Monolithically Integrated Perovskite Semiconductor Lasers on Silicon Photonic Chips by Scalable Top-Down Fabrication
Open accessThe DOI matches its Crossref record; 48 of the 50 references it cites were found in a registry or an index; 5 of the 16 sources its claims cite were checked for support.
Abstract
High Resolution Image Download MS PowerPoint Slide Metal-halide perovskites are promising lasing materials for the realization of monolithically integrated laser sources, the key components of silicon photonic integrated circuits (PICs). Perovskites can be deposited from solution and require only low-temperature processing, leading to significant cost reduction and enabling new PIC architectures compared to state-of-the-art lasers realized through the costly and inefficient hybrid integration of III−V semiconductors. Until now, however, due to the chemical sensitivity of perovskites, no microfabrication process based on optical lithography (and, therefore, on existing semiconductor manufacturing infrastructure) has been established. Here, the first methylammonium lead iodide perovskite microdisc lasers monolithically integrated into silicon nitride PICs by such a top-down process are presented. The lasers show a record low lasing threshold of 4.7 μJcm –2 at room temperature for monolithically integrated lasers, which are complementary metal–oxide–semiconductor compatible and can be integrated in the back-end-of-line processes.
Overview
CoChat Summary
TL;DR
The paper reports MAPbI3 perovskite micro-disc lasers monolithically integrated into silicon nitride photonic integrated circuits using a scalable top-down optical lithography and ICP RIE process. The lasers show a record low room-temperature lasing threshold of 4.7 µJ cm⁻² for monolithically integrated CMOS-compatible lasers, with reproducibility across 83 devices on 4 PICs.
Key findings
- MAPbI3 micro-disc lasers coupled to Si3N4 bus waveguides lased at room temperature under optical pumping, with thresholds of 7.1 µJ cm⁻², 4.7 µJ cm⁻², and 7.1 µJ cm⁻² for radii of 4.3 µm, 6 µm, and 8.3 µm, respectively; emission saturated at 18, 11, and 19 µJ cm⁻².
- The best lasing peak had a FWHM of 1.1 nm and Q = 709; scattering losses were estimated at 27.7 dB/cm due to perovskite roughness.
- 83 tested devices on 4 different PICs showed comparable lasing thresholds and spectral characteristics; FSR was inversely proportional to disc diameter, but measured FSRs exceeded calculated values by up to 52%, attributed to chlorine intake at etched edges.
- A polycrystalline FDTD model using random grains of 50–200 nm reproduced measured behavior: simulated roundtrip transmission was 0.56 versus 0.44 extracted from a 4.3 µm disc with Q = 650.
Methods
- Fabrication: 6-inch Si wafers with 2.2 µm thermal SiO2, 250 nm LPCVD Si3N4 waveguides, LTO SiO2 planarization; MAPbI3 deposited by spin-coating from 1 M MAI/PbI2/DMSO in DMF with chlorobenzene drip and two-step annealing (45 °C, 5 min + 100 °C, 10 min); patterned by double-layer resist optical contact lithography and single-step Cl2/CF4 ICP RIE; 1 µm PMMA cladding.
- Characterization: SEM, XRD, EDX, and PL mapping; optical pumping with 120 fs pulses at 630 nm and 250 kHz at room temperature in ambient conditions; output collected from the Si3N4 bus waveguide edge 5 mm away, passed through a polarizer, and recorded with a 0.4 nm resolution spectrometer.
- Simulations: analytical WGM model and Lumerical FDTD for directional coupler optimization, including a model with randomly generated crystal grains to represent polycrystalline MAPbI3 morphology.
Limitations
- Stated: the lithographic tool could not achieve the optimal 150 nm bus waveguide offset and 50 nm gap, so disc positions were varied in 250 nm steps over ±1.25 µm to ensure at least one nearly optimal structure.
- Stated: perovskite chemical reactivity and instability remain barriers to established semiconductor fabrication; devices were protected only by 1 µm PMMA, and commercial reliability would require hermetic packaging, moisture barriers, and stability/degradation studies.
