The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
4D-Printed Dynamic Materials in Biomedical Applications: Chemistry, Challenges, and Their Future Perspectives in the Clinical Sector
Open accessAbstract
Most of the biomedical materials printed using 3D bioprinting are static and are unable to alter/transform with dynamic changes in the internal environment of the body. The emergence of four-dimensional (4D) printing addresses this problem. By preprogramming dynamic polymer materials and their nanocomposites, 4D printing is able to produce the desired shapes or transform functions under specific conditions or stimuli to better adapt to the surrounding environment. In this review, the current and potential applications of 4D-printed materials are introduced in different aspects of the biomedical field, e.g., tissue engineering, drug delivery, and sensors. In addition, the existing limitations and possible solutions are discussed. Finally, the current limitations of 4D-printed materials along with their future perspective are presented to provide a basis for future research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Roger, V. L. (2013) · Circulation Research · doi:10.1161/circresaha.113.300268 · Cited by 1,728
Roles of vascular oxidative stress and nitric oxide in the pathogenesis of atherosclerosis
Förstermann, U., Xia, N., & Li, H. (2017) · Circulation Research · doi:10.1161/circresaha.116.309326 · Cited by 1,519
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
Yeh, H.-C., Brown, T. T., Maruthur, N., Ranasinghe, P., Berger, Z., Suh, Y. D., Wilson, L. M., Haberl, E. B., Brick, J., Bass, E. B., et al. (2012) · Annals of Internal Medicine · doi:10.7326/0003-4819-157-5-201209040-00508 · Cited by 493
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
pH-induced shape-memory polymers
Han, X., Dong, Z., Fan, M., Liu, Y., li, J., Wang, Y., Yuan, Q., Li, B., & Zhang, S. (2012) · Macromolecular Rapid Communications · doi:10.1002/marc.201200153 · Cited by 304
From 3D to 4D printing: Approaches and typical applications
Zhou, Y., Huang, W. M., Kang, S. F., Wu, X. L., Lu, H. B., Fu, J., & Cui, H. (2015) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-015-0925-0 · Cited by 224
Ansell, D. M., Kloepper, J. E., Thomason, H. A., Paus, R., & Hardman, M. J. (2011) · Journal of Investigative Dermatology · doi:10.1038/jid.2010.291 · Cited by 171
Cited by
Carboxymethyl cellulose-based materials for infection control and wound healing: A review
Kanikireddy, V., Varaprasad, K., Jayaramudu, T., Karthikeyan, C., & Sadiku, R. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.160 · Cited by 455
Khorsandi, D., Fahimipour, A., Abasian, P., Saber, S. S., Seyedi, M., Ghanavati, S., Ahmad, A., De Stephanis, A. A., Taghavinezhaddilami, F., Leonova, A., et al. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.12.044 · Cited by 428
Self-citationFabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Antimicrobial Ionic Liquid‐Based Materials for Biomedical Applications
Nikfarjam, N., Ghomi, M., Agarwal, T., Hassanpour, M., Sharifi, E., Khorsandi, D., Ali Khan, M., Rossi, F., Rossetti, A., Nazarzadeh Zare, E., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104148 · Cited by 293
Self-citationStimuli-responsive transdermal microneedle patches
Makvandi, P., Jamaledin, R., Chen, G., Baghbantaraghdari, Z., Zare, E. N., Di Natale, C., Onesto, V., Vecchione, R., Lee, J., Tay, F. R., et al. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.012 · Cited by 283
Self-citation
Metadata
- Authors
- Zhou, W., Qiao, Z., Nazarzadeh Zare, E., Huang, J., Zheng, X., Sun, X., Shao, M., Wang, H., Wang, X., Chen, D., Zheng, J., Fang, S., Li, Y. M., Zhang, X., Yang, L., Makvandi, P., & Wu, A.
- Venue
- Journal of Medicinal Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-04-07
- Volume
- 63
- Issue
- 15
- Pages
- 8003-8024
- ISSN
- 0022-2623 (ISSN-L)
- 1520-4804
- OpenAlex
- W3015165250
- Cited by
- 209
- References
- 14
- FWCI
- 12.61
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 4D-Printed Dynamic Materials in Biomedical Applications: Chemistry, Challenges, and Their Future Perspectives in the Clinical Sector. https://app.cochat.ai/papers/10.1021/acs.jmedchem.9b02115
- The paper
- Zhou, W., Qiao, Z., Nazarzadeh Zare, E., Huang, J., Zheng, X., Sun, X., Shao, M., Wang, H., Wang, X., Chen, D., Zheng, J., Fang, S., Li, Y. M., Zhang, X., Yang, L., Makvandi, P., & Wu, A. (2020). 4D-Printed Dynamic Materials in Biomedical Applications: Chemistry, Challenges, and Their Future Perspectives in the Clinical Sector. Journal of Medicinal Chemistry. https://doi.org/10.1021/acs.jmedchem.9b02115
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.