The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Dual-Responsive Hydrogels for Direct-Write 3D Printing
Abstract
Direct-write 3D printing enables the fabrication of three-dimensional objects via the extrusion from a nozzle. Stimuli responsive materials that shear-thin are well-suited as inks for these 3D printing systems. Poly(isopropyl glycidyl ether)- block -poly(ethylene oxide)- block -poly(isopropyl glycidyl ether) ABA triblock copolymers were synthesized using controlled ring-opening polymerization to afford dual stimuli-responsive polymers that respond to both shear forces and temperature. These polymers were demonstrated to form hydrogels in water. The gels were observed to be thermoreversible—driven by the lower critical solution temperature of the poly(isopropyl glycidyl ether) block which helps facilitate loading of the ink into the printer syringe. Rheological studies demonstrated that the gels had a rapid and reversible modulus response to shear stress. Thus, these materials were suitable as inks for direct-write 3D printing, as they were easily extruded during printing and maintained sufficient mechanical integrity which was necessary to support the next printed layer. Printed structures of high aspect ratio pillars and stacked layers were successfully demonstrated. These types of 3D hydrogel structures may ultimately have an impact in the biomedical field for applications such as tissue engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrogels in Biology and Medicine: From Molecular Principles to Bionanotechnology
Peppas, N. A., Hilt, J. Z., Khademhosseini, A., & Langer, R. (2006) · Advanced Materials · doi:10.1002/adma.200501612 · Cited by 4,109
Polymeric micelles—A new generation of colloidal drug carriers
Jones, M.-C., & Leroux, J.-C. (1999) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(99)00039-9 · Cited by 1,256
Cited by
3D printing: Printing precision and application in food sector
Liu, Z., Zhang, M., Bhandari, B., & Wang, Y. (2017) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2017.08.018 · Cited by 858
Self-citationRecent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Liu, Z., Bhandari, B., Prakash, S., Mantihal, S., & Zhang, M. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.08.026 · Cited by 530
Self-citationYang, F., Zhang, M., Bhandari, B., & Liu, Y. (2018) · LWT · doi:10.1016/j.lwt.2017.08.054 · Cited by 479
Self-citation3D and 4D Printing of Polymers for Tissue Engineering Applications
Tamay, D. G., Dursun Usal, T., Alagoz, A. S., Yucel, D., Hasirci, N., & Hasirci, V. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00164 · Cited by 417
Metadata
- Authors
- Zhang, M., Vora, A., Han, W., Wojtecki, R. J., Maune, H., Le, A. B. A., Thompson, L. E., McClelland, G. M., Ribet, F., Engler, A. C., & Nelson, A.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-08-31
- Volume
- 48
- Issue
- 18
- Pages
- 6482-6488
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2510335982
- Cited by
- 178
- References
- 2
- FWCI
- 6.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Dual-Responsive Hydrogels for Direct-Write 3D Printing. https://app.cochat.ai/papers/10.1021/acs.macromol.5b01550
- The paper
- Zhang, M., Vora, A., Han, W., Wojtecki, R. J., Maune, H., Le, A. B. A., Thompson, L. E., McClelland, G. M., Ribet, F., Engler, A. C., & Nelson, A. (2015). Dual-Responsive Hydrogels for Direct-Write 3D Printing. Macromolecules. https://doi.org/10.1021/acs.macromol.5b01550
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.