- Evident: lasing is optically pumped, not electrically pumped; the paper notes that electrically pumped lasers will require efficient carrier injection. The low Q (709) and high scattering losses, measured-versus-calculated FSR discrepancy up to 52%, and FSR standard deviation of 1.3 nm within a sample all indicate performance limits tied to perovskite roughness and polycrystalline morphology.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
4 Valid · 1 Not valid · 9 Not checked · 40 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“The refractive index is coupled to the absorption through the Kramers-Kronig relation:”
What the sources say
- Supportedcites [40] (40) Price, M. B.; Butkus, J.; Jellicoe, T. C.; Sadhanala, A.; Briane, A.; Halpert, J. E.; Broch, K.; Hodgkiss, J. M.; Friend, R. H.; Deschler, F. Nat. Commun. 2015 , 6 (1), 8420. - source
In Results, under “Photoinduced reflection due to refractive index changes,” the paper says it obtains a change in absorption coefficient and subsequently a change in refractive index through a Kramers–Kronig transformation. This directly supports the stated coupling. (LLM, conf=0.94)
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“and is the record value for monolithicaly integrated CMOS compatible lasers. 42”
What the sources say
- Could not verifycites [42] (42) Xie, W.; Stöferle, T.; Rainò, G.; Aubert, T.; Bisschop, S.; Zhu, Y.; Mahrt, R. F.; Geiregat, P.; Brainis, E.; Hens, Z.; Van Thourhout, D. Adv. Mater. 2017 , 29 (16), 1604866. - sourceExperimental — accuracy not yet measured
The device characterization (p. 6) reports linewidth narrowing from 0.58 nm to 0.14 nm, and the fabrication description (p. 3) calls the process CMOS-like. Our copy does not compare that linewidth with other monolithically integrated CMOS-compatible lasers or identify any linewidth as a record (searched: linewidth, record, and CMOS-compatible integrated lasers). (LLM, conf=0.75)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The FWHM of the single lasing peak just above the threshold was 1.1 nm”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“gradually increased to 4 nm at the excitation of ~10 µ Jcm -2”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Here, the first methylammonium lead iodide perovskite micro-disc lasers monolithically integrated into silicon nitride PICs by such a top-down process is presented.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
29 more claims
Create a free account to see all 54 claims and every source verdict.
- It may state two separate claims as one. 15
- Probably not a substantial claim. 4
- The quote only partly states this claim. 1
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Self-citationLead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
Schawlow, A. L., & Townes, C. H. (1958) · Physical Review · doi:10.1103/physrev.112.1940 · Cited by 2,354
Deschler, F., Price, M., Pathak, S., Klintberg, L. E., Jarausch, D.-D., Higler, R., Hüttner, S., Leijtens, T., Stranks, S. D., Snaith, H. J., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5005285 · Cited by 1,753
Lasing in direct-bandgap GeSn alloy grown on Si
Wirths, S., Geiger, R., von den Driesch, N., Mussler, G., Stoica, T., Mantl, S., Ikonic, Z., Luysberg, M., Chiussi, S., Hartmann, J. M., et al. (2015) · Nature Photonics · doi:10.1038/nphoton.2014.321 · Cited by 1,255
Electrically pumped continuous-wave III–V quantum dot lasers on silicon
Chen, S., Li, W., Wu, J., Jiang, Q., Tang, M., Shutts, S., Elliott, S. N., Sobiesierski, A., Seeds, A. J., Ross, I., et al. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.21 · Cited by 877
Price, M. B., Butkus, J., Jellicoe, T. C., Sadhanala, A., Briane, A., Halpert, J. E., Broch, K., Hodgkiss, J. M., Friend, R. H., & Deschler, F. (2015) · Nature Communications · doi:10.1038/ncomms9420 · Cited by 704
Optical Cavity Effects in ZnO Nanowire Lasers and Waveguides
Johnson, J. C., Yan, H., Yang, P., & Saykally, R. J. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp034482n · Cited by 630
Ambipolar solution-processed hybrid perovskite phototransistors
Li, F., Ma, C., Wang, H., Hu, W., Yu, W., Sheikh, A. D., & Wu, T. (2015) · Nature Communications · doi:10.1038/ncomms9238 · Cited by 629
Tuning the Light Emission Properties by Band Gap Engineering in Hybrid Lead Halide Perovskite
D’Innocenzo, V., Srimath Kandada, A. R., De Bastiani, M., Gandini, M., & Petrozza, A. (2014) · Journal of the American Chemical Society · doi:10.1021/ja511198f · Cited by 623
Self-citation
Cited by
Park, Y.-S., Roh, J., Diroll, B. T., Schaller, R. D., & Klimov, V. I. (2021) · Nature Reviews Materials · doi:10.1038/s41578-020-00274-9 · Cited by 421
Halide Perovskite Semiconductor Lasers: Materials, Cavity Design, and Low Threshold
Zhang, Q., Shang, Q., Su, R., Do, T. T. H., & Xiong, Q. (2021) · Nano Letters · doi:10.1021/acs.nanolett.0c03593 · Cited by 417
Metal Halide Perovskites for Laser Applications
Lei, L., Dong, Q., Gundogdu, K., & So, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010144 · Cited by 378
Pourdavoud, N., Haeger, T., Mayer, A., Cegielski, P. J., Giesecke, A. L., Heiderhoff, R., Olthof, S., Zaefferer, S., Shutsko, I., Henkel, A., et al. (2019) · Advanced Materials · doi:10.1002/adma.201903717 · Cited by 208
Self-citationSingle-Mode Lasing from Imprinted Halide-Perovskite Microdisks
Zhizhchenko, A., Syubaev, S., Berestennikov, A., Yulin, A. V., Porfirev, A., Pushkarev, A., Shishkin, I., Golokhvast, K., Bogdanov, A. A., Zakhidov, A. A., et al. (2019) · ACS Nano · doi:10.1021/acsnano.8b08948 · Cited by 187
Open-Access Silicon Photonics Platforms in Europe
Rahim, A., Goyvaerts, J., Szelag, B., Fedeli, J.-M., Absil, P., Aalto, T., Harjanne, M., Littlejohns, C., Reed, G., Winzer, G., et al. (2019) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2019.2915949 · Cited by 180
“and integrated perovskite lasers [72], [73].”
