Monolithically Integrated Perovskite Semiconductor Lasers on Silicon Photonic Chips by Scalable Top-Down Fabrication
Open accessThe DOI matches its Crossref record; 49 of the 50 references it cites were found in a registry or an index; 5 of the 16 sources its claims cite were checked for support.
Abstract
High Resolution Image Download MS PowerPoint Slide Metal-halide perovskites are promising lasing materials for the realization of monolithically integrated laser sources, the key components of silicon photonic integrated circuits (PICs). Perovskites can be deposited from solution and require only low-temperature processing, leading to significant cost reduction and enabling new PIC architectures compared to state-of-the-art lasers realized through the costly and inefficient hybrid integration of III−V semiconductors. Until now, however, due to the chemical sensitivity of perovskites, no microfabrication process based on optical lithography (and, therefore, on existing semiconductor manufacturing infrastructure) has been established. Here, the first methylammonium lead iodide perovskite microdisc lasers monolithically integrated into silicon nitride PICs by such a top-down process are presented. The lasers show a record low lasing threshold of 4.7 μJcm –2 at room temperature for monolithically integrated lasers, which are complementary metal–oxide–semiconductor compatible and can be integrated in the back-end-of-line processes.
Overview
CoChat Summary
TL;DR
The paper reports MAPbI3 perovskite micro-disc lasers monolithically integrated into silicon nitride photonic integrated circuits using a scalable top-down optical lithography and ICP RIE process. The lasers show a record low room-temperature lasing threshold of 4.7 µJ cm⁻² for monolithically integrated CMOS-compatible lasers, with reproducibility across 83 devices on 4 PICs.
Key findings
- MAPbI3 micro-disc lasers coupled to Si3N4 bus waveguides lased at room temperature under optical pumping, with thresholds of 7.1 µJ cm⁻², 4.7 µJ cm⁻², and 7.1 µJ cm⁻² for radii of 4.3 µm, 6 µm, and 8.3 µm, respectively; emission saturated at 18, 11, and 19 µJ cm⁻².
- The best lasing peak had a FWHM of 1.1 nm and Q = 709; scattering losses were estimated at 27.7 dB/cm due to perovskite roughness.
- 83 tested devices on 4 different PICs showed comparable lasing thresholds and spectral characteristics; FSR was inversely proportional to disc diameter, but measured FSRs exceeded calculated values by up to 52%, attributed to chlorine intake at etched edges.
- A polycrystalline FDTD model using random grains of 50–200 nm reproduced measured behavior: simulated roundtrip transmission was 0.56 versus 0.44 extracted from a 4.3 µm disc with Q = 650.
Methods
- Fabrication: 6-inch Si wafers with 2.2 µm thermal SiO2, 250 nm LPCVD Si3N4 waveguides, LTO SiO2 planarization; MAPbI3 deposited by spin-coating from 1 M MAI/PbI2/DMSO in DMF with chlorobenzene drip and two-step annealing (45 °C, 5 min + 100 °C, 10 min); patterned by double-layer resist optical contact lithography and single-step Cl2/CF4 ICP RIE; 1 µm PMMA cladding.
- Characterization: SEM, XRD, EDX, and PL mapping; optical pumping with 120 fs pulses at 630 nm and 250 kHz at room temperature in ambient conditions; output collected from the Si3N4 bus waveguide edge 5 mm away, passed through a polarizer, and recorded with a 0.4 nm resolution spectrometer.
- Simulations: analytical WGM model and Lumerical FDTD for directional coupler optimization, including a model with randomly generated crystal grains to represent polycrystalline MAPbI3 morphology.
Limitations
- Stated: the lithographic tool could not achieve the optimal 150 nm bus waveguide offset and 50 nm gap, so disc positions were varied in 250 nm steps over ±1.25 µm to ensure at least one nearly optimal structure.
- Stated: perovskite chemical reactivity and instability remain barriers to established semiconductor fabrication; devices were protected only by 1 µm PMMA, and commercial reliability would require hermetic packaging, moisture barriers, and stability/degradation studies.
