Simple and Reliable Method for Studying the Adsorption Behavior of Aquivion Ionomers on Carbon Black Surfaces
The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Abstract
A better understanding of the interactions of carbon black and perfluorinated sulfonic acid (PFSA) ionomer helps to improve the effectiveness of polymer electrolyte membrane fuel cells. We present a simple and fast method for quantitative PFSA ionomer analysis based on suspension density measurements. After validation of the reliability of our method by thermogravimetric analysis and isothermal titration calorimetry (ITC), we investigate the adsorption equilibrium of short-side-chain PFSA ionomers of different equivalent weights (EW) and polarities on carbon black. The measured adsorption isotherms exhibit a plateau in the ionomer surface concentration for ionomer equilibrium concentrations ≤2 g/L. In this concentration range, the adsorption isotherms are described by the Langmuir model, whereby the surface concentrations in the plateau region are between 0.041 and 0.070 g/g. The plateau value of the ionomer surface concentration increases with EW and therefore with decreasing number of side chains with terminal sulfonic acid group per ionomer molecule, while the amount of adsorbed sulfonic acid groups remains constant for all investigated ionomers, resulting in similar ζ-potentials and sedimentation stability of the suspensions. The free energies of adsorption Δ G calculated from the association constants of the adsorption isotherms agree well with Δ G values obtained by isothermal titration calorimetry (ITC) and thus validate the adsorption isotherm measurement method. From the values of adsorption enthalpy Δ H ((-7.3 ± 0.8) kJ/mol) and entropy Δ S (ca. 100 J/(mol K)), which were extracted from ITC, we conclude that the ionomer adsorption on carbon black is a spontaneous physisorption process.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“It has been reported that the ionomer adsorption on carbon or catalyst follows the Langmuir isotherm for both SSC and LSC ionomer when the ionomer concentration is less than a certain value (at least 1.0 I/C [54]), i.e., there is an adsorption plateau, where the absorbed ionomer content barely increases with increasing I/C ratio [27,54,74].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [27]
In the citing paper
“The amount of the absorbed ionomer on catalyst commonly depends on the surface properties of the catalyst [117], EW of ionomer [27], or the dispersion medium [118].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [27]
Citations
Cites
State of Understanding of Nafion
Mauritz, K. A., & Moore, R. B. (2004) · Chemical Reviews · doi:10.1021/cr0207123 · Cited by 4,791
Raman spectroscopy of amorphous, nanostructured, diamond–like carbon, and nanodiamond
Ferrari, A. C., & Robertson, J. (2004) · Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2004.1452 · Cited by 2,689
Gierke, T. D., Munn, G. E., & Wilson, F. C. (1981) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1981.180191103 · Cited by 1,434
Adsorption of organic molecules from aqueous solutions on carbon materials
Moreno-Castilla, C. (2004) · Carbon · doi:10.1016/j.carbon.2003.09.022 · Cited by 1,423
Raman spectroscopic characterization of some commercially available carbon black materials
Jawhari, T., Roid, A., & Casado, J. (1995) · Carbon · doi:10.1016/0008-6223(95)00117-v · Cited by 1,333
Isothermal titration calorimetry
Freire, E., Mayorga, O. L., & Straume, M. (1990) · Analytical Chemistry · doi:10.1021/ac00217a002 · Cited by 602
Park, Y.-C., Tokiwa, H., Kakinuma, K., Watanabe, M., & Uchida, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.091 · Cited by 389
Thermal Behavior of Nafion Membranes
de Almeida, S. H., & Kawano, Y. (1999) · Journal of Thermal Analysis and Calorimetry · doi:10.1023/a:1010196226309 · Cited by 282
Carmo, M., Paganin, V. A., Rosolen, J. M., & Gonzalez, E. R. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.10.023 · Cited by 257
SCIENCE AND TECHNOLOGY OF RUBBER
White, J. L. (1983) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.56.35 · Cited by 238
Cited by
The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
“[143] determined PFSA ionomer adsorption isotherms on carbon black by measuring free ionomer equilibrium concentrations using a simple and fast technique involving density measurements using a U-tube oscillator and concluded that ionomer adsorption on carbon black is a spontaneous physisorption process.”