Self-citationProspects and challenges of colloidal quantum dot laser diodes
Jung, H., Ahn, N., & Klimov, V. I. (2021) · Nature Photonics · doi:10.1038/s41566-021-00827-6 · Cited by 164
Inorganic and Layered Perovskites for Optoelectronic Devices
Fakharuddin, A., Shabbir, U., Qiu, W., Iqbal, T., Sultan, M., Heremans, P. L., & Schmidt‐Mende, L. (2019) · Advanced Materials · doi:10.1002/adma.201807095 · Cited by 148
Lead halide perovskite vortex microlasers
Sun, W., Liu, Y., Qu, G., Fan, Y., Dai, W., Wang, Y., Song, Q., Han, J., & Xiao, S. (2020) · Nature Communications · doi:10.1038/s41467-020-18669-1 · Cited by 134
Micro‐ and Nanostructured Lead Halide Perovskites: From Materials to Integrations and Devices
Wang, K., Xing, G., Song, Q., & Xiao, S. (2021) · Advanced Materials · doi:10.1002/adma.202000306 · Cited by 126
Jeong, B., Han, H., & Park, C. (2020) · Advanced Materials · doi:10.1002/adma.202000597 · Cited by 121
Emerging material platforms for integrated microcavity photonics
Liu, J., Bo, F., Chang, L., Dong, C., Ou, X., Regan, B., Shen, X., Song, Q., Yao, B., Zhang, W., et al. (2022) · Science China Physics Mechanics and Astronomy · doi:10.1007/s11433-022-1957-3 · Cited by 122
Ten Years of Perovskite Lasers
Shi, Y., Deng, X., Gan, Y., Xu, L., Zhang, Q., & Xiong, Q. (2025) · Advanced Materials · doi:10.1002/adma.202413559 · Cited by 121
Metal‐Halide Perovskite Lasers: Cavity Formation and Emission Characteristics
Moon, J., Mehta, Y., Gündoğdu, K., So, F. F., & Gu, Q. (2023) · Advanced Materials · doi:10.1002/adma.202211284 · Cited by 98
Active meta-optics and nanophotonics with halide perovskites
Berestennikov, A. S., Voroshilov, P. M., Makarov, S., & Kivshar, Y. S. (2019) · Applied Physics Reviews · doi:10.1063/1.5107449 · Cited by 92
Light‐Emitting Nanophotonic Designs Enabled by Ultrafast Laser Processing of Halide Perovskites
Zhizhchenko, A. Y., Tonkaev, P., Gets, D., Larin, A., Zuev, D., Starikov, S., Pustovalov, E. V., Zakharenko, A. M., Kulinich, S. A., Juodkazis, S., et al. (2020) · Small · doi:10.1002/smll.202000410 · Cited by 89
Metal Halide Perovskites toward Electrically Pumped Lasers
Liu, A., Guan, G., Chai, X., Feng, N., Lu, M., Bai, X., & Zhang, Y. (2022) · Laser & Photonics Review · doi:10.1002/lpor.202200189 · Cited by 82
Xing, D., Lin, C., Ho, Y., Kamal, A. S. A., Wang, I., Chen, C., Wen, C., Chen, C., & Delaunay, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202006283 · Cited by 79
Jana, A., Zhumagali, S., Ba, Q., Nissimagoudar, A. S., & Kim, K. S. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta08268a · Cited by 71
Li, M., Yang, D., Huang, X., Zhang, H., Zhao, Y., Yin, B., Pan, Q., Kang, J., Zheng, N., Liu, X., et al. (2022) · Advanced Materials · doi:10.1002/adma.202201413 · Cited by 72
Electrically assisted amplified spontaneous emission in perovskite light-emitting diodes
Elkhouly, K., Goldberg, I., Zhang, X., Annavarapu, N., Hamdad, S., Croes, G., Rolin, C., Genoe, J., Qiu, W., Gehlhaar, R., et al. (2024) · Nature Photonics · doi:10.1038/s41566-023-01341-7 · Cited by 92
Pressing challenges of halide perovskite thin film growth
Soto‐Montero, T., Soltanpoor, W., & Morales‐Masis, M. (2020) · APL Materials · doi:10.1063/5.0027573 · Cited by 75
Tunable Halide Perovskites for Miniaturized Solid‐State Laser Applications
Liao, Q., Jin, X., & Fu, H. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900099 · Cited by 68
Patterning Technologies for Metal Halide Perovskites: A Review
Liang, L., Ma, T., Chen, Z., Wang, J., Hu, J., Ji, Y., Shen, W., & Chen, J. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200419 · Cited by 64
Surface‐Plasmon‐Assisted Metal Halide Perovskite Small Lasers
Li, C., Liu, Z., Shang, Q., & Zhang, Q. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900279 · Cited by 53
