The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Interrelationships among Grain Size, Surface Composition, Air Stability, and Interfacial Resistance of Al-Substituted Li7La3Zr2O12 Solid Electrolytes
Abstract
The interfacial resistances of symmetrical lithium cells containing Al-substituted Li7La3Zr2O12 (LLZO) solid electrolytes are sensitive to their microstructures and histories of exposure to air. Air exposure of LLZO samples with large grain sizes (∼150 μm) results in dramatically increased interfacial impedances in cells containing them, compared to those with pristine large-grained samples. In contrast, a much smaller difference is seen between cells with small-grained (∼20 μm) pristine and air-exposed LLZO samples. A combination of soft X-ray absorption (sXAS) and Raman spectroscopy, with probing depths ranging from nanometer to micrometer scales, revealed that the small-grained LLZO pellets are more air-stable than large-grained ones, forming far less surface Li2CO3 under both short- and long-term exposure conditions. Surface sensitive X-ray photoelectron spectroscopy (XPS) indicates that the better chemical stability of the small-grained LLZO is related to differences in the distribution of Al and Li at sample surfaces. Density functional theory calculations show that LLZO can react via two different pathways to form Li2CO3. The first, more rapid, pathway involves a reaction with moisture in air to form LiOH, which subsequently absorbs CO2 to form Li2CO3. The second, slower, pathway involves direct reaction with CO2 and is favored when surface lithium contents are lower, as with the small-grained samples. These observations have important implications for the operation of solid-state lithium batteries containing LLZO because the results suggest that the interfacial impedances of these devices is critically dependent upon specific characteristics of the solid electrolyte and how it is prepared.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
Self-citationA lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Inorganic solid Li ion conductors: An overview
Knauth, P. (2009) · Solid State Ionics · doi:10.1016/j.ssi.2009.03.022 · Cited by 1,170
Progress and prospective of solid-state lithium batteries
Takada, K. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.034 · Cited by 1,056
Ionic Conductivity of Solid Electrolytes Based on Lithium Titanium Phosphate
Aono, H., Sugimoto, E., Sadaoka, Y., Imanaka, N., & Adachi, G. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086597 · Cited by 923
Ong, S. P., Mo, Y., Richards, W. D., Miara, L., Lee, H. S., & Ceder, G. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23355j · Cited by 710
Crystal Chemistry and Stability of “Li7La3Zr2O12” Garnet: A Fast Lithium-Ion Conductor
Geiger, C. A., Alekseev, E., Lazic, B., Fisch, M., Armbruster, T., Langner, R., Fechtelkord, M., Kim, N., Pettke, T., & Weppner, W. (2011) · Inorganic Chemistry · doi:10.1021/ic101914e · Cited by 703
Cited by
Chen, R., Li, Q., Yu, X., Chen, L., & Li, H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00268 · Cited by 1,678
Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes
Banerjee, A., Wang, X., Fang, C., Wu, E. A., & Meng, Y. S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00101 · Cited by 1,526
Gao, Z., Sun, H., Fu, L., Ye, F., Zhang, Y., Luo, W., & Huang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705702 · Cited by 1,300
Li, M., Wang, C., Chen, Z., Xu, K., & Lu, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00531 · Cited by 944
A durable and safe solid-state lithium battery with a hybrid electrolyte membrane
Zhang, W., Nie, J., Li, F., Wang, Z. L., & Sun, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.01.028 · Cited by 606
Lin, F., Liu, Y., Yu, X., Cheng, L., Singer, A., Shpyrko, O. G., Xin, H. L., Tamura, N., Tian, C., Weng, T.-C., et al. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00007 · Cited by 582
Self-citationSolid-state lithium batteries: Safety and prospects
Guo, Y., Wu, S., He, Y.-B., Kang, F., Chen, L., Li, H., & Yang, Q.-H. (2022) · eScience · doi:10.1016/j.esci.2022.02.008 · Cited by 507
Challenges and perspectives of garnet solid electrolytes for all solid-state lithium batteries
Liu, Q., Geng, Z., Han, C., Fu, Y., Li, S., He, Y.-B., Kang, F., & Li, B. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.019 · Cited by 478
Solvent-Free, Single Lithium-Ion Conducting Covalent Organic Frameworks
Jeong, K., Park, S., Jung, G. Y., Kim, S. H., Lee, Y.-H., Kwak, S. K., & Lee, S.-Y. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b00543 · Cited by 440
Impact of air exposure and surface chemistry on Li–Li7La3Zr2O12 interfacial resistance
Sharafi, A., Yu, S., Naguib, M., Lee, M., Ma, C., Meyer, H. M., Nanda, J., Chi, M., Siegel, D. J., & Sakamoto, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03162a · Cited by 437
Garnet Solid Electrolyte for Advanced All‐Solid‐State Li Batteries
Xu, L., Li, J., Deng, W., Shuai, H., Li, S., Xu, Z., Li, J., Hou, H., Peng, H., Zou, G., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000648 · Cited by 344
Dopant‐Dependent Stability of Garnet Solid Electrolyte Interfaces with Lithium Metal
Zhu, Y., Connell, J. G., Tepavcevic, S., Zapol, P., Garcia‐Mendez, R., Taylor, N. J., Sakamoto, J., Ingram, B. J., Curtiss, L. A., Freeland, J. W., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803440 · Cited by 323
Ionic Conductivity and Air Stability of Al-Doped Li7La3Zr2O12 Sintered in Alumina and Pt Crucibles
Xia, W., Xu, B., Duan, H., Guo, Y., Kang, H., Li, H., & Liu, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12186 · Cited by 308
Antiperovskite Electrolytes for Solid-State Batteries
Xia, W., Zhao, Y., Zhao, F., Adair, K., Zhao, R., Li, S., Zou, R., Zhao, Y., & Sun, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00594 · Cited by 288
Sharafi, A., Haslam, C. G., Kerns, R. D., Wolfenstine, J., & Sakamoto, J. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta06790a · Cited by 272
Yang, W., & Devereaux, T. P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.018 · Cited by 266
Li, L., Deng, Y., & Chen, G. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.03.017 · Cited by 256
Self-citation
Metadata
- Authors
- Cheng, L., Wu, C. H., Jarry, A., Chen, W., Ye, Y., Zhu, J., Kostecki, R., Persson, K., Guo, J., Salmeron, M., Chen, G., & Doeff, M.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-08-04
- Volume
- 7
- Issue
- 32
- Pages
- 17649-17655
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2398528971
- Cited by
- 269
- References
- 22
- FWCI
- 9.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.