The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance
Abstract
Lithium metal is one of the most attractive anode materials for next-generation lithium batteries due to its high specific capacity and low electrochemical potential. However, the poor cycling performance and serious safety hazards, caused by the growth of dendritic and mossy lithium, has long hindered the application of lithium metal based batteries. Herein, we reported a rational design of free-standing Cu nanowire (CuNW) network to suppress the growth of dendritic lithium via accommodating the lithium metal in three-dimensional (3D) nanostructures. We demonstrated that as high as 7.5 mA h cm(-2) of lithium can be plated into the free-standing copper nanowire (CuNW) current collector without the growth of dendritic lithium. The lithium metal anode based on the CuNW exhibited high Coulombic efficiency (average 98.6% during 200 cycles) and outstanding rate performance owing to the suppression of lithium dendrite growth and high conductivity of CuNW network. Our results demonstrate that the rational nanostructural design of current collector could be a promising strategy to improve the performance of lithium metal anode enabling its application in next-generation lithium-metal based batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Lithium-ion batteries. A look into the future
Scrosati, B., Hassoun, J., & Sun, Y.-K. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01388b · Cited by 2,595
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Self-citationAurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Self-citationMetallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
A review of lithium deposition in lithium-ion and lithium metal secondary batteries
Li, Z., Huang, J., Yann Liaw, B., Metzler, V., & Zhang, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.099 · Cited by 938
Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
History, Evolution, and Future Status of Energy Storage
Whittingham, M. S. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190170 · Cited by 873
Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes
Harry, K. J., Hallinan, D. T., Parkinson, D. Y., MacDowell, A. A., & Balsara, N. P. (2014) · Nature Materials · doi:10.1038/nmat3793 · Cited by 868
Liang, Z., Lin, D., Zhao, J., Lu, Z., Liu, Y., Liu, C., Lu, Y., Wang, H., Yan, K., Tao, X., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1518188113 · Cited by 846
Yan, K., Lee, H.-W., Gao, T., Zheng, G., Yao, H., Wang, H., Lu, Z., Zhou, Y., Liang, Z., Liu, Z., et al. (2014) · Nano Letters · doi:10.1021/nl503125u · Cited by 742
Self-citationCarbon materials for lithium-ion rechargeable batteries
Flandrois, S., & Simon, B. (1999) · Carbon · doi:10.1016/s0008-6223(98)00290-5 · Cited by 742
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
Rathmell, A. R., Bergin, S. M., Hua, Y., Li, Z., & Wiley, B. J. (2010) · Advanced Materials · doi:10.1002/adma.201000775 · Cited by 700
Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes
Liang, Z., Zheng, G., Liu, C., Liu, N., Li, W., Yan, K., Yao, H., Hsu, P.-C., Chu, S., & Cui, Y. (2015) · Nano Letters · doi:10.1021/nl5046318 · Cited by 540
Self-citation7Li MRI of Li batteries reveals location of microstructural lithium
Chandrashekar, S., Trease, N. M., Chang, H. J., Du, L.-S., Grey, C. P., & Jerschow, A. (2012) · Nature Materials · doi:10.1038/nmat3246 · Cited by 499
Lithium metal stripping/plating mechanisms studies: A metallurgical approach
Gireaud, L., Grugeon, S., Laruelle, S., Yrieix, B., & Tarascon, J.-M. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.07.037 · Cited by 436
Cheng, X.-B., Peng, H.-J., Huang, J.-Q., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2015) · ACS Nano · doi:10.1021/acsnano.5b01990 · Cited by 321
Zhamu, A., Chen, G., Liu, C., Neff, D., Fang, Q., Yu, Z., Xiong, W., Wang, Y., Wang, X., & Jang, B. Z. (2012) · Energy Environ. Sci. · doi:10.1039/c2ee02911a · Cited by 300
Guo, J., Wen, Z., Wu, M., Jin, J., & Liu, Y. (2015) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.12.008 · Cited by 273
Stabilized Lithium–Metal Surface in a Polysulfide-Rich Environment of Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501352e · Cited by 164
Future prospects of the lithium metal anode
Takehara, Z. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02546-3 · Cited by 135
Cited by
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Recent Advances in Aqueous Zinc-Ion Batteries
Fang, G., Zhou, J., Pan, A., & Liang, S. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01426 · Cited by 2,258
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Advancing Lithium Metal Batteries
Liu, B., Zhang, J.-G., & Xu, W. (2018) · Joule · doi:10.1016/j.joule.2018.03.008 · Cited by 1,647
Metadata
- Authors
- Lu, L.-L., Ge, J., Yang, J.-N., Chen, S.-M., Yao, H.-B., Zhou, F., & Yu, S.-H.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-06-09
- Volume
- 16
- Issue
- 7
- Pages
- 4431-4437
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2419183065
- Cited by
- 678
- References
- 34
- FWCI
- 42.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.