The DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index; 8 of the 32 sources its claims cite were checked for support.
Iron–Cobalt Nanoparticles Embedded in B,N-Doped Chitosan-Derived Porous Carbon Aerogel for Overall Water Splitting
Abstract
Given their intriguing properties, porous carbons have surfaced as promising electrocatalysts for various energy conversion reactions. This study presents a unique approach where iron–cobalt (FeCo) is confined in a boron, nitrogen-doped chitosan-derived porous carbon aerogel (BNPC-FeCo) to serve as an electrocatalyst for the hydrogen evolution and oxygen evolution reactions (HER and OER). The BNPC-FeCo-900 electrocatalyst demonstrates excellent catalyst activity, with very low overpotentials of 186 and 320 mV at 10 mA cm –2, low Tafel slopes of 82 and 55 mV dec –1, and low charge transfer resistance of 2.68 and 9.25 Ω for HER and OER, respectively. Density functional theory (DFT) calculations further reveal that the cooperation between the boron, nitrogen codoped porous carbon, and the FeCo nanoparticles reduces intermediates’ energy barriers, significantly enhancing the HER and OER performance. In conclusion, this work offers significant and informative perspectives into the potential of porous carbon materials as dual-purpose electrocatalysts for water splitting.
Overview
CoChat Summary
TL;DR
The paper reports FeCo nanoparticles embedded in a B,N-doped chitosan-derived porous carbon aerogel (BNPC-FeCo-900) as a bifunctional electrocatalyst for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). It shows low overpotentials, good stability, and DFT support for enhanced HER/OER activity from the porous carbon–FeCo cooperation.
Key findings
- BNPC-FeCo-900 required overpotentials of 186 mV for HER and 320 mV for OER at 10 mA cm−2, with Tafel slopes of 82 mV dec−1 for HER and 51 mV dec−1 for OER in the Results (the abstract states 55 mV dec−1 for OER), and charge-transfer resistances of 2.68 Ω for HER and 9.25 Ω for OER.
- In a two-electrode cell using BNPC-FeCo-900/CC as both anode and cathode, cell voltages of 1.76 V and 1.95 V delivered 20 and 100 mA cm−2, respectively; it sustained 20 mA cm−2 for 12 h, with Faradaic efficiencies of 97–100% for HER and 96–100% for OER.
- DFT attributed HER activity to a pyridinic-N site in the BN-paired model with |ΔGH*| = 0.39 eV; for OER, *OOH formation was the rate-determining step on C sites, with ΔG3 values of 2.16, 1.93, and 1.27 eV for (BN)-BC1, (BN)-BC2, and (BN)-NC, respectively.
- BNPC-FeCo-900 showed the highest HER and OER mass activities of 24.90 and 177.37 A g−1, and TOF values of 0.031 H2 s−1 for HER at 250 mV and 0.109 O2 s−1 for OER.
Methods
- Synthesis: chitosan, dicyandiamide, urea, boric acid, Co(NO3)2·6H2O, and Fe(NO3)3·6H2O were dissolved in 2% acetic acid (Co:Fe molar ratio 2:1), freeze-dried, and pyrolyzed under Ar at 600–1000 °C for 3 h; controls included metal-free BNPC-900 and reduced-metal BNPC-FeCo-900-90/99.
- Characterization: XRD, SEM/TEM/HRTEM, EDX, Raman, FT-IR, XPS, N2 adsorption–desorption, and ICP-MS.
- Electrochemistry: three-electrode tests in 1 M KOH for HER/OER; a two-electrode BNPC-FeCo-900/CC (+||−) cell for overall water splitting; DFT calculations for H* adsorption and OER intermediates.
Limitations
- The paper states that ECSA for carbon materials may be unreliable because high carbon content can raise ECSA even if some sites are inactive toward HER, and that calculated TOF values are conservative estimates because only surface catalytic metal sites are considered.
- The paper attributes slight stability degradation to possible electrolyte/reference-electrode impurities, films poisoning active sites, or gas bubbles restricting electrolyte access; B was not detected by EDX due to its small atomic mass and low detector sensitivity.
