CoChat

An Ionophore for High Lithium Loading and Selective Capture from Brine

The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.

Abstract

The continuous demand and uneven dispersal of natural mineral resources of lithium with a low recycling rate of lithium commodities have forced researchers to look for alternative resources like geothermal brine, brackish brines, and sea brines. But selective lithium-ion extraction and even lithium-ion binding from these aqueous systems is a recognized challenge due to very high hydration energy and the coexistence of other like metal ions but appealing due to economic benefits. Therefore, the designed synthesis of synthetic ionophores with high lithium selectivity is crucial as they can work on dilute conditions without removal of interfering metal ions. However, most of the lithium selective ionophores known in the literature are mononucleated, and no emphasis is given on designing multinucleating ionophore systems to improve the lithium loading capacity which will open up unexplored paths toward the development of a more sustainable and economical extraction process. Herein, we describe a rare fluorogenic macrocyclic ionophore with two binding pockets for selective lithium recognition and extraction among various major alkali and alkaline earth metal ions of oceanic presence through both solid-state and solution studies. Under solid-liquid extraction conditions, this receptor shows a high lithium loading capacity of 135% with LiClO 4 and 69.16% with LiCl salt with exclusive selectivity. Under liquid-liquid extraction conditions, this ionophore shows a loading capacity of 27% with 1 M LiCl and 48.57% with 1 M LiClO 4 source phase concentration. This new ionophore, therefore, inspiring further to modify and develop a better multinucleating extractant with high lithium loading capacity which is rare in the literature.

Overview

Integrity signals

Registry

Crossref · 10.1021/acs.inorgchem.9b00135

Cites

50 of 50 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 50 references

Research works printed but not linked: 3

  1. 10.1021/acs.est.5b00032 · DOI · Paper page
  2. 10.1021/ja003472m · DOI · Paper page
  3. 10.1002/(SICI)1521-3773(19990517)38:10<1409::AID-ANIE1409>3.0.CO;2-U · doi:10.1002/(sici)1521-3773(19990517)38:10<1409::aid-anie1409>3.0.co;2-u

Cited by

See all 39

Metadata

Authors
Gohil, H., Chatterjee, S., Yadav, S., Suresh, E., & Paital, A. R.
Affiliations
Central Salt and Marine Chemicals Research Institute (IN)
Corresponding author
Paital, Alok Ranjan
Venue
Inorganic Chemistry
Published
2019-05-15
Volume
58
Issue
11
Pages
7209-7219
ISSN
  • 0020-1669 (ISSN-L)
  • 1520-510X
OpenAlex
W2945292135
Cited by
39
References
50
Citations by year
2026: 4 · 2025: 8 · 2024: 10 · 2023: 7 · 2022: 1 · 2021: 6 · 2020: 1 · 2019: 2
FWCI
0.98
Type
journal article
Language
en
Open access
closed
Locations
  • Inorganic Chemistry (publishedVersion)
  • PubMed (publishedVersion)
Funders
  • Council of Scientific and Industrial Research (158/2018)
  • Department of Science and Technology, Ministry of Science and Technology (EMR/2016/002135, SB/S1/IC-12/2013)
Topics
  • Physical Sciences › Chemistry › Organic Chemistry › Supramolecular Chemistry and Complexes
  • Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
  • Physical Sciences › Chemistry › Spectroscopy › Molecular Sensors and Ion Detection
Keywords
selective lithium extraction, geothermal brine, solid-liquid extraction, liquid-liquid extraction, lithium perchlorate, lithium chloride

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: An Ionophore for High Lithium Loading and Selective Capture from Brine. https://app.cochat.ai/papers/10.1021/acs.inorgchem.9b00135
The paper
Gohil, H., Chatterjee, S., Yadav, S., Suresh, E., & Paital, A. R. (2019). An Ionophore for High Lithium Loading and Selective Capture from Brine. Inorganic Chemistry. https://doi.org/10.1021/acs.inorgchem.9b00135

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.