Biomimetic Inks Based on Cellulose Nanofibrils and Cross-Linkable Xylans for 3D Printing
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
This paper presents a sustainable all-wood-based ink which can be used for 3D printing of constructs for a large variety of applications such as clothes, furniture, electronics, and health care products with a customized design and versatile gel properties. The 3D printing technologies where the material is dispensed in the form of liquids, so called inks, have proven suitable for 3D printing dispersions of cellulose nanofibrils (CNFs) because of their unique shear thinning properties. In this study, novel inks were developed with a biomimetic approach where the structural properties of cellulose and the cross-linking function of hemicelluloses that are found in the plant cell wall were utilized. The CNF was mixed with xylan, a hemicellulose extracted from spruce, to introduce cross-linking properties which are essential for the final stability of the printed ink. For xylan to be cross-linkable, it was functionalized with tyramine at different degrees. Evaluation of different ink compositions by rheology measurements and 3D printing tests showed that the degree of tyramine substitution and the ratio of CNFs to xylan-tyramine in the prepared inks influenced the printability and cross-linking density. Both two-layered gridded structures and more complex 3D constructs were printed. Similarly to conventional composites, the interactions between the components and their miscibility are important for the stability of the printed and cross-linked ink. Thus, the influence of tyramine on the adsorption of xylan to cellulose was studied with a quartz crystal microbalance to verify that the functionalization had little influence on xylan's adsorption to cellulose. Utilizing xylan-tyramine in the CNF dispersions resulted in all-wood-based inks which after 3D printing can be cross-linked to form freestanding gels while at the same time, the excellent printing properties of CNFs remain intact.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Self-citationThe role of biomass and bioenergy in a future bioeconomy: policies and facts
Scarlat, N., Dallemand, J.-F., Monforti-Ferrario, F., & Nita, V. (2015) · Environmental Development · doi:10.1016/j.envdev.2015.03.006 · Cited by 895
Cited by
Cellulose nanocrystals and cellulose nanofibrils based hydrogels for biomedical applications
Du, H., Liu, W., Zhang, M., Si, C., Zhang, X., & Li, B. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.01.020 · Cited by 949
Recent trends in bioinks for 3D printing
Gopinathan, J., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 846
Hemicellulose: Structure, chemical modification, and application
Rao, J., Lv, Z., Chen, G., & Peng, F. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101675 · Cited by 508
Current advances and future perspectives of 3D printing natural-derived biopolymers
Liu, J., Sun, L., Xu, W., Wang, Q., Yu, S., & Sun, J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.077 · Cited by 428
Assessment methodologies for extrusion-based bioink printability
Gillispie, G., Prim, P., Copus, J., Fisher, J., Mikos, A. G., Yoo, J. J., Atala, A., & Lee, S. J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6f0d · Cited by 426
3D printing using plant-derived cellulose and its derivatives: A review
Dai, L., Cheng, T., Duan, C., Zhao, W., Zhang, W., Zou, X., Aspler, J., & Ni, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.027 · Cited by 340
3D printing with cellulose materials
Wang, Q., Sun, J., Yao, Q., Ji, C., Liu, J., & Zhu, Q. (2018) · Cellulose · doi:10.1007/s10570-018-1888-y · Cited by 324
Rheological Aspects of Cellulose Nanomaterials: Governing Factors and Emerging Applications
Li, M., Wu, Q., Moon, R. J., Hubbe, M. A., & Bortner, M. J. (2021) · Advanced Materials · doi:10.1002/adma.202006052 · Cited by 324
Comprehensive review on nanocellulose: Recent developments, challenges and future prospects
Thomas, P., Duolikun, T., Rumjit, N. P., Moosavi, S., Lai, C. W., Bin Johan, M. R., & Fen, L. B. (2020) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2020.103884 · Cited by 304
Xu, W., Molino, B. Z., Cheng, F., Molino, P. J., Yue, Z., Su, D., Wang, X., Willför, S., Xu, C., & Wallace, G. G. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b21268 · Cited by 263
Physical and Chemical Factors Influencing the Printability of Hydrogel-based Extrusion Bioinks
Lee, S. C., Gillispie, G., Prim, P., & Lee, S. J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00015 · Cited by 255
3D printing to innovate biopolymer materials for demanding applications: A review
Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B., & Xie, F. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100459 · Cited by 142
Metadata
- Authors
- Markstedt, K., Escalante, A., Toriz, G., & Gatenholm, P.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-11-07
- Volume
- 9
- Issue
- 46
- Pages
- 40878-40886
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2767160611
- Cited by
- 143
- References
- 5
- FWCI
- 4.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.