The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
3D-Printed Metal–Organic Framework Monoliths for Gas Adsorption Processes
Abstract
Abstract Metal–organic frameworks (MOFs) have shown promising performance in separation, adsorption, reaction, and storage of various industrial gases; however, their large-scale applications have been hampered by the lack of a proper strategy to formulate them into scalable gas–solid contactors. Herein, we report the fabrication of MOF monoliths using the 3D printing technique and evaluation of their adsorptive performance in CO2 removal from air. The 3D-printed MOF-74(Ni) and UTSA-16(Co) monoliths with MOF loadings as high as 80 and 85 wt %, respectively, were developed, and their physical and structural properties were characterized and compared with those of MOF powders. Our adsorption experiments showed that, upon exposure to 5000 ppm (0.5%) CO2 at 25 °C, the MOF-74(Ni) and UTSA-16(Co) monoliths can adsorb CO2 with uptake capacities of 1.35 and 1.31 mmol/g, respectively, which are 79% and 87% of the capacities of their MOF analogues under the same conditions. Furthermore, a stable performance was obtained for self-standing 3D-printed monolithic structures with relatively good adsorption kinetics. The preliminary findings reported in this investigation highlight the advantage of the robocasting (3D printing) technique for shaping MOF materials into practical configurations that are suitable for various gas separation applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal–Organic Frameworks for Separations
Li, J.-R., Sculley, J., & Zhou, H.-C. (2012) · Chemical Reviews · doi:10.1021/cr200190s · Cited by 6,323
MOF thin films: existing and future applications
Shekhah, O., Liu, J., Fischer, R. A., & Wöll, C. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00147c · Cited by 1,395
Microporous metal-organic framework with potential for carbon dioxide capture at ambient conditions
Xiang, S., He, Y., Zhang, Z., Wu, H., Zhou, W., Krishna, R., & Chen, B. (2012) · Nature Communications · doi:10.1038/ncomms1956 · Cited by 875
Perspective of microporous metal–organic frameworks for CO2capture and separation
Zhang, Z., Yao, Z.-Z., Xiang, S., & Chen, B. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00143e · Cited by 767
Dietzel, P. D. C., Besikiotis, V., & Blom, R. (2009) · Journal of Materials Chemistry · doi:10.1039/b911242a · Cited by 689
He, Y., Krishna, R., & Chen, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22858k · Cited by 674
MOF-74 building unit has a direct impact on toxic gas adsorption
Grant Glover, T., Peterson, G. W., Schindler, B. J., Britt, D., & Yaghi, O. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2010.10.002 · Cited by 617
Low, Z.-X., Chua, Y. T., Ray, B. M., Mattia, D., Metcalfe, I. S., & Patterson, D. A. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.10.006 · Cited by 465
Microwave synthesis and characterization of MOF-74 (M=Ni, Mg) for gas separation
Wu, X., Bao, Z., Yuan, B., Wang, J., Sun, Y., Luo, H., & Deng, S. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.06.023 · Cited by 314
Ruiz-Morales, J. C., Tarancón, A., Canales-Vázquez, J., Méndez-Ramos, J., Hernández-Afonso, L., Acosta-Mora, P., Marín Rueda, J. R., & Fernández-González, R. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03526d · Cited by 299
Structured adsorbents in gas separation processes
Rezaei, F., & Webley, P. (2010) · Separation and Purification Technology · doi:10.1016/j.seppur.2009.10.004 · Cited by 294
Self-citation3D-Printed Zeolite Monoliths for CO2 Removal from Enclosed Environments
Thakkar, H., Eastman, S., Hajari, A., Rownaghi, A. A., Knox, J. C., & Rezaei, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09647 · Cited by 284
Self-citationThree‐dimensional Printing for Catalytic Applications: Current Status and Perspectives
Zhou, X., & Liu, C. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701134 · Cited by 231
3D printing of a heterogeneous copper-based catalyst
Tubío, C. R., Azuaje, J., Escalante, L., Coelho, A., Guitián, F., Sotelo, E., & Gil, A. (2016) · Journal of Catalysis · doi:10.1016/j.jcat.2015.11.019 · Cited by 214
Optimum structured adsorbents for gas separation processes
Rezaei, F., & Webley, P. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.08.029 · Cited by 210
Self-citationRen, J., Musyoka, N. M., Langmi, H. W., Swartbooi, A., North, B. C., & Mathe, M. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.02.011 · Cited by 186
CO2, CH4 and N2 separation with a 3DFD-printed ZSM-5 monolith