MethodUnraveling the core of fuel cell performance: engineering the ionomer/catalyst interface
Li, C., Kang, Y., Bird, A., Guo, F., Ilavský, J., Liu, Y., Cullen, D. A., Kusoglu, A., Weber, A. Z., Ferreira, P. J., et al. (2023) · Energy & Environmental Science · doi:10.1039/d2ee03553g · Cited by 131
Ionomer network of catalyst layers for proton exchange membrane fuel cell
Ren, H., Teng, Y., Meng, X., Fang, D., Huang, H., Geng, J., & Shao, Z. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230186 · Cited by 125
Probing Ionomer Interactions with Electrocatalyst Particles in Solution
Berlinger, S. A., McCloskey, B. D., & Weber, A. Z. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00866 · Cited by 93
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
Multicomponent, multiphase interactions in fuel-cell inks
Berlinger, S. A., Garg, S., & Weber, A. Z. (2021) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2021.100744 · Cited by 62
Guo, Y., Yang, D., Li, B., Yang, D., Ming, P., & Zhang, C. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c07070 · Cited by 65
Influence of ionomer adsorption on agglomerate structures in high-solid catalyst inks
Kumano, N., Kudo, K., Akimoto, Y., Ishii, M., & Nakamura, H. (2020) · Carbon · doi:10.1016/j.carbon.2020.07.047 · Cited by 61
Ren, H., Meng, X., Lin, Y., & Shao, Z. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230698 · Cited by 53
Berlinger, S. A., Chowdhury, A., Cleve, T. V., He, A., Dagan, N., Neyerlin, K. C., McCloskey, B. D., Radke, C. J., & Weber, A. Z. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c10499 · Cited by 50
Yang, D., Guo, Y., Tang, H., Wang, Y., Yang, D., Ming, P., Zhang, C., Li, B., & Zhu, S. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.07.172 · Cited by 44
Iridium Surface Oxide Affects the Nafion Interface in Proton-Exchange-Membrane Water Electrolysis
Berlinger, S. A., Peng, X., Luo, X., Dudenas, P. J., Zeng, G., Yu, H., Cullen, D. A., Weber, A. Z., Danilovic, N., & Kusoglu, A. (2024) · ACS Energy Letters · doi:10.1021/acsenergylett.4c01508 · Cited by 39
On the state and stability of fuel cell catalyst inks
Bapat, S., Giehl, C., Kohsakowski, S., Peinecke, V., Schäffler, M., & Segets, D. (2021) · Advanced Powder Technology · doi:10.1016/j.apt.2021.08.030 · Cited by 38
Self-citationBapat, S., & Segets, D. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c01467 · Cited by 37
Self-citationLi, H., You, J., Cheng, X., Luo, L., Yan, X., Yin, J., Shen, S., & Zhang, J. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c13450 · Cited by 35
Wu, D., Kayo, N., Jayawickrama, S. M., Phua, Y. K., Tanaka, N., & Fujigaya, T. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.11.116 · Cited by 35
Amin, A. S., Caidi, A., Lange, T., Radev, I., Sandbeck, D. J. S., Philippi, W., Kräenbring, M., Öztürk, M., Peinecke, V., Lerche, D., et al. (2024) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.202400069 · Cited by 30
Self-citationImpact of DAA/water composition on PFSA ionomer conformation
Hoffmann, E., Fischer, D., Thoma, M., Damm, C., Lobaz, V., Zhigunov, A., & Peukert, W. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.08.058 · Cited by 28
Self-citationRen, H., Meng, X., Lin, Y., & Shao, Z. (2023) · Electrochimica Acta · doi:10.1016/j.electacta.2023.142710 · Cited by 25
PFSA-Ionomer Adsorption to C and Pt/C Particles in Fuel-Cell Inks
Rajupet, S., Weber, A. Z., & Radke, C. J. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c00211 · Cited by 24
Temperature-induced shear-thinning in catalyst inks
Yoshimune, W., & Harada, M. (2021) · Electrochemistry Communications · doi:10.1016/j.elecom.2021.107099 · Cited by 22
Nitrogen Plasma Modified Carbons for PEMFC with Increased Interaction with Catalyst and Ionomer
Parnière, A., Blanchard, P., Cavaliere-Jaricot, S., Donzel, N., Prélot, B., Rozière, J., & Jones, D. J. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac609e · Cited by 18
Khandavalli, S., Park, J., Rice, R., Zhang, D. Y., Berlinger, S. A., Bender, G., Myers, D. J., Ulsh, M., & Mauger, S. A. (2024) · Soft Matter · doi:10.1039/d4sm00987h · Cited by 17
Grebener, L., Odungat, A. S., Zhu, Y., Pasdag, O., Radev, I., Nürenberg, E., Kubina, A., Peinecke, V., Kohsakowski, S., Segets, D., et al. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236457 · Cited by 12
Self-citationBurghart, J., Ovarlez, G., & Medina‐González, Y. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238497 · Cited by 10
Xie, M., Chen, J., & Li, B. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.02.052 · Cited by 9
Zhang, P., Yang, D., Li, B., Ming, P., Yang, D., & Zhang, C. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.05.069 · Cited by 6
Li, B., Ding, Z., Guo, Y., Wang, Y., Tang, H., Yang, D., Ming, P., & Zhang, C. (2021) · Physics of Fluids · doi:10.1063/5.0061704 · Cited by 6
Alkaline Stability of Anion-Conductive Ionomer Coated on a Carbon Surface
Han, Z., Motoishi, Y., & Fujigaya, T. (2019) · ACS Omega · doi:10.1021/acsomega.9b01466 · Cited by 5
Liu, P., Yang, D., Li, B., Zhang, L., Xiao, L., & Chen, H. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.151672 · Cited by 4
Kim, E. T., Kim, S., Park, S. C., Park, P., Ko, E., Joe, J., Son, H. Y., Kang, J., Kim, J. J., Cheon, K., et al. (2026) · Nature Communications · doi:10.1038/s41467-026-75113-6 · Cited by 3
“33 – 45 and Supplementary Tables 10, 11).”