Perovskite–Gallium Phosphide Platform for Reconfigurable Visible-Light Nanophotonic Chip
Trofimov, P. I., Pushkarev, A. P., Sinev, I., Fedorov, V. V., Bruyère, S., Bolshakov, A. D., Mukhin, I. S., & Makarov, S. (2020) · ACS Nano · doi:10.1021/acsnano.0c01104 · Cited by 52
Emerging Light‐Emitting Materials for Photonic Integration
Liu, D., Wu, J., Xu, H., & Wang, Z. (2020) · Advanced Materials · doi:10.1002/adma.202003733 · Cited by 56
Multicolor Display Fabricated via Stacking CW Laser-Patterned Perovskite Films
Nie, L., Wang, T., Yu, X., Gao, W., Peng, Q., Xia, Z., Qiu, J., Yu, S. F., & Xu, X. (2023) · ACS Energy Letters · doi:10.1021/acsenergylett.3c00134 · Cited by 48
Metamaterial Enhancement of Metal-Halide Perovskite Luminescence
Adamo, G., Krishnamoorthy, H. N. S., Cortecchia, D., Chaudhary, B., Nalla, V., Zheludev, N. I., & Soci, C. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c02571 · Cited by 44
“A number of approaches have been adopted to overcome the luminescence yield limitation, ranging from micro/nano-structuring of the perovskite materials(8,9,10,11,12,13) to distributed feedback and microring lasing cavities.(14,15,16,17,18,19) Thanks to their ability of trapping, confining and enhancing the optical fie…”
Facet Engineering for Amplified Spontaneous Emission in Metal Halide Perovskite Nanocrystals
Bera, S. K., Bera, S., Shrivastava, M., Pradhan, N. C., & Adarsh, K. V. (2022) · Nano Letters · doi:10.1021/acs.nanolett.2c02982 · Cited by 43
Wang, X.-Z., Jin, L., Sergeev, A. A., Liu, W., Gu, S., Li, N., Fan, K., Chen, S., Wong, K. S., Sun, X., et al. (2023) · Science Advances · doi:10.1126/sciadv.adj3476 · Cited by 55
Advanced Laser Nanofabrication Technologies for Perovskite Photonics
Cherepakhin, A. B., Zhizhchenko, A. Y., Khmelevskaia, D., Logunov, L., Kuchmizhak, A. A., & Makarov, S. (2024) · Advanced Optical Materials · doi:10.1002/adom.202302782 · Cited by 50
Single‐particle perovskite lasers: from material properties to cavity design
Polushkin, A. S., Tiguntseva, E. Y., Pushkarev, A. P., & Makarov, S. (2020) · Nanophotonics · doi:10.1515/nanoph-2019-0443 · Cited by 43
Zhizhchenko, A. Y., Cherepakhin, A. B., Masharin, M. A., Pushkarev, A. P., Kulinich, S. A., Porfirev, A. P., Kuchmizhak, A. A., & Makarov, S. V. (2021) · Laser & Photonics Reviews · doi:10.1002/lpor.202100094 · Cited by 43
Alvarado‐Leaños, A. L., Cortecchia, D., Folpini, G., Kandada, A. R. S., & Petrozza, A. (2021) · Advanced Optical Materials · doi:10.1002/adom.202001773 · Cited by 47
Self-citationLan, S., Peng, Y., Shen, H., Wang, S., Ren, J., Zheng, Z., Liu, W., & Li, D. (2021) · Laser & Photonics Review · doi:10.1002/lpor.202000428 · Cited by 42
Perovskite micro-/nanoarchitecture for photonic applications
Liu, Y., Li, F., & Huang, W. (2023) · Matter · doi:10.1016/j.matt.2023.05.043 · Cited by 41
Liang, M., Lin, W., Lan, Z., Meng, J., Zhao, Q., Zou, X., Castelli, I. E., Pullerits, T., Canton, S. E., & Zheng, K. (2020) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.0c00179 · Cited by 42
High‐Quality CsPbBr 3 Perovskite Films with Modal Gain above 10 000 cm −1 at Room Temperature
Tatarinov, D., Anoshkin, S., Tsibizov, I. A., Шеремет, В. Н., Işık, F., Zhizhchenko, A. Y., Cherepakhin, A. B., Kuchmizhak, A. A., Pushkarev, A. P., Demir, H. V., et al. (2023) · Advanced Optical Materials · doi:10.1002/adom.202202407 · Cited by 41
Mao, W., Li, H., Tang, B., Zhang, C., Liu, L., Wang, P., Dong, H., & Zhang, L. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acf2d0 · Cited by 40
“Consequently, this technique has been applied to perovskite material systems and excellent lasing performances, including low threshold, unidirectionality, and polarization, have been obtained [16, 17].”