- Evident: lasing is optically pumped, not electrically pumped; the paper notes that electrically pumped lasers will require efficient carrier injection. The low Q (709) and high scattering losses, measured-versus-calculated FSR discrepancy up to 52%, and FSR standard deviation of 1.3 nm within a sample all indicate performance limits tied to perovskite roughness and polycrystalline morphology.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
4 Valid · 1 Not valid · 9 Not checked · 40 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“The refractive index is coupled to the absorption through the Kramers-Kronig relation:”
What the sources say
- Supportedcites [40] Price, 2015, Nat. Commun. source
In Results, under “Photoinduced reflection due to refractive index changes,” the paper says it obtains a change in absorption coefficient and subsequently a change in refractive index through a Kramers–Kronig transformation. This directly supports the stated coupling. (LLM, conf=0.94)
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“and is the record value for monolithicaly integrated CMOS compatible lasers. 42”
What the sources say
- Could not verifycites [42] Xie, 2017, Adv. Mater. sourceExperimental — accuracy not yet measured
The device characterization (p. 6) reports linewidth narrowing from 0.58 nm to 0.14 nm, and the fabrication description (p. 3) calls the process CMOS-like. Our copy does not compare that linewidth with other monolithically integrated CMOS-compatible lasers or identify any linewidth as a record (searched: linewidth, record, and CMOS-compatible integrated lasers). (LLM, conf=0.75)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The FWHM of the single lasing peak just above the threshold was 1.1 nm”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“gradually increased to 4 nm at the excitation of ~10 µ Jcm -2”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Here, the first methylammonium lead iodide perovskite micro-disc lasers monolithically integrated into silicon nitride PICs by such a top-down process is presented.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
29 more claims
Create a free account to see all 54 claims and every source verdict.
- It may state two separate claims as one. 15
- Probably not a substantial claim. 4
- The quote only partly states this claim. 1
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Self-citationLead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
Schawlow, A. L., & Townes, C. H. (1958) · Physical Review · doi:10.1103/physrev.112.1940 · Cited by 2,354
Deschler, F., Price, M., Pathak, S., Klintberg, L. E., Jarausch, D.-D., Higler, R., Hüttner, S., Leijtens, T., Stranks, S. D., Snaith, H. J., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5005285 · Cited by 1,753
Lasing in direct-bandgap GeSn alloy grown on Si
Wirths, S., Geiger, R., von den Driesch, N., Mussler, G., Stoica, T., Mantl, S., Ikonic, Z., Luysberg, M., Chiussi, S., Hartmann, J. M., et al. (2015) · Nature Photonics · doi:10.1038/nphoton.2014.321 · Cited by 1,255
Electrically pumped continuous-wave III–V quantum dot lasers on silicon
Chen, S., Li, W., Wu, J., Jiang, Q., Tang, M., Shutts, S., Elliott, S. N., Sobiesierski, A., Seeds, A. J., Ross, I., et al. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.21 · Cited by 877
Price, M. B., Butkus, J., Jellicoe, T. C., Sadhanala, A., Briane, A., Halpert, J. E., Broch, K., Hodgkiss, J. M., Friend, R. H., & Deschler, F. (2015) · Nature Communications · doi:10.1038/ncomms9420 · Cited by 704
Optical Cavity Effects in ZnO Nanowire Lasers and Waveguides
Johnson, J. C., Yan, H., Yang, P., & Saykally, R. J. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp034482n · Cited by 630
