The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Amine-Impregnated Mesoporous Silica Nanotube as an Emerging Nanocomposite for CO2 Capture
Abstract
Pristine halloysite nanotubes (HNTs) were pretreated to produce mesoporous silica nanotubes (MSiNTs), which was further impregnated with polyethenimine (PEI) to prepare an emerging nanocomposite MSiNTs/PEI (MP) for CO2 capture. Thermogravimetric analysis (TGA) was employed to analyze the influences of PEI loading amount and adsorption temperature on CO2 adsorption capacity of the nanocomposite. The Brunauer-Emmett-Teller (BET) surface area (SBET) of MSiNTs was six times higher than that of HNTs, and the corresponding pore volume was more than two times higher than that of HNTs. The well dispersion of PEI within the nanotubes of MSiNTs benefits more CO2 gas adsorption, and the adsorption capacity of the nanocomposite could reach 2.75 mmol/g at 85 °C for 2 h. The CO2 adsorption on the nanocomposite was demonstrated to occur via a two-stage process: initially, a sharp linear weight increase at the beginning, and then a relatively slow adsorption step. The adsorption capacity could reach as high as 70% within 2 min. Also, the nanocomposite exhibited good stability on CO2 adsorption/desorption performance, indicating that the as-prepared emerging nanocomposite show an interesting application potential in the field of CO2 capture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cooperative insertion of CO2 in diamine-appended metal-organic frameworks
McDonald, T. M., Mason, J. A., Kong, X., Bloch, E. D., Gygi, D., Dani, A., Crocellà, V., Giordanino, F., Odoh, S. O., Drisdell, W. S., et al. (2015) · Nature · doi:10.1038/nature14327 · Cited by 1,342
McDonald, T. M., Lee, W. R., Mason, J. A., Wiers, B. M., Hong, C. S., & Long, J. R. (2012) · Journal of the American Chemical Society · doi:10.1021/ja300034j · Cited by 1,289
Amine-Based CO2 Capture Technology Development from the Beginning of 2013—A Review
Dutcher, B., Fan, M., & Russell, A. G. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507465f · Cited by 981
Functionalization of Halloysite Clay Nanotubes by Grafting with γ-Aminopropyltriethoxysilane
Yuan, P., Southon, P. D., Liu, Z., Green, M. E. R., Hook, J. M., Antill, S. J., & Kepert, C. J. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp805657t · Cited by 962
Xu, X., Song, C., Andrésen, J. M., Miller, B. G., & Scaroni, A. W. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00388-3 · Cited by 769
Carbon dioxide storage potential of shales
Busch, A., Alles, S., Gensterblum, Y., Prinz, D., Dewhurst, D. N., Raven, M. D., Stanjek, H., & Krooss, B. M. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2008.03.003 · Cited by 673
“Molecular Basket” Sorbents for Separation of CO2 and H2S from Various Gas Streams
Ma, X., Wang, X., & Song, C. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8074105 · Cited by 532
A review of efficiency penalty in a coal-fired power plant with post-combustion CO2 capture
Goto, K., Yogo, K., & Higashii, T. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.05.020 · Cited by 523
Absorption of Carbon Dioxide into Aqueous Blends of Diethanolamine and Methyldiethanolamine
Rinker, E. B., Ashour, S. S., & Sandall, O. C. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990850r · Cited by 364
Chitosan derived nitrogen-doped microporous carbons for high performance CO2 capture
Fan, X., Zhang, L., Zhang, G., Shu, Z., & Shi, J. (2013) · Carbon · doi:10.1016/j.carbon.2013.05.026 · Cited by 345
CO2 adsorption on branched polyethyleneimine-impregnated mesoporous silica SBA-15
Sanz, R., Calleja, G., Arencibia, A., & Sanz-Pérez, E. S. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2009.12.070 · Cited by 269
