CoChat

Multifunctional Wearable Sensing Devices Based on Functionalized Graphene Films for Simultaneous Monitoring of Physiological Signals and Volatile Organic Compound Biomarkers

Xu, Hua, Xiang, Jian Xin, Lu, Yi Fei, Zhang, Ming Kun, Li, Jia Jia, Gao, Bing Bing, Zhao, Yuan Jin, Gu, Zhong Ze · 2018 · ACS Applied Materials & Interfaces
Cited by 101

The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.

Abstract

In this study, a multifunctional wearable sensing device based on two different graphene films is fabricated and can achieve the simultaneous detection of physiological signals and volatile organic compound (VOC) biomarkers without mutual signal interference. The wearable device was designed with two sensing components: on the upper layer of the device, four kinds of porphyrin-modified reduced graphene oxide (rGO) films were prepared and used for a sensor array that could sufficiently react with VOC vapors to achieve highly sensitive detection. A porous rGO film was designed on the underlayer of the device and used as a strain-sensing matrix, which could be closely attached to the skin to achieve a highly sensitive detection of the physiological signal. A polyimide film between the two sensing components was used not only as a flexible substrate, but also as a protective layer to avoid the porous rGO film's response to VOC molecules. Investigation of the detection ability showed that the porous rGO strain-sensing matrix can achieve a higher gauge factor (282.28) than the unstructured rGO counterpart (8.96) and is more desirable for the detection of physiological motion. In contrast, the porphyrin-modified rGO sensor array displayed a superior response to VOC vapors, and eight different VOC biomarkers could be detected and discriminated using the as-prepared sensor array together with a pattern recognition approach. The multifunctional sensing devices displayed excellent ability for the detection of a variety of human physiological signals, such as pulse and respiration rates. Simultaneous analysis of simulated diabetic breath samples, simulated nephrotic breath samples, and breath samples exhaled by healthy individuals using our wearable device exhibited clear identification and discrimination. Our study provides new insights into fabrication and design of multifunctional sensing devices without signal interference, and the application of the proposed devices are promising in preventive medicine and health care.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acsami.8b00073

Cites

9 of 9 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 101

Metadata

Authors
Xu, H., Xiang, J. X., Lu, Y. F., Zhang, M. K., Li, J. J., Gao, B. B., Zhao, Y. J., & Gu, Z. Z.
Venue
ACS Applied Materials & Interfaces
Published
2018-03-19
Volume
10
Issue
14
Pages
11785-11793
ISSN
  • 1944-8244 (ISSN-L)
  • 1944-8252
OpenAlex
W2792000460
Cited by
101
References
9
FWCI
5.19
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.