Couck, S., Lefevere, J., Mullens, S., Protasova, L., Meynen, V., Desmet, G., Baron, G. V., & Denayer, J. F. M. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.046 · Cited by 164
Sachse, A., Ameloot, R., Coq, B., Fajula, F., Coasne, B., De Vos, D., & Galarneau, A. (2012) · Chemical Communications · doi:10.1039/c2cc17190b · Cited by 158
MOF-74 and UTSA-16 film growth on monolithic structures and their CO2 adsorption performance
Rezaei, F., Lawson, S., Hosseini, H., Thakkar, H. V., Hajari, A., Monjezi, S., & Rownaghi, A. A. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.11.058 · Cited by 155
Self-citationThakkar, H. V., Eastman, S., Al-Mamoori, A. A., Hajari, A., Rownaghi, A. A., & Rezaei, F. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16732 · Cited by 152
Self-citationMOFs meet monoliths: Hierarchical structuring metal organic framework catalysts
Ramos–Fernández, E. V., Garcia-Domingos, M., Juan‐Alcañiz, J., Gascón, J., & Kapteijn, F. (2010) · Applied Catalysis A General · doi:10.1016/j.apcata.2010.05.019 · Cited by 147
3D-printed SAPO-34 monoliths for gas separation
Couck, S., Cousin-Saint-Remi, J., der Perre, S. V., Baron, G. V., Minas, C., Ruch, P., & Denayer, J. F. M. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.07.014 · Cited by 135
Metal‐Organic Frameworks in Monolithic Structures
Küsgens, P., Zgaverdea, A. C., Fritz, H. ‐., Siegle, S., & Kaskel, S. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.03824.x · Cited by 134
Manufacturing of metal-organic framework monoliths and their application in CO 2 adsorption
Hong, W. Y., Perera, S. P., & Burrows, A. D. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.05.014 · Cited by 128
Monolith-Supported Amine-Functionalized Mg2(dobpdc) Adsorbents for CO2 Capture
Darunte, L. A., Terada, Y., Murdock, C. R., Walton, K. S., Sholl, D. S., & Jones, C. W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02035 · Cited by 117
CO2 Capture in Dry and Wet Conditions in UTSA-16 Metal–Organic Framework
Masala, A., Vitillo, J. G., Mondino, G., Grande, C. A., Blom, R., Manzoli, M., Marshall, M., & Bordiga, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13216 · Cited by 101
Selective Dynamic CO2 Separations on Mg-MOF-74 at Low Pressures: A Detailed Comparison with 13X
Rémy, T., Peter, S. A., der Perre, S. V., Valvekens, P., Vos, D. E. D., Baron, G. V., & Denayer, J. F. M. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp401923v · Cited by 92
Moitra, N., Fukumoto, S., Reboul, J., Sumida, K., Zhu, Y., Nakanishi, K., Furukawa, S., Kitagawa, S., & Kanamori, K. (2015) · Chemical Communications · doi:10.1039/c4cc09694k · Cited by 77
An efficient recipe for formulation of metal-organic Frameworks
Grande, C. A., Águeda, V. I., Spjelkavik, A. I., & Blom, R. (2014) · Chemical Engineering Science · doi:10.1016/j.ces.2014.06.048 · Cited by 70
Lawson, S., Hajari, A., Rownaghi, A. A., & Rezaei, F. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2017.03.072 · Cited by 52
Self-citationMonolithic, Crystalline MOF Coating: An Excellent Patterning and Photoresist Material
Wang, Z., Liu, J., Grosjean, S., Wagner, D., Guo, W., Gu, Z., Heinke, L., Gliemann, H., Bräse, S., & Wöll, C. (2015) · ChemNanoMat · doi:10.1002/cnma.201500031 · Cited by 37
Creamer, A. E., & Gao, B. (2015) · Springer briefs in molecular science · doi:10.1007/978-3-319-17010-7_3 · Cited by 1
Cited by
Carbon Capture From Flue Gas and the Atmosphere: A Perspective
Wang, X., & Song, C. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.560849 · Cited by 428
Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications.
Lawson, S., Li, X., Thakkar, H., Rownaghi, A. A., & Rezaei, F. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00060 · Cited by 341
Self-citationPresent and future of MOF research in the field of adsorption and molecular separation
Petit, C. (2018) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2018.04.004 · Cited by 292
Shaping the Future of Fuel: Monolithic Metal–Organic Frameworks for High-Density Gas Storage
Connolly, B. M., Madden, D. G., Wheatley, A. E. H., & Fairen-Jimenez, D. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c00270 · Cited by 274
Soliman, A., AlAmoodi, N., Karanikolos, G. N., Doumanidis, C. C., & Polychronopoulou, K. (2020) · Nanomaterials · doi:10.3390/nano10112198 · Cited by 53
Metadata
- Authors
- Thakkar, H., Eastman, S., Al-Naddaf, Q., Rownaghi, A. A., & Rezaei, F.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-10-03
- Volume
- 9
- Issue
- 41
- Pages
- 35908-35916
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2760030297
- Cited by
- 298
- References
- 32
- FWCI
- 9.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.