Chen, Z., Deng, S., Wei, H., Wang, B., Huang, J., & Yu, G. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400661b · Cited by 263
Peng, K., Fu, L., Yang, H., & Ouyang, J. (2016) · Scientific Reports · doi:10.1038/srep19723 · Cited by 249
Self-citationPolyethyleneimine–nano silica composites: a low-cost and promising adsorbent for CO2 capture
Li, K., Jiang, J., Tian, S., Yan, F., & Chen, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04275a · Cited by 207
Peng, K., Fu, L., Ouyang, J., & Yang, H. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504942 · Cited by 179
Self-citationDevelopment of a new clay supported polyethylenimine composite for CO2 capture
Wang, W., Xiao, J., Wei, X., Ding, J., Wang, X., & Song, C. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.03.090 · Cited by 158
CO2 adsorption performance of amino-functionalized SBA-15 under post-combustion conditions
Sanz-Pérez, E. S., Olivares‐Marín, M., Arencibia, A., Sanz, R., Calleja, G., & Maroto‐Valer, M. M. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.05.011 · Cited by 140
Yu, J., Le, Y., & Cheng, B. (2012) · RSC Advances · doi:10.1039/c2ra21017g · Cited by 137
CO2 capture with pore-expanded MCM-41 silica modified with amino groups by double functionalization
Sanz, R., Calleja, G., Arencibia, A., & Sanz-Pérez, E. S. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.10.045 · Cited by 124
Wang, X., Guo, Q., & Kong, T. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.03.098 · Cited by 123
CO2 Adsorption on Amine-Functionalized Periodic Mesoporous Benzenesilicas
Sim, K., Lee, N., Kim, J., Cho, E., Gunathilake, C. A., & Jaroniec, M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00306 · Cited by 113
Modified nanosepiolite as an inexpensive support of tetraethylenepentamine for CO2 sorption
Irani, M., Fan, M., Ismail, H., Tuwati, A., Dutcher, B., & Russell, A. G. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.11.005 · Cited by 111
Vilarrasa‐García, E., Ortigosa-Moya, E. M., Cecilia, J. A., Cavalcante, C. L., Jiménez-Jiménez, J., Azevedo, D. C. S., & Rodríguez-Castellón, E. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.08.032 · Cited by 110
Liu, F., Wang, L., Huang, Z., Li, C., Li, W., Li, R.-X., & Li, W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500089g · Cited by 110
Sung, S., & Suh, M. P. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02861a · Cited by 107
Adsorption of CO 2 on amine-functionalised MCM-41: experimental and theoretical studies
dos Santos, T. C., Bourrelly, S., Llewellyn, P. L., Carneiro, J. W. D. M., & Ronconi, C. M. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp00581g · Cited by 105
Preparation and CO2 adsorption of diamine modified montmorillonite via exfoliation grafting route
Stevens, L. A., Williams, K., Han, W. Y., Drage, T. C., Snape, C. E., Wood, J., & Wang, J. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.11.058 · Cited by 103
Nanoclay-Based Solid Sorbents for CO2 Capture
Roth, E. A., Agarwal, S., & Gupta, R. K. (2013) · Energy & Fuels · doi:10.1021/ef302017m · Cited by 99
Development of monolithic adsorbent via polymeric sol–gel process for low-concentration CO2 capture
Kong, Y., Shen, X., Cui, S., & Fan, M. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.011 · Cited by 98
Bello, A., & Idem, R. O. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050562x · Cited by 98
Halloysite Nanotubes Capturing Isotope Selective Atmospheric CO2
Jana, S., Das, S. C., Ghosh, C., Maity, A., & Pradhan, M. (2015) · Scientific Reports · doi:10.1038/srep08711 · Cited by 88
Amine modification on kaolinites to enhance CO2 adsorption