MethodZou, C., Zhang, C., Kim, Y., Lin, L. Y., & Luther, J. M. (2021) · ACS Photonics · doi:10.1021/acsphotonics.0c01394 · Cited by 38
Optoelectronic devices based on the integration of halide perovskites with silicon-based materials
Liu, J., Qu, J., Kirchartz, T., & Song, J. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta04527j · Cited by 39
Solution‐Processed Perovskite Quantum Dot Quasi‐BIC Laser from Miniaturized Low‐Lateral‐Loss Cavity
Xing, D., Chen, M., Wang, Z., Deng, C., Ho, Y., Lin, B., Lin, C., Chen, C., & Delaunay, J. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202314953 · Cited by 34
Femtosecond laser direct writing of perovskite patterns with whispering gallery mode lasing
Tian, X., Xu, Y., Zhao, H., Qin, X. B., Nie, Y., Li, W., Liu, S., Lin, Q., & Cao, Q. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc01839b · Cited by 35
Markina, D. I., Pushkarev, A. P., Shishkin, I. I., Эдуардович, К. Ф., Berestennikov, A. S., Pavluchenko, A. S., Smirnova, I. P., Markov, L. K., Vengris, M., Zakhidov, A. A., et al. (2018) · Nanophotonics · doi:10.1515/nanoph-2020-0207 · Cited by 34
Liang, S.-Y., Liu, Y., Zhang, H., Ji, Z., & Xia, H. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c11870 · Cited by 34
Down-converting luminescent optoelectronics and their applications
Kang, C. H., Wang, Y., Alkhazragi, O., Lu, H., Ng, T. K., & Ooi, B. S. (2023) · APL Photonics · doi:10.1063/5.0127552 · Cited by 34
Recent Patterning Methods for Halide Perovskite Nanoparticles
Han, J. W., Hwang, S. H., Seol, M. J., & Kim, S. Y. (2022) · Advanced Optical Materials · doi:10.1002/adom.202200534 · Cited by 32
Single-step direct laser writing of halide perovskite microlasers
Shishkin, I. I., Polushkin, A. S., Tiguntseva, E. Y., Murzin, A. O., Stroganov, B. V., Kapitonov, Y. V., Kulinich, S. A., Kuchmizhak, A. A., & Makarov, S. (2019) · Applied Physics Express · doi:10.7567/1882-0786/ab4b1b · Cited by 30
Room‐Temperature InGaAs Nanowire Array Band‐Edge Lasers on Patterned Silicon‐on‐Insulator Platforms
Kim, H., Lee, W., Chang, T., & Huffaker, D. L. (2018) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.201800489 · Cited by 31
Distributed Feedback Lasers by Thermal Nanoimprint of Perovskites Using Gelatin Gratings
Allegro, I., Bonal, V., Mamleyev, E. R., Villalvilla, J. M., Quintana, J. A., Jin, Q., Díaz‐García, M. A., & Lemmer, U. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c22920 · Cited by 31
Microsteganography on all inorganic perovskite micro-platelets by direct laser writing
Sheng, Y., Liu, C., Yu, L., Yang, Y., Hu, F., Sheng, C., Di, Y., Dong, L., & Gan, Z. (2021) · Nanoscale · doi:10.1039/d1nr02511b · Cited by 33
Integrated Quantum Nanophotonics with Solution‐Processed Materials
Chen, Y., Sharp, D., Saxena, A., Nguyen, H., Cossairt, B. M., & Majumdar, A. (2021) · Advanced Quantum Technologies · doi:10.1002/qute.202100078 · Cited by 26
Toward Thin‐Film Laser Diodes with Metal Halide Perovskites
Goldberg, I., Elkhouly, K., Annavarapu, N., Hamdad, S., Gonzalez, M. C., Genoe, J., Gehlhaar, R., & Heremans, P. L. (2024) · Advanced Materials · doi:10.1002/adma.202314193 · Cited by 28
Safronov, K. R., Popkova, A. A., Markina, D. I., Pushkarev, A. P., Makarov, S., Bessonov, V. O., & Fedyanin, A. A. (2022) · Laser & Photonics Review · doi:10.1002/lpor.202100728 · Cited by 24
Nguyen, D. H., Sun, J., Lo, C., Liu, J., Tsai, W., Li, M., Yang, S., Lin, C., Tzeng, S., Ma, Y., et al. (2021) · Advanced Materials · doi:10.1002/adma.202006819 · Cited by 23
Luminescent metal-halide perovskites: fundamentals, synthesis, and light-emitting devices
Wang, K., Kim, J. H., Yang, J., Liu, X., Dou, Y., Li, Y., Tao, W., Dong, H., Zhu, H., Wu, K., et al. (2024) · Science China Chemistry · doi:10.1007/s11426-024-1986-6 · Cited by 25
