Simple and Reliable Method for Studying the Adsorption Behavior of Aquivion Ionomers on Carbon Black Surfaces
The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Abstract
A better understanding of the interactions of carbon black and perfluorinated sulfonic acid (PFSA) ionomer helps to improve the effectiveness of polymer electrolyte membrane fuel cells. We present a simple and fast method for quantitative PFSA ionomer analysis based on suspension density measurements. After validation of the reliability of our method by thermogravimetric analysis and isothermal titration calorimetry (ITC), we investigate the adsorption equilibrium of short-side-chain PFSA ionomers of different equivalent weights (EW) and polarities on carbon black. The measured adsorption isotherms exhibit a plateau in the ionomer surface concentration for ionomer equilibrium concentrations ≤2 g/L. In this concentration range, the adsorption isotherms are described by the Langmuir model, whereby the surface concentrations in the plateau region are between 0.041 and 0.070 g/g. The plateau value of the ionomer surface concentration increases with EW and therefore with decreasing number of side chains with terminal sulfonic acid group per ionomer molecule, while the amount of adsorbed sulfonic acid groups remains constant for all investigated ionomers, resulting in similar ζ-potentials and sedimentation stability of the suspensions. The free energies of adsorption Δ G calculated from the association constants of the adsorption isotherms agree well with Δ G values obtained by isothermal titration calorimetry (ITC) and thus validate the adsorption isotherm measurement method. From the values of adsorption enthalpy Δ H ((-7.3 ± 0.8) kJ/mol) and entropy Δ S (ca. 100 J/(mol K)), which were extracted from ITC, we conclude that the ionomer adsorption on carbon black is a spontaneous physisorption process.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“It has been reported that the ionomer adsorption on carbon or catalyst follows the Langmuir isotherm for both SSC and LSC ionomer when the ionomer concentration is less than a certain value (at least 1.0 I/C [54]), i.e., there is an adsorption plateau, where the absorbed ionomer content barely increases with increasing I/C ratio [27,54,74].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [27]
In the citing paper
“The amount of the absorbed ionomer on catalyst commonly depends on the surface properties of the catalyst [117], EW of ionomer [27], or the dispersion medium [118].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [27]
Citations
Cites
State of Understanding of Nafion
Mauritz, K. A., & Moore, R. B. (2004) · Chemical Reviews · doi:10.1021/cr0207123 · Cited by 4,791
Raman spectroscopy of amorphous, nanostructured, diamond–like carbon, and nanodiamond
Ferrari, A. C., & Robertson, J. (2004) · Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2004.1452 · Cited by 2,689
Gierke, T. D., Munn, G. E., & Wilson, F. C. (1981) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1981.180191103 · Cited by 1,434
Adsorption of organic molecules from aqueous solutions on carbon materials
Moreno-Castilla, C. (2004) · Carbon · doi:10.1016/j.carbon.2003.09.022 · Cited by 1,423
Raman spectroscopic characterization of some commercially available carbon black materials
Jawhari, T., Roid, A., & Casado, J. (1995) · Carbon · doi:10.1016/0008-6223(95)00117-v · Cited by 1,333
Isothermal titration calorimetry
Freire, E., Mayorga, O. L., & Straume, M. (1990) · Analytical Chemistry · doi:10.1021/ac00217a002 · Cited by 602
Park, Y.-C., Tokiwa, H., Kakinuma, K., Watanabe, M., & Uchida, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.091 · Cited by 389
Thermal Behavior of Nafion Membranes
de Almeida, S. H., & Kawano, Y. (1999) · Journal of Thermal Analysis and Calorimetry · doi:10.1023/a:1010196226309 · Cited by 282
Carmo, M., Paganin, V. A., Rosolen, J. M., & Gonzalez, E. R. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.10.023 · Cited by 257
SCIENCE AND TECHNOLOGY OF RUBBER
White, J. L. (1983) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.56.35 · Cited by 238
Chakraborty, S., Joshi, P., Shanker, V., Ansari, Z. A., Singh, S. P., & Chakrabarti, P. (2011) · Langmuir · doi:10.1021/la200787t · Cited by 217
Proton exchange membranes based on the short-side-chain perfluorinated ionomer