- Evident from the text: at 10 mA cm−2, BNPC-FeCo-600 actually required a lower OER overpotential (309 mV) than BNPC-FeCo-900 (320 mV), though it performed poorly at higher current; the abstract and Results also differ on the OER Tafel slope (55 vs 51 mV dec−1).
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
6 Valid · 0 Not valid · 15 Not checked · 66 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“the catalytic activity of BNPC-FeCo-900 (186 mV at 10 mA cm−2 and 82.46 ± 0.37 mV dec−1) demonstrates a favorable comparison to other porous carbon electrocatalysts in an alkaline medium, such as TS-NF-FO/PC5-0.25 (207.3 mV at 10 mA cm−2 and 87.6 mV dec−1),49 SFCA-NiCo (179 mV at 10 mA cm−2 and 52 mV dec−1),50 and CN@Fe3Se4@C (168 mV at 10 mA cm−2 and 77 mV dec−1)51”
What the sources say
- Not checked — no full text of the sourcecites [49] source
- Partly supportedcites [50] sourceExperimental — accuracy not yet measured
The Electrocatalytic activity section (pp. 21529–21530) supports the SFCA-NiCo overpotential of 179 mV at 10 mA cm−2 in 1 M KOH. It reports 52 mV as the onset potential, not the Tafel slope; the reported Tafel slope is 40 mV dec−1. This citation supports the SFCA-NiCo example, but not its stated Tafel value. (LLM, conf=0.93)
- Not checked — no full text of the sourcecites [51] source
boostedstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“when the RDS is the first elementary, the OER reaction is sluggish with a high Tafel slope of approximately 120 mV dec−1.”
What the sources say
- Partly supportedcites Shinagawa et al.57 sourceExperimental — accuracy not yet measured
The Oxygen evolution reaction (OER) section identifies Equation 64 as the first step and models it as rate-determining; its discussion of Fig. 4 reports a 120 mV dec−1 Tafel slope under specified surface-coverage conditions. The paper does not establish that this slope makes the OER sluggish, and its Conclusions caution that 120 mV dec−1 does not uniquely identify the first step as rate-determining. Page numbers were unavailable in our copy. (LLM, conf=0.84)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The optimum catalyst, BNPC-FeCo-900, showed good HER activity, necessitating an overpotential of 186 mV to attain a current density of 10 mA cm−2”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“the Tafel slope of BNPC-FeCo-900 is 82 mV dec−1”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“At 10 mA cm−2, BNPC-FeCo-900 possessed an overpotential of 320 mV”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
33 more claims
Create a free account to see all 87 claims and every source verdict.
- Probably not a substantial claim. 8
- It may state two separate claims as one. 44
- The quote only partly states this claim. 2
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
“low Tafel slopes of 82 and 55 mV dec−1”
§ 3. RESULTS AND DISCUSSION
“BNPC-FeCo-900 had a Tafel slope of 51 mV dec−1”
Citations
Cites
Shinagawa, T., Garcia-Esparza, A. T., & Takanabe, K. (2015) · Scientific Reports · doi:10.1038/srep13801 · Cited by 3,287
Influence of feedstock source and pyrolysis temperature on biochar bulk and surface properties
Suliman, W., Harsh, J. B., Abu-Lail, N. I., Fortuna, A.-M., Dallmeyer, I., & Garcia-Perez, M. (2016) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2015.11.010 · Cited by 585
Approaching the activity limit of CoSe2 for oxygen evolution via Fe doping and Co vacancy
Dou, Y., He, C.-T., Zhang, L., Yin, H., Al-Mamun, M., Ma, J., & Zhao, H. (2020) · Nature Communications · doi:10.1038/s41467-020-15498-0 · Cited by 311
A concise review of the Raman spectra of carbon allotropes
