The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing
Abstract
The three-dimensional (3D) printing of flexible and stretchable materials with smart functions such as shape memory (SM) and self-healing (SH) is highly desirable for the development of future 4D printing technology for myriad applications, such as soft actuators, deployable smart medical devices, and flexible electronics. Here, we report a novel ink that can be used for the 3D printing of highly stretchable, SM, and SH elastomer via UV-light-assisted direct-ink-write printing. An ink containing urethane diacrylate and a linear semicrystalline polymer is developed for the 3D printing of a semi-interpenetrating polymer network elastomer that can be stretched by up to 600%. The 3D-printed complex structures show interesting functional properties, such as high strain SM and SM -assisted SH capability. We demonstrate that such a 3D-printed SM elastomer has the potential application for biomedical devices, such as vascular repair devices. This research paves a new way for the further development of novel 4D printing, soft robotics, and biomedical devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Autonomic healing of polymer composites
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N., & Viswanathan, S. (2001) · Nature · doi:10.1038/35057232 · Cited by 4,575
A Thermally Re-mendable Cross-Linked Polymeric Material
Chen, X., Dam, M. A., Ono, K., Mal, A., Shen, H., Nutt, S. R., Sheran, K., & Wudl, F. (2002) · Science · doi:10.1126/science.1065879 · Cited by 2,645
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Light-induced shape-memory polymers
Lendlein, A., Jiang, H., Jünger, O., & Langer, R. (2005) · Nature · doi:10.1038/nature03496 · Cited by 2,006
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
A highly stretchable autonomous self-healing elastomer
Li, C.-H., Wang, C., Keplinger, C., Zuo, J.-L., Jin, L., Sun, Y., Zheng, P., Cao, Y., Lissel, F., Linder, C., et al. (2016) · Nature Chemistry · doi:10.1038/nchem.2492 · Cited by 1,496
Zhao, Q., Qi, H. J., & Xie, T. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.001 · Cited by 1,409
Self-citationTunable polymer multi-shape memory effect
Xie, T. (2010) · Nature · doi:10.1038/nature08863 · Cited by 1,380
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Self-citationThree-dimensional (3D) printed scaffold and material selection for bone repair
Zhang, L., Yang, G., Johnson, B. N., & Jia, X. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.039 · Cited by 865
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Lai, Y., Kuang, X., Zhu, P., Huang, M., Dong, X., & Wang, D. (2018) · Advanced Materials · doi:10.1002/adma.201802556 · Cited by 686
Self-citationIntrinsically Self-Healing Polymers: From Mechanistic Insight to Current Challenges
Li, B., Cao, P.-F., Saito, T., & Sokolov, A. P. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00575 · Cited by 571
Evolution of self-healing elastomers, from extrinsic to combined intrinsic mechanisms: a review
Utrera-Barrios, S., Verdejo, R., López-Manchado, M. A., & Hernández Santana, M. (2020) · Materials Horizons · doi:10.1039/d0mh00535e · Cited by 487
Projection micro stereolithography based 3D printing and its applications
Ge, Q., Li, Z., Wang, Z., Kowsari, K., Zhang, W., He, X., Zhou, J., & Fang, N. X. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab8d9a · Cited by 444
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
Shape‐Memory Polymers for Biomedical Applications
Delaey, J., Dubruel, P., & Van Vlierberghe, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909047 · Cited by 407
Lu, Y., Biswas, M. C., Guo, Z., Jeon, J.-W., & Wujcik, E. K. (2019) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2018.08.037 · Cited by 391
Four-dimensional bioprinting: Current developments and applications in bone tissue engineering
Wan, Z., Zhang, P., Liu, Y., Lv, L., & Zhou, Y. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.10.038 · Cited by 368
Seoane-Viaño, I., Januskaite, P., Alvarez-Lorenzo, C., Basit, A. W., & Goyanes, A. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.02.027 · Cited by 357
3D Printing Materials for Soft Robotics
Sachyani Keneth, E., Kamyshny, A., Totaro, M., Beccai, L., & Magdassi, S. (2021) · Advanced Materials · doi:10.1002/adma.202003387 · Cited by 356
Nielsen, A. V., Beauchamp, M. J., Nordin, G. P., & Woolley, A. T. (2020) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-091619-102649 · Cited by 339
Direct Ink Writing Based 4D Printing of Materials and Their Applications
Wan, X., Luo, L., Liu, Y., & Leng, J. (2020) · Advanced Science · doi:10.1002/advs.202001000 · Cited by 337
Roach, D. J., Yuan, C., Kuang, X., Li, V. C.-F., Blake, P., Romero, M. L., Hammel, I., Yu, K., & Qi, H. J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04401 · Cited by 319
Self-citation3D printing for polymer/particle-based processing: A review
Xu, W., Jambhulkar, S., Zhu, Y., Ravichandran, D., Kakarla, M., Vernon, B., Lott, D. G., Cornella, J. L., Shefi, O., Miquelard-Garnier, G., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109102 · Cited by 318
3D printing of functional microrobots
Li, J., & Pumera, M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01062f · Cited by 303
A transparent, highly stretchable, self-healing polyurethane based on disulfide bonds
Chang, K., Jia, H., & Gu, S.-Y. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.11.005 · Cited by 299
4D printing of materials for the future: Opportunities and challenges
Joshi, S., Rawat, K., C, K., Rajamohan, V., Mathew, A. T., Koziol, K., Kumar Thakur, V., & A.S.S, B. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100490 · Cited by 288
Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing
Rastogi, P., & Kandasubramanian, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.085 · Cited by 267
Clickable PEG hydrogel microspheres as building blocks for 3D bioprinting
Xin, S., Chimene, D., Garza, J. E., Gaharwar, A. K., & Alge, D. L. (2019) · Biomaterials Science · doi:10.1039/c8bm01286e · Cited by 263
Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing
Li, L., Lin, Q., Tang, M., Duncan, A. J. E., & Ke, C. (2019) · Chemistry – A European Journal · doi:10.1002/chem.201900975 · Cited by 258
4D Printing for Biomedical Applications
Yarali, E., Mirzaali, M. J., Ghalayaniesfahani, A., Accardo, A., Diaz‐Payno, P. J., & Zadpoor, A. A. (2024) · Advanced Materials · doi:10.1002/adma.202402301 · Cited by 257
Mechanical Models, Structures, and Applications of Shape-Memory Polymers and Their Composites
Xin, X., Liu, L., Liu, Y., & Leng, J. (2019) · Acta Mechanica Solida Sinica · doi:10.1007/s10338-019-00103-9 · Cited by 115
Milazzo, M., & Libonati, F. (2022) · Advanced Intelligent Systems · doi:10.1002/aisy.202100278 · Cited by 43
Metadata
- Authors
- Kuang, X., Chen, K., Dunn, C. K., Wu, J., Li, V. C. F., & Qi, H. J.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-02-19
- Volume
- 10
- Issue
- 8
- Pages
- 7381-7388
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2790554408
- Cited by
- 523
- References
- 46
- FWCI
- 28.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.