Ghielmi, A., Vaccarono, P., Troglia, C., & Arcella, V. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.12.068 · Cited by 200
Small-Angle Scattering Study of Perfluorosulfonated Ionomer Solutions
Loppinet, B., Gebel, G., & Williams, C. E. (1997) · The Journal of Physical Chemistry B · doi:10.1021/jp9623047 · Cited by 199
Nagarale, R. K., Gohil, G. S., Shahi, V. K., & Rangarajan, R. (2004) · Macromolecules · doi:10.1021/ma048404p · Cited by 180
Jalani, N. H., & Datta, R. (2005) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.04.047 · Cited by 178
Characterization and Transport Properties of Nafion/Polyaniline Composite Membranes
Tan, S., & Bélanger, D. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp054724e · Cited by 174
Segets, D., Marczak, R., Schäfer, S., Paula, C., Gnichwitz, J.-F., Hirsch, A., & Peukert, W. (2011) · ACS Nano · doi:10.1021/nn200465b · Cited by 151
Self-citationSiracusano, S., Baglio, V., Stassi, A., Merlo, L., Moukheiber, E., & Aricò, A. S. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.04.030 · Cited by 123
19F NMR studies of Nafion™ ionomer adsorption on PEMFC catalysts and supporting carbons
MA, S., CHEN, Q., JOGENSEN, F., Stein, P. C., & Skou, E. M. (2007) · Solid State Ionics · doi:10.1016/j.ssi.2007.10.007 · Cited by 120
Rodlike Colloidal Structure of Short Pendant Chain Perfluorinated Ionomer Solutions
Loppinet, B., & Gebel, G. (1998) · Langmuir · doi:10.1021/la9710987 · Cited by 117
Rod like micellar structures in perfluorinated ionomer solutions
Aldebert, P., Dreyfus, B., Gebel, G., Nakamura, N., Pineri, M., & Volino, F. (1988) · Journal de Physique · doi:10.1051/jphys:0198800490120210100 · Cited by 115
Small-angle neutron scattering of perfluorosulfonated ionomers in solution
Aldebert, P., Dreyfus, B., & Pineri, M. (1986) · Macromolecules · doi:10.1021/ma00164a035 · Cited by 115
Falconer, R. J. (2016) · Journal of Molecular Recognition · doi:10.1002/jmr.2550 · Cited by 106
Molecular Modeling of Proton Transport in the Short-Side-Chain Perfluorosulfonic Acid Ionomer
Hristov, I. H., Paddison, S. J., & Paul, R. (2008) · The Journal of Physical Chemistry B · doi:10.1021/jp7108434 · Cited by 103
Benselfelt, T., Cranston, E. D., Ondaral, S., Johansson, E. E., Brumer, H., Rutland, M. W., & Wågberg, L. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00561 · Cited by 91
Molecular Dynamics Study of Ionomer Adsorption at a Carbon Surface in Catalyst Ink
Mashio, T., Ohma, A., & Tokumasu, T. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.04.004 · Cited by 84
Dispersion of Rod-like Particles of Nafion in Salt-Free Water/1-Propanol and Water/Ethanol Solutions
Yamaguchi, M., Matsunaga, T., Amemiya, K., Ohira, A., Hasegawa, N., Shinohara, K., Ando, M., & Yoshida, T. (2014) · The Journal of Physical Chemistry B · doi:10.1021/jp506814m · Cited by 81
Lin, W. M., Walter, J., Burger, A., Maid, H., Hirsch, A., Peukert, W., & Segets, D. (2014) · Chemistry of Materials · doi:10.1021/cm504080d · Cited by 79
Self-citationKusano, T., Hiroi, T., Amemiya, K., Ando, M., Takahashi, T., & Shibayama, M. (2015) · Polymer Journal · doi:10.1038/pj.2015.36 · Cited by 74
Wang, Y., Jin, J., Yang, S., Li, G., & Qiao, J. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.01.134 · Cited by 71
Dispersion Stability of Single-Walled Carbon Nanotubes Using Nafion in Bisolvent
Lee, J.-H., Paik, U., Choi, J.-Y., Kim, K. K., Yoon, S.-M., Lee, J., Kim, B.-K., Kim, J. M., Park, M. H., Yang, C. W., et al. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp0670485 · Cited by 71
Optimum between purification and colloidal stability of ZnO nanoparticles
Marczak, R., Segets, D., Voigt, M. N., & Peukert, W. (2010) · Advanced Powder Technology · doi:10.1016/j.apt.2009.10.005 · Cited by 69
Self-citationAndersen, S. M. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.07.049 · Cited by 61
Zhang, H., Li, J. S., Tang, H., Lin, Y., & Pan, M. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.01.076 · Cited by 60
Siracusano, S., Baglio, V., Moukheiber, E., Merlo, L., & Aricò, A. S. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.04.159 · Cited by 58
Ravi, V., Binz, J. M., & Rioux, R. M. (2013) · Nano Letters · doi:10.1021/nl402315z · Cited by 56