Thapliyal, V., Alabdulkarim, M. E., Whelan, D. R., Mainali, B., & Maxwell, J. L. (2022) · Diamond and Related Materials · doi:10.1016/j.diamond.2022.109180 · Cited by 298
Lian, Y., Sun, H., Wang, X., Qi, P., Mu, Q., Chen, Y., Ye, J., Zhao, X., Deng, Z., & Peng, Y. (2019) · Chemical Science · doi:10.1039/c8sc03877e · Cited by 297
Song, G., Kenney, M., Chen, Y.-S., Zheng, X., Deng, Y., Chen, Z., Wang, S. X., Gambhir, S. S., Dai, H., & Rao, J. (2020) · Nature Biomedical Engineering · doi:10.1038/s41551-019-0506-0 · Cited by 262
Li, T., Lv, Y., Su, J., Wang, Y., Yang, Q., Zhang, Y., Zhou, J., Xu, L., Sun, D., & Tang, Y. (2017) · Advanced Science · doi:10.1002/advs.201700226 · Cited by 257
Chitosan-Based N-Doped Carbon Materials for Electrocatalytic and Photocatalytic Applications
Khan, A., Goepel, M., Colmenares, J. C., & Gläser, R. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b07522 · Cited by 245
Yuan, H., Wang, S., Ma, Z., Kundu, M., Tang, B., Li, J., & Wang, X. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126474 · Cited by 217
Facile fabrication of wood-inspired aerogel from chitosan for efficient removal of oil from Water
Yi, L., Yang, J., Fang, X., Xia, Y., Zhao, L., Wu, H., & Guo, S. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121507 · Cited by 209
Ye, S., Luo, F., Xu, T., Zhang, P., Shi, H., Qin, S., Wu, J., He, C., Ouyang, X., Zhang, Q., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2019.104301 · Cited by 209
Infrared study of boron–carbon chemical bonds in boron-doped activated carbon
Romanos, J., Beckner, M., Stalla, D., Tekeei, A., Suppes, G., Jalisatgi, S., Lee, M., Hawthorne, F., Robertson, J. D., Firlej, L., et al. (2013) · Carbon · doi:10.1016/j.carbon.2012.11.031 · Cited by 197
Chitosan-derived carbon aerogels with multiscale features for efficient microwave absorption
Tian, Y., Estevez, D., Wei, H., Peng, M., Zhou, L., Xu, P., Wu, C., Yan, M., Wang, H., Peng, H.-X., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129781 · Cited by 188
Jiang, F., Li, Y., & Pan, Y. (2024) · Advanced Materials · doi:10.1002/adma.202306309 · Cited by 181
Wang, L., Li, Y., Xia, M., Li, Z., Chen, Z., Ma, Z., Qin, X., & Shao, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.02.017 · Cited by 168
Ullah, N., Zhao, W., Lu, X., Oluigbo, C. J., Shah, S. A., Zhang, M., Xie, J., & Xu, Y. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2018.12.053 · Cited by 164
Fu, G., Liu, Y., Chen, Y., Tang, Y., Goodenough, J. B., & Lee, J.-M. (2018) · Nanoscale · doi:10.1039/c8nr05812a · Cited by 163
Mohammed, L. J., & Omer, K. M. (2020) · Scientific Reports · doi:10.1038/s41598-020-59958-5 · Cited by 154
Impact of Pyrolysis Temperature on the Properties of Eucalyptus Wood-Derived Biochar
Fernandes, B. C. C., Mendes, K. F., Júnior, A. F. D., Caldeira, V. P. S., Teófilo, T. M. D. S., Silva, T. S., Mendonça, V., Souza, M. D. F., & Silva, D. V. (2020) · Materials · doi:10.3390/ma13245841 · Cited by 146
Zou, X., Wu, D., Mu, Y., Xing, L., Zhang, W., Gao, Z., Xu, F., & Jiang, K. (2020) · Carbon · doi:10.1016/j.carbon.2019.12.018 · Cited by 145
Multicomponent transition metal oxides and (oxy)hydroxides for oxygen evolution
Han, J., & Guan, J. (2023) · Nano Research · doi:10.1007/s12274-022-4874-7 · Cited by 145
Sun, S., Sun, Y., Zhou, Y., Shen, J., Mandler, D., Neumann, R., & Xu, Z. J. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b02737 · Cited by 137
He, X., Han, X., Zhou, X., Chen, J., Wang, J., Chen, Y., Yu, L., Zhang, N., Li, J., Wang, S., et al. (2023) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2023.122683 · Cited by 130
Synthesis of biomass-based carbon aerogels in energy and sustainability
