Process monitoring and diagnosis by multiblock PLS methods
MacGregor, J. F., Jaeckle, C., Kiparissides, C., & Koutoudi, M. (1994) · AIChE Journal · doi:10.1002/aic.690400509 · Cited by 773
Statistical process monitoring with independent component analysis
Lee, J.-M., Yoo, C., & Lee, I.-B. (2004) · Journal of Process Control · doi:10.1016/j.jprocont.2003.09.004 · Cited by 746
Analysis of multiblock and hierarchical PCA and PLS models
Westerhuis, J. A., Kourti, T., & MacGregor, J. F. (1998) · Journal of Chemometrics · doi:10.1002/(sici)1099-128x(199809/10)12:5<301::aid-cem515>3.0.co;2-s · Cited by 735
Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems
Ding, S. X. (2014) · Advances in Industrial Control · doi:10.1007/978-1-4471-6410-4 · Cited by 669
Chiang, L. H., Russell, E. L., & Braatz, R. D. (2000) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/s0169-7439(99)00061-1 · Cited by 630
Review on data-driven modeling and monitoring for plant-wide industrial processes
Ge, Z. (2017) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2017.09.021 · Cited by 630
New Light on the Correlation Coefficient and its Transforms
Hotelling, H. (1953) · Journal of the Royal Statistical Society Series B: Statistical Methodology · doi:10.1111/j.2517-6161.1953.tb00135.x · Cited by 544
Total projection to latent structures for process monitoring
Zhou, D., Li, G., & Qin, S. J. (2010) · AIChE Journal · doi:10.1002/aic.11977 · Cited by 472
On-line batch process monitoring using dynamic PCA and dynamic PLS models
Chen, J., & Liu, K.-C. (2002) · Chemical Engineering Science · doi:10.1016/s0009-2509(01)00366-9 · Cited by 431
Monitoring independent components for fault detection
Kano, M., Tanaka, S., Hasebe, S., Hashimoto, I., & Ohno, H. (2003) · AIChE Journal · doi:10.1002/aic.690490414 · Cited by 410
Tidriri, K., Chatti, N., Verron, S., & Tiplica, T. (2016) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2016.09.008 · Cited by 397
Process data analytics in the era of big data
Qin, S. J. (2014) · AIChE Journal · doi:10.1002/aic.14523 · Cited by 383
Geometric properties of partial least squares for process monitoring
Li, G., Qin, S. J., & Zhou, D. (2010) · Automatica · doi:10.1016/j.automatica.2009.10.030 · Cited by 368
Jiang, Q., Yan, X., & Huang, B. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2466557 · Cited by 361
Self-citationJoint Blind Source Separation by Multiset Canonical Correlation Analysis
Li, Y.-O., Adali, T., Wang, W., & Calhoun, V. D. (2009) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2009.2021636 · Cited by 337
Shang, C., Yang, F., Gao, X., Huang, X., Suykens, J. A. K., & Huang, D. (2015) · AIChE Journal · doi:10.1002/aic.14888 · Cited by 300
Zhu, J., Ge, Z., & Song, Z. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2658732 · Cited by 289
Decentralized Fault Diagnosis of Large-Scale Processes Using Multiblock Kernel Partial Least Squares
Zhang, Y., Zhou, H., Qin, S. J., & Chai, T. (2010) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2009.2033181 · Cited by 283
Qin, S. J., & Zheng, Y. (2013) · AIChE Journal · doi:10.1002/aic.13959 · Cited by 263
Nonlinear Process Fault Diagnosis Based on Serial Principal Component Analysis
Deng, X., Tian, X., Chen, S., & Harris, C. J. (2018) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2016.2635111 · Cited by 213
Zhao, C., & Sun, H. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2864703 · Cited by 171
Dynamic PLS modelling for process control
Kaspar, M. H., & Harmon Ray, W. (1993) · Chemical Engineering Science · doi:10.1016/0009-2509(93)85001-6 · Cited by 165
Local and global principal component analysis for process monitoring
Yu, J. (2012) · Journal of Process Control · doi:10.1016/j.jprocont.2012.06.008 · Cited by 163
Bearing Fault Diagnosis Based on Statistical Locally Linear Embedding
Wang, X., Zheng, Y. G., Zhao, Z., & Wang, J. (2015) · Sensors · doi:10.3390/s150716225 · Cited by 159
Plant-Wide Industrial Process Monitoring: A Distributed Modeling Framework
Ge, Z., & Chen, J. (2015) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2015.2509247 · Cited by 153
Liu, Y., Liu, B., Zhao, X., & Xie, M. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2786253 · Cited by 141
Diagnosis of plant-wide oscillation through data-driven analysis and process understanding
Thornhill, N. F., Cox, J. W., & Paulonis, M. A. (2003) · Control Engineering Practice · doi:10.1016/s0967-0661(03)00108-4 · Cited by 137
Jiang, Q., Yan, X., Yi, H., & Gao, F. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2922941 · Cited by 134
Self-citationBatch process monitoring based on support vector data description method
