The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Bright Visible-Infrared Light Emitting Diodes Based on Hybrid Halide Perovskite with Spiro-OMeTAD as a Hole-Injecting Layer
Abstract
Hybrid halide perovskites that are currently intensively studied for photovoltaic applications, also present outstanding properties for light emission. Here, we report on the preparation of bright solid state light emitting diodes (LEDs) based on a solution-processed hybrid lead halide perovskite (Pe). In particular, we have utilized the perovskite generally described with the formula CH3NH3PbI(3-x)Cl(x) and exploited a configuration without electron or hole blocking layer in addition to the injecting layers. Compact TiO2 and Spiro-OMeTAD were used as electron and hole injecting layers, respectively. We have demonstrated a bright combined visible-infrared radiance of 7.1 W·sr(-1)·m(-2) at a current density of 232 mA·cm(-2), and a maximum external quantum efficiency (EQE) of 0.48%. The devices prepared surpass the EQE values achieved in previous reports, considering devices with just an injecting layer without any additional blocking layer. Significantly, the maximum EQE value of our devices is obtained at applied voltages as low as 2 V, with a turn-on voltage as low as the Pe band gap (V(turn-on) = 1.45 ± 0.06 V). This outstanding performance, despite the simplicity of the approach, highlights the enormous potentiality of Pe-LEDs. In addition, we present a stability study of unsealed Pe-LEDs, which demonstrates a dramatic influence of the measurement atmosphere on the performance of the devices. The decrease of the electroluminescence (EL) under continuous operation can be attributed to an increase of the non-radiative recombination pathways, rather than a degradation of the perovskite material itself.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Deschler, F., Price, M., Pathak, S., Klintberg, L. E., Jarausch, D.-D., Higler, R., Hüttner, S., Leijtens, T., Stranks, S. D., Snaith, H. J., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5005285 · Cited by 1,753
Cited by
Efficient luminescent solar cells based on tailored mixed-cation perovskites
Bi, D., Tress, W., Dar, M. I., Gao, P., Luo, J., Renevier, C., Schenk, K., Abate, A., Giordano, F., Correa Baena, J.-P., et al. (2016) · Science Advances · doi:10.1126/sciadv.1501170 · Cited by 1,864
Sutherland, B. R., & Sargent, E. H. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.62 · Cited by 1,730
Perovskite Materials for Light‐Emitting Diodes and Lasers
Veldhuis, S. A., Boix, P. P., Yantara, N., Li, M., Sum, T. C., Mathews, N., & Mhaisalkar, S. G. (2016) · Advanced Materials · doi:10.1002/adma.201600669 · Cited by 1,465
Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells
Domanski, K., Correa-Baena, J.-P., Mine, N., Nazeeruddin, M. K., Abate, A., Saliba, M., Tress, W., Hagfeldt, A., & Grätzel, M. (2016) · ACS Nano · doi:10.1021/acsnano.6b02613 · Cited by 1,245
Ultra-bright and highly efficient inorganic based perovskite light-emitting diodes
Zhang, L., Yang, X., Jiang, Q., Wang, P., Yin, Z., Zhang, X., Tan, H., Yang, Y., Wei, M., Sutherland, B. R., et al. (2017) · Nature Communications · doi:10.1038/ncomms15640 · Cited by 857
Essentially Trap-Free CsPbBr3 Colloidal Nanocrystals by Postsynthetic Thiocyanate Surface Treatment
Koscher, B. A., Swabeck, J. K., Bronstein, N. D., & Alivisatos, A. P. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b02817 · Cited by 844
CH3NH3PbCl3 Single Crystals: Inverse Temperature Crystallization and Visible-Blind UV-Photodetector
Maculan, G., Sheikh, A. D., Abdelhady, A. L., Saidaminov, M. I., Haque, M. A., Murali, B., Alarousu, E., Mohammed, O. F., Wu, T., & Bakr, O. M. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01666 · Cited by 791
Lessons learned from spiro-OMeTAD and PTAA in perovskite solar cells
Rombach, F. M., Haque, S. A., & Macdonald, T. J. (2021) · Energy & Environmental Science · doi:10.1039/d1ee02095a · Cited by 730
Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity
Tai, Q., You, P., Sang, H., Liu, Z., Hu, C., Chan, H. L. W., & Yan, F. (2016) · Nature Communications · doi:10.1038/ncomms11105 · Cited by 590
Inorganic Halide Perovskites for Efficient Light-Emitting Diodes