Sam, D. K., Sam, E. K., Durairaj, A., Lv, X., Zhou, Z., & Liu, J. (2020) · Carbohydrate Research · doi:10.1016/j.carres.2020.107986 · Cited by 116
Self-citationDual-atom Co-Fe catalysts for oxygen reduction reaction
Tang, T., Wang, Y., Han, J., Zhang, Q., Bai, X., Niu, X., Wang, Z., & Guan, J. (2023) · Chinese Journal of Catalysis · doi:10.1016/s1872-2067(22)64189-5 · Cited by 113
Lin, Y., Liu, Z., Yu, L., Zhang, G., Tan, H., Wu, K., Song, F., Mechler, A. K., Schleker, P. P. M., Lu, Q., et al. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202012615 · Cited by 89
Kobina Sam, D., Kobina Sam, E., & Lv, X. (2020) · ChemElectroChem · doi:10.1002/celc.202000829 · Cited by 89
Byeon, A., Yun, W. C., Kim, J. M., & Lee, J. W. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.141042 · Cited by 89
Reshma, R. P., Abishek, N. S., & Gopalakrishna, K. N. (2024) · Inorganic Chemistry Communications · doi:10.1016/j.inoche.2024.112451 · Cited by 86
Diatomic Fe-Co catalysts synergistically catalyze oxygen evolution reaction
Tang, T., Han, J., Wang, Z., Niu, X., & Guan, J. (2024) · Nano Research · doi:10.1007/s12274-023-6318-2 · Cited by 76
Wang, M., Feng, C., Mi, W., Guo, M., Guan, Z., Li, M., Chen, H., Liu, Y., & Pan, Y. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202309474 · Cited by 75
Park, S., Kim, I., Oh, S.-I., Kim, J., & Kim, D. (2018) · Journal of Catalysis · doi:10.1016/j.jcat.2018.08.016 · Cited by 69
Zhao, Y., & Zhang, X. (2021) · Scientific Reports · doi:10.1038/s41598-021-85661-0 · Cited by 64
Catalytic activity atlas of ternary Co–Fe–V metal oxides for the oxygen evolution reaction
Chen, J., Li, H., Pei, Z., Huang, Q., Yuan, Z., Wang, C., Liao, X., Henkelman, G., Chen, Y., & Wei, L. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04088f · Cited by 63
Lu, R., Sam, D. K., Wang, W., Gong, S., Liu, J., Durairaj, A., Li, M., & Lv, X. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.01.029 · Cited by 56
Self-citationYuan, W., Liu, J., Yi, W., Liang, L., Zhu, Y., & Chen, X. (2020) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.03.126 · Cited by 55
Multi-functionalized carbon aerogels derived from chitosan
Wang, L., Wu, Q., Zhao, B., Li, Z., Zhang, Y., Huang, L., & Yu, S. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.07.132 · Cited by 53
Lovskaya, D., Menshutina, N. V., Mochalova, M., Nosov, A. M., & Grebenyuk, A. N. (2020) · Polymers · doi:10.3390/polym12092055 · Cited by 52
Zhang, Y., Hou, X., Li, X., Li, D., Huang, F., & Weı, Q. (2020) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.06.044 · Cited by 48
Zaheer, Z. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.11.008 · Cited by 48
Porous carbon fabrication techniques: A review
Kobina Sam, D., Li, H., Xu, Y.-T., & Cao, Y. (2024) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2024.01.044 · Cited by 46
Self-citationLiu, H., Jiang, Y., Mao, Y., Jiang, Y., Shen, W., Li, M., & He, R. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.11.091 · Cited by 46
Gong, S., Xiao, X., Wang, W., Sam, D. K., Lu, R., Xu, Y., Liu, J., Wu, C., & Lv, X. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.05.054 · Cited by 42
Self-citationLi, J., Shi, C. Y., Bao, A., & Jia, J. (2021) · ACS Omega · doi:10.1021/acsomega.1c00197 · Cited by 37
Sam, D. K., Wang, W., Gong, S., Sam, E. K., Lv, X., Wang, J., & Liu, J. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.03.243 · Cited by 34
Self-citationBai, Y., Lin, F., Liu, X., Feng, J., Zhu, X., Huang, Z., Min, X., Mi, R., & Qiao, J. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105980 · Cited by 28
Wang, C., Wang, W., Guo, W., Guo, D., Li, J., Yang, X., Fu, S., Chai, D.-F., Sui, G., & Li, Y. (2023) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2023.02.038 · Cited by 25
