CoChat

Particle Size Effect on Platinum Dissolution: Practical Considerations for Fuel Cells

Sandbeck, Daniel J. S., Inaba, Masanori, Quinson, Jonathan, Bucher, Jan, Zana, Alessandro, Arenz, Matthias, Cherevko, Serhiy · 2020 · ACS Applied Materials & Interfaces
Cited by 89

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Abstract

The high costs of polymer membrane electrolyte fuel cells (PEMFCs) remain a roadblock for a competitive market with combustion engine vehicles. The PEMFC costs can be reduced by decreasing the size of Pt nanoparticles in the catalyst layer, thereby increasing the Pt dispersion and utilization. Furthermore, high-power performance loss due to O 2 transport resistance is alleviated by decreasing the particle size and increasing dispersion. However, firm conclusions on how Pt particle size impacts durability remain elusive due to synthetic difficulties in exclusively varying single parameters (e.g., particle size and loading). Therefore, here the particle size of Pt nanoparticles was varied from 2.0 to 2.8 and 3.7 nm while keeping the loading constant (30 wt %) on a Vulcan support using the two-step surfactant-free toolbox method. By studying the electrochemical dissolution in situ using online inductively coupled plasma mass spectrometry (online ICP-MS), mass-specific dissolution trends are revealed and are attributed to particle-size-dependent changes in electrochemically active surface area. Such degradation trends are critical for the start/stop of PEMFCs and currently require the implementation of potential control systems in consumer vehicles. Additionally, shifts in the onset of anodic dissolution and also oxidation to more negative potentials with decreasing particle size were observed. These results indicate a similar mechanism of anodic dissolution related to place-exchange when moving from extended polycrystalline Pt to nanoparticle scales. The negative shifts in the onset as the particle size decreases highlight a practical limitation for PEMFCs during load/idle conditions: without further material improvements, which inhibit Pt dissolution, reduction in costs and improvement in high-power performance via increased Pt utilization and dispersion will not be possible by decreasing particle sizes further.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acsami.0c02801

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 89

Metadata

Authors
Sandbeck, D. J. S., Inaba, M., Quinson, J., Bucher, J., Zana, A., Arenz, M., & Cherevko, S.
Venue
ACS Applied Materials & Interfaces
Published
2020-05-12
Volume
12
Issue
23
Pages
25718-25727
ISSN
  • 1944-8244 (ISSN-L)
  • 1944-8252
OpenAlex
W3024908133
Cited by
89
References
7
FWCI
3.80
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.