Ambipolar solution-processed hybrid perovskite phototransistors
Li, F., Ma, C., Wang, H., Hu, W., Yu, W., Sheikh, A. D., & Wu, T. (2015) · Nature Communications · doi:10.1038/ncomms9238 · Cited by 629
Tuning the Light Emission Properties by Band Gap Engineering in Hybrid Lead Halide Perovskite
D’Innocenzo, V., Srimath Kandada, A. R., De Bastiani, M., Gandini, M., & Petrozza, A. (2014) · Journal of the American Chemical Society · doi:10.1021/ja511198f · Cited by 623
Self-citationCorrelated electron–hole plasma in organometal perovskites
Saba, M., Cadelano, M., Marongiu, D., Chen, F., Sarritzu, V., Sestu, N., Figus, C., Aresti, M., Piras, R., Geddo Lehmann, A., et al. (2014) · Nature Communications · doi:10.1038/ncomms6049 · Cited by 603
Löper, P., Stuckelberger, M., Niesen, B., Werner, J., Filipič, M., Moon, S.-J., Yum, J.-H., Topič, M., De Wolf, S., & Ballif, C. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502471h · Cited by 587
Optical properties and limiting photocurrent of thin-film perovskite solar cells
Ball, J. M., Stranks, S. D., Hörantner, M. T., Hüttner, S., Zhang, W., Crossland, E. J. W., Ramirez, I., Riede, M., Johnston, M. B., Friend, R. H., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03224a · Cited by 528
Continuous-wave lasing in an organic–inorganic lead halide perovskite semiconductor
Jia, Y., Kerner, R. A., Grede, A. J., Rand, B. P., & Giebink, N. C. (2017) · Nature Photonics · doi:10.1038/s41566-017-0047-6 · Cited by 442
Perovskite Microdisk Microlasers Self‐Assembled from Solution
Liao, Q., Hu, K., Zhang, H., Wang, X., Yao, J., & Fu, H. (2015) · Advanced Materials · doi:10.1002/adma.201500449 · Cited by 406
On-chip gas detection in silicon optical microcavities
Robinson, J. T., Chen, L., & Lipson, M. (2008) · Optics Express · doi:10.1364/oe.16.004296 · Cited by 342
Yamada, Y., Nakamura, T., Endo, M., Wakamiya, A., & Kanemitsu, Y. (2014) · Applied Physics Express · doi:10.7567/apex.7.032302 · Cited by 303
Organic–Inorganic Hybrid Perovskite Nanowire Laser Arrays
Liu, P., He, X., Ren, J., Liao, Q., Yao, J., & Fu, H. (2017) · ACS Nano · doi:10.1021/acsnano.7b01351 · Cited by 298
Structured Organic–Inorganic Perovskite toward a Distributed Feedback Laser
Saliba, M., Wood, S. M., Patel, J. B., Nayak, P. K., Huang, J., Alexander‐Webber, J. A., Wenger, B., Stranks, S. D., Hörantner, M. T., Wang, J. T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201502608 · Cited by 297
Samuel, I. D. W., Namdas, E. B., & Turnbull, G. A. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.173 · Cited by 284
Pourdavoud, N., Wang, S., Mayer, A., Hu, T., Chen, Y., Marianovich, A., Kowalsky, W., Heiderhoff, R., Scheer, H., & Riedl, T. (2017) · Advanced Materials · doi:10.1002/adma.201605003 · Cited by 236
Nanoimprinted Perovskite Nanograting Photodetector with Improved Efficiency
Wang, H., Haroldson, R., Balachandran, B., Zakhidov, A., Sohal, S., Chan, J. Y., Zakhidov, A., & Hu, W. (2016) · ACS Nano · doi:10.1021/acsnano.6b05535 · Cited by 218
Novel Light Source Integration Approaches for Silicon Photonics
Wang, Z., Abbasi, A., Dave, U., De Groote, A., Kumari, S., Kunert, B., Merckling, C., Pantouvaki, M., Shi, Y., Tian, B., et al. (2017) · Laser & Photonics Reviews · doi:10.1002/lpor.201700063 · Cited by 213
High-performance perovskite light-emitting diodes via morphological control of perovskite films
Yu, J. C., Kim, D. B., Jung, E. D., Lee, B. R., & Song, M. H. (2016) · Nanoscale · doi:10.1039/c5nr05604g · Cited by 191
Highly Reproducible Organometallic Halide Perovskite Microdevices based on Top‐Down Lithography
Zhang, N., Sun, W., Rodrigues, S. P., Wang, K., Gu, Z., Wang, S., Cai, W., Xiao, S., & Song, Q. (2017) · Advanced Materials · doi:10.1002/adma.201606205 · Cited by 176
Stability in Perovskite Photovoltaics: A Paradigm for Newfangled Technologies