Perovskite Microlaser Integration with Metasurface Supporting Topological Waveguiding
Berestennikov, A. S., Kiriushechkina, S., Vakulenko, A., Pushkarev, A. P., Khanikaev, A. B., & Makarov, S. (2023) · ACS Nano · doi:10.1021/acsnano.2c09883 · Cited by 20
Toward temperature-insensitive near-infrared optical gain using low-toxicity Ag 2 Se quantum dots
Liao, C., Tang, L., Li, Y., Sun, S., Wang, L., Xu, J., Jia, Y., & Gu, Z. (2022) · Nanoscale · doi:10.1039/d2nr01145j · Cited by 17
(INVITED) Roadmap on perovskite nanophotonics
Soci, C., Adamo, G., Cortecchia, D., Wang, K., Xiao, S., Song, Q., Schall-Giesecke, A. L., Cegielski, P. J., Lemme, M. C., Gerace, D., et al. (2022) · Optical Materials X · doi:10.1016/j.omx.2022.100214 · Cited by 19
Self-citationDirectional Laser from Solution‐Grown Grating‐Patterned Perovskite Single‐Crystal Microdisks
Zhang, Z., Vogelbacher, F., De, J., Wang, Y., Liao, Q., Tian, Y., Song, Y., & Li, M. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202205636 · Cited by 17
Integrated PbS Colloidal Quantum Dot Photodiodes on Silicon Nitride Waveguides
Pang, C., Deng, Y.-H., Kheradmand, E., Poonkottil, N., Petit, R., Elsinger, L., Detavernier, C., Geiregat, P., Hens, Z., & Van Thourhout, D. (2023) · ACS Photonics · doi:10.1021/acsphotonics.3c00945 · Cited by 16
Quasi-CW Lasing from Directly Patterned and Encapsulated Perovskite Cavity at 260 K
Moon, J., Alahbakhshi, M., Gharajeh, A., Li, Q., Li, Z., Haroldson, R., Kwon, S., Hawkins, R., Kim, M. J., Hu, W. W., et al. (2022) · ACS Photonics · doi:10.1021/acsphotonics.2c00071 · Cited by 19
Lin, H.-C., Lee, Y., Lin, C., Ho, Y., Xing, D., Chen, M., Lin, B., Chen, L., Chen, C., & Delaunay, J. (2022) · Nanoscale · doi:10.1039/d2nr01611g · Cited by 16
He, R., Meunier, M., Dong, Z., Cai, H., Gao, W., Zúñiga-Pérez, J., & Liu, X. (2022) · Nanoscale · doi:10.1039/d2nr05945b · Cited by 15
Four‐Dimensional Design Space of High‐Q Second‐Order Distributed Feedback Perovskite Lasers
Annavarapu, N., Goldberg, I., Hamdad, S., Elkhouly, K., Puybaret, R., Tezcan, D. S., Genoe, J., Gehlhaar, R., & Heremans, P. L. (2024) · Advanced Optical Materials · doi:10.1002/adom.202302496 · Cited by 12
Recent progress in single crystal perovskite X-ray detectors
Liu, X., Ren, J., Chen, Y.-A., Geng, X., Xie, D., & Ren, T. (2024) · Science China Information Sciences · doi:10.1007/s11432-023-3856-4 · Cited by 14
Solution‐Processed Perovskite Microdisk for Coherent Light Emission
Li, X., Zhang, X., Li, H., Liu, T., Zhao, D., Liang, C., Xing, G., & Tang, Z. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900678 · Cited by 13
Silicon‐Integrated Perovskite Photonic Laser Based on Bound States in Continuum
Gu, Z., Gu, H., Zhang, N., Jiang, S., Wang, G., Mao, Y., Liao, J., Yang, S., Liang, C., & Xing, G. (2025) · Laser & Photonics Review · doi:10.1002/lpor.202401327 · Cited by 13
Lasing in Si3N4-organic hybrid (SiNOH) waveguides
Kohler, D., Allegro, I., Wondimu, S. F., Hahn, L., Freude, W., & Koos, C. G. (2020) · Optics Express · doi:10.1364/oe.381572 · Cited by 12
Kamal, A. S. A., Lin, C., Xing, D., Lee, Y., Wang, Z., Chen, M., Ho, Y., Chen, C., & Delaunay, J. (2021) · Nanoscale · doi:10.1039/d1nr04543a · Cited by 13
A novel metamaterial gain-waveguide nanolaser
Awad, E. S. (2021) · Optics & Laser Technology · doi:10.1016/j.optlastec.2021.107202 · Cited by 10
Low-threshold lasing from colloidal quantum dots under quasi-continuous-wave excitation
Hahm, D., Kim, C., Dang, T. H., Pinchetti, V., Livache, C., & Klimov, V. I. (2025) · Nature Photonics · doi:10.1038/s41566-025-01807-w · Cited by 15
“6 and Supple mentary Note 7.”
