Multifunctional Wearable Sensing Devices Based on Functionalized Graphene Films for Simultaneous Monitoring of Physiological Signals and Volatile Organic Compound Biomarkers
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
In this study, a multifunctional wearable sensing device based on two different graphene films is fabricated and can achieve the simultaneous detection of physiological signals and volatile organic compound (VOC) biomarkers without mutual signal interference. The wearable device was designed with two sensing components: on the upper layer of the device, four kinds of porphyrin-modified reduced graphene oxide (rGO) films were prepared and used for a sensor array that could sufficiently react with VOC vapors to achieve highly sensitive detection. A porous rGO film was designed on the underlayer of the device and used as a strain-sensing matrix, which could be closely attached to the skin to achieve a highly sensitive detection of the physiological signal. A polyimide film between the two sensing components was used not only as a flexible substrate, but also as a protective layer to avoid the porous rGO film's response to VOC molecules. Investigation of the detection ability showed that the porous rGO strain-sensing matrix can achieve a higher gauge factor (282.28) than the unstructured rGO counterpart (8.96) and is more desirable for the detection of physiological motion. In contrast, the porphyrin-modified rGO sensor array displayed a superior response to VOC vapors, and eight different VOC biomarkers could be detected and discriminated using the as-prepared sensor array together with a pattern recognition approach. The multifunctional sensing devices displayed excellent ability for the detection of a variety of human physiological signals, such as pulse and respiration rates. Simultaneous analysis of simulated diabetic breath samples, simulated nephrotic breath samples, and breath samples exhaled by healthy individuals using our wearable device exhibited clear identification and discrimination. Our study provides new insights into fabrication and design of multifunctional sensing devices without signal interference, and the application of the proposed devices are promising in preventive medicine and health care.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Trung, T. Q., & Lee, N. (2016) · Advanced Materials · doi:10.1002/adma.201504244 · Cited by 2,160
Wearable Chemical Sensors: Present Challenges and Future Prospects
Bandodkar, A. J., Jeerapan, I., & Wang, J. (2016) · ACS Sensors · doi:10.1021/acssensors.6b00250 · Cited by 778
Liu, Q., Chen, J., Li, Y., & Shi, G. (2016) · ACS Nano · doi:10.1021/acsnano.6b03813 · Cited by 609
Sensors for Breath Testing: From Nanomaterials to Comprehensive Disease Detection
Konvalina, G., & Haick, H. (2014) · Accounts of Chemical Research · doi:10.1021/ar400070m · Cited by 561
Highly Stretchy Black Gold E‐Skin Nanopatches as Highly Sensitive Wearable Biomedical Sensors
Gong, S., Lai, D. T. H., Su, B., Si, K. J., Ma, Z., Yap, L. W., Guo, P., & Cheng, W. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201400063 · Cited by 461
Pang, Y., Tian, H., Tao, L., Li, Y., Wang, X., Deng, N., Yang, Y., & Ren, T.-L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08172 · Cited by 456
A Flexible Bimodal Sensor Array for Simultaneous Sensing of Pressure and Temperature
Tien, N. T., Jeon, S., Kim, D., Trung, T. Q., Jang, M., Hwang, B., Byun, K., Bae, J., Lee, E., Tok, J. B. ‐., et al. (2014) · Advanced Materials · doi:10.1002/adma.201302869 · Cited by 438
Advanced Materials for Health Monitoring with Skin‐Based Wearable Devices
Jin, H., Abu‐Raya, Y. S., & Haick, H. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700024 · Cited by 317
Cited by
Lim, H., Kim, H. S., Qazi, R., Kwon, Y., Jeong, J., & Yeo, W. (2020) · Advanced Materials · doi:10.1002/adma.201901924 · Cited by 1,002
Significance of Nanomaterials in Wearables: A Review on Wearable Actuators and Sensors
Jayathilaka, W. A. D. M., Qi, K., Qin, Y., Chinnappan, A., Serrano‐García, W., Baskar, C., Wang, H., He, J., Cui, S., Thomas, S. W., et al. (2019) · Advanced Materials · doi:10.1002/adma.201805921 · Cited by 627
Sensors for Volatile Organic Compounds
Khatib, M., & Haick, H. (2022) · ACS Nano · doi:10.1021/acsnano.1c10827 · Cited by 533
Graphene-based wearable piezoresistive physical sensors
Zheng, Q., Lee, J.-H., Shen, X., Chen, X., & Kim, J.-K. (2020) · Materials Today · doi:10.1016/j.mattod.2019.12.004 · Cited by 486
Graphene-Based Sensors for Human Health Monitoring
Huang, H., Su, S., Wu, N., Wan, H., Wan, S., Bi, H., & Sun, L. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00399 · Cited by 330
Guo, Y., Wei, X., Gao, S., Yue, W., Li, Y., & Shen, G. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104288 · Cited by 279
Recent Progress in Sensor Arrays: From Construction Principles of Sensing Elements to Applications
Li, T., Zhu, X., Hai, X., Bi, S., & Zhang, X. (2023) · ACS Sensors · doi:10.1021/acssensors.2c02596 · Cited by 257
Metal-organic framework nanosheets: An emerging family of multifunctional 2D materials
Duan, J., Li, Y., Pan, Y., Behera, N., & Jin, W. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.05.018 · Cited by 255
Khan, S., Ali, S., & Bermak, A. (2019) · Sensors · doi:10.3390/s19051230 · Cited by 253
Recent Advances in Intelligent Wearable Medical Devices Integrating Biosensing and Drug Delivery
Tan, M., Xu, Y., Gao, Z., Yuan, T., Liu, Q., Yang, R., Zhang, B., & Peng, L. (2022) · Advanced Materials · doi:10.1002/adma.202108491 · Cited by 187
Bag, A., Moon, D.-B., Park, K.-H., Cho, C.-Y., & Lee, N.-E. (2019) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2019.126684 · Cited by 55
Metadata
- Authors
- Xu, H., Xiang, J. X., Lu, Y. F., Zhang, M. K., Li, J. J., Gao, B. B., Zhao, Y. J., & Gu, Z. Z.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-03-19
- Volume
- 10
- Issue
- 14
- Pages
- 11785-11793
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2792000460
- Cited by
- 101
- References
- 9
- FWCI
- 5.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.