InfluentialYomo, S., Yoshino, S., Hasegawa, N., Harada, M., & Yamakawa, S. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae2261 · Cited by 2
Free Ionomer Controls Adsorption in Electrolyzer Inks
Degirmenci, M., Rajupet, S., Soestrino, D., Khandavalli, S., Park, J., Perales, L., Blair, S. J., Weber, A. Z., & Berlinger, S. A. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/aeb7d2 · Cited by 1
Electrostatically Limited PFSA Ionomer Adsorption to Catalyst Particles in Catalyst Inks
Rajupet, S., Jacquin, N., Berlinger, S. A., Degirmenci, M., Babbe, F., Stovall, T. N., Kushner, D. I., Radke, C. J., & Weber, A. Z. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c09696 · Cited by 1
Tverdomed, S. N., Hirschberg, M. E., Pajkert, R., & Röschenthaler, G. (2021) · Journal of Fluorine Chemistry · doi:10.1016/j.jfluchem.2021.109864 · Cited by 1
Bapat, S., & Segets, D. (2020) · ChemRxiv · doi:10.26434/chemrxiv.12278360
Self-citationQuantum Beam Analysis for Development of Polymer Electrolyte Fuel Cells
吉宗, 航., ヨシムネ, ワ., & YOSHIMUNE, W. (2024) · Institutional Repositories DataBase (IRDB)
呉, 丹. (2025) · Institutional Repositories DataBase (IRDB)
Einfluss von Materialparametern auf die Adsorption von Ionomeren auf Rußoberflächen
Thoma, M. (2025) · doi:10.25593/open-fau-2312
Self-citationYang, D., Chu, T., Zhang, Z., Wang, J., zheng, W., Yang, D., Ming, P., & Li, B. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.239423
Burghart, J., Cogné, H., Meeker, S. P., Medina‐González, Y., & Ovarlez, G. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c01444
Grebener, L., Odungat, A. S., Zhu, Y., Pasdag, O., Heckenbach, S., Kubina, A., Kohsakowski, S., Özcan, F., & Segets, D. (2026) · Engineering Archive (engrXiv) · doi:10.31224/7584
Self-citationZhang, A., Cheng, F., Wang, M., Wei, X., Wang, R., Zhao, S., Chen, J., Tian, T., & Tang, H. (2026) · Advanced Functional Materials · doi:10.1002/adfm.78262
Metadata
- Authors
- Thoma, M., Lin, W., Hoffmann, E., Sattes, M.-M., Segets, D., Damm, C., & Peukert, W.
- Affiliations
- Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Corresponding author
- Peukert, Wolfgang
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-09-20
- Volume
- 34
- Issue
- 41
- Pages
- 12324-12334
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2891195400
- Cited by
- 37
- References
- 48
- Citations by year
- 2026: 3 · 2025: 6 · 2024: 5 · 2023: 3 · 2022: 4 · 2021: 10 · 2020: 5 · 2019: 1
- FWCI
- 1.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Langmuir (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Deutsche Forschungsgemeinschaft
- Bayerisches Staatsministerium?f?r Wirtschaft und Medien,?Energie und Technologie
- Greenerity GmbH
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Electrostatics and Colloid Interactions
- Keywords
- perfluorinated sulfonic acid ionomers, carbon black, ionomer adsorption, Langmuir isotherm, equivalent weight, adsorption free energy, physisorption, proton exchange membrane fuel cells, zeta potential, sedimentation stability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.