Christians, J. A., Habisreutinger, S. N., Berry, J. J., & Luther, J. M. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00914 · Cited by 156
Saidi, W. A., Poncé, S., & Monserrat, B. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02560 · Cited by 143
Optical constants of CH_3NH_3PbBr_3 perovskite thin films measured by spectroscopic ellipsometry
Alias, M. S., Dursun, I., Saidaminov, M. I., Diallo, E. M., Mishra, P., Ng, T. K., Bakr, O. M., & Ooi, B. S. (2016) · Optics Express · doi:10.1364/oe.24.016586 · Cited by 135
Post-synthetic halide conversion and selective halogen capture in hybrid perovskites
Solis-Ibarra, D., Smith, I. C., & Karunadasa, H. I. (2015) · Chemical Science · doi:10.1039/c5sc01135c · Cited by 127
Photophysics of Hybrid Lead Halide Perovskites: The Role of Microstructure
Srimath Kandada, A. R., & Petrozza, A. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00464 · Cited by 120
Self-citationZhang, L., Ju, M., & Liang, W. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp01994c · Cited by 115
On‐Chip Integrated Quantum‐Dot–Silicon‐Nitride Microdisk Lasers
Xie, W., Stöferle, T., Rainò, G., Aubert, T., Bisschop, S., Zhu, Y., Mahrt, R. F., Geiregat, P., Brainis, E., Hens, Z., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604866 · Cited by 107
Maximizing the optical performance of planar CH3NH3PbI3 hybrid perovskite heterojunction stacks
Phillips, L. J., Rashed, A. M., Treharne, R. E., Kay, J., Yates, P. J., Mitrović, I. Z., Weerakkody, A. D., Hall, S., & Durose, K. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.10.007 · Cited by 91
Can Trihalide Lead Perovskites Support Continuous Wave Lasing?
Cadelano, M., Sarritzu, V., Sestu, N., Marongiu, D., Chen, F., Piras, R., Corpino, R., Carbonaro, C. M., Quochi, F., Saba, M., et al. (2015) · Advanced Optical Materials · doi:10.1002/adom.201500229 · Cited by 82
Marris-Morini, D., Baudot, C., Fédéli, J.-M., Rasigade, G., Vulliet, N., Souhaité, A., Ziebell, M., Rivallin, P., Olivier, S., Crozat, P., et al. (2013) · Optics Express · doi:10.1364/oe.21.022471 · Cited by 81
Alias, M. S., Dursun, I., Shi, D., Saidaminov, M. I., Diallo, E. M., Priante, D., Ng, T. K., Bakr, O. M., & Ooi, B. S. (2015) · Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena · doi:10.1116/1.4927542 · Cited by 69
Cegielski, P. J., Neutzner, S., Porschatis, C., Lerch, H., Bolten, J., Suckow, S., Kandada, A. R. S., Chmielak, B., Petrozza, A., Wahlbrink, T., et al. (2017) · Optics Express · doi:10.1364/oe.25.013199 · Cited by 67
Self-citationHybrid Integration of the Wavelength-Tunable Laser With a Silicon Photonic Integrated Circuit
Snyder, B., Corbett, B., & O'Brien, P. (2013) · Journal of Lightwave Technology · doi:10.1109/jlt.2013.2276740 · Cited by 61
Band-gap renormalization in highly excited GaN
Nagai, T., Inagaki, T. J., & Kanemitsu, Y. (2004) · Applied Physics Letters · doi:10.1063/1.1650552 · Cited by 50
Degradation model analysis of laser diodes
Häusler, K., Zeimer, U., Sumpf, B., et al. (2008) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-007-9534-8 · Cited by 46
Hoffmann, L., Theirich, D., Schlamm, D., et al. (2017) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.5006781 · Cited by 44
Triple cation mixed-halide perovskites for tunable lasers
Brenner, P., Glöckler, T., Rueda-Delgado, D., Abzieher, T., Jakoby, M., Richards, B. S., Paetzold, U. W., Howard, I. A., & Lemmer, U. (2017) · Optical Materials Express · doi:10.1364/ome.7.004082 · Cited by 42
Continuous-wave optically pumped green perovskite vertical-cavity surface-emitter
Alias, M. S., Liu, Z., Al-atawi, A., Ng, T. K., Wu, T., & Ooi, B. S. (2017) · Optics Letters · doi:10.1364/ol.42.003618 · Cited by 36
Vertical‐Cavity Silicon‐Integrated Laser with In‐Plane Waveguide Emission at 850 nm