Yantara, N., Bhaumik, S., Yan, F., Sabba, D., Dewi, H. A., Mathews, N., Boix, P. P., Demir, H. V., & Mhaisalkar, S. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02011 · Cited by 552
Protesescu, L., Yakunin, S., Kumar, S., Bär, J., Bertolotti, F., Masciocchi, N., Guagliardi, A., Grotevent, M., Shorubalko, I., Bodnarchuk, M. I., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b00116 · Cited by 534
Bright Light‐Emitting Diodes Based on Organometal Halide Perovskite Nanoplatelets
Ling, Y., Yuan, Z., Tian, Y., Wang, X., Wang, J. C., Xin, Y., Hanson, K., Ma, B., & Gao, H. (2016) · Advanced Materials · doi:10.1002/adma.201503954 · Cited by 513
Halide Perovskites: Poor Man's High‐Performance Semiconductors
Stoumpos, C. C., & Kanatzidis, M. G. (2016) · Advanced Materials · doi:10.1002/adma.201600265 · Cited by 460
Advances in the Application of Perovskite Materials
Zhang, L., Mei, L., Wang, K., Lv, Y., Zhang, S., Lian, Y., Liu, X., Ma, Z., Xiao, G., Liu, Q., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01140-3 · Cited by 460
Hawash, Z., Ono, L. K., & Qi, Y. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201700623 · Cited by 455
Shi, Z., Li, Y., Zhang, Y., Chen, Y., Li, X., Wu, D., Xu, T., Shan, C., & Du, G. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04116 · Cited by 445
Metal Halide Perovskite Light‐Emitting Devices: Promising Technology for Next‐Generation Displays
Lu, M., Zhang, Y., Wang, S., Guo, J., Yu, W. W., & Rogach, A. L. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902008 · Cited by 425
High-Efficiency Light-Emitting Diodes of Organometal Halide Perovskite Amorphous Nanoparticles
Xing, J., Yan, F., Zhao, Y., Chen, S., Yu, H., Zhang, Q., Zeng, R., Demir, H. V., Sun, X., Huan, A., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b01540 · Cited by 401
Shi, Z., Li, S., Li, Y., Ji, H., Li, X., Wu, D., Xu, T., Chen, Y., Tian, Y., Zhang, Y., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07856 · Cited by 387
Ling, Y., Tian, Y., Wang, X., Wang, J. C., Knox, J. M., Perez‐Orive, F., Du, Y., Tan, L., Hanson, K., Ma, B., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602513 · Cited by 375
Wei, S., Yang, Y., Kang, X., Wang, L., Huang, L., & Pan, D. (2016) · Chemical Communications · doi:10.1039/c6cc01500j · Cited by 368
Synthesis, properties, and optical applications of low-dimensional perovskites
Zhang, Y., Liu, J., Wang, Z., Xue, Y., Ou, Q., Polavarapu, L., Zheng, J., Qi, X., & Bao, Q. (2016) · Chemical Communications · doi:10.1039/c6cc06425f · Cited by 303
Coherent Nanotwins and Dynamic Disorder in Cesium Lead Halide Perovskite Nanocrystals
Bertolotti, F., Protesescu, L., Kovalenko, M. V., Yakunin, S., Cervellino, A., Billinge, S. J. L., Terban, M. W., Pedersen, J. S., Masciocchi, N., & Guagliardi, A. (2017) · ACS Nano · doi:10.1021/acsnano.7b00017 · Cited by 302
Broadly tunable metal halide perovskites for solid-state light-emission applications
Adjokatse, S., Fang, H.-H., & Loi, M. A. (2017) · Materials Today · doi:10.1016/j.mattod.2017.03.021 · Cited by 286
Chen, Z., Zhang, C., Jiang, X., Liu, M., Xia, R., Shi, T., Chen, D., Xue, Q., Zhao, Y., Su, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201603157 · Cited by 279
Vybornyi, O., Yakunin, S., & Kovalenko, M. V. (2016) · Nanoscale · doi:10.1039/c5nr06890h · Cited by 275
Ma, F., Li, J., Li, W., Lin, N., Wang, L., & Qiao, J. (2017) · Chemical Science · doi:10.1039/c6sc03542f · Cited by 269
Wu, C., Zou, Y., Wu, T., Ban, M., Pecunia, V., Han, Y., Liu, Q., Song, T., Duhm, S., & Sun, B. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700338 · Cited by 263
The Physics of Light Emission in Halide Perovskite Devices
Stranks, S. D., Hoye, R. L. Z., Di, D., Friend, R. H., & Deschler, F. (2019) · Advanced Materials · doi:10.1002/adma.201803336 · Cited by 260
Metadata
- Authors
- Jaramillo-Quintero, O. A., Sanchez, R. S., Rincon, M., & Mora-Sero, I.
- Venue
- The Journal of Physical Chemistry Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-05-06
- Volume
- 6
- Issue
- 10
- Pages
- 1883-1890
- ISSN
- 1948-7185 (ISSN-L)
- OpenAlex
- W2145460865
- Cited by
- 251
- References
- 3
- FWCI
- 23.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.