InfluentialBhowmik, K. K., & Zhao, L. (2024) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.3c01840 · Cited by 11
Emerging Intelligent Manufacturing of Metal Halide Perovskites
Zhang, Y., Chen, T., Yi, S., Zhang, X., Jiao, Y., Lü, J., & Zhao, J. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200275 · Cited by 12
Coherent Hopping Transport and Giant Negative Magnetoresistance in Epitaxial CsSnBr3
Zhang, L., King, I., Nasyedkin, K., et al. (2021) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.1c00409 · Cited by 10
Emission Control in Metal Halide Perovskite Lasers
Wang, K., Huang, C., Ruan, Q., Zhou, Y., Chen, Y., Liu, H., Xiao, S., & Song, Q. (2023) · ACS Photonics · doi:10.1021/acsphotonics.2c01658 · Cited by 9
Concrete perovskites for fabricating high-quality micro-laser arrays
Zhang, H., Chen, T., & Fu, H. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc03988h · Cited by 9
Structural and spectroscopic studies of a nanostructured silicon–perovskite interface
González-Rodríguez, R., da Costa, V. C. P., Delport, G., Frohna, K., Hoye, R. L. Z., Stranks, S. D., & Coffer, J. L. (2020) · Nanoscale · doi:10.1039/c9nr09622a · Cited by 9
Electrically pumped surface-emitting amplified spontaneous emission from colloidal quantum dots
Tian, F., Zhou, T., Zhang, X., Chen, R., & Chen, S. (2025) · Light Science & Applications · doi:10.1038/s41377-025-01972-1 · Cited by 13
“…such as organic molecules 1,2 , perovskites 3 – 5 , and colloidal quantum dots (QDs) 6 – 11 have long been pursued due to their advantages of simple fabrication, low cost and high compatibility with various substrates, making them easy to integrate with on-chip photonics and electronics 12,13 .”
Zhang, Y., Dong, Z., Guo, X., et al. (2024) · Optics Express · doi:10.1364/oe.525735 · Cited by 8
Klenovský, P., Valdhans, J., Krejčí, L., Valtr, M., Klapetek, P., & Fedotova, O. M. (2022) · Electronic Structure · doi:10.1088/2516-1075/ac5b7e · Cited by 8
Ma, Q., Bao, H., Zhang, G., et al. (2022) · IEEE photonics journal · doi:10.1109/jphot.2022.3224059 · Cited by 8
“A S TRADITIONAL chips reach their computing bottleneck, alternative new photonic chips have received much attention due to their high computing efficiency [1], [2], [3], [4], [5], [6], [7].”
BackgroundWang, W., Liu, S., Gu, Z., et al. (2020) · Physical Review A · doi:10.1103/physreva.101.013833 · Cited by 8
Ultralow-threshold quasi-CW lasing from FAPbBr3 perovskite first-order DFB laser
Chang, C., & Lin, L. Y. (2023) · Nanotechnology · doi:10.1088/1361-6528/acb5fb · Cited by 7
“In our case, the ASE threshold was very close to the lasing threshold and thus aggravated the effect [20].”
Complex optical constants of CsPbCl3 perovskite thin films determined by spectroscopic ellipsometry
Khan, S. M., Cegielski, P. J., Runkel, M., Riedl, T., Mohammadi, M., & Lemme, M. C. (2025) · APL Energy · doi:10.1063/5.0268298 · Cited by 5
Self-citationAnnavarapu, N., Goldberg, I., Papadopoulou, A., et al. (2023) · ACS Photonics · doi:10.1021/acsphotonics.3c00204 · Cited by 5
Integrated, ultrafast all-optical polariton transistors with sub-wavelength grating microcavities
Tassan, P., Urbonas, D., Chmielak, B., Bolten, J., Wahlbrink, T., Lemme, M. C., Förster, M., Scherf, U., Mahrt, R. F., & Stöferle, T. (2026) · Light Science & Applications · doi:10.1038/s41377-025-02050-2 · Cited by 15
“Hence, from the time scale of the initial fast drop, the maximum repetition rate of the devices can be inferred, and the height of the long tail versus the initial peak gives a limit for the extinction.”
Self-citationA Versatile Top-Down Patterning Technique for Perovskite On-Chip Integration
Fabrizi, F., Goudarzi, S., Khan, S., Mohammad, T., Starodubtceva, L., Cegielski, P. J., Thiel, F., Özen, S., Schiffer, M., Lang, F., et al. (2025) · ACS Nano · doi:10.1021/acsnano.5c10397 · Cited by 10
“Motivated by earlier works on perovskite-compatible photo-lithography methods, 28,39,58 we devised a new strategy that integrates two resists and nonoxidative reactive gases into a singular workflow.”