Andersen, S. M., Borghei, M., Dhiman, R., Ruiz, V., Kauppinen, E., & Skou, E. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp501088d · Cited by 55
Andersen, S. M., Borghei, M., Dhiman, R., Jiang, H., Ruiz, V., Kauppinen, E. I., & Skou, E. M. (2014) · Carbon · doi:10.1016/j.carbon.2014.01.032 · Cited by 44
Wu, X., Scott, K., & Puthiyapura, V. K. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.06.093 · Cited by 44
Yamaguchi, T., Nakahara, E., & Koda, S. (2014) · The Journal of Physical Chemistry B · doi:10.1021/jp502631q · Cited by 44
Increasing Fuel Cell Efficiency by Using Ultra-Low Equivalent Weight Ionomers
Yandrasits, M., Lindell, M., Schaberg, M., & Kurkowski, M. (2017) · The Electrochemical Society Interface · doi:10.1149/2.f05171if · Cited by 43
Unspecific ligand binding yielding stable colloidal ITO-nanoparticle dispersions
Grote, C., Chiad, K., Vollmer, D., & Garnweitner, G. (2011) · Chemical Communications · doi:10.1039/c1cc14630k · Cited by 40
Effects of Perfluorosulfonic Acid Adsorption on the Stability of Carbon Black Suspensions
Mizukawa, H., & Kawaguchi, M. (2009) · Langmuir · doi:10.1021/la9025188 · Cited by 37
Relationship between the chemical properties of bitumens and their colloidal properties in water
Salou, M., Siffert, B., & Jada, A. (1998) · Fuel · doi:10.1016/s0016-2361(97)00208-1 · Cited by 30
Lisi, R. D., Lazzara, G., Lombardo, R., Milioto, S., Muratore, N., & Liveri, M. L. T. (2005) · Physical Chemistry Chemical Physics · doi:10.1039/b510891h · Cited by 28
Jiang, X., Wang, X., Shen, L., Wu, Q., Wang, Y., Ma, Y., Wang, X., & Hu, Z. (2016) · CHINESE JOURNAL OF CATALYSIS (CHINESE VERSION) · doi:10.1016/s1872-2067(15)61117-2 · Cited by 25
Size-exclusion chromatography of perfluorosulfonated ionomers
Mourey, T. H., Slater, L. A., Galipo, R. C., & Koestner, R. J. (2011) · Journal of Chromatography A · doi:10.1016/j.chroma.2011.06.078 · Cited by 16
Wawra, S. E., Thoma, M., Walter, J., Lübbert, C., Thajudeen, T., Damm, C., & Peukert, W. (2018) · European Biophysics Journal · doi:10.1007/s00249-018-1314-2 · Cited by 12
Self-citation
Cited by
The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
“[143] determined PFSA ionomer adsorption isotherms on carbon black by measuring free ionomer equilibrium concentrations using a simple and fast technique involving density measurements using a U-tube oscillator and concluded that ionomer adsorption on carbon black is a spontaneous physisorption process.”
MethodUnraveling the core of fuel cell performance: engineering the ionomer/catalyst interface
Li, C., Kang, Y., Bird, A., Guo, F., Ilavský, J., Liu, Y., Cullen, D. A., Kusoglu, A., Weber, A. Z., Ferreira, P. J., et al. (2023) · Energy & Environmental Science · doi:10.1039/d2ee03553g · Cited by 131
Ionomer network of catalyst layers for proton exchange membrane fuel cell
Ren, H., Teng, Y., Meng, X., Fang, D., Huang, H., Geng, J., & Shao, Z. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230186 · Cited by 125
Probing Ionomer Interactions with Electrocatalyst Particles in Solution
Berlinger, S. A., McCloskey, B. D., & Weber, A. Z. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00866 · Cited by 93
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
Metadata
- Authors
- Thoma, M., Lin, W., Hoffmann, E., Sattes, M.-M., Segets, D., Damm, C., & Peukert, W.
- Affiliations
- Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Corresponding author
- Peukert, Wolfgang
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-09-20
- Volume
- 34
- Issue
- 41
- Pages
- 12324-12334
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2891195400
- Cited by
- 37
- References
- 48
- Citations by year
- 2026: 3 · 2025: 6 · 2024: 5 · 2023: 3 · 2022: 4 · 2021: 10 · 2020: 5 · 2019: 1
- FWCI
- 1.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Langmuir (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Deutsche Forschungsgemeinschaft
- Bayerisches Staatsministerium?f?r Wirtschaft und Medien,?Energie und Technologie
- Greenerity GmbH
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Electrostatics and Colloid Interactions
- Keywords
- perfluorinated sulfonic acid ionomers, carbon black, ionomer adsorption, Langmuir isotherm, equivalent weight, adsorption free energy, physisorption, proton exchange membrane fuel cells, zeta potential, sedimentation stability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.