Li, J., Shen, H., Ma, C., Zhang, H., Luo, P., Chen, J., Mu, M., & Yin, X. (2023) · Electrochimica Acta · doi:10.1016/j.electacta.2023.141896 · Cited by 23
Zhao, H., Li, J., Xu, H., Gao, X., Shi, J., Yu, K., & Ding, X. (2021) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2021.09.011 · Cited by 20
Wang, H., Yan, Y., Zhang, W., Sun, S., & Yao, S. (2023) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2023.124048 · Cited by 19
Wang, C., Ying, C., Tang, Y., Yan, Y., & Feng, X. (2020) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2020.100044 · Cited by 18
Xu, S., Chen, C., Shen, J., Xu, Z., Lu, Y., Song, P., Dong, W., Fan, R., & Shen, M. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.01.289 · Cited by 16
Visan, R. M., & Angelescu, D. G. (2023) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.3c02115 · Cited by 15
Asokan, A., Lim, C., Kim, J., Kwon, O., Lee, H., Joo, S., Jeong, H. Y., & Kim, G. (2020) · ChemNanoMat · doi:10.1002/cnma.202000099 · Cited by 13
Wang, B., Luo, S., Ai, Y., Yao, Y., Zhang, S., Huang, Y., Zhang, X., & Sun, W. (2023) · Diamond and Related Materials · doi:10.1016/j.diamond.2023.110004 · Cited by 12
Yu, J., Wang, L., Luo, L., Cheng, L., Xu, X., & Wang, Z. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.10.110 · Cited by 10
Selvam, S. P., & Cho, S. (2022) · Advanced Sustainable Systems · doi:10.1002/adsu.202200038 · Cited by 8
Fe-doped Co-N/C as effective electrocatalyst for oxygen reaction
Lin, Q., Shang, C., Chen, Z., Akinoglu, E. M., Wang, X., & Zhou, G. (2020) · Materials Research Express · doi:10.1088/2053-1591/abaa8d · Cited by 4
Ling, Q., Wu, R., Wang, Z.-H., Liang, H.-W., Lei, Z., Zhao, Z.-G., Ke, Q.-P., Liu, X.-C., & Cui, P. (2022) · Reaction Kinetics, Mechanisms and Catalysis · doi:10.1007/s11144-022-02251-5 · Cited by 4
Cited by
Sam, D. K., & Cao, Y. P. (2024) · Renewable Energy · doi:10.1016/j.renene.2024.121788 · Cited by 15
Self-citationHefnawy, M. A., Abdel‐Gaber, R., Gomha, S. M., Zaki, M. E. A., & Medany, S. S. (2024) · Electrocatalysis · doi:10.1007/s12678-024-00889-4 · Cited by 13
Wu, X., Dhanasekaran, T., Han, W., Gao, Y., Li, Y., Zhao, D., Wang, G., & Zhao, J. (2024) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.4c00680 · Cited by 9
Metadata
- Authors
- Sam, D. K., & Cao, Y.
- Affiliations
- University of Science and Technology of China (CN)
- Corresponding author
- Cao, Yan
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2024-06-13
- Volume
- 16
- Issue
- 25
- Pages
- 32311-32321
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W4399599703
- Semantic Scholar
- a4a11d7b307392ed8458705dc3b280d78acd4991
- Cited by
- 15
- References
- 62
- Citations by year
- 2026: 5 · 2025: 6 · 2024: 4
- FWCI
- 1.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Materials & Interfaces (publishedVersion)
- PubMed (publishedVersion)
- Institutional Repository of Guangzhou Institute of Energy Research, Chinese Academy of Sciences (submittedVersion)
- Funders
- Basic and Applied Basic Research Foundation of Guangdong Province (2021A1515110069)
- National Natural Science Foundation of China (22178339)
- Alliance of International Science Organizations
- Chinese Academy of Sciences
- Guangxi Innovation-Driven Development Project
- University Science Research Project of Anhui Province (2022AH050076)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Supercapacitor Materials and Fabrication
- Keywords
- boron and nitrogen co-doping, carbon aerogels, hydrogen evolution reaction, oxygen evolution reaction, overall water splitting, bifunctional electrocatalysts
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.