The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Addressing the Interface Issues in All-Solid-State Bulk-Type Lithium Ion Battery via an All-Composite Approach
Abstract
All-solid-state bulk-type lithium ion batteries (LIBs) are considered ultimate solutions to the safety issues associated with conventional LIBs using flammable liquid electrolyte. The development of bulk-type all-solid-state LIBs has been hindered by the low loading of active cathode materials, hence low specific surface capacity, and by the high interface resistance, which results in low rate and cyclic performance. In this contribution, we propose and demonstrate a synergistic all-composite approach to fabricating flexible all-solid-state LIBs. PEO-based composite cathode layers (filled with LiFePO 4 particles) of ∼300 μm in thickness and composite electrolyte layers (filled with Al-LLZTO particles) are stacked layer-by-layer with lithium foils as negative layer and hot-pressed into a monolithic all-solid-state LIB. The flexible LIB delivers a high specific discharge capacity of 155 mAh/g, which corresponds to an ultrahigh surface capacity of 10.8 mAh/cm 2, exhibits excellent capacity retention up to at least 10 cycles and could work properly under harsh operating conditions such as bending or being sectioned into pieces. The all-composite approach is favorable for improving both mesoscopic and microscopic interfaces inside the all-solid-state LIB and may provide a new toolbox for design and fabrication of all-solid-state LIBs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Runaway risk of forming toxic compounds
Hammami, A., Raymond, N., & Armand, M. (2003) · Nature · doi:10.1038/424635b · Cited by 346
Cited by
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
New horizons for inorganic solid state ion conductors
Zhang, Z., Shao, Y., Lotsch, B., Hu, Y.-S., Li, H., Janek, J., Nazar, L. F., Nan, C.-W., Maier, J., Armand, M., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01053f · Cited by 1,321
Self-citationBenchmarking the performance of all-solid-state lithium batteries
Randau, S., Weber, D. A., Kötz, O., Koerver, R., Braun, P., Weber, A., Ivers-Tiffée, E., Adermann, T., Kulisch, J., Zeier, W. G., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0565-1 · Cited by 1,219
Zhang, X., Liu, T., Zhang, S., Huang, X., Xu, B., Lin, Y., Xu, B., Li, L., Nan, C.-W., & Shen, Y. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06364 · Cited by 1,017
Self-citationSmart Textiles for Electricity Generation
Chen, G., Li, Y., Bick, M., & Chen, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00821 · Cited by 931
Progress and Perspective of Ceramic/Polymer Composite Solid Electrolytes for Lithium Batteries
Li, S., Zhang, S., Shen, L., Liu, Q., Ma, J., Lv, W., He, Y., & Yang, Q. (2020) · Advanced Science · doi:10.1002/advs.201903088 · Cited by 825
Elastomeric electrolytes for high-energy solid-state lithium batteries
Lee, M. J., Han, J., Lee, K., Lee, Y. J., Kim, B. G., Jung, K.-N., Kim, B. J., & Lee, S. W. (2022) · Nature · doi:10.1038/s41586-021-04209-4 · Cited by 777
Review—Practical Challenges Hindering the Development of Solid State Li Ion Batteries
Kerman, K., Luntz, A., Viswanathan, V., Chiang, Y.-M., & Chen, Z. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1571707jes · Cited by 712
Interfaces in Solid-State Lithium Batteries
Xu, L., Tang, S., Cheng, Y., Wang, K., Liang, J., Liu, C., Cao, Y.-C., Wei, F., & Mai, L. (2018) · Joule · doi:10.1016/j.joule.2018.07.009 · Cited by 702
Challenges and perspectives of garnet solid electrolytes for all solid-state lithium batteries
Liu, Q., Geng, Z., Han, C., Fu, Y., Li, S., He, Y.-B., Kang, F., & Li, B. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.019 · Cited by 478
Jiang, T., He, P., Wang, G., Shen, Y., Nan, C., & Fan, L. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903376 · Cited by 476
Self-citationRecent progress on solid-state hybrid electrolytes for solid-state lithium batteries
Liang, J., Luo, J., Sun, Q., Yang, X., Li, R., & Sun, X. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.06.021 · Cited by 365
Nie, K., Hong, Y., Qiu, J., Li, Q., Yu, X., Li, H., & Chen, L. (2018) · Frontiers in Chemistry · doi:10.3389/fchem.2018.00616 · Cited by 278
Universal Soldering of Lithium and Sodium Alloys on Various Substrates for Batteries
Wang, C., Xie, H., Zhang, L., Gong, Y., Pastel, G., Dai, J., Liu, B., Wachsman, E. D., & Hu, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701963 · Cited by 278
Building Better Batteries in the Solid State: A Review
Mauger, A., Julien, C. M., Paolella, A., Armand, M., & Zaghib, K. (2019) · Materials · doi:10.3390/ma12233892 · Cited by 277
Li, L., Deng, Y., & Chen, G. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.03.017 · Cited by 256
Wang, X., Zhang, Y., Zhang, X., Liu, T., Lin, Y.-H., Li, L., Shen, Y., & Nan, C.-W. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06658 · Cited by 255
Self-citation
Metadata
- Authors
- Chen, R.-J., Zhang, Y.-B., Liu, T., Xu, B.-Q., Lin, Y.-H., Nan, C.-W., & Shen, Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-03-07
- Volume
- 9
- Issue
- 11
- Pages
- 9654-9661
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2593491414
- Cited by
- 176
- References
- 1
- FWCI
- 7.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.