Ge, Z., Gao, F., & Song, Z. (2011) · Journal of Process Control · doi:10.1016/j.jprocont.2011.02.004 · Cited by 130
Deng, X., Tian, X., Chen, S., & Harris, C. J. (2018) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2018.2865413 · Cited by 128
Localized Fisher discriminant analysis based complex chemical process monitoring
Yu, J. (2010) · AIChE Journal · doi:10.1002/aic.12392 · Cited by 117
Development of soft-sensor using locally weighted PLS with adaptive similarity measure
Kim, S., Okajima, R., Kano, M., & Hasebe, S. (2013) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2013.03.008 · Cited by 101
Decentralized Fault Diagnosis of Continuous Annealing Processes Based on Multilevel PCA
Liu, Q., Qin, S. J., & Chai, T. (2013) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2012.2230628 · Cited by 100
GMM and optimal principal components-based Bayesian method for multimode fault diagnosis
Jiang, Q., Huang, B., & Yan, X. (2015) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2015.09.013 · Cited by 100
Self-citationZhu, J., Ge, Z., Song, Z., Zhou, L., & Chen, G. (2017) · Journal of Process Control · doi:10.1016/j.jprocont.2017.08.011 · Cited by 93
Ge, Z. (2017) · Journal of Process Control · doi:10.1016/j.jprocont.2017.08.010 · Cited by 87
Quality Relevant and Independent Two Block Monitoring Based on Mutual Information and KPCA
Huang, J., & Yan, X. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2682012 · Cited by 86
Self-citationGrbovic, M., Li, W., Xu, P., Usadi, A. K., Song, L., & Vučetić, S. (2012) · Journal of Process Control · doi:10.1016/j.jprocont.2012.02.003 · Cited by 82
Dynamic-Inner Partial Least Squares for Dynamic Data Modeling
Dong, Y., & Qin, S. J. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.08.167 · Cited by 79
Zhu, J., Ge, Z., & Song, Z. (2014) · AIChE Journal · doi:10.1002/aic.14419 · Cited by 75
Ghosh, K., Ng, Y. S., & Srinivasan, R. (2010) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2010.05.004 · Cited by 70
Liu, Q., Zhu, Q., Qin, S. J., & Chai, T. (2017) · Journal of Process Control · doi:10.1016/j.jprocont.2016.11.009 · Cited by 69
Tong, C., & Shi, X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2530047 · Cited by 59
Multiblock PLS analysis of an industrial pharmaceutical process
Lopes, J. A., de Menezes, J. C., Westerhuis, J. A., et al. (2002) · Biotechnology and Bioengineering · doi:10.1002/bit.10382 · Cited by 57
Jiang, Q., Huang, B., Ding, S. X., & Yan, X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2577545 · Cited by 55
Self-citationDistributed plant-wide process monitoring based on PCA with minimal redundancy maximal relevance
Xu, C., Zhao, S., & Liu, F. (2017) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2017.08.004 · Cited by 55
Jiang, Q., Gao, F., Yan, X., et al. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2860571 · Cited by 53
Self-citationStatistical process monitoring based on a multi-manifold projection algorithm
Tong, C., & Yan, X. (2013) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2013.09.006 · Cited by 45
Self-citationProcess Fault Detection Using Directional Kernel Partial Least Squares
Zhang, Y., Du, W., Fan, Y., & Zhang, L. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/ie501502t · Cited by 40
Monitoring for Nonlinear Multiple Modes Process Based on LL-SVDD-MRDA
Du, W., Tian, Y., & Qian, F. (2014) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2013.2285571 · Cited by 38
Ge, Z. (2014) · Control Engineering Practice · doi:10.1016/j.conengprac.2014.06.006 · Cited by 36
Zhong, W., Jiang, C., Peng, X., Li, Z., & Qian, F. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b01270 · Cited by 35
Probabilistic Weighted NPE-SVDD for chemical process monitoring
Jiang, Q., & Yan, X. (2014) · Control Engineering Practice · doi:10.1016/j.conengprac.2014.03.008 · Cited by 28
Self-citationLi, W., Zhao, C., & Huang, B. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b02683 · Cited by 21
Self-citationJiang, Q., Wang, Y., & Yan, X. (2017) · IEEE Access · doi:10.1109/access.2017.2787620 · Cited by 12
Self-citationJoint-Individual Monitoring of Parallel-Running Batch Processes Based on MCCA
Wang, Y., Jiang, Q., Li, B., & Cui, L. (2017) · IEEE Access · doi:10.1109/access.2017.2784097 · Cited by 10
Self-citation
Metadata
- Authors
- Jiang, Q., Yan, X., & Huang, B.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-07-08
- Volume
- 58
- Issue
- 29
- Pages
- 12899-12912
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2959724594
- Cited by
- 297
- References
- 79
- FWCI
- 24.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.