The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Effect of Selective Contacts on the Thermal Stability of Perovskite Solar Cells
Open accessAbstract
Thermal stability of CH 3 NH 3 PbI 3 (MAPbI 3 )-based perovskite solar cells was investigated for normal structure including the mesoporous TiO 2 layer and spiro-MeOTAD and the inverted structure with PCBM and NiO. MAPbI 3 was found to be intrinsically stable from 85 °C to 120 °C in the absence of moisture. However, fast degradation was observed for the encapsulated device including spiro-MeOTAD upon thermal stress at 85 °C. Photoluminescence (PL) intensity and the time constant for charge separation increased with thermal exposure time, which is indicative of inhibition of charge separation from MAPbI 3 into spiro-MeOTAD. A full recovery of photovoltaic performance was observed for the 85 °C-aged device after renewal with fresh spiro-MeOTAD, which clearly indicates that thermal instability of the normal structured device is mainly due to spiro-MeOTAD, and MAPbI 3 is proved to be thermally stable. Spiro-MeOTAD with additives was crystallized at 85 °C due to a low glass transition temperature, and hole mobility was significantly deteriorated, which was responsible for the thermal instability. Thermal stability was significantly improved for the inverted structure with the NiO hole transporting layer, where the power conversion efficiency (PCE) was maintained at 74% of its initial PCE of 14.71% after the 80th thermal cycle (one cycle: heating at 85 °C for 2 h and cooling at 25 °C for 2 h). This work implies that the thermal stability of perovskite solar cells depends on selective contacts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citationSolvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Self-citationEperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Self-citation6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Self-citationAhn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Self-citationIntrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Cited by
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
Jeon, N. J., Na, H., Jung, E. H., Yang, T.-Y., Lee, Y. G., Kim, G., Shin, H.-W., Il Seok, S., Lee, J., & Seo, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0200-6 · Cited by 2,089
Self-citationIn Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells
Chen, P., Bai, Y., Wang, S., Lyu, M., Yun, J., & Wang, L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706923 · Cited by 776
Lessons learned from spiro-OMeTAD and PTAA in perovskite solar cells
Rombach, F. M., Haque, S. A., & Macdonald, T. J. (2021) · Energy & Environmental Science · doi:10.1039/d1ee02095a · Cited by 730
Domanski, K., Alharbi, E. A., Hagfeldt, A., Grätzel, M., & Tress, W. (2018) · Nature Energy · doi:10.1038/s41560-017-0060-5 · Cited by 685
Towards commercialization: the operational stability of perovskite solar cells
Li, N., Niu, X., Chen, Q., & Zhou, H. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00573h · Cited by 633
Roy, P., Kumar Sinha, N., Tiwari, S., & Khare, A. (2020) · Solar Energy · doi:10.1016/j.solener.2020.01.080 · Cited by 541
Chen, J., Zhao, X., Kim, S., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201902902 · Cited by 527
Self-citationImpact of H2O on organic–inorganic hybrid perovskite solar cells
Huang, J., Tan, S., Lund, P. D., & Zhou, H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01674c · Cited by 489
The Role of the Interfaces in Perovskite Solar Cells
Shao, S., & Loi, M. A. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.201901469 · Cited by 477
Thermally stable, planar hybrid perovskite solar cells with high efficiency
Choi, K., Lee, J., Kim, H. I., Park, C. W., Kim, G.-W., Choi, H., Park, S., Park, S. A., & Park, T. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02242a · Cited by 458
Self-citationInterface Engineering for Highly Efficient and Stable Planar p‐i‐n Perovskite Solar Cells
Bai, Y., Meng, X., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701883 · Cited by 418
Liu, Z., Chang, J., Lin, Z., Zhou, L., Yang, Z., Chen, D., Zhang, C., Liu, S. (., & Hao, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703432 · Cited by 324
Meng, L., Sun, C., Wang, R., Huang, W., Zhao, Z., Sun, P., Huang, T., Xue, J., Lee, J.-W., Zhu, C., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10520 · Cited by 308
Han, J., Park, K., Tan, S., Vaynzof, Y., Xue, J., Diau, E. W.-G., Bawendi, M. G., Lee, J.-W., & Jeon, I. (2025) · Nature Reviews Methods Primers · doi:10.1038/s43586-024-00373-9 · Cited by 304
Zhang, H., Yang, Z., Zhou, M., Zhao, L., Jiang, T., Yang, H., Yu, X., Qiu, J., Yang, Y. (., & Xu, X. (2021) · Advanced Materials · doi:10.1002/adma.202102529 · Cited by 300
Chen, J., Seo, J., & Park, N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702714 · Cited by 299
Self-citationJena, A. K., Numata, Y., Ikegami, M., & Miyasaka, T. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta07674f · Cited by 291
Novel p-dopant toward highly efficient and stable perovskite solar cells
Seo, J.-Y., Kim, H.-S., Akin, S., Stojanovic, M., Simon, E., Fleischer, M., Hagfeldt, A., Zakeeruddin, S. M., & Grätzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01500g · Cited by 277
Self-citationA Review: Thermal Stability of Methylammonium Lead Halide Based Perovskite Solar Cells
Ava, T. T., Al Mamun, A., Marsillac, S., & Namkoong, G. (2019) · Applied Sciences · doi:10.3390/app9010188 · Cited by 260
Inorganic Hole Transporting Materials for Stable and High Efficiency Perovskite Solar Cells
Chen, J., & Park, N.-G. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01177 · Cited by 255
Self-citationChen, J., Kim, S., & Park, N. (2018) · Advanced Materials · doi:10.1002/adma.201801948 · Cited by 254
Self-citationKosasih, F. U., & Ducati, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.02.055 · Cited by 86
Metadata
- Authors
- Zhao, X., Kim, H.-S., Seo, J.-Y., & Park, N.-G.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-02-20
- Volume
- 9
- Issue
- 8
- Pages
- 7148-7153
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2586249383
- Cited by
- 265
- References
- 29
- FWCI
- 12.98
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.