InfluentialSelf-citationHe, Y., Wong, E. L., Sarsembek, N., et al. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.5c13296 · Cited by 4
Self-citationScalable Synthesis of CsPbX3 Quantum Dot–Organic Hybrid Microrings for Low Threshold Lasing
Ding, Y., Zhang, H., & Fu, H. (2025) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5c01111 · Cited by 3
Room-Temperature Nanosecond Amplified Spontaneous Emission from Tin Iodide Perovskite Nanostructures
Manoli, A., Athanasiou, M., Papagiorgis, P. G., Gahlot, K., Proteşescu, L., & Itskos, G. (2025) · ACS Photonics · doi:10.1021/acsphotonics.5c01400 · Cited by 3
Nanowire Lasing With SiN Microring Resonator
Yi, R., Zhang, X., Shi, Z., Wei, X., Shui, L., Zhang, P., Wang, J., Yuan, X., Qu, J., Zhang, X., et al. (2026) · Laser & Photonics Review · doi:10.1002/lpor.202502465 · Cited by 2
“To achieve in-plane output, a single-mode bus-waveguide was placed parallel to the straight section of the microring-assisted NW laser, forming a side-coupled configuration [ 35 ].”
Wu, C.-S. J., Wong, E. L., Li, H., Jiménez‐López, J., Lin, C., Hsu, H., & Petrozza, A. (2026) · Advanced Materials · doi:10.1002/adma.202516903 · Cited by 2
“[5] This flexibility enables the possibility of integration with existing photonic platforms, which in turn leads to the miniaturization and adaptation of thin film laser technology into everyday electronics, wearable electronics [6], and integrated photonic circuits [7].”
Self-citationAcharjee, D., Mahato, A. B., Ghosh, S., & Ghosh, S. (2026) · Small · doi:10.1002/smll.202514963 · Cited by 2
Directional Laser from Solution‐Grown Grating‐Patterned Perovskite Single‐Crystal Microdisks
Zhang, Z., Vogelbacher, F., De, J., Wang, Y., Liao, Q., Tian, Y., Song, Y., & Li, M. (2022) · Angewandte Chemie · doi:10.1002/ange.202205636 · Cited by 2
High-Performance UV–Visible Broad Spectral Phototransistors Based on CuPc/Cs3Bi2I9 Heterojunction
Wang, Y., Jiang, B., Zhao, X., et al. (2024) · Coatings · doi:10.3390/coatings14080966 · Cited by 2
Microcavities integrated in metal halide perovskite light-emitting field-effect transistors
Scotognella, F. (2022) · Results in Physics · doi:10.1016/j.rinp.2022.106168 · Cited by 2
Tsarev, S. A., Wu, E., Cho, K., Liu, X., Lung, Q. N. D., Hartman, E., Sun, T. S., Türedi, B., Matt, G. J., Frick, S., et al. (2026) · Advanced Materials · doi:10.1002/adma.202523002 · Cited by 1
“Lift-off methods have also been widely explored for patterning perovskite films [25–27].”
ZnO-based active integrated photonic devices for the ultraviolet band
Meng, B., Wang, X., Chen, R., & Su, L. (2026) · Applied Physics Letters · doi:10.1063/5.0333770 · Cited by 1
Metadata
- Authors
- Cegielski, P. J., Giesecke, A. L., Neutzner, S., Porschatis, C., Gandini, M., Schall, D., Perini, C. A. R., Bolten, J., Suckow, S., Kataria, S., Chmielak, B., Wahlbrink, T., Petrozza, A., & Lemme, M. C.
- Affiliations
- AMO (Germany) (DE)
- Italian Institute of Technology (IT)
- RWTH Aachen University (DE)
- Corresponding author
- Giesecke, Anna Lena
- ORCID
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-10-02
- Volume
- 18
- Issue
- 11
- Pages
- 6915-6923
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2895106145
- Cited by
- 132
- References
- 50
- Citations by year
- 2026: 11 · 2025: 13 · 2024: 16 · 2023: 21 · 2022: 22 · 2021: 19 · 2020: 16 · 2019: 12 · 2018: 2
- FWCI
- 4.69
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Nano Letters (publishedVersion, other-oa)
- PubMed (publishedVersion)
- arXiv (Cornell University) (submittedVersion)
- RWTH Publications (RWTH Aachen) (submittedVersion, other-oa)
- Zenodo (CERN European Organization for Nuclear Research) (submittedVersion, other-oa)
- arXiv (Cornell University)
- Funders
- H2020 Excellent Science (688166)
- H2020 Marie Sklodowska-Curie Actions (643238)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor Lasers and Optical Devices
- Keywords
- monolithic integration, silicon photonics, methylammonium lead iodide, photolithography, lasing threshold, back-end-of-line integration, hybrid integration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-12, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-12 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.