Chen, Y., & Lu, D.-L. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.08.050 · Cited by 82
Highly Stable Amine-modified Mesoporous Silica Materials for Efficient CO2 Capture
Liu, S., Wu, C., Lee, H.-K., & Liu, S.-B. (2009) · Topics in Catalysis · doi:10.1007/s11244-009-9413-z · Cited by 81
Polyethylenimine-Magadiite Layered Silicate Sorbent for CO2 Capture
Vieira, R. B., & Pastore, H. O. (2014) · Environmental Science & Technology · doi:10.1021/es404501e · Cited by 73
Surface modification of a low cost bentonite for post-combustion CO2 capture
Chen, C., Park, D.-W., & Ahn, W. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.07.005 · Cited by 69
Shu, Z., Chen, Y., Zhou, J. L., Li, T., Yu, D., & Wang, Y. (2015) · Applied Clay Science · doi:10.1016/j.clay.2015.04.014 · Cited by 61
Self-citationKainiemi, L., Eloneva, S., Toikka, A., Levänen, J., & Järvinen, M. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.016 · Cited by 59
A new mesoporous amine-TiO2 based pre-combustion CO2 capture technology
Jiang, G., Huang, Q., Kenarsari, S. D., Hu, X. D., Russell, A. G., Fan, M., & Shen, X. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.01.081 · Cited by 58
Lithium orthosilicate with halloysite as silicon source for high temperature CO 2 capture
Niu, M., Li, X., Ouyang, J., & Yang, H. (2016) · RSC Advances · doi:10.1039/c6ra05004b · Cited by 54
Self-citationWang, W., Li, J., Wei, X., Ding, J., Feng, H., Yan, J., & Yang, J. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.12.072 · Cited by 52
Hierarchically Porous Aminosilica Monolith as a CO 2 Adsorbent
Ko, Y. G., Lee, H. J., Kim, J. Y., & Choi, U. S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5029022 · Cited by 48
Liu, S., Hsiao, W.-C., & Sie, W.-H. (2012) · Adsorption · doi:10.1007/s10450-012-9429-8 · Cited by 37
Mineral carbonation of a desulfurization residue for CO 2 sequestration
Ding, W., Yang, H., & Ouyang, J. (2015) · RSC Advances · doi:10.1039/c5ra10576e · Cited by 29
Self-citationAu encapsulated into Al-MCM-41 mesoporous material: in situ synthesis and electronic structure
Fu, L., Huo, C., He, X., & Yang, H. (2015) · RSC Advances · doi:10.1039/c5ra01701g · Cited by 27
Self-citationFluorescence and room temperature activity of Y 2 O 3 :(Eu 3+ ,Au 3+ )/palygorskite nanocomposite
He, X., & Yang, H. (2014) · Dalton Transactions · doi:10.1039/c4dt01628a · Cited by 24
Self-citation
Cited by
Review of pre-combustion capture and ionic liquid in carbon capture and storage
Theo, W. L., Lim, J. S., Hashim, H., Mustaffa, A. A., & Ho, W. S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.09.103 · Cited by 396
CO2 capture adsorbents functionalized by amine – bearing polymers: A review
Varghese, A. M., & Karanikolos, G. N. (2020) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2020.103005 · Cited by 363
Abd, A. A., Naji, S. Z., Hashim, A. S., & Othman, M. R. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104142 · Cited by 346
Recent developments and consideration issues in solid adsorbents for CO2 capture from flue gas
Nie, L., Mu, Y., Jin, J., Chen, J., & Mi, J. (2018) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2018.07.012 · Cited by 122
Ran, Y., Peng, K., Li, Z., Guo, X., Chen, H., Cai, S., Su, L., Niu, M., Lu, D., & Wang, H. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.163149 · Cited by 27
Self-citation
Metadata
- Authors
- Niu, M., Yang, H., Zhang, X., Wang, Y., & Tang, A.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-06-30
- Volume
- 8
- Issue
- 27
- Pages
- 17312-17320
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2437782986
- Cited by
- 256
- References
- 45
- FWCI
- 28.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
