CoChat

Iron–Cobalt Nanoparticles Embedded in B,N-Doped Chitosan-Derived Porous Carbon Aerogel for Overall Water Splitting

Sam, Daniel Kobina, Cao, Yan · 2024 · ACS Applied Materials & Interfaces

The DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index; 8 of the 32 sources its claims cite were checked for support.

Abstract

Given their intriguing properties, porous carbons have surfaced as promising electrocatalysts for various energy conversion reactions. This study presents a unique approach where iron–cobalt (FeCo) is confined in a boron, nitrogen-doped chitosan-derived porous carbon aerogel (BNPC-FeCo) to serve as an electrocatalyst for the hydrogen evolution and oxygen evolution reactions (HER and OER). The BNPC-FeCo-900 electrocatalyst demonstrates excellent catalyst activity, with very low overpotentials of 186 and 320 mV at 10 mA cm –2, low Tafel slopes of 82 and 55 mV dec –1, and low charge transfer resistance of 2.68 and 9.25 Ω for HER and OER, respectively. Density functional theory (DFT) calculations further reveal that the cooperation between the boron, nitrogen codoped porous carbon, and the FeCo nanoparticles reduces intermediates’ energy barriers, significantly enhancing the HER and OER performance. In conclusion, this work offers significant and informative perspectives into the potential of porous carbon materials as dual-purpose electrocatalysts for water splitting.

Overview

CoChat Summary

TL;DR

The paper reports FeCo nanoparticles embedded in a B,N-doped chitosan-derived porous carbon aerogel (BNPC-FeCo-900) as a bifunctional electrocatalyst for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). It shows low overpotentials, good stability, and DFT support for enhanced HER/OER activity from the porous carbon–FeCo cooperation.

Key findings

  • BNPC-FeCo-900 required overpotentials of 186 mV for HER and 320 mV for OER at 10 mA cm−2, with Tafel slopes of 82 mV dec−1 for HER and 51 mV dec−1 for OER in the Results (the abstract states 55 mV dec−1 for OER), and charge-transfer resistances of 2.68 Ω for HER and 9.25 Ω for OER.
  • In a two-electrode cell using BNPC-FeCo-900/CC as both anode and cathode, cell voltages of 1.76 V and 1.95 V delivered 20 and 100 mA cm−2, respectively; it sustained 20 mA cm−2 for 12 h, with Faradaic efficiencies of 97–100% for HER and 96–100% for OER.
  • DFT attributed HER activity to a pyridinic-N site in the BN-paired model with |ΔGH*| = 0.39 eV; for OER, *OOH formation was the rate-determining step on C sites, with ΔG3 values of 2.16, 1.93, and 1.27 eV for (BN)-BC1, (BN)-BC2, and (BN)-NC, respectively.
  • BNPC-FeCo-900 showed the highest HER and OER mass activities of 24.90 and 177.37 A g−1, and TOF values of 0.031 H2 s−1 for HER at 250 mV and 0.109 O2 s−1 for OER.

Methods

  • Synthesis: chitosan, dicyandiamide, urea, boric acid, Co(NO3)2·6H2O, and Fe(NO3)3·6H2O were dissolved in 2% acetic acid (Co:Fe molar ratio 2:1), freeze-dried, and pyrolyzed under Ar at 600–1000 °C for 3 h; controls included metal-free BNPC-900 and reduced-metal BNPC-FeCo-900-90/99.
  • Characterization: XRD, SEM/TEM/HRTEM, EDX, Raman, FT-IR, XPS, N2 adsorption–desorption, and ICP-MS.
  • Electrochemistry: three-electrode tests in 1 M KOH for HER/OER; a two-electrode BNPC-FeCo-900/CC (+||−) cell for overall water splitting; DFT calculations for H* adsorption and OER intermediates.

Limitations

  • The paper states that ECSA for carbon materials may be unreliable because high carbon content can raise ECSA even if some sites are inactive toward HER, and that calculated TOF values are conservative estimates because only surface catalytic metal sites are considered.
  • The paper attributes slight stability degradation to possible electrolyte/reference-electrode impurities, films poisoning active sites, or gas bubbles restricting electrolyte access; B was not detected by EDX due to its small atomic mass and low detector sensitivity.
  • Evident from the text: at 10 mA cm−2, BNPC-FeCo-600 actually required a lower OER overpotential (309 mV) than BNPC-FeCo-900 (320 mV), though it performed poorly at higher current; the abstract and Results also differ on the OER Tafel slope (55 vs 51 mV dec−1).

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1021/acsami.4c06141

Cites

62 of 62 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

6 Valid · 0 Not valid · 15 Not checked · 66 Own results and interpretations

33 more claims

Create a free account to see all 87 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 8
  • It may state two separate claims as one. 44
  • The quote only partly states this claim. 2

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 62 references

Cited by

Metadata

Authors
Sam, D. K., & Cao, Y.
Affiliations
University of Science and Technology of China (CN)
Corresponding author
Cao, Yan
Venue
ACS Applied Materials & Interfaces
Published
2024-06-13
Volume
16
Issue
25
Pages
32311-32321
ISSN
  • 1944-8244 (ISSN-L)
  • 1944-8252
OpenAlex
W4399599703
Cited by
15
References
62
Citations by year
2026: 5 · 2025: 6 · 2024: 4
FWCI
1.00
Type
journal article
Language
en
Open access
closed
Locations
  • ACS Applied Materials & Interfaces (publishedVersion)
  • PubMed (publishedVersion)
  • Institutional Repository of Guangzhou Institute of Energy Research, Chinese Academy of Sciences (submittedVersion)
Funders
  • Basic and Applied Basic Research Foundation of Guangdong Province (2021A1515110069)
  • National Natural Science Foundation of China (22178339)
  • Alliance of International Science Organizations
  • Chinese Academy of Sciences
  • Guangxi Innovation-Driven Development Project
  • University Science Research Project of Anhui Province (2022AH050076)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Supercapacitor Materials and Fabrication
Keywords
boron and nitrogen co-doping, carbon aerogels, hydrogen evolution reaction, oxygen evolution reaction, overall water splitting, bifunctional electrocatalysts

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.