Kumari, S., Haglund, E. P., Gustavsson, J. S., Larsson, A. G., Roelkens, G., & Baets, R. (2018) · Laser & Photonics Review · doi:10.1002/lpor.201700206 · Cited by 32
Zhang, H., Liao, Q., Wang, X., Hu, K., Yao, J., & Fu, H. (2016) · Small · doi:10.1002/smll.201601201 · Cited by 29
Geidel, S., Peransi Llopis, S., Rodrigo, M., De Diego-Castilla, G., Sousa, A., Nestler, J., Otto, T., Gessner, T., & Parro, V. (2016) · Micromachines · doi:10.3390/mi7090153 · Cited by 26
Efremov, A. M., Kim, D., & Kim, C.-I. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2004.08.023 · Cited by 16
Analyses of whispering-gallery modes in small resonators
Quan, H., & Guo, Z. (2009) · Journal of Micro/Nanopatterning Materials and Metrology · doi:10.1117/1.3213247 · Cited by 14
Towards electro-optical integration of hybrid III-V on Si lasers into the BEOL of a CMOS technology
Hahn, H., Seifried, M., Villares, G., Baumgartner, Y., Halter, M., Caer, C., Caimi, D., Sousa, M., Dangel, R., Meier, N., et al. (2017) · 2017 75th Annual Device Research Conference (DRC) · doi:10.1109/drc.2017.7999518 · Cited by 5
Cited by
Park, Y.-S., Roh, J., Diroll, B. T., Schaller, R. D., & Klimov, V. I. (2021) · Nature Reviews Materials · doi:10.1038/s41578-020-00274-9 · Cited by 421
Halide Perovskite Semiconductor Lasers: Materials, Cavity Design, and Low Threshold
Zhang, Q., Shang, Q., Su, R., Do, T. T. H., & Xiong, Q. (2021) · Nano Letters · doi:10.1021/acs.nanolett.0c03593 · Cited by 417
Metal Halide Perovskites for Laser Applications
Lei, L., Dong, Q., Gundogdu, K., & So, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010144 · Cited by 378
Pourdavoud, N., Haeger, T., Mayer, A., Cegielski, P. J., Giesecke, A. L., Heiderhoff, R., Olthof, S., Zaefferer, S., Shutsko, I., Henkel, A., et al. (2019) · Advanced Materials · doi:10.1002/adma.201903717 · Cited by 208
Self-citationSingle-Mode Lasing from Imprinted Halide-Perovskite Microdisks
Zhizhchenko, A., Syubaev, S., Berestennikov, A., Yulin, A. V., Porfirev, A., Pushkarev, A., Shishkin, I., Golokhvast, K., Bogdanov, A. A., Zakhidov, A. A., et al. (2019) · ACS Nano · doi:10.1021/acsnano.8b08948 · Cited by 187
Metadata
- Authors
- Cegielski, P. J., Giesecke, A. L., Neutzner, S., Porschatis, C., Gandini, M., Schall, D., Perini, C. A. R., Bolten, J., Suckow, S., Kataria, S., Chmielak, B., Wahlbrink, T., Petrozza, A., & Lemme, M. C.
- Affiliations
- AMO (Germany) (DE)
- Italian Institute of Technology (IT)
- RWTH Aachen University (DE)
- Corresponding author
- Giesecke, Anna Lena
- ORCID
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-10-02
- Volume
- 18
- Issue
- 11
- Pages
- 6915-6923
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2895106145
- Cited by
- 132
- References
- 50
- Citations by year
- 2026: 11 · 2025: 13 · 2024: 16 · 2023: 21 · 2022: 22 · 2021: 19 · 2020: 16 · 2019: 12 · 2018: 2
- FWCI
- 4.69
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Nano Letters (publishedVersion, other-oa)
- PubMed (publishedVersion)
- arXiv (Cornell University) (submittedVersion)
- RWTH Publications (RWTH Aachen) (submittedVersion, other-oa)
- Zenodo (CERN European Organization for Nuclear Research) (submittedVersion, other-oa)
- arXiv (Cornell University)
- Funders
- H2020 Excellent Science (688166)
- H2020 Marie Sklodowska-Curie Actions (643238)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor Lasers and Optical Devices
- Keywords
- monolithic integration, silicon photonics, methylammonium lead iodide, photolithography, lasing threshold, back-end-of-line integration, hybrid integration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-12, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-12 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.